Asymmetric transfer hydrogenation of ketones using Ru(0) nanoparticles modified by Chiral Thiones

The catalytic asymmetric transfer hydrogenation (ATH) of acetophenone in isopropanol by Ru(0) nanoparticles (NPs) obtained by the in‐situ reduction of Ru (II) half‐sandwich complexes of chiral 2‐oxazolidinethiones and 2‐thiozolidinethiones was examined and compared with the catalytic activity of Ru(0) NPs formed in‐situ by the reduction of [Ru(p‐cymene)(Cl)₂]₂ in presence of optically active ligands such as (S)‐4‐isobutylthiazolidine‐2‐thione, (S)‐4‐Isopropyl‐2(?2‐pyridinyl)‐2‐oxazoline, (8S, 9R)‐(?)‐cinchonidine, (S)‐leucinol, (S)‐phenylalaninol, and (S)‐leucine. Three of the best catalytic systems were then examined for ATH of thirteen aromatic ketones with different electronic and steric properties. A maximum of 24% ee was obtained using NPs generated from the Ru (II) half‐sandwich complex with (S)‐4‐isobutylthiazolidine‐2‐thione in the TH of acetophenone. The NPs were characterized by TEM and DLS measurements. Kinetic studies and poisoning experiments confirmed that the reaction is catalyzed by the chiral NPs formed in‐situ. Complete characterization of the complexes, including the X‐ray crystallographic characterization of two complexes, was also carried out.     

Mechanical and fire retardant properties of EVA/clay/ATH nanocomposites - Effect of particle size and surface treatment of ATH filler

Mechanical and flame retardant properties of ethylene vinyl acetate (EVA) copolymer/organoclay/alumina trihydrate (ATH) nanocomposites have been studied. ATH with different particle sizes, ATH1 (2.2-5.2 μm) and ATH2 (1.5-3.5 μm), and three different surface treatments, uncoated, fatty acid coated and silane coated, have been used. A synergistic effect was observed in EVA/organoclay/ATH nanocomposites with the total heat evolved (THE) and the heat release rate (HRR) lower than that of EVA/ATH composite. It was also found that mechanical and flame retardant properties are affected in different ways by the particle size and the surface treatment of ATH fillers. Improvements in tensile and flame retardant properties were observed in nanocomposites when uncoated ATH fillers and fatty acid coated ATH2 filler were used. On the other hand, silane coating on ATH1 and ATH2 improves limiting oxygen index (LOI) and leads to higher t_ignition and the best char stability after cone calorimeter test.     

Structural determination of two new sesquiterpenes biotransformed from germacrone by Mucor alternata

Eight transformed sesquiterpenes of germacrone by Mucor alternata were obtained. Their structures were characterized on the basis of spectral methods including 2D NMR. Among them, (1S, 4S, 5S, 10R)-isozedoarondiol (2) and (1R, 4S, 5S, 10R)-diepoxy-12-hydroxygermacrone (3) are new compounds.     

Azoalkanes—novel flame retardants and their structure–property relationship

A number of symmetrical and unsymmetrical azoalkanes of the general formula R′?N = N?R and related azoxy, hydrazone as well as azine derivatives have been synthesized in order to assess their potential as novel flame retardants for polypropylene alone or in combination with commercially available flame retardants such as alumina trihydrate (ATH), decabromodiphenyl ether (DecaBDE) and tris(3‐bromo‐2,2‐bis(bromomethyl)‐propyl)phosphate (TBBPP). The experimental results show that in the series of different sized azocycloalkanes the flame retardant efficacy decreased in the following order: R = cyclohexyl > cyclopentyl > cyclobutyl > cyclooctanyl >> cyclododecanyl. Whereas in the series of aliphatic azoalkanes compounds the efficacy decreased in the following order: R = n‐alkyl > tert‐butyl > tert‐octyl. In addition, also some of the prepared azoxy, azine, and hydrazone derivatives provide flame retardancy to polypropylene films at already very low concentrations (0.25–1 wt%). Noteworthy is that in contrast to other halogen‐free radical generators, the azoalkanes are also very effective as flame retardants in polypropylene thick moldings. Interestingly, it was found that 4,4′‐bis(cyclohexylazocyclohexyl)‐methane) shows a strong synergistic effect with ATH. Thus, in the presence of 0.5 wt% of azoalkane the ATH loading could be reduced from 60 to 25 wt% and still UL94 V‐2 rating could be reached. Furthermore, the fire testing data reveal that azoalkanes show a synergistic effect with DecaBDE and when used in conjunction with very low loadings of TBBPP. Copyright © 2010 John Wiley & Sons, Ltd.     

