Acid-induced degradation of phosphorescent dopants for OLEDs and its application to the synthesis of tris-heteroleptic iridium(III) bis-cyclometalated complexes

Investigations of blue phosphorescent organic light emitting diodes (OLEDs) based on [Ir(2-(2,4-difluorophenyl)pyridine)(2)(picolinate)] (FIrPic) have pointed to the cleavage of the picolinate as a possible reason for device instability. We reproduced the loss of picolinate and acetylacetonate ancillary ligands in solution by the addition of Br?nsted or Lewis acids. When hydrochloric acid is added to a solution of a [Ir(C^N)(2)(X^O)] complex (C^N = 2-phenylpyridine (ppy) or 2-(2,4-difluorophenyl)pyridine (diFppy) and X^O = picolinate (pic) or acetylacetonate (acac)), the cleavage of the ancillary ligand results in the direct formation of the chloro-bridged iridium(III) dimer [{Ir(C^N)(2)(μ-Cl)}(2)]. When triflic acid or boron trifluoride are used, a source of chloride (here tetrabutylammonium chloride) is added to obtain the same chloro-bridged iridium(III) dimer. Then, we advantageously used this degradation reaction for the efficient synthesis of tris-heteroleptic cyclometalated iridium(III) complexes [Ir(C^N(1))(C^N(2))(L)], a family of cyclometalated complexes otherwise challenging to prepare. We used an iridium(I) complex, [{Ir(COD)(μ-Cl)}(2)], and a stoichiometric amount of two different C^N ligands (C^N(1) = ppy; C^N(2) = diFppy) as starting materials for the swift preparation of the chloro-bridged iridium(III) dimers. After reacting the mixture with acetylacetonate and subsequent purification, the tris-heteroleptic complex [Ir(ppy)(diFppy)(acac)] could be isolated with good yield from the crude containing as well the bis-heteroleptic complexes [Ir(ppy)(2)(acac)] and [Ir(diFppy)(2)(acac)]. Reaction of the tris-heteroleptic acac complex with hydrochloric acid gives pure heteroleptic chloro-bridged iridium dimer [{Ir(ppy)(diFppy)(μ-Cl)}(2)], which can be used as starting material for the preparation of a new tris-heteroleptic iridium(III) complex based on these two C^N ligands. Finally, we use DFT/LR-TDDFT to rationalize the impact of the two different C^N ligands on the observed photophysical and electrochemical properties.     

1,12-Diazaperylene and 2,11-dialkylated-1,12-diazaperylene iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6): new supramolecular assemblies

A series of new monocationic iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6) with "large-surface"α,α'-diimin ligands N^N (dap = 1,12-diazaperylene, dmedap = 2,11-dimethyl-1,12-diazaperylene, dipdap = 2,11-diisopropyl-1,12-diazaperylene) and different cyclometalating ligands C^N (piq = 1-phenylisoquinoline, bzq = benzo[h]quinoline, ppz = 1-phenylpyrazole, thpy = 2-(2-thienyl)pyridine, ppy = 2-phenylpyridine, meppy = 2-(4-methylphenyl)pyridine, dfppy = 2-(2,4-difluorophenyl)pyridine) were synthesized. The solid structures of the complexes [Ir(piq)(2)(dap)]PF(6), [Ir(bzq)(2)(dap)]PF(6), [Ir(ppy)(2)(dipdap)]PF(6), [Ir(piq)(2)(dmedap)]PF(6), [Ir(ppy)(2)(dap)]PF(6) and [Ir(ppz)(2)(dap)]PF(6) are reported. In [Ir(piq)(2)(dap)]PF(6), the dap ligand and one of the piq ligands of each cationic complex are involved in π-π stacking interactions forming supramolecular channels running along the crystallographic c axis. In the crystalline [Ir(bzq)(2)(dap)]PF(6)π-π stacking interactions between the metal complexes lead to the formation of a 2D layer structure. In addition, CH-π interactions were found in all compounds, which are what stabilizes the solid structure. In particular, a significant number of them were found in [Ir(piq)(2)(dap)]PF(6) and [Ir(bzq)(2)(dap)]PF(6). The crystal structures of [Ir(ppy)(2)(dipdap)]PF(6) and [Ir(ppy)(2)(dmedap)]PF(6) are also presented, being the first examples of bis-cyclometalated iridium(iii) complexes with phenanthroline-type α,α'-diimin ligands bearing bulky alkyl groups in the neighbourhood of the N-donor atoms. These ligands implicate a distorted octahedral coordination geometry that in turn destabilized the Ir-N(N^N) bonds. The new iridium(iii) complexes are not luminescent. All compounds show an electrochemically irreversible anodic peak between 1.15 and 1.58 V, which is influenced by the different cyclometalated ligands. All of the new complexes show two reversible successive one-electron "large-surface" ligand-centred reductions around -0.70 V and -1.30 V. Electrospray ionisation mass spectrometry (ESI-MS) and collision induced decomposition (CID) measurements were used to investigate the stability of the new complexes. Thereby, the stability agreed well with the order of the Ir-N(N^N) bond lengths.     

