Spatially confined redox chemistry in periodic mesoporous hydridosilica-nanosilver grown in reducing nanopores

Periodic mesoporous hydridosilica, PMHS, is shown for the first time to function as both a host and a mild reducing agent toward noble metal ions. In this archetypical study, PMHS microspheres react with aqueous Ag(I) solutions to form Ag(0) nanoparticles housed in different pore locations of the mesostructure. The dominant reductive nucleation and growth process involves SiH groups located within the pore walls and yields molecular scale Ag(0) nanoclusters trapped and stabilized in the pore walls of the PMHS microspheres that emit orange-red photoluminescence. Lesser processes initiated with pore surface SiH groups produce some larger spherical and worm-shaped Ag(0) nanoparticles within the pore voids and on the outer surfaces of the PMHS microspheres. The intrinsic reducing power demonstrated in this work for the pore walls of PMHS speaks well for a new genre of chemistry that benefits from the mesoscopic confinement of Si-H groups.     

Functionalization of surface‐grafted polymethylhydrosiloxane thin films with alkyl side chains

Thin films of crosslinked polymethylhydrosiloxane (PMHS) have been grafted on silica using the sol–gel process allowing further functionalization by effective quantitative hydrosilylation of SiH groups by olefins within the network. Postfunctionalization gives the polysiloxane network with n‐alkyl side chains. The PMHS coating was prepared by room temperature polycondensation of a mixture of methyldiethoxysilane HSiMe(OEt)₂ monomer and triethoxysilane HSi(OEt)₃ (TH) as crosslinker. The surface‐attached films are chemically stable and covalently bonded to the silica surface. Subsequently, films were functionalized without delamination. We showed by FTIR spectroscopy how the crosslinking ratio and the molecular size of the alkenes precursors influence the extent of the hydrosilylation reaction of SiH groups in the PMHS network. We have determined that quasi‐full olefin addition catalyzed by a platinum complex occurred within soft networks of less than 5% TH with 1‐alkenes CH₂?CH(CH₂)_n‐2CH₃ of various alkyl chain lengths (n = 5, 11, 17). Powders of PMHS gel were also modified with 1‐alkenes by hydrosilylation. The SiH groups within the soft gel (5% crosslinked) were fully functionalized as shown by ²⁹Si and ¹H solid‐state NMR. The structure of functionalized polysiloxane with n‐octadecyl and n‐dodecyl side chains was studied by FTIR, wide angle X‐ray diffraction, and DSC showing crystallization of the long n‐alkyl chains in the network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3546–3562, 2008     

FT-IR-ATR observation of SiOH and SiH in the oxide layer on an Si wafer

FT-IR-ATR (Fourier transform infrared attenuated total reflectance) technique was used to measure the SiOH and SiH contents in the thermal oxide films grown on Si wafers. It was found that the SiOH groups in the bulk could be eliminated by low temperature annealing, whereas SiOH at the Si/SiO₂ interface could only be removed by high temperature annealing. It was also found that gamma ray irradiation generated SiOH and SiH in the thin oxide film.     

Polybutylene terephthalate reactive blending with polymethylhydrosiloxane by ruthenium‐catalyzed carbonyl hydrosilylation reaction

Carbonyl hydrosilylation reaction was developed to prepare reactive blending between PBT and polymethylhydrosiloxane (PMHS). It focused on the addition reaction of Si–H groups from PMHS onto carbonyl groups from PBT catalyzed by triruthenium dodecacarbonyl (Ru₃(CO)₁₂). An approach on PBT model compounds was carried out and investigated by NMR spectroscopy to evidence the potentiality and efficiency of carbonyl hydrosilylation reaction. At temperatures up to 100 °C, the hydrosilylation reaction can reach 33 mol% conversion in a few hours. Side reactions were also highlighted. Such side reactions can reach more than 23 mol% of the final products when temperature increases to 180 °C. Then hydrosilylation reaction was extended to PBT modification with a molar ratio of ester group/SiH = 3.5 and viscosity ratio polysiloxane/PBT = 4.0 × 10^?5. The reaction was carried out in an internal mixer at 220 °C and followed through the evolution of the torque of the reactional medium. Samples for different processing times were investigated by SEM and rheology. From these analyses, the dispersion of PMHS was promoted with diameters of few micrometers. The elastic behavior of final material was characteristic of solid or gel‐like structures, suggesting a network structure formation consistent with the gel fraction increase from 0 to 0.55. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1855–1868     