Total selective synthesis of enantiopure O1-acyl-3-aminoalkane-1,2-diols by ring opening of aminoepoxides with carboxylic acids

[reaction: see text] Synthesis of (2R,3S)- or (2S,3S)-O1-acyl-3-aminoalkane-1,2-diols by ring opening of enantiopure (2R,1'S)- or (2S,1'S)-2-(1-aminoalkyl)epoxides 1 or 2, with carboxylic acids in the presence of BF3 x Et2O and chlorotrimethylsilane, is described. The conversion takes place with total selectivity and in good yield. In addition, (2R,3S)-O,O-diacyl-3-aminoalkane-1,2-diols 3 were also prepared from reaction of (2R,1'S)-2-(1-aminoalkyl)epoxides 1 with carboxylic acids under the same reaction conditions and without chlorotrimethylsilane. Mechanisms to explain both transformations are proposed.     

Antioxidant encapsulated porous poly(lactide-co-glycolide) microparticles for developing long acting inhalation system

The purpose of this study was to fabricate porous poly(lactide-co-glycolide) (PLGA) microparticles for efficient pulmonary deposition and increased therapeutic duration of the antioxidant anthocyanin (ATH). These microparticles were prepared by a water-in-oil-in-water (W(1)/O/W(2)) multi-emulsion method with vaporizing ammonium bicarbonate (AB) as a porogen and starch as a viscous additive. High porosity achieved by the decomposition reaction of AB to the base of ammonia, carbon dioxide, and water vapor at 50°C enabled efficient deposition of ATH throughout the entire lung in BALB/c mice. In addition, the porous microparticles incorporating starch showed sustained ATH release characteristics (up to 5 days) and protracted antioxidant activity (up to 5 days) for 2,2-diphenyl-1-pikryl-hydrazyl (DPPH) radicals, which was comparable to that of the porous microparticles without starch which completely released ATH in 2h. Furthermore, these porous microparticles incorporating starch led to longer ATH residence (up to 20 days) in in vivo lung epithelium. We believe that this system has great pharmaceutical potential as a long-acting antioxidant for continuously relieving oxidative stress in pulmonary diseases like chronic obstructive pulmonary disease (COPD).     

Rh III- and Ir III-catalyzed asymmetric transfer hydrogenation of ketones in water

Asymmetric transfer hydrogenation (ATH) of ketones by formate in neat water is shown to be viable with Rh-TsDPEN and Ir-TsDPEN catalysts, derived in situ from [Cp*MCl2]2 (M=Rh, Ir) and TsDPEN. A variety of ketones were reduced, including nonfunctionalized aryl ketones, heteroaryl ketones, ketoesters, and unsaturated ketones. In comparison with Ir-TsDPEN and the related Ru II catalyst, the Rh III catalyst is most efficient in water, affording enantioselectivities of up to 99 % ee at substrate/catalyst (S/C) ratios of 100-1000 even without working under an inert atmosphere. The aqueous phase reduction is shown to be highly pH-dependent; the optimum pH windows for TOF greater than 50 mol mol(-1) h(-1) for Rh- and Ir-TsDPEN are 5.5-10.0 and 6.5-8.5, respectively. Outside the pH window, the reduction becomes slow or stagnant depending on the pH. However, the enantioselectivities erode only under acidic conditions. At a higher S/C ratio, the aqueous ATH by Rh-TsDPEN is shown to be product- as well as byproduct-inhibited; the product inhibition appears to stem at least partly from the reaction being reversible. The aqueous phase reduction is simple, efficient and environmentally benign, thus presenting a viable alternative for asymmetric reduction.     

