Mode selection of Lamb waves for the evaluation of solid plates with liquid loading

This paper studies the mode selection of Lamb waves for evaluating solid plates with liquid loading. For this purpose, the Lamb wave selected should have the features such as zero normal displacement components at the plate surface in contact with liquid, small dispersion, and maximum group velocity. It is found that when the phase velocity of Lamb wave is equal to the longitudinal wave velocity of the plate material, its normal displacement at the plate surface is always zero. Through the numerical analyses, the specific S₂ Lamb wave that has zero normal displacement component at the plate surface, small dispersion and maximum group velocity compared with the other Lamb waves has been found. With respect to the specific S₂ Lamb wave, some experimental examinations have been carried out. It is found that the liquid loading on the plate surface has less influence on the specific S₂ Lamb wave signal but it can effectively eliminate the other signals. Moreover, the specific S₂ Lamb wave selected exhibits the capability of detecting multiple defects in the solid plate with the liquid loading. It can be concluded that the specific S₂ Lamb wave selected is suitable for the evaluation of solid plates with liquid loading.     

Importance of the near Lamb mode imaging of multilayered composite plates.

In recent years Lamb waves are being used for internal defect detection in multilayered composite plates. Different Lamb modes generate various stress levels in different layers. As a result, all Lamb modes are not equally sensitive to internal defects of various layers. A number of studies have been carried out to identify which Lamb mode is most effective for detecting defects in a specific layer. However, one shortcoming of the Lamb wave inspection technique is that in a symmetrically layered composite plate stress and displacement magnitudes and energy distribution profiles for all Lamb modes are symmetric about the central plane of the plate. As a result, the ability of a Lamb mode to detect defects in a specific layer of the plate is identical to its ability to detect defects in the corresponding layer of mirror symmetry. Hence, from the Lamb wave generated image one cannot distinguish between the defects in these two layers of mirror symmetry. In this paper it is investigated how by fine-tuning the frequency and the striking angle of the incident beam in the neighborhood of a Lamb mode one can separately detect internal defects in layers of mirror symmetry in the upper and lower halves of a plate.     

复合兰姆波声子晶体中超宽部分禁带

兰姆波在声子晶体薄板中的传播特性因其在无损检测、 减振技术和传感器件等领域的潜在应用价值而受到越来越多的关注. 本文采用超原胞平面波展开法和有限元法系统地研究了复合对称结构声子晶体薄板中的兰姆波超宽部分禁带. 结果表明: 对于在薄板侧面对称地嵌入双层矩形空气柱构成的复杂系统, 低阶兰姆波部分带隙结构极为丰富. 将晶格常数(L)和板厚(H) 比值具有匹配关系的兰姆波声子晶体衔接构成复合结构, 低阶兰姆波部分禁带宽度因各组分结构的部分禁带交叠而得到显著拓宽, 可在低频超宽频带内实现对特定低阶兰姆波模式良好的模式选择功能. 该研究结果对兰姆波缺陷无损检测中模式优化选择及兰姆波单向导通器件设计等方面具有重要意义.     

不锈钢折弯板裂纹Lamb波检测技术*

金属弯板广泛应用于车辆、船舶、飞机等大型装备结构件中，折弯处易形成应力集中产生裂纹，直接影响构件的使用安全和寿命。本文开展了不锈钢弯板裂纹缺陷Lamb波检测技术研究，计算了钢板的频散曲线，优选三种不同频率的S0模态：0.25MHz、0.5MHz、1MHz。利用COMSOL软件建立频域仿真模型，模拟了Lamb波在3mm厚“L”形弯板内部的传播情况，开展折弯板裂纹缺陷检测实验，并使用小波包变换的方法对实验信号进行分析。结果表明，经小波变换后，0.25MHz、0.5MHz、1 MHz的S0模态Lamb波均可用于裂纹缺陷的识别检测.     

Normal mode expansion method for laser-generated ultrasonic Lamb waves in orthotropic thin plates

A quantitative theory for modeling the laser-generated transient ultrasonic Lamb waves, which propagates along arbitrary directions in orthotropic plates, is presented by employing an expansion method of generalized Lamb wave modes. The displacement field is expressed by a summation of the symmetric and antisymmetric modes in the surface stress-free orthotropic plate, and therefore the theory is particularly appropriate for waveform analyses of Lamb waves in thin plates because one needs only to evaluate several lower modes. The transient waveforms excited by the thermoelastic expansion and the oil-coating evaporation are analyzed for a transversely isotropic thin plate. The results show that the theory provides a quantitative analysis to characterize anisotropic elastic stiffness properties of orthotropic plates by laser-generated Lamb wave detection.     