Synthesis, characterisation and application of iridium(III) photosensitisers for catalytic water reduction

The synthesis of novel, monocationic iridium(III) photosensitisers (Ir-PSs) with the general formula [Ir(III)(C^N)(2)(N^N)](+) (C^N: cyclometallating phenylpyridine ligand, N^N: neutral bidentate ligand) is described. The structures obtained were examined by cyclic voltammetry, UV/Vis and photoluminescence spectroscopy and X-ray analysis. All iridium complexes were tested for their ability as photosensitisers to promote homogeneously catalysed hydrogen generation from water. In the presence of [HNEt(3)][HFe(3)(CO)(11)] as a water-reduction catalyst (WRC) and triethylamine as a sacrificial reductant (SR), seven of the new iridium complexes showed activity. [Ir(6-iPr-bpy)(ppy)(2)]PF(6) (bpy: 2,2'-bipyridine, ppy: 2-phenylpyridine) turned out to be the most efficient photosensitiser. This complex was also tested in combination with other WRCs based on rhodium, platinum, cobalt and manganese. In all cases, significant hydrogen evolution took place. Maximum turnover numbers of 4550 for this Ir-PS and 2770 for the Fe WRC generated in situ from [HNEt(3)][HFe(3)(CO)(11)] and tris[3,5-bis(trifluoromethyl)phenyl]phosphine was obtained. These are the highest overall efficiencies for any Ir/Fe water-reduction system reported to date. The incident photon to hydrogen yield reaches 16.4% with the best system.     

Phosphorescent iridium(III) complex with an N^O ligand as a Hg(2+)-selective chemodosimeter and logic gate

Phosphorescent iridium(III) complexes have been attracting increasing attention in applications as luminescent chemosensors. However, no instance of an iridium(III) complex being used as a molecular logic gate has hitherto been reported. In the present study, two iridium(III) complexes, [Ir(ppy)(2)(PBT)] and [Ir(ppy)(2)(PBO)], have been synthesized (PBT, 2-(2-Hydroxyphenyl)-benzothiazole; PBO, 2-(2-hydroxyphenyl)-benzoxazole), and their chemical structures have been characterized by single-crystal X-ray analysis. Theoretical calculations and detailed studies of the photophysical and electrochemical properties of these two complexes have shown that the N^O ligands dominate their luminescence emission properties. Moreover, [Ir(ppy)(2)(PBT)], containing a sulfur atom in the N^O ligand, can serve as a highly selective chemodosimeter for Hg(2+) with ratiometric and naked-eye detection, which is associated with the dissociation of the N^O ligand PBT from the complex. Furthermore, complex [Ir(ppy)(2)(PBT)] has been further developed as an AND and INHIBIT logic gate with Hg(2+) and histidine as inputs.     

