Polyelectrolyte‐grafted carbon nanotubes: Synthesis,reversible phase‐transition behavior,and tribological properties as lubricant additives

A novel polyelectrolyte‐grafted multiwalled carbon nanotubes (MWCNTs‐g‐PILs) which possesses a hard backbone of MWCNTs and a soft shell of brush‐like poly (ionic liquids) (PILs) has been synthesized via the surface atom transfer radical polymerization (ATRP). Chemical structure and the grafted PILs quantities of MWCNTs‐g‐PILs were determined by FTIR, TGA, and XPS. TEM and FE‐SEM observations indicate that the nanotubes were coated with a PILs layer, exhibiting core‐shell nanostructures with the PILs chains as the brush‐like or hairy shell and the MWCNTs as the hard backbone. Furthermore, the effect of counter‐anions on the solubility of MWCNTs‐g‐PILs was investigated. The results indicate that relative solubility of MWCNTs‐g‐PILs in various solvents could be switched by anion exchange. This tunable solubility results in the formation of the cycle of reversible phase‐transition. Tribological property of MWCNTs‐g‐PILs as additives in base lubricant 1‐methyl‐3‐butylimidaaolium hexafluorophosphate (LP104) was evaluated using an Optimol SRV oscillating friction and wear tester, confirming that MWCNTs‐g‐PILs are the excellent antiwear and friction‐reducing additives, which can amend the tribological properties of base lubricant significantly. This is attributed to the good dispersibility and core‐shell structure of MWCNTs‐g‐PILs. These results reported in this work may open primarily toward constructing a bridge among carbon nanotues (CNTs), ILs, and lubricant additives and secondarily to prove that CNTs (modified CNTs) as lubricant additives are promising candidates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7225–7237, 2008     

Structure and Surface Properties of High-density Polyelectrolyte Brushes at the Interface of Aqueous Solution

Zwitterionic and cationic polyelectrolyte brushes were prepared by surface-initiated atom transfer radical polymerization of 2-methacryloyloxy- ethyl phosphorylcholine (MPC) and 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA), respectively. The poly(DMAEMA) brush was treated with methyl iodide to form poly[2-(methacryloyloxy) ethyltrimethylammonium iodide] [poly(METAI)]. The effects of ionic strength on brush structure and surface properties of densely grafted polyelectrolyte brushes were analyzed by contact angle measurements, neutron reflectivity (NR) and macroscopic friction tests. Both polyelectrolyte brushes exhibited hydrophilic properties. The contact angle of the poly(MPC) brush surface against water was ca. 0° in air and the contact angle of the air bubble in water was ca. 170°. The air bubble in water hardly attached to the poly(MPC) brush surface, indicating super hydrophilic characteristics. NR measurements of poly(MPC) and poly(METAI) brushes showed that the grafted polymer chains were extended from the substrate surface in a good solvent such as water. Interestingly, NR study did not reveal the shrinkage of the brush chain in salt solution. The polyelectrolyte brushes immersed in both water and NaCl solution at various concentrations showed a low friction coefficient and low adhesion force.     

Tribological properties of hydrophilic polymer brushes under wet conditions

This article demonstrates a water‐lubrication system using high‐density hydrophilic polymer brushes consisting of 2,3‐dehydroxypropyl methacrylate (DHMA), vinyl alcohol, oligo(ethylene glycol)methyl ether methacrylate, 2‐(methacryloyloxy)ethyltrimethylammonium chloride (MTAC), 3‐sulfopropyl methacrylate potassium salt (SPMK), and 2‐methacryloyloxyethyl phosphorylcholine (MPC) prepared by surface‐initiated controlled radical polymerization. Macroscopic frictional properties of brush surfaces were characterized by sliding a glass ball probe in water using a ball‐on‐plate type tribotester under the load of 0.1–0.49 N at the sliding velocity of 10^?5–10^?1 m s^?1 at 298 K. A poly(DHMA) brush showed a relatively larger friction coefficient in water, whereas the polyelectrolyte brushes, such as poly(SPMK) and poly(MPC), revealed significantly low friction coefficients below 0.02 in water and in humid air conditions. A drastic reduction in the friction coefficient of polyelectrolyte brushes in aqueous solution was observed at around 10^?3–10^?2 m s^?1 owing to the hydrodynamic lubrication effect, however, an increase in salt concentration in the aqueous solution led to the increase in the friction coefficients of poly(MTAC) and poly(SPMK) brushes. The poly(SPMK) brush showed a stable and low friction coefficient in water even after sliding over 450 friction cycles, indicating a good wear resistance of the brush film. © 2010 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 10: 208–216; 2010: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.201000001     

