2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

SET‐LRP of acrylonitrile catalyzed by tin powder

Sn(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) with carbon tetrachloride (CCl₄) as initiator and hexamethylenetetramine (HMTA) as ligand in N, N‐dimethylformamide (DMF) was studied. The polymerization obeyed first order kinetic. The molecular weight of polyacrylonitrile (PAN) increased linearly with monomer conversion and PAN exhibited narrow molecular weight distributions. Increasing the content of Sn(0) resulted in an increase in the molecular weight and the molecular weight distribution. Effects of ligand and initiator were also investigated. The block copolymer PAN‐b‐polymethyl methacrylate with molecular weight at 126,130 and polydispersity at 1.36 was successfully obtained. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Living radical polymerization of acrylonitrile catalyzed by copper with a high concentration of radical initiator and its application in removal of Ag(I) after modification

In this study, we reported the synthesis of polyacrylonitrile (PAN) via living radical polymerization in N, N‐dimethylformamide using carbon tetrachloride as initiator, copper(II) chloride (CuCl₂)/hexamethylenetetramine as catalyst system, and 2,2‐azobisisobutyronitrile as a high concentration of thermal radical initiator. The polymerization proceeded in controlled/living manner as indicated by first‐order kinetics of the polymerization with respect to the monomer concentration, linear increase of the molecular weight with monomer conversion and narrow polydispersity. Higher polymerization rate and narrower molecular weight distributions were observed with CuCl₂ less than 50 ppm. The rate of polymerization showed a trend of increase along with temperature. The modified PAN containing amidoxime group was used for extraction of Ag(I) ions from aqueous solutions. The adsorption kinetics data indicated that the adsorption process followed pseudo‐second‐order rate model. The isotherm adsorption process could be described by the Freundlich isotherm model. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of high performance polyacrylonitrile by RASA SET–LRP in the presence of Mg powder

High performance polyacrylonitrile (PAN) was prepared with Mg powder as both reducing agent (RA) and supplemental activator (SA) by single electron transfer‐living radical polymerization (RASA SET‐LRP). First‐order kinetics of polymerization with respect to monomer concentration, linear increase of molecular weight, and narrow polydispersity with monomer conversion, and the obtained high isotacticity PAN indicate that RASA SET‐LRP in the presence of Mg powder could simultaneously control molecular weight and tacticity of PAN. compared with that obtained with ascorbic acid (VC) as RA, an obvious increase in isotacticity of PAN was observed. the block copolymer pan‐b‐pAN with molecular weight at 112,460, polydispersity at 1.33, and isotacticity at 0.314 was successfully prepared. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3328–3332     

Samarium powder as catalyst for SET‐LRP of acrylonitrile in 1,1,1,3,3,3‐hexafluoro‐2‐propanol for control of molecular weight and tacticity

Samarium powder was applied as a catalyst for single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) with 2‐bromopropionitrile as initiator and N,N,N′,N′‐tetramethylethylenediamine as ligand. First‐order kinetics of polymerization with respect to the monomer concentration, linear increase of the molecular weight with monomer conversion, and the highly syndiotactic polyacrylonitrile (PAN) obtained indicate that the SET‐LRP of AN could simultaneously control molecular weight and tacticity of PAN. An increase in syndiotacticity of PAN obtained in HFIP was observed compared with that obtained by SET‐LRP in N,‐N‐dimethylformamide (DMF). The syndiotacticity markedly increased with the HFIP volume. The syndiotacticity of PAN prepared by SET‐LRP of AN using Sm powder as catalyst in DMF was higher than that prepared with Cu powder as catalyst. The increase in syndiotacticity of PAN with Sm content was more pronounced than the increase in its isotacticity. The block copolymer PAN‐b‐polymethyl methacrylate (52,310 molecular weight and 1.34 polydispersity) was successfully prepared. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Porphyrin derivatives act as vinylene monomers in TEMPO‐mediated radical copolymerization with styrene