以3-乙酰基樟脑作为辅助配体的环金属铱配合物的合成及光电性能研究

以立体位阻3-乙酰基樟脑为辅助配体合成了系列新型的环金属铱配合物3-乙酰基樟脑-2-(2,4-二氟)苯基吡啶环金属铱配合物[(46dfppy)₂Ir(acam)], 3-乙酰基樟脑-2-苯基吡啶环金属铱配合物[(ppy)₂Ir(acam)], 3-乙酰基樟脑-2-苯并噻吩吡啶环金属铱配合物[(btp)₂Ir(acam)]. 将配合物的吸收光谱、光致发光光谱以及光致发光效率与辅助配体为乙酰丙酮(acac)的对应配合物进行了比较, 发现在配合物中引入具有大空间位阻的3-乙酰基樟脑使配合物的光致发光效率均有所提高. 并将(ppy)₂Ir(acam)用于有机电致发光器件, 电致发光光谱在516 nm 处有一最大强度峰, 驱动电压为12 V 时最大亮度为10930 cd/m², 最大亮度效率达到14.6 cd/A, 电压为10.7 V 时最大功率为4.23 lm/W, 亮度为698 cd/m².     

Electroluminescent Properties of LECs Based on Ionic Transition Metal Complexes Using Tetrazole-Based Ancillary Ligand

Light-emitting electrochemical cells (LECs) are a promising type of electroluminescent device for display and lighting applications. In this study, LECs based on ionic iridium complexes utilizing a tetrazole based ancillary ligand were fabricated and their electrical properties were investigated. Two new iridium(III) complexes with tetrazole based ancillary ligands, namely, [Ir(ppy)₂(tetrazole)]PF₆ (complex 1) and [Ir(dfppy)₂(tetrazole)]PF₆ (complex 2) (where ppy is 2-phenylpyridine, dfppy is 2-(2,4-difluorophenyl)pyridine, tetrazole is 5-bromo-2-(2-methyl-2H-tetrazol-5-yl)-pyridine and PF₆ is hexafluorophosphate), have been synthesized and characterized. These synthesized complexes were used for the fabrication of LEC devices. LECs based on complex 1 result in orange light emission (576 nm) with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.45, 0.49), while complex 2 emits green (518 nm) electroluminescence with the CIE coordinates of (0.33, 0.49). Our work suggests that the light emission of cationic iridium complexes can easily be tuned by the substituents on the cyclometalated ligands.     

高效发光材料[(C^N)2IrL]+阳离子配合物的结构和光谱特征

从理论上研究了一系列Ir(Ⅲ)[(C^N)2IrL]+[C^N=ppy, L=pzpy(1); C^N=dfppy, L=pzpy(2); C^N=ppy, L=pybi(3); C^N=tpy, L=acac(4); 其中ppy=2-苯基吡啶, dfppy=2-(2,4-双氟苯基)吡啶, pzpy=2-吡唑基吡啶, pybi=1-苯基-2-(吡啶基)-1H-苯并咪唑, tpy=2-(4-甲苯基)-吡啶, acac=乙酰丙酮]配合物的结构和光谱特征. 分别在B3LYP/LanL2DZ和CIS/LanL2DZ计算水平下优化了它们的基态和激发态结构. 计算得到的Ir-N, Ir-C和Ir-O基态键长和相应实验值符合较好. 在激发态下, Ir-N和Ir-C键长增加了约0.0003~0.003 nm, 而Ir-O键长则缩短了约0.0012 nm. 在含时密度泛函理论(TD-DFT)计算水平下, 结合极化连续介质模型(PCM), 得到配合物1~4的最低能的吸收和发射分别出现在398 nm(1), 370 nm(2), 419 nm(3)和437 nm(4)以及511 nm(1), 457 nm(2), 602 nm(3)和479 nm(4). 配合物1, 2, 4的跃迁属于d(Ir)+π(C^N)→π*(C^N)的电荷转移跃迁, 而化合物3的跃迁则归因于d(Ir)+π(C^N)→π*(pybi)的电荷转移跃迁. 这表明此类配合物的吸收和发射主要受前线分子轨道的金属成分控制, 同时也受辅助配体L的影响.     