Tribological behavior of the low-concentration boric acid and ZDDP lubricating oil mixtures

Zinc dithiophosphate (ZDDP)-free environmental friendly lubricating oil research studies have gained importance due to the governmental regulations over the last decade. In this study, low concentration boric acid-base oil and ZDDP-base oil mixtures were investigated with a ball on flat reciprocating tribometer to evaluate their tribological performances. The tribological performances of 1, 3, and 5% additive and base oil mixtures were evaluated at boundary lubrication condition in three main contexts including wear rates, surface tribochemistry, and friction. Results showed that there was no significant difference between boric acid and ZDDP friction coefficients. However, boric acid showed poor wear resistance when compared with ZDDP and it cannot be an alternative additive alone to ZDDPs.     

Superlubricity behaviors of Si3N4/DLC Films under PAO oil with nano boron nitride additive lubrication

The tribological properties of Si₃N₄ ball sliding against diamond‐like carbon (DLC) films were investigated using a ball‐on‐disc tribometer under dry friction and oil lubrications, respectively. The influence of nano boron nitride particle as lubricant additive in poly‐α‐olefin (PAO) oil on the tribological properties of Si₃N₄/DLC films was evaluated. The microstructure of DLC films was measured by Raman spectroscopy and X‐ray photoelectron spectroscopy. The experimental results show coefficient of friction (COF) of Si₃N₄/DLC films was as low as 0.035 due to the formation of graphite‐like transfer films under dry friction condition. It also indicates that the tribological properties of Si₃N₄/DLC films were influenced significantly by the viscosity of oil and the content of nano boron nitride particle in PAO oil. COF increases with the viscosity of PAO oil increasing. Si₃N₄/DLC films exhibit the superlubricity behaviors (μ=0.001 and nonmeasurable wear) under PAO 6 oil with 1.0 wt% nano boron nitride particle lubrication, indicating that the improved boundary lubrication behaviors have indeed been responsible for the significantly reduced friction. Nano boron nitride additive is used as solid lubricant‐like nano scale ball bearing to the pointlike contact and a soft phase bond with the weak van der Waals interaction force on the contact surface to improve the lubrication behaviors of Si₃N₄/DLC films. The potential usefulness of nano boron nitride as lubricant additive in PAO oil for Si₃N₄/DLC films has been demonstrated under oil lubrication conditions. The present work will extend the wide application of nano particle additive and introduce a new approach to superlubricity under boundary lubrication in future technological areas. Copyright © 2013 John Wiley & Sons, Ltd.     

Next‐Generation Polymer Shells for Inorganic Nanoparticles are Highly Compact,Ultra‐Dense,and Long‐Lasting Cyclic Brushes

Cyclic poly‐2‐ethyl‐2‐oxazoline (PEOXA) ligands for superparamagnetic Fe₃O₄ nanoparticles (NPs) generate ultra‐dense and highly compact shells, providing enhanced colloidal stability and bio‐inertness in physiological media. When linear brush shells fail in providing colloidal stabilization to NPs, the cyclic ones assure long lasting dispersions. While the thermally induced dehydration of linear PEOXA shells cause irreversible aggregation of the NPs, the collapse and subsequent rehydration of similarly grafted cyclic brushes allow the full recovery of individually dispersed NPs. Although linear ligands are densely grafted onto Fe₃O₄ cores, a small plasma protein such as bovine serum albumin (BSA) still physisorbs within their shells. In contrast, the impenetrable entropic shield provided by cyclic brushes efficiently prevents nonspecific interaction with proteins.     