HPLC-separation of enantiomers using quinine,covalently bonded to silica as stationary phase

Summary Stationary phases for chiral separations have been synthesized by chemical modification of porous small particle silica using new procedures of fixation of the chiral moiety. So called pre-polymers of the methylpolysiloxane polysiloxane type are immobilized on silica surfaces by different procedures. These pre-polymers are substituted by chiral groups. Their synthesis is done externally i.e. not in-situ on the support surface. The immobilization on the silica surface is achieved by crosslinking and/or by chemical bonding. Anchor groups within the pre-polymer (e.g. SiH) as well as on the silica surface (SiOH) give rise to the chemical bonding therewith. Chiral phases with quinine as the chiral moiety were obtained which show high separation efficiency as well as chemical stability, in addition to the enantiomeric selectivity required for the separation of certain types of aliphatic and aromatic alcohols. Presented at the 16th International Symposium on Chromatography, Paris, September 1986     

Catalytic reductive alkylation of secondary amine with aldehyde and silane by an iridium compound

[reaction: see text] An efficient methodology for the reductive alkylation of secondary amine with aldehyde and Et(3)SiH using an iridium complex as a catalyst has been developed. For example, treatment of dibutylamine with butyraldehyde and Et(3)SiH (a 1:1:1 molar amount of amine, aldehyde, and silane) in 1,4-dioxane at 75 degrees C under the influence of a catalytic amount of [IrCl(cod)](2) gave tributylamine in quantitative yield. In this reaction, no reduction of aldehyde took place. It was found that IrCl(3), which is a starting material for preparation of iridium complexes such as [IrCl(cod)](2), acts as an efficient catalyst for the present reductive alkylation of amine. In addition, a cheaper, easy-to-handle, and environmentally friendly reducing reagent such as polymethylhydrosiloxane (PMHS) in place of Et(3)SiH was also useful. Thus, a variety of secondary amines could be alkylated by allowing them to react with aldehydes and PMHS in the presence of an iridium catalyst to afford the corresponding tertiary amines in good to excellent yields. From the deuterium label experiments, it was revealed that silane and water, generated during the formation of enamine by the reaction of amine and aldehyde, seem to behave as a hydrogen source. The catalytic cycle was discussed.     

Influence of interfaces on the rates of crosslinking in poly(dimethyl siloxane) coatings

We have determined with infrared spectroscopic ellipsometry how the nature of the interface between a thin poly(dimethyl siloxane) (PDMS) coating and its substrate affects the rate of PDMS crosslinking reactions. Reactions between vinyl (? CH?CH₂) end groups on PDMS and silyl (SiH) groups in a crosslinker (hydrosilylation) and between SiH groups and silanol (SiOH) groups, during the so‐called postcure crosslinking stage, have been probed in situ. The overall consumption of SiH follows first‐order reaction kinetics. The first‐order reaction coefficient (k₁) for the hydrosilylation crosslinking reaction is the same for coatings on three different substrates: native oxide on silicon (SiO₂/Si), polystyrene (PS), and poly(ethylene terephthalate). For the slower postcure reactions, however, the rate of SiH consumption depends on the substrate. In 2.5‐μm PDMS coatings on PS, k₁ is about seven times greater than k₁ in the same coating on SiO₂/Si. In PDMS coatings on a PDMS substrate, when the effect of the interface is thus minimal, k₁ is 16 times higher than on SiO₂/Si. The dependence of k₁ on the type of interface is probably the result of the interfacial segregation and complexation of the Pt catalyst for the postcure reactions. We propose that polar surfaces more strongly attract Pt and form complexes that inhibit the postcure reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1421–1431, 2004     

Specific properties of in situ ruthenium‐catalyzed polyamide 12/polydimethylsiloxane compatibilized blend