Catalysis of oxo transfer to prochiral sulfides by oxovanadium(v) compounds that model the active center of haloperoxidases

The catalytic properties of a new class of chiral vanadium compounds--[(S,S,S)-VO(OMe)L1] (5), [(S,S)-VO(OMe)L2] (6), [(S,S)-VO(OMe)L3] (7), and [(R,R,R)-VO(OMe)L4] (8), as well as the system VO(OiPr)(3)/(R,R,R)-H(2)L4 [H(2)L1=(S,S)-bis(2-hydroxypropyl)-(S)-1-phenylethylamine, 1; H(2)L2=(S,S)-bis(2-hydroxypropyl)benzylamine, 2; H(2)L3=(S,S)-bis(2-hydroxypropyl)isopropylamine), 3; (H(2)L4)=(R,R)-bis(2-phenylethanol)-(R)-1-phenylethylamine, 4]--in the asymmetric oxidation of prochiral sulfides by organic hydroperoxides have been investigated. Particular attention has been paid to the factors that guide the discrimination between the two prochiral faces of the sulfides (methyl p-tolyl sulfide and benzyl phenyl sulfide), to steric implications stemming from the oxidant (cumyl hydroperoxide and tert-butyl hydroperoxide), and to the specific complex used. As an example, (S)-methyl p-tolyl sulfoxide was obtained in a 31 % enantiomeric excess by use of cumyl hydroperoxide as oxidant and complex 5 as the catalyst, after 150 min at 0 degrees C and with 100 % conversion of the sulfide. The crystal and molecular structures of 5 and 6 reveal the close relationship between these complexes and the active center of vanadate-dependent haloperoxidases: the vanadium is in a slightly distorted trigonal-bipyramidal environment with the nitrogen and the methoxy group in the axial positions, and the oxo and alkoxide functions of L2 and L3 are the plane. The presence and equilibrium situation of isomers of the catalysts in solution has been investigated by (51)V EXSY and variable-temperature multinuclear NMR spectroscopy. An intermediately formed peroxo (ROO(-)) vanadium complex was detected by (51)V NMR spectroscopy.     

Synthesis, characterization, and biomimetic chemistry of cis-oxosulfidomolybdenum(VI) complexes stabilized by an intramolecular Mo(O)=S...S interaction

The reactions of jade-green Tp*MoIVO(S2PR2) [Tp* = hydrotris(3,5-dimethylpyrazol-1-yl)borate; R = Et, Pri, Ph] with propylene sulfide produce ochre-red Tp*MoVIOS{SP(S)R2}. The complexes have been characterized by microanalysis, mass spectrometry, cyclic voltammetry, spectroscopy (IR, NMR, UV-vis, and X-ray absorption), and X-ray crystallography. The distorted-octahedral isopropyl and phenyl derivatives feature a tridentate fac-Tp* ligand, a terminal oxo ligand, and a unique five-membered Mo(=S){SP(=S)R2 ring moiety formed by a weak, intramolecular, bonding interaction between the Mo=S1 and (uncoordinated) S3=P moieties. The Mo=S1 [2.227(2) A (R = Pri) and 2.200(2) A (R = Ph)] and S1...S3 distances [2.396(3) A (R = Pri) and 2.383(2) A (R = Ph)] are indicative of a pi-bonded Mo=S1 unit and a weak (bond order ca. 1/3) S1...S3 interaction; the solid-state structures are maintained in solution according to S K-edge X-ray absorption data. The complexes react with excess cyanide to form thiocyanate and Tp*MoO(S2PR2), under anaerobic conditions, or Tp*MoO2(S2PR2), under aerobic conditions; the latter models the production of thiocyanate and desulfo molybdenum hydroxylases upon cyanolysis of molybdenum hydroxylases. The complexes react with triphenylphosphine to give Tp*MoO(S2PR2) and SPPh3, with cobaltocene or hydrosulfide ion to produce [Tp*MoVOS(S2PR2)]-, and with ferrocenium salts to yield [Tp*MoVO(S3PR2)]+; in the last two reactions, Mo(V) is produced by direct or induced internal redox reactions, respectively. The presence of the Mo(O)=S...S interaction does not radically lengthen the Mo=S bond in the complexes or preclude them from reactions typical of unperturbed oxosulfidomolybdenum(VI) complexes.     

