Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic carbonate structure

A styrene‐based monomer having a five‐membered cyclic carbonate structure, 4‐vinylbenzyl 2,5‐dioxoran‐3‐ylmethyl ether (VBCE), was prepared by lithium bromide‐catalyzed addition of carbon dioxide to 4‐vinylbenxyl glycidyl ether (VBGE). Radical polymerization of the obtained VBCE was carried out using 2,2′‐azobisisobutyronitrile as an initiator. PolyVBCE with number‐averaged molecular weight higher than 13,800 was obtained by a solution polymerization in N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, and methyl ethyl ketone. The glass transition temperature and 5 wt % decomposition temperature of the polyVBCE were determined to be 52 and 305 °C by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBCE repeating unit can be also obtained via chemical modification of polyVBGE, that is, a lithium‐bromide‐catalyzed addition of carbon dioxide to a polyVBGE prepared from a radical polymerization of VBGE. Further copolymerization of VBCE with styrene gave the corresponding copolymer in a high yield. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and polymerization of styrene monomers bearing spiroorthoester structure and volume change during crosslinking by double ring‐opening of the pendant spiroorthoesters of the obtained polymers

Novel styrene monomers bearing a five or seven‐membered spiroorthoester structure (SOE5, SOE7) were synthesized and their radical polymerizations as well as volume change during crosslinking of the obtained polymers were investigated. SOE5 and SOE7 were prepared from 4‐vinylbenzyl glycidyl ether and γ‐butyrolactone or ε‐caprolactone using boron trifluoride diethyl ether complex as a catalyst, respectively. Radical polymerizations of these monomers using 2,2′‐azobisisobutyronitrile (AIBN) gave the corresponding styrene‐based polymers with keeping the spiroorthoester structures unchanged. These polymers could be transformed to networked polymers by heating with a sulfonium antimonate, a thermally latent cationic polymerization initiator. Copolymerization of SOE5 or SOE7 with styrene at various compositions was carried out to efficiently obtain the corresponding copolymers, respectively. These polymers and copolymers showed little volume shrinkage or slight volume expansion during the crosslinking. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1790–1795     

Alkoxyamine‐mediated “living” radical polymerization: MS investigation of the early stages of styrene polymerization initiated by cumyl‐TEISO

A new series of 1,1,3,3‐tetraethylisoindoline‐2‐oxyl (TEISO)‐based alkoxyamines was prepared. The half‐lives for thermal dissociation indicated that the most sterically congested cumyl‐TEISO alkoxymine had the greatest potential as an initiator for the polymerization of monomers at lower temperatures. The polymerization of styrene at 110 °C gave a linear evolution of M_n with conversion in the early stages. Further evidence for the “living” nature was given by the polydispersities of the polymers that remained low (M_w/M_n = 1.13–1.27) throughout the polymerization (up to 80% conversion). No polymer was formed for the styrene system in a reasonable time below 100 °C. High‐performance liquid chromatographic/mass spectrometric investigations of the distribution of trapped oligomers containing one to nine monomer units formed at 60 °C revealed that the trapping of oligomeric cumyl–styryl radicals by TEISO is irreversible at this temperature. Methyl methacrylate polymerized with cumyl‐TEISO at 60–70 °C, although the initial high rates of polymerization soon decreased to zero at low conversions (10–15%), and the high polydispersities (M_w/M_n = 1.42–1.73) indicated significant side reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1232–1241, 2001     

Polymerization of o‐quinodimethanes. IV. Radical polymerization of 1‐cyano‐o‐quinodimethane in the presence of TEMPO

The radical polymerization behavior of 1‐cyano‐o‐quinodimethane generated by thermal isomerization of 1‐cyanobenzocyclobutene in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxide (TEMPO) and the block copolymerization of the obtained polymer with styrene are described. The radical polymerization of 1‐cyanobenzocyclobutene was carried out in a sealed tube at temperatures ranging from 100 to 150 °C for 24 h in the presence of di‐tert‐butyl peroxide (DTBP) as a radical initiator and two equivalents of TEMPO as a trapping agent of the propagation end radical to obtain hexane‐insoluble polymer above 130 °C. Polymerization at 150 °C with 5 mol % of DTBP in the presence of TEMPO resulted in the polymer having a number‐average molecular weight (M_n ) of 2900 in 63% yield. The structure of the obtained polymer was confirmed as the ring‐opened polymer having a TEMPO unit at the terminal end by ¹H NMR, ¹³C NMR, and IR analyses. Then, block copolymerization of the obtained polymer with styrene was carried out at 140 °C for 72 h to give the corresponding block copolymer in 82% yield, in which the unimodal GPC curve was shifted to a higher molecular weight region. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3434–3439, 2000     