The main objective of this work focused on the chemical modification of polyamide 12 (PA12) properties through the reaction with a hydride‐terminated polydimethylsiloxane (PDMS‐SiH). The investigated PA12/PDMS‐SiH blend was compatibilized by ruthenium derivative catalyzed hydrosilylation reaction in molten state. This original route enhanced interfacial adhesion and avoid PDMS‐SiH leaching phenomenon between the two immiscible phases. More specifically, the size of PDMS‐SiH domains in the blend decreased from around 4 μm to 800 nm and from 30 to 1 μm after compatibilization with 10 and 20 wt % PDMS‐SiH, respectively. For the best compatibilized PA12/PDMS‐SiH blend, the introduction of PDMS lowered the surface free energy and the PA12‐based blend turned from hydrophilic to hydrophobic behavior, as evidenced by the water contact angle measurements. Gas permeability and CO₂/H₂ and CO₂/He gas selectivity were also improved with the increase in PDMS content. Besides, the mechanical properties were enhanced with 13% increase in Young's modulus after in situ compatibilization with 15 wt % PDMS‐SiH. Thermal stability was also improved after compatibilization as the initial degradation temperature of reactive blends obviously increased compared with nonreactive ones. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 978–988     

Surface chemistry of aerosolized silicon nanoparticles: evolution and desorption of hydrogen from 6-nm diameter particles

The surface chemistry of pristine, 6-nm silicon nanoparticles has been investigated. The particles were produced in an RF plasma and studied using a tandem differential mobility analysis apparatus, Fourier transform infrared spectroscopy (FTIR), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and transmission electron microscopy. Particles were extracted from the plasma, which operates at approximately 20 Torr, into an atmospheric pressure aerosol flow tube, and then through a variable-temperature furnace that could be adjusted between room temperature and 1200 degrees C. DMA measurements show that freshly generated silicon particles shrink with heating, with particle diameters decreasing by approximately 0.25 nm between 350 and 400 degrees C. FTIR results indicate that freshly generated particles are primarily covered with SiH2 groups and smaller amounts of SiH and SiH3. Spectra recorded as a function of heating temperature indicate that the amount of surface hydrogen, as measured by the intensity of modes associated with SiH, SiH2, and SiH3, decreases with heating. ToF-SIMS measurements also suggest that hydrogen desorbs from the particles surfaces over the same temperature range that the particles shrink.     

Reaction of organosilicon hydrides with solid surfaces: an example of surface-catalyzed self-assembly

The solution-phase reactions of octadecylsilane (C(18)H(37)SiH(3)) with 10 high surface area metal oxides (groups II-VIII) were investigated. C(18)H(37)SiH(3) reacted with most metal oxides at room temperature and produced supported monolayers (self-assembled monolayers, SAMs) with a high grafting density of C(18), approximately 4.5-5 groups/nm(2). According to the FTIR and (29)Si NMR spectra, molecules in the SAMs demonstrated "horizontal" cross-linking (Si-O-Si and Si-OH.HO-Si bonds) and little or no "vertical" bonds with the metal oxide forming an amorphous, yet ordered film. Also, approximately 3 mol of H(2) was formed per each mole of grafted C(18), indicating complete hydrolysis of C(18)H(37)SiH(3) during the reaction. On the basis of the activity of different metal oxides, we concluded that the hydrolysis of C(18)H(37)SiH(3), the key step in the reaction mechanism, is catalyzed by water adsorbed on acidic and basic centers (Lewis and Br?nsted) of the surface of metal oxide. Metal oxides and solids with weak acidic and basic properties, like silica, carbon, and organic polymers, do not react with C(18)H(37)SiH(3). Increasing the temperature of the reaction or doping neutral surfaces with acids or bases greatly increases their activity in the reaction with RSiH(3).     

Efficient carbonyl hydrosilylation reaction: Toward EVA copolymer crosslinking

In this article, the hydrosilylation reaction of carbonyl groups of acetate derivatives and SiH groups of hydride‐terminated polydimethylsiloxane at high temperature (100–130 °C) are described. Triruthenium dodecacarbonyl, Ru₃(CO)₁₂, was used as effective catalyst for hydrosilylation reaction. The hydrosilylation reactions with octyl acetate and 4‐heptyl acetate were investigated by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si). This work provides evidence of the addition reaction of SiH groups onto carbonyl groups. The influence of the nature of the acetate structure on the reaction kinetics was shown and the slight contribution of side reactions at high temperature highlighted. Hydrosilylation reaction was extent to the crosslinking of ethylene‐vinyl acetate (EVA) copolymer in the same range of temperature. The formation of EVA chemical network was demonstrated by HR‐MAS NMR spectroscopy and by measuring the gel fraction of EVA chains in hot toluene. From Flory theory, the crosslinking density of elastic strand was calculated to be 80 mol m^?3 in agreement with the measurements from swelling ratio (VA/SiH molar ratio: 11.8). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