Next‐Generation Polymer Shells for Inorganic Nanoparticles are Highly Compact,Ultra‐Dense,and Long‐Lasting Cyclic Brushes

Cyclic poly‐2‐ethyl‐2‐oxazoline (PEOXA) ligands for superparamagnetic Fe₃O₄ nanoparticles (NPs) generate ultra‐dense and highly compact shells, providing enhanced colloidal stability and bio‐inertness in physiological media. When linear brush shells fail in providing colloidal stabilization to NPs, the cyclic ones assure long lasting dispersions. While the thermally induced dehydration of linear PEOXA shells cause irreversible aggregation of the NPs, the collapse and subsequent rehydration of similarly grafted cyclic brushes allow the full recovery of individually dispersed NPs. Although linear ligands are densely grafted onto Fe₃O₄ cores, a small plasma protein such as bovine serum albumin (BSA) still physisorbs within their shells. In contrast, the impenetrable entropic shield provided by cyclic brushes efficiently prevents nonspecific interaction with proteins.     

Using Polymers to Impart Lubricity and Biopassivity to Surfaces: Are These Properties Linked?

Polymer brushes have been widely applied for the reduction of both friction and non‐specific protein adsorption. In many (but not all) applications, such as contact lenses or medical devices, this combination of properties is highly desirable. Indeed, for many polymer‐brush systems, lubricity and resistance to biofouling appear to go hand in hand, with modifications of brush architecture, for example, leading to a similar degree of enhancement (or degradation) in both properties. In the case of poly(ethylene glycol) (PEG) brushes, this has been widely demonstrated. There are, however, examples where this behavior breaks down. In systems where linear brushes are covalently crosslinked during surface‐initiated polymerization (SIP), for example, the presence and the chemical nature of links between grafted chains might or might not influence biopassivity of the films, while it always causes an increment in friction. Furthermore, when the grafted‐chain topology is shifted from linear to cyclic, chemically identical brushes show a substantial improvement in lubrication, whereas their protein resistance remains unaltered. Architectural control of polymer brush films can provide another degree of freedom in the design of lubricious and biopassive coatings, leading to new combinations of surface properties and their independent modulation.     

油酸修饰CuS纳米颗粒的原位合成及其摩擦学性能

利用原位合成法室温下直接在基础油中成功制备了油酸修饰CuS 纳米颗粒, 将其长时间静置, 不会发生纳米颗粒的团聚. TEM 研究表明, 该方法制备的纳米颗粒粒径大约为30 nm. 红外光谱结果表明, 由于油酸的羧基与无机CuS纳米颗粒表面发生了化学吸附,使无机纳米颗粒的表面有一层有机修饰层, 从而增强了其油溶性.摩擦磨损试验结果表明,该添加剂在基础油中能起到抗磨减摩的效果.随着添加剂浓度的增大, 摩擦系数和磨斑直径都呈现下降趋势,当添加剂浓度为0.1%(w)时, 摩擦系数和磨斑直径都达到最小值,但是进一步增加添加剂浓度, 摩擦系数与磨斑直径又都开始增大. SEM 研究结果表明, 油酸修饰CuS 纳米颗粒能起到抗磨减摩作用的原因是因为其有利于在摩擦副表面形成牢固的润滑膜.     