In this article, we offer clear evidence for the radical copolymerizability of porphyrin rings in 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐mediated radical copolymerizations with styrene. The radical copolymerizations of styrene with 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (H₂TFPP) was conducted using 1‐phenyl‐1‐(2,2,6,6‐tetramethyl‐1‐piperidinyloxy)ethane as an initiator. The refractive index (RI) traces for the size‐exclusion chromatography of the resulting copolymers were unimodal with narrow molecular weight distributions. The RI traces shifted toward higher molecular weight regions as the polymerization progressed, and the number‐average molecular weights were close to those calculated on the basis of the feed compositions and monomer conversions. These features were in good agreement with a TEMPO‐mediated mechanism. The traces recorded by the ultraviolet‐visible (UV‐vis) detector (430 nm) were identical to those obtained by the RI detector, indicating a statistical copolymerization of styrene with H₂TFPP. This also indicated that H₂TFPP acted as a monomer and not as a terminator or a chain‐transfer agent under the conditions used. A benzyl radical addition to H₂TFPP was conducted as a model reaction for the copolymerization using tributyltin hydride as a chain‐transfer agent, affording a reduced porphyrin, 2‐benzyl‐5,10,15,20‐tetrakis(pentafluorophenyl)chlorin 1 , via radical addition to the β‐pyrrole position. The UV‐vis spectrum of 1 was fairly similar to that of poly(styrene‐co‐H₂TFPP), indicating that H₂TFPP polymerized at its β‐pyrrole position in the TEMPO‐mediated radical polymerization. TEMPO‐mediated radical copolymerizations of styrene with several porphyrin derivatives were also demonstrated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and characterization of optically active polystyrene via a chiral nitroxide‐mediated polymerization

2,2,6,6‐Tetramethyl‐4‐[d‐(+)‐10‐camphorsulfonyl]‐1‐piperidinyloxy was synthesized and used as a chiral nitroxide for the bulk polymerizations of styrene initiated with benzoyl peroxide (BPO), tetraethylthiuram disulfide (TETD), and thermal initiation. The results showed that the polymerizations proceeded in a controlled/living way; that is, the kinetics presented approximately first‐order plots, and the number‐average molecular weights of the polymers with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) increased with the monomer conversion linearly. The molecular weight distributions in the case of thermal initiation were narrower than those in the case of BPO and TETD, whereas the polymerization rate with BPO or TETD as an initiator was obviously faster than that with thermal initiation. In addition, successful chain‐extension reactions were carried out, and the structures of the obtained polymers were characterized by gel permeation chromatography and ¹H NMR. The specific rotations of the polymers were also measured by polarimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1522–1528, 2006     

Cu powder‐catalyzed single electron transfer‐living radical polymerization of acrylonitrile

Single electron transfer‐living radical polymerization (SET‐LRP) has been used as a new technique for the synthesis of polyacrylonitrile (PAN) catalyzed by Cu(0) powder with carbon tetrachloride (CCl₄) as the initiator and hexamethylenetetramine (HMTA) as the ligand in N,N‐dimethylformamide (DMF) or mixed solvent. Well‐controlled polymerization has been achieved as evidenced by a linear increase of molecular weight with respect to monomer conversion as well as narrow molecular weight distribution. Kinetics data of the polymerizations at both ambient temperature and elevated temperature demonstrate living/controlled feature. An increase in the concentration of ligand yields a higher monomer conversion within the same time frame and almost no polymerization occurs in the absence of ligand due to the poor disproportionation reaction of Cu(I). The reaction rate exhibits an increase with the increase of the amount of catalyst Cu(0)/HMTA. Better control on the molecular weight distribution has been produced with the addition of CuCl₂. In the presence of more polar solvent water, it is observed that there is a rapid increase in the polymerization rate. The effect of initiator on the polymerization is also preliminarily investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

SET‐LRP of methyl methacrylate initiated with sulfonyl halides

Single electron transfer‐living radical polymerization (SET‐LRP) represents a robust and versatile method for the rapid synthesis of macromolecules with defined architecture. The present article describes the polymerization of methyl methacrylate by SET‐LRP in protic solvent mixtures. Herein, the polymerization process was catalyzed by a straightforward Cu(0)wire/Me₆‐TREN catalyst while initiation was obtained by toluenesulfonyl chloride. All experiments were conducted at 50 °C and the living polymerization was demonstrated by kinetic evaluation of the SET‐LRP. The process follows first order kinetic until all monomer is consumed which was typically achieved within 4 h. The molecular weight increased linearly with conversion and the molecular weight distributions were very narrow with M_w/M_n ～ 1.1. Detailed investigations of the polymer samples by MALDI‐TOF confirmed that no termination took place and that the chain end functionality is retained throughout the polymerization process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2236–2242, 2010     

