Construction of a Graphene/Au‐Nanoparticles/Cucurbit[7]uril‐Based Sensor for Pb2+ Sensing

The development of highly sensitive and selective methods for the detection of lead ion (Pb²⁺) is of great scientific importance. In this work, we develop a new surface‐enhanced Raman scattering (SERS)‐based sensor for the selective trace measurement of Pb²⁺. The SERS‐based sensor is assembled from gold nanoparticles (AuNPs) and graphene using cucurbit[7]uril (CB[7]) as a precise molecular glue and a local SERS reporter. Upon the addition of Pb²⁺, CB[7] forms stronger complexes with Pb²⁺ and desorbs from AuNPs, resulting in a sensitive “turn‐off” of SERS signals. This SERS‐based assay shows a limit of detection (LOD) of 0.3 nm and a linear detection range from 1 nm to 0.3 μm for Pb²⁺. The feasibility of the assay is further demonstrated by probing Pb²⁺ in real water samples. This SERS‐based analytical method is highly sensitive and selective, and therefore holds promising applications in environmental analysis.     

三明治结构纳米银/氧化石墨烯基底的制备及SERS性能

采用易操作且低成本的静电自组装方法, 在质子化的玻璃基片上, 通过交替沉积氧化石墨烯(GO) 和带正电荷的银纳米粒子(AgNPs) 获得少数层GO和AgNPs复合薄膜(AgNPs/GO). 采用紫外-可见光吸收光谱、 原子力显微镜和扫描电子显微镜对复合薄膜的生长和表面形貌进行了表征. 结果表明, 通过调控AgNPs 溶胶浓度和自组装循环次数, 可以获得AgNPs/GO/AgNPs 的三明治结构, 并在基底表面形成均匀的AgNPs 聚集体. 表面增强拉曼散射(SERS)研究结果表明, AgNPs/GO-4基底具有最佳的SERS性能, 其对罗丹明6G(R6G) 和结晶紫的平均拉曼增强因子分别为3.4×10⁸和1.3×10⁹, 对R6G的最低检测浓度约为10^-12 mol/L. 多层三明治结构和较小颗粒间距使得AgNPs层之间产生强烈的耦合作用, 并在GO片层间产生大量的“热点”, 显著提高SERS性能, 而少数层GO具有强吸附性, 有利于分子在基底中富集, 从而起到化学增强作用, 提高SERS灵敏度.     

Surface‐Enhanced Raman Scattering Based on Controllable‐Layer Graphene Shells Directly Synthesized on Cu Nanoparticles for Molecular Detection

Graphene shells with a controllable number of layers were directly synthesized on Cu nanoparticles (CuNPs) by chemical vapor deposition (CVD) to fabricate a graphene‐encapsulated CuNPs (G/CuNPs) hybrid system for surface‐enhanced Raman scattering (SERS). The enhanced Raman spectra of adenosine and rhodamine 6G (R6G) showed that the G/CuNPs hybrid system can strongly suppress background fluorescence and increase signal‐to‐noise ratio. In four different types of SERS systems, the G/CuNPs hybrid system exhibits more efficient SERS than a transferred graphene/CuNPs hybrid system and pure CuNPs and graphene substrates. The minimum detectable concentrations of adenosine and R6G by the G/CuNPs hybrid system can be as low as 10^?8 and 10^?10 M , respectively. The excellent linear relationship between Raman intensity and analyte concentration can be used for molecular detection. The graphene shell can also effectively prevent surface oxidation of Cu nanoparticles after exposure to ambient air and thus endow the hybrid system with a long lifetime. This work provides a basis for the fabrication of novel SERS substrates.     

Probing Surface Enhancement Effect of Molecules On/Between Silver Nanoparticles in Surface Enhanced Raman Scattering

To explore the mechanisms in Surface‐enhanced Raman Scattering (SERS) measurements, silver nanoparticles (AgNPs) were first prepared by a silver mirror reaction to form different particle sizes and different distributions on glass substrates. After the resulting surfaces were probed with molecules of p‐Amino‐thiophenol (pATP), p‐Nitrothiophenol (pNTP), and p‐Mercaptobenzoic acid (pMBA) individually, the substrates were placed into reaction solutions to grow additional AgNPs. In this way, probe molecules could be trapped between two nanoparticles, possibly having the so‐called “hot spot” effect. To examine the variations of morphologies of AgNPs in each of the steps, the substrates were examined by field‐emission scanning electron microscope (FE‐SEM). The morphologies also were correlated with the SERS signals. Two bands in the SERS spectra of probe molecules were selected as indications of the enhancements from electromagnetic (EM) effect and charge‐transfer (CT). Results indicate that the SERS signals from the EM effect were increased ca. 5 times after growing additional AgNPs on the molecule‐modified AgNPs substrates. The SERS signals from CT effect were increased two orders of magnitude after growing additional AgNPs. The increase of enhancement for molecules between AgNPs was caused mostly by CT effect. Based on the effect of particle size and distribution of the AgNPs, the EM effect was strongly influenced by the particle size of the AgNPs, while the CT effect was less sensitive to the variation of the morphologies of the AgNPs.     