Scale‐up synthesis of hyperbranched poly(amidoamine)‐grafted ultrafine silica using dendrimer synthesis methodology in solvent‐free dry‐system

Scale‐up synthesis of hyperbranched poly(amidoamine)‐grafted ultrafine silica was successfully achieved by using dendrimer synthesis methodology in solvent‐free dry‐system. The poly(amidoamine) was allowed to grow from silica surface by repeating two steps: (1) Michael addition of methyl acrylate (MA) to amino group on the surface and (2) amidation of terminal ester group with ethylenediamine (EDA). MA was sprayed onto silica having amino group and the silica agitated at 300 rpm at 50 °C. After the reaction, unreacted MA was removed under vacuum. Then EDA was sprayed and the reaction was conducted at 50 °C with agitation. After the reaction, unreacted EDA was also removed under vacuum at 50 °C and MA was sprayed again. The percentage of poly(amidoamine) grafting onto the surface was determined to be 141% with repeated reaction cycles of eight‐times. However, the value was considerably smaller than that of the theoretical value. This indicates that the propagation of poly(amidoamine) dendron from silica surface was not achieved theoretically and hyperbranched poly(amidoamine) was grafted onto the surface because of steric hindrance of grafted polymer. In addition, the effect of initial amino group content on the growth of poly(amidoamine) from the surface was investigated. It was concluded that the method is suitable for the scale‐up synthesis of hyperbranched poly(amidoamine)‐grafted silica. Copyright © 2002 John Wiley & Sons, Ltd.     

Multiple levels hydrophobic modification of polymeric substrates by UV‐grafting polymerization with TFEMA as monomer

The hydrophobic solid surface modification with fluorine‐containing monomers has received tremendous attention because of its unique structure and excellent property. However, these hydrophobic films normally suffer from two major problems: one is weak interface interaction between fluoropolymers and substrates, and the other is the high cost of fluorine‐containing monomers. Herein, with the aim of feasible industrial application, a facile in situ UV photo‐grafting method is reported, which could ensure the formation of chemical bonds between fluoropolymer‐grafted layer and substrate with a low cost commercial 2,2,2‐trifluoroethyl methacrylate (TFEMA) as monomer. With low‐density polyethylene (LDPE) film as a model substrate, four kinds of poly‐TFEMA‐grafted layer are fabricated on LDPE films with different surface morphologies: polymer brush, polymer network, crosslinked nanoparticles, and a micro‐ and nanoscale hierarchical structure. The experimental results showed that the water contact angles (CAs) of the LDPE films grafted with polymer brush, polymer network, and crosslinked nanoparticles were (103 ± 2)°, (95 ± 2)°, and (122 ± 2)°, respectively, which were much higher than that of LDPE film. The introduction of micro‐ and nanoscale hierarchical structures can dramatically improve the surface roughness, which will further enhance the film hydrophobicity, and the water CA can reach as high as (140 ± 1)°. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1059–1067     

Nanosized Additives to Lubricating Materials

The review deals with the synthesis and use of nanosized additives in friction and wear processes. Various types of nanosized additives are considered, and their performance as friction modifiers is demonstrated. The influence exerted on the antiwear performance of lubricating materials by the size and concentration of the introduced particles differing in the chemical nature is considered. Methods for preparing nanosized additives and stabilizing them in lubricating materials are described.     

Tribological properties of graphene nanosheets as an additive in calcium grease

The addition of graphene nanosheets (GNSs) in lubricating grease could significantly reduce the interfacial friction and improve the load-bearing capacity of the parts. Therefore, it has been considered as having great potential as lubricant additives. In this study, we synthesized GNSs that are prepared by a modified Hummer method, and investigated the effect of GNS with different concentration (0.5%, 1%, 2%, 3%, and 4?wt%) on the tribological properties of the calcium grease. The friction and wear experiments were performed using a four-ball tribometer. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to examine the GNS and the friction mechanisms. Results indicate that the friction reduction ability and anti-wear property of the base grease can be improved with the addition of GNS. It was also found that the friction reduction decreases by 61%, and the wear scar diameter (WSD) decreases by 45%, and the extreme-pressure (EP) properties increased 60% at 3?wt% GNS. It is clear that the GNS in grease easily forms protective deposited films to prevent the rubbing surfaces from coming into direct contact, thereby improving the entire tribological behavior of the grease.     