Highly phosphorescence iridium complexes and their application in organic light-emitting devices

A new series of iridium(III) mixed ligand complexes TBA[Ir(ppy)(2)(CN)(2)] (1), TBA[Ir(ppy)(2)(NCS)(2)] (2), TBA[Ir(ppy)(2)(NCO)(2)] (3), and [Ir(ppy)(2)(acac)] (4) (ppy = 2-phenylpyridine; acac = acetoylacetonate, TBA = tetrabutylammonium cation) have been developed and fully characterized by UV-vis, emission, IR, NMR, and cyclic voltammetric studies. The lowest energy MLCT transitions are tuned from 463 to 494 nm by tuning the energy of the HOMO levels. These complexes show emission maxima in the blue, green, and yellow region of the visible spectrum and exhibit unprecedented phosphorescence quantum yields, 97 +/- 3% with an excited-state lifetimes of 1-3 micros in dichloromethane solution at 298 K. The near-unity quantum yields of these complexes are related to an increased energy gap between the triplet emitting state and the deactivating e(g) level that have been achieved by meticulous selection of ligands having strong ligand field strength. Organic light-emitting devices were fabricated using the complex 4 doped into a purified 4,4'-bis(carbazol-9-yl)biphenyl host exhibiting a maximum of the external quantum efficiencies of 13.2% and a power efficiency of 37 lm/W for the 9 mol % doped system.     

A cyclometalated iridium(III) complex with enhanced phosphorescence emission in the solid state (EPESS): synthesis, characterization and its application in bioimaging

Iridium(III) complexes with intense phosphorescence in solution have been widely applied in organic light-emitting diodes, chemosensors and bioimaging. However, little attention has been paid to iridium(III) complexes showing weak phosphorescence in solution and enhanced phosphorescence emission in the solid state (EPESS). In the present study, two β-diketonate ligands with different degrees of conjugation, 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HL1) and 1-phenyl-3-methyl-4-phenylacetyl-5-pyrazolone (HL2), have been synthesized to be used as ancillary ligands for two iridium(III) complexes, Ir(ppy)(2)(L1) and Ir(ppy)(2)(L2) (Hppy = 2-phenylpyridine). The two complexes have been characterized by single-crystal X-ray crystallography, (1)H NMR and elemental analysis. Interestingly, Ir(ppy)(2)(L1) is EPESS-active whereas Ir(ppy)(2)(L2) exhibits moderately intense emission both in solution and as a neat film, indicating that the degree of conjugation of the β-diketone ligands determines the EPESS-activity. The single-crystal X-ray analysis has indicated that there are π-π interactions between the adjacent ppy ligands in Ir(ppy)(2)(L1) but not in Ir(ppy)(2)(L2). Finally, EPESS-active Ir(ppy)(2)(L1) has been successfully embedded in polymer nanoparticles and used as a luminescent label in bioimaging.     

Light-emitting electrochemical cells based on a supramolecularly-caged phenanthroline-based iridium complex

The complex [Ir(ppy)(2)(pphen)][PF(6)] (Hppy = 2-phenylpyridine, pphen = 2-phenyl-1,10-phenanthroline) has been prepared and evaluated as an electroluminescent component for light-emitting electrochemical cells (LECs). Like in analogous LECs using bpy-based iridium(III) complexes a significant enhancement of the device stability is observed.     

Control of the mutual arrangement of cyclometalated ligands in cationic iridium(III) complexes. Synthesis, spectroscopy, and electroluminescence of the different isomers

Synthetic control of the mutual arrangement of the cyclometalated ligands (C^N) in Ir(III) dimers, [Ir(C^N)(2)Cl](2), and cationic bis-cyclometalated Ir(III) complexes, [Ir(C^N)(2)(L^L)](+) (L^L = neutral ligand), is described for the first time. Using 1-benzyl-4-(2,4-difluorophenyl)-1H-1,2,3-triazole (HdfptrBz) as a cyclometalating ligand, two different Ir(III) dimers, [Ir(dfptrBz)(2)Cl](2), are synthesized depending on the reaction conditions. At 80 °C, the dimer with an unusual mutual cis-C,C and cis-N,N configuration of the C^N ligands is isolated. In contrast, at higher temperature (140 °C), the geometrical isomer with the common cis-C,C and trans-N,N arrangement of the C^N ligand is obtained. In both cases, an asymmetric bridge, formed by a chloro ligand and two adjacent nitrogens of the triazole ring of one of the cyclometalated ligands, is observed. The dimers are cleaved in coordinating solvents to give the solvento complexes [Ir(dfptrBz)(2)Cl(S)] (S = DMSO or acetonitrile), which maintain the C^N arrangement of the parent dimers. Controlling the C^N ligand arrangement in the dimers allows for the preparation of the first example of geometrical isomers of a cationic bis-cyclometalated Ir(III) complex. Thus, N,N-trans-[Ir(dfptrBz)(2)(dmbpy)](+) (dmbpy = 4,4'-dimethyl-2,2'-bipyridine), with cis-C,C and trans-N,N arrangement of the C^N ligands, as well as N,N-cis-[Ir(dfptrBz)(2)(dmbpy)](+), with cis-C,C and cis-N,N C^N ligand orientation, are synthesized and characterized. Interestingly, both isomers show significantly different photophysical and electroluminescent properties, depending on the mutual arrangement of the C^N ligands. Furthermore, quantum chemical calculations give insight into the observed photophysical experimental data.     