Design of aluminum trihydroxide and P‐N core‐shell structures and their synergistic effects on halogen‐free flame‐retardant polyethylene composites

In order to improve the performance of inorganic/organic composites, aluminum trihydroxide (ATH) core composites with a styrene‐ethylene‐butadiene‐styrene block copolymer grafted with maleic anhydride (MAH‐g‐SEBS) shell phase, and P‐N flame retardant as a synergistic agent, were prepared through an interface design. The effects of polyethylene glycol (PEG) content on the interfacial interaction, flame retardancy, thermal properties, and mechanical properties of high‐density polyethylene (HDPE)/ATH composites were investigated by small angle X‐ray diffraction, rotational rheometer, limiting oxygen index, thermogravimetric analysis (TGA), and tensile testing. The ATH synergistic effects of P‐N flame‐retardant improved the combustion performance of HDPE/ATH/PEG(3%)/MAH‐g‐SEBS/P‐N (abbreviated as HDPE/MH3/M‐g‐S/P‐N) composite by forming more carbon layer, increased the elongation at break from 21% to 558% compared to HDPE/ATH, and increased the interface thickness from 0.447 to 0.891 nm. SEM results support the compatibility of ATH with HDPE increased and the interfacial effect was enhanced. TGA showed the maximum decomposition temperature of the two stages and the yield of the residue at high temperature increased first and then decreased with the increase of PEG content. Rheological behavior showed the storage modulus, complex viscosity, and the relaxation time initially increased and then decreased with the increase of PEG content indicating PEG, M‐g‐S, and ATH powder gradually formed a partial coating, then a full coating, and finally an over‐coated core‐shell structured model.     

高效液相色谱-飞行时间质谱联用法分析人参及人参皂苷与山楂配伍过程中的水解行为

利用高效液相色谱-飞行时间质谱联用的方法,分别对人参配伍山楂前后人参皂苷的变化进行分析,同时对人参皂苷Re、Rg1、Rb1、Rd与山楂配伍的水解规律进行系统研究,并与单独煎煮液、仿山楂配伍pH值煎煮液的水解产物进行比较,结果发现人参与山楂配伍后人参皂苷Rg1、Rb1含量明显减少,而人参皂苷Re、Rd、Rg2、Rg3、F2、Rh1含量明显增加,其中人参皂苷Re与山楂配伍后水解产物为人参皂苷20(R)-Rg2、20(S)-Rg2,仿山楂配伍pH值水解产物为人参皂苷20(R)-Rg2、20(S)-Rg2、Rg4、Rg6;人参皂苷Rg1与山楂配伍后水解产物为20(S)-Rh1、20(R)-Rh1,仿山楂pH值水解产物为20(S)-Rh1、20(R)-Rh1、Rh4、Rk3;人参皂苷Rb1与山楂配伍后水解产物为Rd、20(S)-Rg3,仿山楂pH值水解产物为F2、20(S)-Rg3;人参皂苷Rd与山楂配伍后水解产物为F2、20(S)-Rg3、20(R)-Rg3,仿山楂pH值水解产物为20(S)-Rg3、20(R)-Rg3。研究表明,不同人参皂苷和山楂配伍后与仿山楂pH值的水解产物并不相同,人参与山楂配伍改变了人参皂苷成分的种类及含量。本研究为临床方剂中人参与山楂配伍后成分的变化提供物质基础数据。     

Impurity profiling of ephedrines in methamphetamine by high-performance liquid chromatography