SET‐LRP of methyl methacrylate initiated with CCl4 in the presence and absence of air

Single electron transfer‐living radical polymerization (SET‐LRP) represents a robust and versatile method for the rapid synthesis of macromolecules with defined architecture. The synthesis of poly(methyl methacrylate) via SET‐LRP in dimethyl sulfoxide (DMSO) by using CCl₄ as initiator is demonstrated in this work. Resorting to a rather simple Cu(0)/Me₆‐TREN catalyst a method was established that allowed for the straightforward design of well‐defined poly(methyl methacrylate). The reactions were performed at various temperatures (25, 50, 60, and 80 °C) and complete monomer conversion could be achieved. The polymerizations obeyed first order kinetic, the molecular weights increased linearly with conversion and the polymers exhibited narrow molecular weight distributions all indicating the livingness of the process. By providing a small amount of hydrazine to the reaction mixture the polymerization could be conducted in presence of air omitting the need for any elaborated deoxygenation procedures. This methodology offers an elegant way to synthesize functionalized poly(methyl methacrylate) with perfect control over the polymerization process as well as molecular architecture. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2243–2250, 2010     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Seleno‐containing poly(vinyl acetate) prepared by diselenocarbonates‐mediated controlled free radical polymerizations

The living free radical polymerizations of vinyl acetate (VAc) were successfully achieved in the presence of a novel organic selenium compound (diselenocarbonates), with 2,2′‐azobisisobutyronitrile (AIBN) as the initiator. The living characteristics of the VAc polymerization were confirmed by the linear first‐order kinetic plots and linear increase of molecular weights (M_n) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions. In addition, the end of the polymers contains selenium element which may be useful in biotechnological and biomedical applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3159–3165     

Optimization of an α‐(Amino acid)‐N‐carboxyanhydride polymerization using the high vacuum technique: Examining the effects of monomer concentration,polymerization kinetics,polymer molecular weight,and monomer purity

l ‐Ornithine‐based poly(peptides) have been widely utilized in the field of drug delivery, however few studies have been conducted examining the details of polymerization. In this article, the effects of monomer concentration, polymerization kinetics, polymer molecular weight and monomer purity were investigated using l ‐carboxybenzyl (Cbz)‐ornithine as a model monomer. The mechanism of polymerization herein follows the normal amine mechanism to produce poly(peptides) having controlled molecular weights, known chain ends and a narrow polydispersity index (PDI). A preferred monomer concentration range was determined, which required minimal polymerization times and allowed for predictable and reproducible molecular weights with narrow PDIs. The impact of monomer purity on the polymerization was established and monomer purification conditions are reported, which produce high‐purity monomer after a single recrystallization. Additionally, the optimized polymerization conditions and monomer purification protocol were combined with a sequential monomer addition technique to produce high molecular weight poly(ornithine) with a narrow PDI and known chain ends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1385–1391     

Reversible‐addition fragmentation chain transfer radical emulsion polymerization by a nanoprecipitation process

Polymerizations of styrene under emulsion reversible‐addition fragmentation chain transfer polymerization conditions are reported. Using a recently developed nanoprecipitaiton process, emulsion particles were formed by the precipitation of an acetone solution of a macroRAFT agent into an aqueous solution of poly(vinyl alcohol). The particles were then swollen with monomer and subsequently polymerized. Emulsion polymerizations were performed at 65 and 75 °C in which either KPS, BPO, or a combination of both was used as an initiating source. Reactions were also performed at temperatures over 100 °C in which the thermal initiation of styrene was used as an initiating source. In all cases, the polymerizations proceeded in a living manner, yielding polymers that showed an incremental increase in molecular weight with time and had narrow molecular weight distributions. Plots of number‐ average molecular weight versus conversion were linear, indicating a controlled polymerization. The resulting latices were colloidally stable and gave particle size distributions with a typical average particle diameter in the 150 nm range. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5708–5718, 2006     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Iron‐mediated atom transfer radical polymerization of styrene with tris(3,6‐dioxaheptyl) amine as a ligand