Study on a set of bis-cyclometalated Ir(III) complexes with a common ancillary ligand

Bis-cyclometalated iridium(iii) complexes [Ir(F(2)ppy)(2)] (), [Ir(F(2)CNppy)(2)] (), [Ir(DMAF(2)ppy)(2)] () and [Ir(MeOF(2)ppy)(2)] () (F(2)ppy = 4',6'-difluoro-2-phenylpyridinate, F(2)CNppy = 5'-cyano-4',6'-difluoro-2-phenylpyridinate, DMAF(2)ppy = 4',6'-difluoro-4-dimethylamino-2-phenylpyridinate, MeOF(2)ppy = 4',6'-difluoro-4-methyl-2-phenylpyridinate and = 3,5-dimethylpyrazole-N-carboxamide) emitting in the sky blue region were synthesized. We studied the effect of the ancillary ligand and the substituents on the cyclometalating ligands on the crystal structures, photophysical and electrochemical properties and the frontier orbitals. Density functional theory (DFT) calculation results indicate that in and the cyclometalating ligands show negligible participation in the HOMO, the ancillary ligand being the main participant along with the Ir(iii) d-orbitals. exhibits the maximum photoluminescence quantum efficiency and radiative emission rates along with the dominant low frequency metal-ligand vibrations and maximum reorganization energy in the excited state. All the substituted complexes show more polar characteristics than , possessing the highest dipole moment among the complexes. The performances of the solution-synthesised organic light emitting devices (OLEDs) of , and doped in a blend of mCP (m-bis(N-carbazolylbenzene)) and polystyrene are studied.     

One-pot synthesis of strong solid state emitting mono-cyclometalated iridium(III) complexes: study of their aggregation induced enhanced phosphorescence

Strong solid-state greenish-blue emitting, mono-cyclometalated iridium complexes, [Ir(ppy)(PPh(3))(2)(H)(Cl)], 2a and [Ir(F(2)ppy)(PPh(3))(2)(H)(Cl)], 2b [ppyH = 2-phenylpyridine; F(2)ppyH = 2-(2',4'-difluoro)phenylpyridine], have been synthesized by a convenient route. The 'aggregation induced enhanced phosphorescence (AIEP)' activity exhibited by these complexes has been rationalized.     

Synthesis, structure and efficient electroluminescence of a heteroleptic dipyridylamido/bis(pyridylphenyl)iridium(III) complex

A neutral 2,2'-dipyridylamido (dpa)-supported bis(cyclometalated) iridium(III) complex [Ir(ppy)(2)(dpa)] (ppy = o-(2-pyridyl)phenyl) has been synthesized and structurally characterized for the first time, which emits green electroluminescence with high current efficiency (123.5 cd A(-1)) and high power efficiency (43.2 lm W(-1)).     

Water attack umpolung aromatic systems to release hydrogen

The synthesis and structures of a series of cyclometalated iridium(III) complexes based on benzoxazole derivatives and triphenylphospine are reported. These complexes have a general formula (C^N)(2)Ir(Cl)(pph(3)) [where C^N is a monoanionic cyclometalating ligand, dfpbo = (difluorophenyl)benzoxazolato, pbo = 2-phenylbenzoxazolato, nbo = 2-(2-naphthyl)benzoxazolato, and pph(3) is a triphenylphospine ligand]. The complexes (dfpbo)(2)Ir(Cl)(pph(3)) (2a), (pbo)(2)Ir(Cl)(pph(3)) (2b), and (nbo)(2)Ir (Cl)(pph(3)) (2c) have been structurally characterized by X-ray crystallography. Complex 2a shows facile umpolung in the phenyl rings of the arylphosphine ligand and displays a catalytic propensity for water splitting.     