Separation of the enantiomers and diastereomers of ephedrines was investigated for impurity profiling of methamphetamine. We describe a method for the analysis of (1S,2R)-(+)-ephedrine, (1R,2S)-(-)-ephedrine, (1S,2S)-(+)-pseudoephedrine and racemic methylephedrine in bulk methamphetamine by HPLC using two different columns: a phenyl-beta-cyclodextrin-type column and an ODS-type column. The analytes were detected by UV absorbance measurement at 210 nm. As little as 0.05% of each ephedrine in bulk methamphetamine could be determined. In the impurity profiling of methamphetamine, the identification of ephedrines may provide valuable information about the precursor. This method was confirmed to be sufficiently sensitive to identify trace amounts of (1R,2S)-(-)-ephedrine and (1S,2S)-(+)-pseudoephedrine in bulk methamphetamine synthesized by the Emde method.     

Asymmetric synthesis of (1R,2S,3R)-3-methylcispentacin and (1S,2S,3R)-3-methyltranspentacin by kinetic resolution of tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate

Conjugate addition of lithium dibenzylamide to tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate occurs with high levels of stereocontrol, with preferential addition of lithium dibenzylamide to the face of the cyclic alpha,beta-unsaturated acceptor anti- to the 3-methyl substituent. High levels of enantiorecognition are observed between tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate and an excess of lithium (+/-)-N-benzyl-N-alpha-methylbenzylamide (10 eq.) (E > 140) in their mutual kinetic resolution, while the kinetic resolution of tert-butyl (+/-)-3-methylcyclopentene-1-carboxylate with lithium (S)-N-benzyl-N-alpha-methylbenzylamide proceeds to give, at 51% conversion, tert-butyl (1R,2S,3R,alphaS)-3-methyl-2-N-benzyl-N-alpha-methylbenzylaminocyclopentane-1-carboxylate consistent with E > 130, and in 39% yield and 99 +/- 0.5% de after purification. Subsequent deprotection by hydrogenolysis and ester hydrolysis gives (1R,2S,3R)-3-methylcispentacin in > 98% de and 98 +/- 1% ee. Selective epimerisation of tert-butyl (1R,2S,3R,alphaS)-3-methyl-2-N-benzyl-N-alpha-methylbenzylaminocyclopentane-1-carboxylate by treatment with KO'Bu in 'BuOH gives tert-butyl (1S,2S,3R,alphaS)-3-methyl-2-N-benzyl-N-alpha-methylbenzylaminocyclopentane-1-carboxylate in quantitative yield and in > 98% de, with subsequent deprotection by hydrogenolysis and ester hydrolysis giving (1S,2S,3R)-3-methyltranspentacin hydrochloride in > 98% de and 97 +/- 1% ee.     

A convenient synthesis of chiral succinic acid-d2 by catalytic asymmetric reduction using a ruthenium BINAP catalyst

The synthesis of (2R,3R) and (2S,3S) dideuteriosuccinic acid in 63 ± 10% enantiomeric excess by reduction of the half acid ester of ethyl fumarate from (R) and (S) BINAP ruthenium (II) diacetate complex, respectively, is reported. (2R,3R) and (2S,3S)-Dideuteriosuccinic acid has also been prepared from (R)-BINAP ruthenium (II) dicarboxylate complex directly in similar optical purity by reversing the sequence of introduction of the isotopic label.     

Preparation of optically active (2RS,3SR)-2-amino-3-hydroxy-3-phenylpropanoic acid (threo-beta-phenylserine) via optical resolutions by replacing and preferential crystallization