Photochemical decoration of silver nanoparticles on magnetic microspheres as substrates for the detection of adenine by surface-enhanced Raman scattering

In this work, silver nanoparticles (AgNPs) decorated magnetic microspheres (MMs) are prepared as surface-enhanced Raman scattering (SERS) substrate for the analysis of adenine in aqueous solutions. To prepare these substrates, magnetic particles were first synthesized by coprecipitation of Fe(II) and Fe(III) with ammonium hydroxide. A thin layer of cross-linked polymer was formed on these magnetic particles by polymerization through suspension of magnetic particles into a solution of divinyl benzene/methyl methacrylate. The resulted polymer protected magnetic particles are round in shape with a size of 80 μm in diameter. To form AgNPs on these MMs, photochemical reduction method was employed and the factors in photochemical reduction method were studied and optimized for the preparation of highly sensitive and stable AgNPs on MMs substrates (abbreviated as AgMMs substrates). By dispersing the AgMMs in aqueous samples, cylindrical magnet was used to attract the AgMMs for SERS detections. The observed enhancement factor of AgMMs reached 7 orders in magnitude for detection of adenine with a detection limit approaching to few hundreds of nanomolar.     

Uniform Functionalization of High-Quality Graphene with Platinum Nanoparticles for Electrocatalytic Water Reduction

Graphene–metal composites have potential as novel catalysts due to their unique electrical properties. Here, we report the synthesis of a composite material comprised of monodispersed platinum nanoparticles on high-quality graphene obtained by using two different exfoliation techniques. The material, prepared via an easy, low-cost and reproducible procedure, was evaluated as an electrocatalyst for the hydrogen evolution reaction. The turnover frequency at zero overpotential (TOF₀ in 0.1 m phosphate buffer, pH 6.8) was determined to be approximately 4600 h⁻¹. This remarkably high value is likely due to the optimal dispersion of the platinum nanoparticles on the graphene substrate, which enables the material to be loaded with only very small amounts of the noble metal (i.e., Pt) despite the very highly active surface. This study provides a new outlook on the design of novel materials for the development of robust and scalable water-splitting devices.     

Towards Catalytically Active Porous Graphene Membranes with Pulsed Laser Deposited Ceria Nanoparticles

Porous graphene with catalytically active ceria nanometre-size particles were prepared using pulsed laser deposition (PLD) on graphene produced through chemical vapour deposition (CVD). The reported process provided porous graphene containing ceria nanoparticles as confirmed by HR TEM and XPS. Isotopically labelled ¹³C graphene was employed to study desorption of the species containing carbon. Methanol adsorption was utilised to probe the nature of the catalytic activity of prepared ceria decorated graphene. The important role of graphene support for the stabilization of reduced ceria nanoparticles was finally confirmed. Increased dehydrogenation activity of graphene with ceria nanoparticles leading to CO and H₂ formation was demonstrated.     

A Self‐assembled L‐Cysteine and Electrodeposited Gold Nanoparticles‐reduced Graphene Oxide Modified Electrode for Adsorptive Stripping Determination of Copper

Glassy carbon electrode (GCE) modified with L‐cysteine and gold nanoparticles‐reduced graphene oxide (AuNPs‐RGO) composite was fabricated as a novel electrochemical sensor for the determination of Cu²⁺. The AuNPs‐RGO composite was formed on GCE surface by electrodeposition. The L‐cysteine was decorated on AuNPs by self‐assembly. Physicochemical and electrochemical properties of L‐cysteine/AuNPs‐RGO/GCE were characterized by scanning electron microscopy, atomic force microscopy, energy dispersive spectroscopy, Raman spectroscopy, X‐ray diffraction, cyclic voltammetry and adsorptive stripping voltammetry. The results validated that the prepared electrode had many attractive features, such as large electroactive area, good electrical conductivity and high sensitivity. Experimental conditions, including electrodeposition cycle, self‐assembly time, electrolyte pH and preconcentration time were studied and optimized. Stripping signals obtained from L‐cysteine/AuNPs‐RGO/GCE exhibited good linear relationship with Cu²⁺ concentrations in the range from 2 to 60 μg L⁻¹, with a detection limit of 0.037 μg L⁻¹. Finally, the prepared electrode was applied for the determination of Cu²⁺ in soil samples, and the results were in agreement with those obtained by inductively coupled plasma mass spectrometry.     