Solution-processible conjugated electrophosphorescent polymers

We report the synthesis and photophysical study of a series of solution-processible phosphorescent iridium complexes. These comprise bis-cyclometalated iridium units [Ir(ppy)(2)(acac)] or [Ir(btp)(2)(acac)] where ppy is 2-phenylpyridinato, btp is 2-(2'-benzo[b]thienyl)pyridinato, and acac is acetylacetonate. The iridium units are covalently attached to and in conjugation with oligo(9,9-dioctylfluorenyl-2,7-diyl) [(FO)(n)] to form complexes [Ir(ppy-(FO)(n))(2)(acac)] or [Ir(btp-(FO)(n))(2)(acac)], where the number of fluorene units, n, is 1, 2, 3, approximately 10, approximately 20, approximately 30, or approximately 40. All the complexes exhibit emission from a mixed triplet state in both photoluminescence and electroluminescence, with efficient quenching of the fluorene singlet emission. Short-chain complexes, 11-13, [Ir(ppy-(FO)(n)-FH)(2)(acac)] where n = 0, 1, or 2, show green light emission, red-shifted through the FO attachment by about 70 meV, but for longer chains there is quenching because of the lower energy triplet state associated with polyfluorene. In contrast, polymer complexes 18-21 [Ir(btp-(FO)(n))(2)(acac)] where n is 5-40 have better triplet energy level matching and can be used to provide efficient red phosphorescent polymer light-emitting diodes, with a red shift due to the fluorene attachment of about 50 meV. We contrast this small (50-70 meV) and short-range modification of the triplet energies through extended conjugation, with the much more substantial evolution of the pi-pi* singlet transitions, which saturate at about n = 10. These covalently bound materials show improvements in efficiency over simple blends and will form the basis of future investigations into energy-transfer processes occurring in light-emitting diodes.     

Iridium(III) Complexes with [−2, −1, 0] Charged Ligand Realized Deep-Red/Near-Infrared Phosphorescent Emission

A series of [−2, −1, 0] charged-ligand based iridium(III) complexes of [Ir(bph)(bpy)(acac)] ( 1 ), [Ir(bph)(2MeO-bpy)(acac)] ( 2 ), [Ir(bph)(2CF₃-bpy)(acac)] ( 3 ), [Ir(bph)(bpy)(2^tBu-acac)] ( 4 ) and [Ir(bph)(bpy)(CF₃-acac)] ( 5 ), which using biphenyl as dianionic ligand [−2], acetylacetone (or its derivatives) as monoanionic ligand [−1], and 2,2′-bipyridine (or its derivatives) as neutral ligand [0] were designed and synthesized. The chemical structures were well characterized. All of the ligands have simple chemical structures, thus further making the complexes have excellent thermal stability and are easy to sublimate and purify. Phosphorescent characteristics with short emission lifetime were demonstrated for these emitters. Notably, all of the complexes exhibit remarkable deep red/near infrared emission, which is quite different from the reported [−1, −1, −1] charged-ligand based iridium(III) complexes. The photophysical properties of these complexes are regularly improved by introducing electron-donating or -withdrawing groups into [−1] or [0] charged-ligand. The related organic light-emitting diodes exhibited deep red/near infrared emission with acceptable external quantum efficiency and low turn-on voltage (<2.6 V). This work provides a new idea for the construction of new type phosphorescent iridium(III) emitters with different valence states of [−2, −1, 0] charged ligands, thus offering new opportunities and challenges for their optoelectronic applications.     

Luminescent iridium complexes for detection of molybdate

Reactions of [Ir(C^N)(2)Cl](2) [HC^N = 2-(3-R-phenyl)pyridine, 2-(3-R-phenylpyrazole) R = H, Me] with Me(2)-phencat give luminescent complexes [Ir(C^N)(2)(Me(2)-phencat)][PF(6)] (Me(2)-2a, b, c)[PF(6)]. Deprotection of the methoxy groups with BBr(3) is problematic as simultaneous bromination of the cyclometallated phenyl groups occurs. However, deprotection of Me(2)-phencat with BBr(3) followed by complexation with [Ir(C^N)(2)Cl](2) gives luminescent complexes [Ir(C^N)(2)(H(2)-phencat)][PF(6)] (H(2)-3a, c)[PF(6)], which are luminescent sensors for molybdate.     