In situ synthesis of polysulfides covalently bonded to silica

Silanol groups, triple bond SiOH, on the surface of silica were esterified with unsaturated alcohols and long-chain alcohols bearing thiol groups. The modified silicas obtained were used as substrates for a vulcanization-analogous reaction with sulfur catalyzed by zinc dimethyldithiocarbamate. Surface-esterified thiols could be smoothly converted to bridged polysulfides bonded to the silica surface, whereas the use of surface-esterified unsaturated alcohols led to removal of the surface-esterified alcohol from the silica surface. The materials were characterized by solid-state NMR and thermal and microanalytical analysis. The linking of surface-esterified alkenols and thiols by sulfide bridges was investigated by a numerical model for a flat surface. This showed that for a typical density of 3-4 micromol/m(2) surface groups, a statistical maximum of 70-75% of groups could be linked by S(n) bridges (n=2-4).     

Theoretical Study of Ethanethiol Adsorption on HZSM-5 Zeolite

The density functional theory and the cluster model methods have been employed to investigate the interactions between ethanethiol and HZSM-5 zeolites. Molecular complexes formed by the adsorption of ethanethiol on silanol H3SiOH with two coordination forms, model Bronsted acid sites of zeolite cluster H3Si(OH)Al(OH)2SiH3 interaction with ethanethiol, aluminum species adsorbed ethanethiol have been comparatively studied. Full optimization and frequency analysis of all cluster models have been carried out using B3LYP hybrid method at 3-21G basis level for hydrogen atoms and 6-31G(d) basis set level for silicon, aluminum, oxygen, carbon, and sulfur atoms. The structures and energy changes of different coordination forms of H3Si(OH)Al(OH)2SiH3-ethanethiol, silanol-ethanethiol and Al(OH)3-ethanethiol have been studied. The calculated results showed the nature of interactions was van der Waals force as exhibited by not much change in geometric structures and properties. The preference order of ethanethiol adsorbed on HZSM-5 zeolite may be residual aluminum species, bridging hydroxyl groups and silanol OH groups from the adsorption heat. The adsorbed models of protonized ethanethiol on bridging hydroxyl OH groups and linear hydrogen bonded ethanethiol on bridging OH groups suggested in literature might not exist as revealed by this theoretical calculation. Possible adsorption models were obtained for the first time.     

正离子光固化聚硅氧烷的合成及其环氧树脂复合固化膜的性能

以含氢聚硅氧烷(PMHS)分别与甲基丙烯酸六氟丁酯(HFMA)和烯丙基缩水甘油醚(AGE),经氯铂酸催化硅氢加成反应将甲基丙烯酸六氟丁酯和烯丙基缩水甘油醚引入聚硅氧烷的侧链,合成了3种含氟量不同的含氟代烃侧基/环氧侧基聚硅氧烷(EFPS),用FTIR、1H-NMR和13C-NMR进行了结构表征,将这类聚硅氧烷与环氧树脂...     

Surface activity and emulsification properties of hydrophobically modified dextrans