Micro-crack detection of nonlinear Lamb wave propagation in three-dimensional plates with mixed-frequency excitation

We propose a nonlinear ultrasonic technique by using the mixed-frequency signals excited Lamb waves to conduct micro-crack detection in thin plate structures. Simulation models of three-dimensional(3D) aluminum plates and composite laminates are established by ABAQUS software, where the aluminum plate contains buried crack and composite laminates comprises cohesive element whose thickness is zero to simulate delamination damage. The interactions between the S_0 mode Lamb wave and the buried micro-cracks of various dimensions are simulated by using the finite element method.Fourier frequency spectrum analysis is applied to the received time domain signal and fundamental frequency amplitudes,and sum and difference frequencies are extracted and simulated. Simulation results indicate that nonlinear Lamb waves have different sensitivities to various crack sizes. There is a positive correlation among crack length, height, and sum and difference frequency amplitudes for an aluminum plate, with both amplitudes decreasing as crack thickness increased, i.e.,nonlinear effect weakens as the micro-crack becomes thicker. The amplitudes of sum and difference frequency are positively correlated with the length and width of the zero-thickness cohesive element in the composite laminates. Furthermore,amplitude ratio change is investigated and it can be used as an effective tool to detect inner defects in thin 3D plates.     

多通道超声兰姆波检测板状结构中的裂纹

超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。     

Calculation of leaky Lamb waves with a semi-analytical finite element method

A semi-analytical finite element method (SAFE) has been widely used for calculating dispersion curves and mode shapes of guided waves as well as transient waves in a bar like structures. Although guided wave inspection is often conducted for water-loaded plates and pipes, most of the SAFE techniques have not been extended to a plate with leaky media. This study describes leaky Lamb wave calculation with the SAFE. We formulated a new solution using a feature that a single Lamb wave mode generates a harmonic plane wave in leaky media. Dispersion curves obtained with the SAFE agreed well with the previous theoretical studies, which represents that the SAFE calculation was conducted with sufficient accuracy. Moreover, we discussed dispersion curves, attenuation curves, and displacement distributions for total transmission modes and leaky plate modes in a single side and both two side water-loaded plate.     

轨道板中超声兰姆波传播的有限元计算和实验*

该文针对我国高速铁路轨道板缺陷的非接触动态检测问题,研究了空气耦合超声兰姆波在轨道板中的传播规律。首先,给出了轨道板中超声兰姆波的相速度和群速度频散曲线,结果表明:随着频厚积的增加,频散现象越明显,并且A0相速度收敛于Rayleigh波的波速。然后,建立轨道板中波传播的有限元模型,计算得到兰姆波传播的群速度为2220 m/s,且二维傅里叶变换系数的较大值沿Rayleigh波的频散曲线分布。最后,在沪杭高铁嘉兴南站进行了现场测试,以8.8°倾斜角向轨道板激励产生超声兰姆波,激发产生的兰姆波模态群速度为2325 m/s,且二维傅里叶变换分析其系数的较大值沿Rayleigh波的频散曲线分布。有限元计算结果和实验结果均与理论计算结果一致。该研究为后续轨道板缺陷的非接触动态检测提供了理论依据和实验方法。     

金属板疲劳损伤非线性兰姆波混频检测

针对金属板结构安全运行需要,开展了金属板结构疲劳损伤非线性兰姆波混频检测方法研究.通过数值仿真,研究了两列A0兰姆波与材料损伤间的非线性相互作用.结果 表明,两列共线A0兰姆波在结构材料损伤处产生单向传播的和频S0波,且和频波幅值随传播距离具有积累增长效应.对不同疲劳程度金属板试件进行了共线混频兰姆波检测实验,结果表明...     

The propagation of Lamb waves in a plate bordered with layers of a liquid.

The influence of liquid layers on the propagation of Lamb waves in a plate of finite thickness is studied theoretically. The dispersion equations of Lamb waves in a plate bordered with layers of liquids are derived. Numerical solutions of the equations show that the phase velocity of Lamb waves changes with the thickness of the liquid layers. For the lowest antisymmetrical mode of very thin plates, the numerical results calculated from the dispersion equations are compared with those derived from the bending wave acoustic impedance approach. The limitation of the latter is discussed. Applications of Lamb waves pertinent to biosensing are also presented.     

Study of the influence of thin layer loading on the propagation of Lamb waves using perturbation method

I.IntroductionSincethepublicationoftheclassicalpaper"Onthewavesinanelasticplate"byH.Lambin1917l1l,theterm"LaInbwave"hasbeenusedtorefertoanelasticdisturbancepropagatinginasolidplatewithfreeboundaries.Lambwavesarewidelyusedintheapplicationsofthedefectinspectionofthinwa.lledmaterial[2'8].InrecelltyearsLambwaveshavebeenwide1yusedinthefabricationofsensors.LamInwavesensorsdetectthechangesofenvironmentbymeasuringthechangeofphasevelocityofLambwaves.IncomparisonwithbuIkwavesandSAW's,Lambwavsprovi…     

Evaluation of beryllium stiffening on zirconium plate using backscattered leaky Lamb waves

The ultrasonic backscattering profiles of the Zr plates with/without Be-Zr alloy layer were measured at various incidence positions to evaluate the embedded Be diffusion layer on the Zr plate. Four principal subprofiles of backward ultrasound radiated from leaky Lamb waves were observed. The angles and the intensities of the subprofile peaks decreased due to the stiffening effect of Be layer. The generation and change of subprofiles can be explained by the influence of acoustical properties, collective group velocities and leaky factors of plates. It is suggested that the backward radiation subprofile is an effective tool for the evaluation of thin diffusion layers on plates.     