Preparation and Tribological Behaviors of Lubricants—Oil Based on Modified Microbial Oil with Nano-Schiff Base Copper Complex

A W/O microemulsion reactor was used to prepare four kinds of modified lubricants: (i) modified lubricant 1, modified epoxidized microbial oil + rape oil in volume ratio of 1:1; (ii) modified lubricant 2, modified esterified microbial oil + rape oil in volume ratio of 1:3; (iii) modified lubricant 3, modified epoxidized rape oil; and (iv) modified lubricant 4, modified PAO. The individual modified lubricants were further modified with 0%, 0.5%, 1%, and 2% content of nano-Schiff base copper complex (nano-SBCC). A microtribometer was used to evaluate the friction coefficient between ball/flat point contacts immersed in the modified lubricants and operated in reciprocating and linear sliding mode. A comparison of the values of the friction coefficient with the lubricants further modified with nano-SBCC with those of their individual 0% nano-SBCC counterparts indicated significant decrease: (i) almost 19.18% was obtainable for the modified lubricant 1 with 2% of nano-Schiff base copper complex, (ii) almost 16.5% was obtainable for the modified lubricant 2 with 0.5% of nano-Schiff base copper complex; (iii) almost 7.42% was obtainable for the modified lubricant 3 with 1% of nano-SBCC; and (iv) almost 7.01% was obtainable for the modified lubricant 4 with 0.5% of nano-SBCC. These suggested that the addition of nano-Schiff base copper complex can efficiently decrease the friction coefficient of epoxidized or esterified microbial oil. Analyses of two-dimensional images, average profiles (across the mid-section y = 0 of the reciprocating sliding path), and three-dimensional topographies by confocal white light microscope for the worn surfaces of flats immersed in modified lubricant 1 and modified lubricant 2 suggested better wear-resistance of the modified lubricant 2 than that of the modified lubricant 1. The ability of wear resistance for the modified lubricant became better with the increasing content of nano-Schiff base copper complex from 0% to 2%. The study revealed the modification of epoxidized microbial oil + rape oil (1:1 volume ratio) and esterified microbial oil + rape oil (1:3 volume ratio) with Cu(II) chelate of bis(salicylaldehyde)ethylenediamine, reducing the magnitude of friction and wear because of their respective wear self-repairing ability. Such self-repairing ability furnishes the suitability of epoxidized microbial oil or esterified microbial oil to be effectively modified by nano-Schiff base copper complex and to substitute ordinary base oil as a mixture with rape oil.     

Friction and wear mechanisms of polyamide 66/high density polyethylene blends

Polyamide 66 (PA66)/high density polyethylene (HDPE) blends having miscible structure were produced by compatibilization of HDPE grafted with maleic anhydride (HDPE‐g‐MAH). Mechanical and tribological properties of blends in different compositions were tested. It was found that the polymer blends greatly improved the mechanical properties of PA66 and HDPE. Blending HDPE with PA66 significantly decreased the friction coefficient of PA66; the friction coefficients of blends with different compositions were almost the same and approximately equal to that of pure HDPE; the blends with 80 vol % PA66 exhibited the best wear resistance. The transfer films, counterpart surfaces, and wear debris formed during sliding were investigated by Scanning Electron Microscopy (SEM), and Differential Scanning Calorimetry (DSC) analysis was further carried out on wear debris. These investigations indicated that the thermal control of friction model is applicable to PA66/HDPE blend, that is the friction coefficient of blend is governed by the HDPE component, which possesses a lower softening point relative to the PA66 component in this system. The wear mechanism of PA66/HDPE blend transforms from PA66 to HDPE as the HDPE content increases. PA66, as the component with higher softening point, increases the hardness of blend, enhances the ability of blend to form a transfer film on the counterface, and inhibits the formation of larger belt‐like debris of HDPE, at the same time, the presence of self‐lubricating HDPE in the system decreases the friction coefficient and the frictional heat, all of these factors are favorable for the wear resistance of PA66/HDPE blend. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2514–2523, 2005     