To obtain optically active threo-2-amino-3-hydroxy-3-phenylpropanoic acid (1) via optical resolutions by replacing and preferential crystallization, the racemic structure of (2RS,3SR)-1 hydrochloride [(2RS,3SR)-1.HCl] was examined based on the melting point, solubility, and infrared spectrum. (2RS,3SR)-1.HCl was indicated to exist as a conglomerate at room temperature, although it forms a racemic compound at the melting point. When, in optical resolution by replacing crystallization, L-phenylalanine methyl ester hydrochloride (L-2) was used as the optically active co-solute, (2R,3S)-1.HCl was preferentially crystallized from the supersaturated racemic solution; the use of D-2 as the co-solute afforded (2S,3R)-1.HCl with an optical purity of 95%. In addition, optical resolution by preferential crystallization was successfully achieved to give successively (2R,3S)- and (2S,3R)-1.HCl with optical purities of 90-92%. The (2R,3S)- and (2S,3R)-1.HCl purified by recrystallization from 1-propanol were treated with triethylamine in methanol to give optically pure (2R,3S)- and (2S,3R)-1.     

水相不对称转移氢化*

手性醇和胺是重要的精细化学品,不对称转移氢化是获得这类手性化合物有效、实用的途径之一。在众多的催化剂中,Noyori等发展的手性二胺与过渡金属钌TsDPEN-Ru（TsDPEN = 1,2-二苯基乙二胺）络合物是最有效的催化剂。近年来,随着化学家对绿色化学的日益重视,水作为绿色溶剂被广泛地用作为不对称催化转移氢化的反应介质,具有很高的反应活性、对映选择性和化学选择性。本文综述近年来应用未经修饰和修饰的手性二胺配体与过渡金属钌[(cymene)RuCl₂]₂、铑[(Cp*)RhCl₂]₂和铱[(Cp*)IrCl_2]2的络合物催化的水相中酮、亚胺和活化烯烃的不对称转移氢化的研究进展。     

Synthesis of enantiopure (alphaS,betaS)- or (alphaR,betaS)-beta-amino alcohols by complete regioselective opening of aminoepoxides by organolithium reagents LiAlH4 or LiAlD4

The reaction of chiral (2R,1'S)- or (2S,1'S)-2-(1-aminoalkyl)epoxides, 1 or 2 with a variety of organolithium compounds to obtain the corresponding (alphaS,betaS)- or (alphaR,betaS)- beta-amino alcohols in enantiopure form is reported. In both cases, the opening of the oxirane ring at C-3 proceeded with total regioselectivity. Moreover, the ring opening of aminoepoxides 1 or 2 by hydride (utilizing LiAlH4) to obtain the corresponding (2S,3S)- or (2R,3S)-3-aminoalkan-2-ols is also described. The reaction of 1 or 2 with LiAlD4 in place of LiAlH4 gave the corresponding (2S,3S)- or (2R,3S)-3-amino-1-deuterioalkan-2-ols.     

A new method for the analysis of styrene mercapturic acids by liquid chromatography/electrospray tandem mass spectrometry

A new method based on liquid chromatography/tandem mass spectrometry has been developed for the direct determination of specific urinary mercapturic acids arising from the conjugation of (R)-and (S)-enantiomers of styrene 7,8-oxide with glutathione (GSH), i.e. (R,R)- and (S,R)-N-acetyl-S-(1-phenyl-2-hydroxyethyl)cysteine (R,R-M1 and S,R-M1) and (R,R)- and (S,R)-N-acetyl-S-(2-phenyl-2-hydroxyethyl)-cysteine (R,R-M2 and S,R-M2). The four diastereoisomers were separated on a C18-DB (7.5 cm, 3 microm) column using variable proportions of 20 mM aqueous ammonium formate buffer and methanol at a flow-rate of 0.5 mL/min. The analytes were ionized by electrospray, in negative-ion mode. Operating in selected-reaction monitoring mode, linearity of the MS response versus analyte concentration was established over 4 orders of magnitude, the detection limits being 0.7-1.0 microg/L for all the mercapturates. Precision of the method determined at 50 microg/L (n = 12), expressed as relative standard deviation, was respectively 3.1, 4.8 and 6.9% within the run, intra-day and inter-day. The corresponding figures at 1.0 mg/L (n = 12) were respectively 2.0, 3.6 and 5.5%. The method was applied to the quantitative analysis of conjugated metabolites in urine samples from workers occupationally exposed to styrene. The diastereoisomers R,R-M1 and S,R-M2 accounted respectively for 50 and 40% of total mercapturates, whereas the proportion of R,R-M2 was 7% and only minor amounts of S,R-M1 were detectable. Styrene mercapturates represented a minor fraction of total styrene metabolites, less than 1% on average. The ratio mercapturates/main metabolites (mandelic + phenylglyoxylic acid) showed a bimodal distribution, the medians of the two subgroups being 0.2 and 1%, respectively. Such subgroups are probably characterized by the genetic polymorphisms of the drug-metabolizing enzymes to be identified.     