Syntheses, structures, and reactivities of mono- and dinuclear iridium thiolato complexes containing nitrosyl ligands

Reactions of the iridium(III) nitrosyl complex [Ir(NO)Cl2(PPh3)2] (1) with hydrosulfide and arenethiolate anions afforded the square-pyramidal iridium(III) complex [Ir(NO)(SH)2(PPh3)2] (2) with a bent nitrosyl ligand and a series of the square-planar iridium(I) complexes [Ir(NO)(SAr)2(PPh3)] (3a, Ar = C6H2Me3-2,4,6 (Mes); 3b, Ar = C6H3Me2-2,6 (Xy); 3c, Ar = C6H2Pri3-2,4,6) containing a linear nitrosyl ligand, respectively. Complex 1 also reacted with alkanethiolate anions or alkanethiols to give the thiolato-bridged diiridium complexes [Ir(NO)(mu-SPri)(SPri)(PPh3)]2 (4) and [Ir(NO)(mu-SBut)(PPh3)]2 (5). Complex 4 contains two square-pyramidal iridium(III) centers with a bent nitrosyl ligand, whereas 5 contains two tetrahedral iridium(0) centers with a linear nitrosyl ligand and has an Ir-Ir bond. Upon treatment with benzoyl chloride, 3a and 3b were converted into the (diaryl disulfide)- and thiolato-bridged dichlorodiiridium(III) complexes [[IrCl(mu-SC6HnMe4-nCH2)(PPh3)]2(mu-ArSSAr)] (6a, Ar = Mes, n = 2; 6b, Ar = Xy, n = 3) accompanied by a loss of the nitrosyl ligands and cleavage of a C-H bond in an ortho methyl group of the thiolato ligands. Similar treatment of 4 gave the dichlorodiiridium complex [Ir(NO)(PPh3)(mu-SPri)3IrCl2(PPh3)] (7), which has an octahedral dichloroiridium(III) center and a distorted trigonal-bipyramidal Ir(I) atom with a linear nitrosyl ligand. The detailed structures of 3a, 4, 5, 6a, and 7 have been determined by X-ray crystallography.     

The role of substituents on functionalized 1,10-phenanthroline in controlling the emission properties of cationic iridium(III) complexes of interest for electroluminescent devices

The photophysical and electrochemical properties of the novel complexes [Ir(ppy)(2)(5-X-1,10-phen)][PF(6)] (ppy = 2-phenylpyridine, phen = phenanthroline, X = NMe(2), NO(2)), [Ir(pq)(2)(5-X-1,10-phen)][PF(6)] (pq = 2-phenylquinoline, X = H, Me, NMe(2), NO(2)), [Ir(ppy)2(4-Me,7-Me-1,10-phen)][PF(6)], [Ir(ppy)2(5-Me,6-Me-1,10-phen)][PF(6)], [Ir(ppy)(2)(2-Me,9-Me-1,10-phen)][PF(6)], and [Ir(pq)2(4-Ph,7-Ph-1,10-phen)][PF(6)] have been investigated and compared with those of the known reference complexes [Ir(ppy)(2)(4-Me or 5-H or 5-Me-1,10-phen)][PF(6)] and [Ir(ppy)(2)(4-Ph,7-Ph-1,10-phen)][PF(6)], showing how the nature and number of the phenanthroline substituents tune the color of the emission, its quantum yield, and the emission lifetime. It turns out that the quantum yield is strongly dependent on the nonradiative decay. The geometry, ground state, electronic structure, and excited electronic states of the investigated complexes have been calculated on the basis of density functional theory (DFT) and time-dependent DFT approaches, thus substantiating the electrochemical measurements and providing insight into the electronic origin of the absorption spectra and of the lowest excited states involved in the light emission process. These results provide useful guidelines for further tailoring of the photophysical properties of ionic Ir(III) complexes.