The atom transfer radical bulk polymerization of styrene with FeX₂ (X = Br or Cl)/tris(3,6‐dioxaheptyl) amine as the catalyst system was successfully implemented at 110 °C. The number‐average molecular weight of the polymers with a narrow molecular weight distribution (weight‐average molecular weight/number‐average molecular weight = 1.2–1.5) increased linearly with the monomer conversion and matched the predicted molecular weight. The polymerization rate, initiation efficiency, and molecular weight distribution were influenced by the selection of the initiator and iron halide. The high functionality of the halide end group in the obtained polymers was confirmed by both ¹H NMR and a chain‐extension reaction. Because of its water solubility, the iron complexes could be removed easily from the reaction mixture through the washing of the polymerization mixture with water. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 483–489, 2006     

“Living”/controlled free radical polymerization of MMA in the presence of cobalt(II) 2‐ethylhexanoate: A switch from RAFT to ATRP mechanism

A metal complex, cobalt(II) 2‐ethylhexanoate (CEH), was added to the system of thermal‐initiated reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as the RAFT agent at 115 °C. The polymerization rate was remarkably enhanced in the presence of CEH in comparison with that in the absence of CEH, and the increase of the CPDN concentration also accelerated the rate of polymerization. The polymerization in the concurrence of CPDN and CEH demonstrated the characters of “living”/controlled free radical polymerization: the number‐average molecular weights (M_n) increasing linearly with monomer conversion, narrow molecular weight distributions (M_w/M_n) and obtained PMMA end‐capped with the CPDN moieties. Meanwhile, CEH can also accelerate the rate of RAFT polymerization of MMA using the PMMA as macro‐RAFT agent instead of CPDN. Similar polymerization profiles were obtained when copper (I) bromide (CuBr)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine was used instead of CEH. Extensive experiments in the presence of butyl methacrylate, bis(cyclopentadienyl) cobalt(II) and cumyl dithionaphthalenoate were also conducted; similar results as those of MMA/CPDN/CEH system were obtained. A transition of the polymerization mechanism, from RAFT process without CEH addition to atom transfer radical polymerization in the presence of CEH, was possibly responsible for polymerization profiles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5722–5730, 2007     

Living cationic polymerization of vinyl ethers with a urethane group

To study the possibility of living cationic polymerization of vinyl ethers with a urethane group, 4‐vinyloxybutyl n‐butylcarbamate ( 1 ) and 4‐vinyloxybutyl phenylcarbamate ( 2 ) were polymerized with the hydrogen chloride/zinc chloride initiating system in methylene chloride solvent at ?30 °C ([monomer]₀ = 0.30 M, [HCl]₀/[ZnCl₂]₀ = 5.0/2.0 mM). The polymerization of 1 was very slow and gave only low‐molecular‐weight polymers with a number‐average molecular weight (M_n) of about 2000 even at 100% monomer conversion. The structural analysis of the products showed occurrence of chain‐transfer reactions because of the urethane group of monomer 1 . In contrast, the polymerization of vinyl ether 2 proceeded much faster than 1 and led to high‐molecular‐weight polymers with narrow molecular weight distributions (MWDs ≤ ～1.2) in quantitative yield. The M_n's of the product polymers increased in direct proportion to monomer conversion and continued to increase linearly after sequential addition of a fresh monomer feed to the almost completely polymerized reaction mixture, whereas the MWDs of the polymers remained narrow. These results indicated the formation of living polymer from vinyl ether 2 . The difference of living nature between monomers 1 and 2 was attributable to the difference of the electron‐withdrawing power of the carbamate substituents, namely, n‐butyl for 1 versus phenyl for 2 , of the monomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2960–2972, 2004     

Atom transfer radical polymerization of styrene using the novel initiator ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate

The atom transfer radical polymerizations (ATRPs) of styrene initiated by a novel initiator, ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate (EDDCB), in both bulk and solution were successfully carried out in the presence of copper(I) bromide (CuBr) and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 115 °C. The polymerization rate was first‐order with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with very narrow molecular weight distributions (as low as 1.17) up to higher conversions in both bulk and solution. The polymerization rate was influenced by various solvents in different degrees in the order of cyclohexanone > dimethylformamide > toluene. The molecular weight distributions of the produced polymers in cyclohexanone were higher than those in dimethylformamide and toluene. The results of ¹H NMR analysis and chain extension confirmed that well‐defined polystyrene bearing a photo‐labile N,N‐(diethylamino)dithiocarbamoyl group was obtained via ATRP of styrene with EDDCB as an initiator. The polymerization mechanism for this novel initiation system is a common ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 32–41, 2006