Neutral polymeric surfactants were synthesized by covalent attachment of hydrophobic groups (aromatic rings) onto a polysaccharide backbone (dextran). By changing the conditions of the modification reaction, the number of grafted hydrophobic groups per 100 glucopyranose units (substitution ratio) was varied between 7 and 22. In aqueous solution, these polymers behaved like classical associative polymers as demonstrated by viscometric measurements. The associative behavior was more pronounced when the substitution ratio increased. The surface-active properties of the modified dextrans were evidenced by surface tension (air/water) and interfacial tension (dodecane/water) measurements. In each case the surface or interfacial tension leveled down above a critical polymer concentration, which was attributed to the formation of a dense polymer layer at the liquid-air or liquid-liquid interface. Dodecane-in-water emulsions were prepared using the polymeric surfactants as stabilizers, with oil volume fractions ranging between 5 and 20%. The oil droplet size (measured by dynamic light scattering) was correlated to the amount of polymer in the aqueous phase and to the volume of emulsified oil. The thickness of the adsorbed polymer layer was estimated thanks to zeta potential measurements coupled with size measurements. This thickness increased with the amount of polymer available for adsorption at the interface. The dextran-based surfactants were also applied to emulsion polymerization of styrene and stable polystyrene particles were obtained with a permanent adsorbed dextran layer at their surface. The comparison with the use of an unmodified dextran indicated that the polymeric surfactants were densely packed at the surface of the particles. The colloidal stability of the suspensions of polystyrene particles as well as their protection against protein adsorption (bovine serum albumin, BSA, used as a test protein) were also examined.     

Untersuchungen zur Wechselwirkung von Quarz mit H2 unter Einwirkung mechanischer Energie. III temperaturprogrammierte Desorption

Investigation of the Interaction of Quartz with H₂ under Supply of Mechanical Energy. III. Temperature-programmed Desorption The thermodesorption of H₂ from quartz, which has been mechanically stressed under H₂, show one relatively broad main peak with a maximum between 760 and 580 K. Increasing degree of disorder of the solid shifts the maximum towards lower temperatures. The H₂ thermodesorption may be explained as an activated diffusion process in the partially crystalline quartz. It is considered in connexion with structural and other changes of the quartz, e. g. with the concentration decreases of ≡Si· and =SiH/=SiOH radicals as well as ≡SiH and ≡SiOH groups.     

Surface processes during sorption of aromatic molecules on medium pore zeolites

The elementary steps of sorption and transport of benzene, toluene, and o- and p-xylene from the gas phase to hydroxy groups of zeolite H/ZSM-5 on the outer surface (SiOH groups) and in the pores (SiOHAl groups) were studied using pressure modulations followed by fast time-resolved IR spectroscopy. Sorption on these acid sites occurs via a common physisorbed state on the outer surface. The equilibration of the molecules in this state is fast compared to the sorption rates on SiOH and SiOHAl groups. The relative rates of equilibration of functional groups with the aromatic molecules suggest that the aromatic molecules move freely on the surface of the outer surface before reversibly binding to OH groups, entering the micropores or desorbing. Molecules able to enter into the pores (benzene, toluene, p-xylene) adsorb faster on SiOHAl groups than on SiOH groups. If the access of the molecules into the pores is sterically constrained (o-xylene), the rate of adsorption on the remaining accessible SiOH groups is strongly enhanced.     

Influence of substrate hydrophobicity on the adsorption of an amphiphilic diblock copolymer

The adsorption of poly(tert-butylmethacrylate)-block-poly(2-(dimethylamino-ethyl) methacrylate) (PtBUMA-b-PDMAEMA) was studied by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) analysis performed on dried samples. The copolymer was dissolved in toluene at concentrations below (0.01 wt%) and above (0.05 and 1 wt%) the CMC; silicon (SiOH) and CH(3)-grafted silicon (SiCH(3)) were used as substrates. Whatever the concentration and the substrate, a layer of individual copolymer molecules, 1.5-3 nm thick, formed rapidly. The adsorbed amount was slightly higher and the resistance to AFM tip scraping was stronger on SiOH than on SiCH(3). This is attributed to hydrogen bonding between the PDMAEMA block and the OH groups of the silicon surface, leading to polarization of the adsorbed layer. Above the CMC, on SiOH, randomly scattered dot-like features (about 5 nm high) observed by AFM were attributed to individual micelles, which were not displaced by drying. On SiCH(3), the particles found on the top of the adsorbed layer were micelle aggregates, about 50 nm thick, the lateral size of which was strongly influenced by the rate of drying. This further difference between SiCH(3) and SiOH is tentatively attributed to the exposure of PDMAEMA by the adsorbed layer formed on SiCH(3), while only PtBUMA would be exposed by the layer adsorbed on SiOH. The red blood cell shape and the size of the micelles observed in single layers indicate that the PtBUMA corona was not made compact as a result of drying.     