Visualization of arborescent architecture of polystyrenes prepared by raft‐based initiator‐monomer polymerization using atomic force microscopy

This article presents the utilization of “molecular amplification” to visualize the molecular architecture of “arborescent” (tree‐like) polystyrenes (arbPSs) using atomic force microscopy (AFM). arbPSs with M_n > 80,000 g/mol were synthesized via initiator‐monomer‐type (inimer) RAFT polymerization of styrene mediated by 4‐vinylbenzyl dithiobenzoate in bulk. These arbPS were then used as macrochain transfer agents for polymerization of vinylbenzyl chloride (VBCl) to give arborescent poly(styrene‐block‐vinylbenzyl chloride) (arbPS‐b‐VBCl). Poly(styryl) diphenylethyl lithium (M_n = 11,000 g/mol) was then grafted onto the VBCl units of the arbPS‐b‐VBCl. The M_n of the amplified arbPSs increased over >10 million g/mol, exceeding the exclusion limit of our size exclusion chromatography equipment. AFM confirmed the proposed branches on branches architecture in the samples, together with lesser branched species. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A rapid‐injection NMR study of the effect of lithium alkoxides on the butyllithium‐initiated polymerization and propagation of styrene

In studies carried out in THF at −80°C, lithium n‐butoxide was found to speed up the initiation and to an even greater extent the rate of propagation in the alkyllithium‐initiated polymerization of styrene. Bulky alkoxides were found to slow down the rate of polymerization by slowing both initiation and propagation although initiation was decreased to a greater extent than propagation. Five equivalents of lithium tert‐butoxide stopped the initiation completely under these reaction conditions when n‐butyllithium was used as an initiator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1157–1168, 1999     

Styrene 4‐vinylbenzocyclobutene copolymer for microelectronic applications

Styrene and 4‐vinylbenzocyclobutene (vinyl‐BCB) random copolymers were prepared by free radical polymerization and studied for suitability as a dielectric material for microelectronic applications. The percentage of vinyl‐BCB in the copolymer was varied from 0 to 26 mol % to optimize the physical and mechanical properties of the cured copolymer as well as the cost. Copolymer in which 22 mol % of vinyl‐BCB was incorporated along with styrene produced a thermoset polymer which, after cure, did not show a T_g before decomposition at about 350 °C. The polymeric material has a very low dielectric constant, dissipation factor, and water uptake. The fracture toughness of the copolymer was improved with the addition of 20 wt % of a star‐shaped polystyrene‐block‐polybutadiene. Blends of the poly(styrene‐co‐vinyl‐BCB) with the thermoplastic elastomer provided material that maintained high T_g of the cured copolymer with only a slight decrease in thermal stability. The crosslinked styrenic polymer and toughened blends possess many properties that are desirable for high frequency‐high speed mobile communication applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2799–2806, 2008     

Relevance of a prereaction for the in situ NMP of styrene using the C‐Phenyl‐N‐tert‐butylnitrone/2,2′‐azobis(isobutyronitrile) pair

In this article, we compare two routes for carrying out in situ nitroxide‐mediated polymerization of styrene using the C‐phenyl‐N‐tert‐butylnitrone (PBN)/2,2′‐azobis(isobutyronitrile) (AIBN) pair to identify the best one for an optimal control. One route consists in adding PBN to the radical polymerization of styrene, while the other approach deals with a prereaction between the nitrone and the free radical initiator prior to the addition of the monomer and the polymerization. The combination of ESR and kinetics studies allowed demonstrating that when the polymerization of styrene is initiated by AIBN in the presence of enough PBN at 110 °C, fast decomposition of AIBN is responsible for the accumulation of dead polymer chains at the early stages of the polymerization, in combination with controlled polystyrene chains. On the other hand, PBN acts as a terminating agent at 70 °C with the formation of a polystyrene end‐capped by an alkoxyamine, which is not labile at this temperature but that can be reactivated and chain‐extended by increasing the temperature. Finally, the radical polymerization of styrene is better controlled when the nitrone/initiator pair is prereacted at 85 °C for 4 h in toluene before styrene is added and polymerized at 110 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1085–1097, 2009     

Synthesis of proton‐conducting membranes by the utilization of preirradiation grafting and atom transfer radical polymerization techniques