Temperature‐sensitive poly(N‐isopropylacrylamide)‐grafted surfaces modulate blood platelet interactions

Interactions between a temperature‐responsive poly(N‐isopropylacrylamide)‐grafted surface and blood platelets have been analyzed with computerized image analysis. Platelet behavior on this surface is dramatically dependent upon temperature in contrast to that on poly(ethylene glycol) (PEG)‐grafted surfaces or polystyrene. The poly(N‐isopropylacrylamide)‐grafted surface interacts with platelets similarly as the poly(ethylene glycol)‐rafted surface at 18°C. At 37°C, platelets readily adhere onto the poly(N‐isopropylacrylamide)‐grafted surface similarly as to that of polystyrene.     

聚合物纳米微球的合成及摩擦学行为

润滑油添加剂;抗磨性;缓存;聚合物纳米微球的合成及摩擦学行为     

Thermosensitive PEGylated Polypeptides

Summary: We report a thermosensitive polypeptide consisting of hydrophilic poly(ethylene glycol)s and hydrophobic phenyl alanine ethyl esters. It is soluble in most solvents and undergoes a micelle (radius ≈ 10 nm) to nanoparticle (radius ≈ 100 nm) transition in water as the temperature increases. The transition temperature could be controlled to between 30 and 40 °C by varying the number of poly(ethylene glycol) grafts. This system might be promising for advanced drug delivery.

Measurement of the lower critical solution temperatures of PEG‐PP aqueous solutions (1.0 wt.‐%).     

Poly(4‐vinylpyridine) as the host ligand of metal‐containing chromophores for second‐order nonlinear optical active materials

Two formulas of grafted polymers with metal‐containing chromophores, potentially suitable for second‐order nonlinear optics applications, are described. Two chromophores were obtained from a tridentate ligand coordinated to Cu(II) or Pd(II) ions. The organometallic chromophore fragments were grafted to poly(4‐vinylpyridine) by the pyridinic nitrogen of the host polymer. Some qualities displayed by the new metallated polymers are remarkable: (1) a high value of the first hyperpolarizability coefficient of the chromophores, (2) a high content of the grafted chromophore in the polymers (up to 60 wt %), (3) a considerable increase in the glass‐transition temperatures (up to 240 °C), (4) good thermal stability in air (ca. 280 °C), and (5) good optical transparency of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2987–2993, 2002     

Thermoresponsive Polymer Brush Modulation on the Direction of Motion of Phoretically Driven Janus Micromotors

We report a thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) brush functionalized Janus Au–Pt bimetallic micromotor capable of modulating the direction of motion with the change of the ambient temperature. The PNIPAM@Au–Pt micromotor moved along the Au–Pt direction with a speed of 8.5 μm s^?1 in 1.5 % H₂O₂ at 25 °C (below the lower critical solution temperature (LCST) of PNIPAM), whereas it changed the direction of motion (i.e., along the Pt–Au direction) and the speed decreased to 2.3 μm s^?1 at 35 °C (above LCST). Below LCST, PNIPAM brushes grafted on the Au side were hydrophilic and swelled, which permitted the electron transfer and proton diffusion on the Au side, and thus the motion is regarded as a self‐electrophoretic mechanism. However, PNIPAM brushes above LCST became hydrophobic and collapsed, and thus the driving mechanism switched to the self‐diffusiophoresis like that of Pt‐modified Janus silica motors. These motors could reversibly change the direction of motion with the transition of the hydrophobic and hydrophilic states of the grafted PNIPAM brushes. Such a thermoresponsive polymer brush functionalization method provides a new strategy for engineering the kinematic behavior of phoretically driven micro/nanomotors.