Computational study of the reactions of SiH3X (X=H, Cl, Br, I) with HCN

Ab initio calculations were carried out for the reactions of silane and halosilanes (SiH3X, X=H, Cl, Br, I) with HCN. Geometries of the reactants, transition states, intermediates and products were optimized at HF, MP2, and B3LYP levels of theory using the 6-31G(d) and 6-31G(d,p) basis sets. Energies were also obtained using G3MP2 and G3B3 levels of theory. Intrinsic reaction coordinate (IRC) calculations were performed to characterize the transition states on the potential energy surface. It was found that HCN can react with silane and halosilanes via three different mechanisms. One involves HX elimination by a one-step pathway producing SiH3CN. The second mechanism consists of H2 elimination, producing SiH2XCN via a one-step pathway or three multiple-step pathways. The third mechanism involves dissociation of SiH3X to various products, which can then react with HCN. Activation energies, enthalpies, and free energies of activation along with the thermodynamic properties (DeltaE, DeltaH, and DeltaG) of each reaction pathway were calculated. The reaction of SiH3X with HCN produce different products depending on substituent X. We have found that the standard 6-31G(d) bromine basis set gave results which were in better agreement with the G3MP2 results than for the Binning-Curtiss basis set. Computed heats of formation (DeltaHf) for SiH3CN, SiH3NC, SiH2ClCN, SiH2BrCN, SiH2ICN, SiHCl, SiHBr, and SiHI were found to be 133.5, 150.8, -34.4, 23.6, 102.4, 48.7, 127.1, and 179.8 kJ mol-1, respectively. From enthalpies calculated at G3MP2, we predict that the DeltaHf for SiH2 to be 262.8 kJ mol-1 compared to the experimental value of 273.8+/-4.2 kJ mol-1.     

Supramolecular silanol chemistry in the gas phase. Topological (AIM) and population (NBO) analyses of hydrogen-bonded complexes between H3SiOH and selected O- and N-acceptor molecules

Hydrogen bonding of the type SiO-H...A (A = O, N) has been studied in the gas phase for simple H3SiOH.acceptor complexes with the acceptor molecules being O(H)SiH3, OH2, O(H)CH3, O(CH3)2, O(CH3)SiH3, O(SiH3)2, NH3, N(CH3)H2, N(CH3)2H, N(CH3)3, N(CH3)2C6H5, and NC5H5, respectively, at the B3LYP/6-311+(2d,p) level of theory, using Bader's atoms in molecules (AIM) and Weinhold's natural bond orbital (NBO) methodology. For all complexes (except H3SiOH.N(CH3)2C6H5) the complex energy Eadd. is a good estimate for the hydrogen bond energy EHB, which is generally higher in N-acceptor complexes (-5.52 to -7.17 kcal mol-1) than in O-acceptor complexes (-2.09 to -5.06 kcal mol-1). In case of H3SiOH.N(CH3)2C6H5, EHB and Eadd. differ by the energy associated with the loss of n(N)-->pi conjugation in N(CH3)2C6H5 upon complex formation. EHB shows no correlation with O...A distances and the red shifts Deltanu(OH) of the OH-stretching vibrations when different acceptors are compared, although both parameters are commonly used to estimate the strength of the hydrogen bond from spectroscopic and diffraction data. A good linear correlation of the hydrogen bond energy EHB has been established with parameters derived from the AIM and NBO analyses, namely, the electron densities rho(HA) and rho(OH) at the H...A and O-H bond critical points (BCPs) and the NLMO bond orders BONLMO(HA) of the H...A bonds of the H3SiOH.acceptor complexes as well as the change of natural charges DeltaqNPA(O) at the O-donor atom upon H3SiOH.acceptor complex formation. Hydrogen bonding of the type SiO-H...A (A = O, N) has been also studied in the related cyclic multiple H3SiOH.acceptor complexes (H3SiOH)3, (H3SiOH)2.NC5H5, and (H3SiOH)4, respectively, at the same level of theory. Cooperative hydrogen bonding is evident for all cyclic multiple H3SiOH.acceptor complexes, whereby the strongest concomitant strengthening of the hydrogen bonds is observed for (H3SiOH)4 and (H3SiOH)2.NC5H5.