The atom transfer radical polymerization (ATRP) of styrene onto poly(vinylidene fluoride)‐graft‐poly(vinylbenzyl chloride) (PVDF‐g‐PVBC) membranes was investigated. Novel membranes were designed for fuel‐cell applications. The benzyl chloride groups in the PVDF‐g‐PVBC membranes functioned as initiators, and a Cu‐based catalytic system with the general formula Cu(n)X_n/ligand [where X is Cl or Br and the ligand is 2,2′‐bipyridyl (bpy)] was employed for the ATRP. In addition, 10 vol % dimethylformamide was added for increased solubility of the catalyst complex in styrene. The system was homogeneous, except for the membrane, when the initiator/copper halide/ligand/monomer molar ratio was 1/1/3/500. As anticipated, the fastest polymerization rate of styrene was observed with the copper bromide/bpy‐based catalyst system. The reaction rate was strongly temperature‐dependent within the studied temperature interval of 100–130 °C. The degree of grafting increased linearly with time, thereby indicating first‐order kinetics, regardless of the polymerization temperature. Furthermore, 120 °C was the maximum polymerization temperature that could be used in practice because the membrane structure was destroyed at higher temperatures. The degree of styrene grafting reached 400% after 3 h at 120 °C. Such a high degree of grafting could not be reached with conventional uncontrolled radiation‐induced grafting methods because of termination reactions. On the basis of an Arrhenius plot, the activation energy for the homogeneous ATRP of styrene was 217 kJ/mol. The prepared membranes became proton‐conducting after sulfonation of the polystyrene grafts. The highest conductivity measured for the prepared membranes was 70 mS/cm, which is comparable to the values normally measured for commercial Nafion membranes. The scanning electron microscopy/energy‐dispersive X‐ray results showed that the membranes had to be grafted through the matrix with both PVBC and polystyrene to become proton‐conducting after sulfonation. In addition, PVDF‐g‐[PVBC‐g‐(styrene‐block‐tert‐butyl acrylate)] membranes were also synthesized by ATRP. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 591–600, 2002; DOI 10.1002/pola.10146     

Synthesis of sulfur‐containing hyperbranched polymers by the bisthiolation polymerization of diethynyl disulfide derivatives

The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by ¹H and ¹³C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl₃. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007     

In situ atom transfer radical polymerization of styrene with a tetraethylthiuram disulfide/copper bromide/2,2′‐bipyridine initiating system

The living radical polymerization of styrene in bulk was successfully performed with a tetraethylthiuram disulfide/copper bromide/2,2′‐bipyridine (bpy) initiating system. The initiator Et₂NCS₂Br and the catalyst cuprous bromide (CuBr) were produced from the reactants in the system through in situ atom transfer radical polymerization (ATRP). A plot of natural logarithm of the ratio of original monomer concentration to monomer concentration at present, ln([M]₀/[M]) versus time gave a straight line, indicating that the kinetics was first‐order. The number‐average molecular weight from gel permeation chromatography (GPC) of obtained polystyrenes did not agree well with the calculated number‐average molecular weight but did correspond to a 0.5 initiator efficiency. The polydispersity index (i.e., the weight‐average molecular weight divided by the number‐average molecular weight) of obtained polymers was as low as 1.30. The resulting polystyrene with α‐diethyldithiocarbamate and ω‐Br end groups could initiate methyl methacrylate polymerization in the presence of CuBr/bpy or cuprous chloride/bpy complex catalyst through a conventional ATRP process. The block polymer was characterized with GPC, ¹H NMR, and differential scanning calorimetry. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4001–4008, 2001     

Anionic polymerization of n‐hexyl isocyanate with monofuctional initiators. Synthesis of well‐defined diblock copolymers with styrene and isoprene

Several monofunctional initiators, such as s‐BuLi, 1,1‐diphenyl‐4‐methylpentyl lithium (DPMPL), benzyl potassium (BzK), triphenylmethyl sodium (trityl sodium, TrNa) and benzyl sodium (BzNa) were tested and evaluated for the polymerization of n‐hexyl isocyanate (HIC) in THF at ?98 °C. The polymerizations were conducted either without or with additives, such as LiBPh₄, NaBPh₄, and crown ether 18C6. The products were characterized by size exclusion chromatography (SEC), membrane osmometry (MO), and ¹H NMR spectroscopy. The best results regarding polymerization yield, molecular weight distribution, and agreement between the stoichiometric and the experimentally observed molecular weight were obtained by the initiating system BzNa/NaBPh₄ in a molar ratio 1/10. By using BzNa/NaBPh₄ system, well‐defined block copolymers of HIC with styrene or isoprene were synthesized for the first time. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3533–3542, 2005     