Anisotropy of Lamb and SH waves propagation in langasite single crystal plates under the influence of dc electric field

Paper is presented the results of computer simulation. Effect of the homogeneous dc electric field influence on the propagation of zero and first order Lamb and SH waves in piezoelectric langasite single crystal plates for a lot of cuts and directions have been calculated. Crystalline directions and cuts with maximal and minimal influence of dc electric field have indicated. Effect of hybridization of plate modes has been discussed.     

Lamb waves in anisotropic plates (review)

Propagation of Lamb waves in elastic anisotropic plates is studied in the framework of the six-dimensional Cauchy formalism. Closed-form secular equations for dispersion curves for Lamb waves propagating in a plate with arbitrary elastic anisotropy are obtained.     

套管中模式波的响应特征*

在固井质量评价中主要利用套管中模式波的幅度或衰减变化反映水泥的胶结状况,不同测井仪器在套管中激发的模式波的类型不同,研究套管中各模式波的传播特征和影响因素可充分挖掘测量数据的潜在应用价值。CBL和SBT等测井仪器在套管中主要激发拉伸波,类同于平板中的零阶对称Lamb波,水泥环封隔测井仪器的斜入射模式在套管中主要激发套管弯曲波,类同于平板中的零阶反对称Lamb波,垂直入射模式激发套管共振波,类同于平板中的高阶对称Lamb波。该文重点分析了这些模式波的衰减特征及其对微环的响应,套管弯曲波在套后耦合轻质水泥时对微环不敏感,但在套后耦合常规水泥或重水泥时,其衰减明显高于胶结良好的状况;拉伸波对微环的存在最为敏感;套管共振波对微环不敏感。     

Lamb waves optical detection in fused silica

An optical technique has been used for visualizing Lamb waves in transparent plates, that exploits the change of polarization induced on the diffracted light by the shear strain field produced by the acoustic perturbation. Stationary Lamb waves in fused silica samples have been analyzed and simple reasoning permitted to determine which specific mode was excited.     

三层介质超声谐振模式随材料和界面粘接性能变化的演变规律

在用超声波谐振对粘接材料的粘接强度进行无损评估时, 不同模式对粘接强度的敏感程度受到众多因素和参数的影响, 对检测结果的可靠性至关重要. 基于多层介质中声传播和界面弱粘接边界条件的理论模型, 将一个上下非对称的金属-粘接剂-金属三层结构的平面波反射系数函数中的谐振模式看作是上下铝金属层各自的Lamb波频散模式通过夹心粘接剂层相互耦合后叠加组成. 改变影响结构粘接强度的因素, 即粘接剂的性能参数(声阻抗、密度、厚度)和界面切向劲度系数k_t来分析三层结构谐振模式耦合方式的变化,得出结论: 粘接结构粘接性能的变化基本上不改变与被粘铝层相关的固有部分的Lamb波模式, 而它们的耦合模式则在谐振频率上产生平移并会与固有模式进行交换和替代; 不同参数的变化引起的模式演变有各自的规律, 大多可彼此区分.     

Elastic constants determination by direct measurement of the beat wavelength between A0 and S0 Lamb modes with pulsed TV holography

A whole-field optical technique of high sensitivity, namely pulsed TV holography with phase evaluation by the Spatial Fourier Transform Method, is applied to the acquisition of instantaneous displacement fields of ultrasonic Lamb waves in aluminium plates a few millimetres thick. Two Lamb modes, the A0 and S0 ones, are simultaneously generated in the plate, producing a clear beating. Several values of the beat wavelength, corresponding to different excitation frequencies, are obtained by direct measurement of the distance between nodes in the wave field. The obtained values are fitted to the theoretical Rayleigh–Lamb frequency spectrum in order to determine the elastic constants of the plate material. We conclude that it is necessary to know the value of another parameter to univocally solve the problem, and so the bulk longitudinal wave velocity is measured by the pulse-echo method. Then the Poisson's ratio is obtained and, from these two parameters, the Young's modulus can also be determined.     

Cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate

The physical process of cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate is presented by using the second-order perturbation and the technique of nonlinear reflection of acoustic waves at an interface. In general, the cumulative second-harmonic generation of a dispersive guided wave propagation does not occur. However, the present paper shows that the second-harmonic of Lamb wave propagation arising from the nonlinear interaction of the partial bulk acoustic waves and the restriction of the three boundaries of the solid plates does have a cumulative growth effect if some conditions are satisfied. Through boundary condition and initial condition of excitation, the analytical expression of cumulative second-harmonic of Lamb waves propagation is determined. Numerical results show the cumulative effect of Lamb waves on second-harmonic field patterns.