手性双二茂铁基配体的合成、表征及固体CD光谱

以甲酰基二茂铁(1)和手性1,2-二苯基乙二胺[(1R, 2R)-1,2-二苯基乙二胺(2R), (1S,2S)-1,2-二苯基乙二胺(2S)]为原料, 经缩合、还原和N-烷基化反应, 制备了一对新型手性四齿双二茂铁基配体[N,N’-二(二茂铁基甲基)-N,N’-二(2-羟基丙基)-(1R,2R)-1,2-二苯基乙二胺(5R)和N,N’-二(二茂铁基甲基)-N,N’-二(2-羟基丙基)-(1S,2S)-1,2-二苯基乙二胺(5S)]. 用元素分析、红外(IR)、质子核磁共振(1H NMR)、紫外-可见(UV-Vis)、固体圆二色(CD)光谱等对手性产物(3R-5S)进行了表征. 固体CD光谱研究表明, 配体5R(或5S)的手性特征和4R(或4S)相似而与3R(或3S)却有一定差别.     

Stereoselective synthesis of optically active disilanes and selective functionalization by the cleavage of silicon-naphthyl bonds with bromine

Optically active disilanes with one chiral silicon center, (R)-1,2-dimethyl-1-(naphth-1-yl)-1,2,2-triphenyldisilane and (R)-1,2,2-trimethyl-2-(4-methoxynaphth-1-yl)-1-(naphth-1-yl)-1-phenyldisilane, were obtained by the reaction of (S)-methyl(naphth-1-yl)phenylchlorosilane (> 99% ee) with methyldiphenylsilyllithium or by the reaction of methyldiphenylchlorosilane with optically active (S)-methyl(naphth-1-yl)phenylsilyllithium and by the reaction of (S)-methyl(naphth-1-yl)phenylchlorosilane (> 99% ee) with dimethyl(4-methoxynaphth-1-yl)silyllithium. Under the optimized conditions, the reactions proceeded with almost complete inversion for the cholorosilanes and retention for the silyl anions. Optically active disilanes with two chiral centers, (1R,2R)-1,2-dimethyl-1,2-di(naphth-1-yl)-1,2-diphenyldisilane and (1S,2S)-1,2-di(4-methoxynaphth-1-yl)-1,2-dimethyl-1,2-diphenyldisilane, were obtained in high optical purity by the reactions of corresponding optically active halogenosilanes (Cl or F) with optically active silyllithiums. The silicon-silicon bond and the silicon-naphthyl bond of (R)-1,1,2-trimethyl-1,2-di(naphth-1-yl)-2-phenyldisilane and (1R,2R)-1,2-dimethyl-1,2-di(naphth-1-yl)-1,2-diphenyldisilane were cleaved without selectivity on bromination. The silicon-(4-methoxynaphth-1-yl) bond of (R)-1,2,2-trimethyl-2-(4-methoxynaphth-1-yl)-1-(naphth-1-yl)-1-phenyldisilane was regiospecifically cleaved, followed by the stereoselective cleavage of the remaining chiral silicon-naphthyl bond (94% inversion). Although the silicon-(4-methoxynaphth-1-yl) bonds of (1S,2S)-1,2-di(4-methoxynaphth-1-yl)-1,2-dimethyl-1,2-diphenyldisilane (> 99% ee) were regioselectively cleaved without silicon-silicon bond scission, remarkable racemization could not be avoided during the one-pot reaction.