Allyl ethers as combined plasticizing and crosslinkable side groups in polycarbonate‐based polymer electrolytes for solid‐state Li batteries

Allyl ether‐functional polycarbonates, synthesized by organocatalytic ring‐opening polymerization of the six‐membered cyclic carbonate monomer 2‐allyloxymethyl‐2‐ethyltrimethylene carbonate, were used to prepare non‐polyether polymer electrolytes. UV‐crosslinking of the allyl side groups provided mechanically stable electrolytes with improved molecular flexibility—T_g below ?20 °C—and higher ionic conductivity—up to 4.3 × 10^?7 S/cm at 25 °C and 5.2 × 10^?6 S/cm at 60 °C—due to the plasticizing properties of the allyl ether side groups. The electrolyte function was additionally demonstrated in thin‐film Li battery cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2128–2135     

Radical ring‐opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2‐isopropenyl‐3‐phenyloxirane and styrene and its functionalization

The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (M_n) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the ¹H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The M_n value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000     

Degradable alternating polyperoxides from poly(ethylene glycol)‐substituted styrenic monomers with water solubility and thermoresponsiveness

Water soluble alternating copolymers were prepared by oxidative free radical copolymerization of 4‐vinylbenzyl methoxypoly(oxyethylene) ether (PEGSt) and molecular oxygen at 50 °C. NMR spectroscopy established alternate sequence of PEGSt and peroxy bonds ( O O ) along the polymer main‐chain. The obtained polymers show temperature induced hydrophilic to hydrophobic phase separation, confirmed by UV‐visible spectroscopy and dynamic light scattering. The cloud point temperature (T_CP) of the polymers can be tuned by changing the chain length of side‐chain poly(ethylene oxide) and incorporation of hydrophobic methyl methacrylate in the copolyperoxides. Exothermic degradation of these polyperoxides was confirmed by differential scanning calorimetry and the degradation products have been characterized by electron impact mass spectroscopy. Finally, N,N‐dimethylacrylamide was polymerized in the presence of these polyperoxides in toluene, highlighting their potential as polymeric free radical initiator during polymerization of vinyl monomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2030–2038     

Cationic polymerization of a novel oxetane‐bearing ionic liquid structure and properties of the obtained poly(ionic liquid)

An ionic liquid, 1‐ethyl‐3‐(3‐ethyl‐3‐oxetanylmethyl)imidazolium bis(trifluoromethanesulfonyl)imide (OXImTFSI), was synthesized, and its cationic polymerization was examined. The heating of a mixture of 1‐ethylimidazole and 3‐chloromethyl‐3‐ethyloxetane at 90 °C for 48 h yielded 1‐ethyl‐3‐(3‐ethyl‐3‐oxetanylmethyl)imidazolium chloride, which was transformed to a room‐temperature ionic liquid, OXImTFSI, by ion exchange with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). This ionic liquid was polymerized using boron trifluoride ethyl ether complex as a catalyst to give polyOXImTFSI. Five percent weight loss temperature (T_d5) of polyOXImTFSI evaluated by thermal gravimetric analysis was 409 °C, indicating the high thermal stability. Glass transition temperature (T_g) of the polymer evaluated by differential scanning calorimetry was ?19 °C, indicating the high flexibility of the material. Ionic conductivity of polyOXImTFSI was determined to be 1.86 × 10^?8 S/cm at 23 °C, which was far lower than that of the OXImTFSI monomer (5.05 × 10^?4 S/cm). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2986–2990     

Synthesis and properties of the ionomer diblock copolymer poly(4‐vinylbenzyl triethyl ammonium bromide)‐b‐polyisobutene

A new amphiphilic diblock copolymer containing an ionomer segment, poly[(4‐vinylbenzyl triethyl ammonium bromide)‐co‐(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)]‐b‐polyisobutene [poly(4‐VBTEAB)‐b‐PIB], was synthesized by the chemical modification of poly(4‐methylstyrene)‐b‐polyisobutene [poly(4‐MSt)‐b‐PIB]. First, the 4‐methylstyrene moiety in poly(4‐MSt)‐b‐PIB was brominated with azobisisobutyronitrile as an initiator at 60 °C in CCl₄, and then the highly reactive benzyl bromide groups were ionized by a reaction with triethylamine in a toluene/isopropyl alcohol (80/20 v/v) mixture at about 85 °C to produce the ionomer diblock copolymer poly(4‐VBTEAB)‐b‐PIB. The solubility of the ionomer block copolymer was quite different from that of the corresponding poly[(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)]‐b‐polyisobutene {poly[(4‐MSt)‐co‐(4‐BrMSt)]‐b‐PIB}. Transmission electron microscopy observations demonstrated that all three diblock copolymers had microphase‐separation structures in which polyisobutene (PIB) domains existed in the continuous phase of the poly(4‐methylstyrene) segment or its derivative segment matrix. Dynamic mechanical thermal analysis measurements showed that poly[(4‐MSt)‐co‐(4‐BrMSt)]‐b‐PIB had two glass‐transition temperatures (T_g's), ?56 °C for the PIB segment and 62 °C for the poly[(4‐MSt)‐co‐(4‐BrMSt)] domain, whereas poly(4‐VBTEAB)‐b‐PIB showed one T_g at ?8 °C of the PIB domain; T_g of the poly[(4‐vinylbenzyl triethyl ammonium bromide)‐co‐(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)] domain was not observable because of the strong ionic interactions resulting in a higher T_g and a retention of modulus up to 124 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2755–2764, 2003     

Synthesis of arborescent (Dendritic) polystyrenes via controlled inimer‐type reversible addition‐fragmentation chain transfer polymerization

The reversible addition‐fragmentation chain transfer (RAFT) copolymerization of styrene and 4‐vinylbenzyl dithiobenzoate, a RAFT‐based inimer (initiator‐monomer), is described. Controlled polymerization was achieved in bulk conditions using thermal initiation at 110 °C to give arborescent polystyrene (arbPSt). The number‐average molecular weights of the polymers increased linearly with conversion and were much higher than theoretically calculated for a linear polymerization, reaching M_n = 364,000 g/mol with M_w/M_n = 2.65. Branching analysis by NMR showed an average of 3.5 branches per chain. SEC data, which were similar to those measured in arborescent polyisobutylene, supported the architectural analysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7621–7627, 2008     

One‐pot exchange reaction of acyl hydrazone combined with radical polymerization of styrene derivatives bearing acyl hydrazone moieties

We developed a one‐pot reaction combining an exchange reaction of the benzylidene moiety in an acyl hydrazone with styrene radical polymerization. The one‐pot reaction of a styrene derivative bearing a 4‐(dimethylamino)benzylidene acyl hydrazone moiety was conducted in the presence of 4‐cyanobenzaldehyde and pyridinium p‐toluene sulfonate/H₂O for the exchange reaction and AIBN as the radical polymerization initiator in N,N‐dimethylformamide at 70 °C for 20 h. The exchange reaction proceeded quantitatively, with the 4‐(dimethylamino)benzylidene acyl hydrazone moiety being exchanged with 4‐(methoxy)benzylidene acyl hydrazone, and polymerization proceeded smoothly to provide the corresponding polymer in 70% yield. Compared to traditional stepwise methods and polymer post‐polymerization modifications, this one‐pot system exhibits distinct advantages for the facile and efficient preparation of various functional polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2505–2510     

Titanium‐mediated living radical styrene polymerizations. V. Cp2TiCl‐catalyzed initiation by epoxide radical ring opening: Effect of solvents and additives

The effects of solvents, additives, ligands, and solvent in situ drying agents as well as catalyst and initiator concentrations have been investigated in the Cp₂TiCl‐catalyzed radical polymerization of styrene initiated by epoxide radical ring opening. On the basis of the solubilization of Cp₂Ti(III)Cl and the polydispersity of the resulting polymer, the solvents rank as follows: dioxane ≥ tetrahydrofuran > diethylene glycol dimethyl ether > methoxybenzene > diphenyl ether ≥ bulk > toluene ? pyridine > dimethylformamide > 1‐methyl‐2‐pyrrolidinone > dimethylacetamide > ethylene carbonate, acetonitrile, and trioxane. Alkoxide additives such as aluminum triisopropoxide and titanium(IV) isopropoxide are involved in alkoxide ligand exchange with the epoxide‐derived titanium alkoxide and lead to broad molecular weight distributions, whereas similarly to strongly coordinating solvents, ligands such as bipyridyl block the titanium active site and prevent the polymerization. By contrast, softer ligands such as triphenylphosphine improve the polymerization in less polar solvents such as toluene. Although mixed hydrides such as lithium tri‐tert‐butoxyaluminum hydride, sodium borohydride, and lithium aluminum hydride react with bis(cyclopentadienyl)titanium dichloride to form mixed titanium hydride species ineffective in polymerization control, simple hydrides such as lithium hydride, sodium hydride, and especially calcium hydride are particularly effective as in situ trace water scavengers in this polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2015–2026, 2006