Palladium Nanoparticles Bonded to Two‐Dimensional Iron Oxide Graphene Nanosheets: A Synergistic and Highly Reusable Catalyst for the Tsuji–Trost Reaction in Water and Air

Low cost, high activity and selectivity, convenient separation, and increased reusability are the main requirements for noble‐metal‐nanocatalyst‐catalyzed reactions. Despite tremendous efforts, developing noble‐metal nanocatalysts to meet the above requirements remains a significant challenge. Here we present a general strategy for the preparation of strongly coupled Fe₃O₄ and palladium nanoparticles (PdNPs) to graphene sheets by employing polyethyleneimine as the coupling linker. Transmission electron microscopic images show that Pd and Fe₃O₄ nanoparticles are highly dispersed on the graphene surface, and the mean particle size of Pd is around 3 nm. This nanocatalyst exhibits synergistic catalysis by Pd nanoparticles supported on reduced graphene oxide (rGO) and a tertiary amine of polyethyleneimine (Pd/Fe₃O₄/PEI/rGO) for the Tsuji–Trost reaction in water and air. For example, the reaction of ethyl acetoacetate with allyl ethyl carbonate afforded the allylated product in more than 99 % isolated yield, and the turnover frequency reached 2200 h^?1. The yield of allylated products was 66 % for Pd/rGO without polyethyleneimine. The catalyst could be readily recycled by a magnet and reused more than 30 times without appreciable loss of activity. In addition, only about 7.5 % of Pd species leached off after 20 cycles, thus rendering this catalyst safer for the environment.     

Characterization of Labeled Gold Nanoparticles for Surface-Enhanced Raman Scattering

Noble metal nanoparticles (NP) such as gold (AuNPs) and silver nanoparticles (AgNPs) can produce ultrasensitive surface-enhanced Raman scattering (SERS) signals owing to their plasmonic properties. AuNPs have been widely investigated for their biocompatibility and potential to be used in clinical diagnostics and therapeutics or combined for theranostics. In this work, labeled AuNPs in suspension were characterized in terms of size dependency of their localized surface plasmon resonance (LSPR), dynamic light scattering (DLS), and SERS activity. The study was conducted using a set of four Raman labels or reporters, i.e., small molecules with large scattering cross-section and a thiol moiety for chemisorption on the AuNP, namely 4-mercaptobenzoic acid (4-MBA), 2-naphthalenethiol (2-NT), 4-acetamidothiophenol (4-AATP), and biphenyl-4-thiol (BPT), to investigate their viability for SERS tagging of spherical AuNPs of different size in the range 5 nm to 100 nm. The results showed that, when using 785 nm laser excitation, the SERS signal increases with the increasing size of AuNP up to 60 or 80 nm. The signal is highest for BPT labelled 80 nm AuNPs followed by 4-AATP labeled 60 nm AuNPs, making BPT and 4-AATP the preferred candidates for Raman labelling of spherical gold within the range of 5 nm to 100 nm in diameter.     

Adsorbed state of p-mercaptobenzoic acid on silver nanoparticles

To exploit a gap mode plasmon in flocculates of metal nanoparticles most efficiently, the interaction between adsorbed chemical species and metal nanostructures were adjusted. We successfully formed flocculates of Ag nanoparticles (AgNPs) using electrostatic interaction between dissociated p-mercaptobenzoic acid (PMBA), protonated p-aminothiophenol (PATP) and their counter ions (Mⁿ⁺, X^m−), as well as van der Waals force between neutral PMBA, PATP and AgNPs. Detailed adsorbed state of PMBA and PATP in addition to trapped counter ions was characterized using enormous SERS enhancement in a flocculation method.     

氮掺杂碳层包覆金属钴颗粒与氮掺杂石墨烯纳米复合材料作为高容量锂离子电池负极材料

合成了一种石墨烯基纳米复合材料即：由氮掺杂碳层包覆的金属钴纳米颗粒,充分分散于氮掺杂的石墨烯表面。这种纳米复合材料进一步提高了石墨烯的导电性,增加了石墨烯的储锂容量。该材料被用作锂离子电池负极材料,在性能测试中展现了良好的循环性能,在以100 mA·g^-1的电流密度循环200圈后,放电容量高达950.1 mAh·g^-1,库伦效率约为98%。     

Biofunctionalized silver and gold nanoparticles as potential curative agents

In this study, the bark of an important medicinal plant, Indigofera aspalathoides is utilized as a bioreductant for the synthesis of silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs). The formation of nanoparticles was monitored, and the reaction parameters were optimized by UV–Vis spectroscopy. The attachment of biocomponents as stabilizer was proved employing Fourier‐transform infrared (FT‐IR) studies. Through transmission electron microscopy (TEM), the morphology was found to be predominantly spherical and a mixture of triangle and hexagon in the case of AgNPs and AuNPs, respectively. The crystallite size of AgNPs and AuNPs was affirmed through X‐ray diffraction (XRD) studies using Sherrer formula as 22.03 and 47.70 nm, respectively. DPPH method was adopted to analyse the free‐radical quenching ability, and the AgNPs, AuNPs and extract showed inhibition of 76%, 89% and 59% at a concentration of 200 μg ml^?1, and the corresponding IC₅₀ values were 86.49, 55.20 and 149.19 μg ml^?1. The binding of nanoparticles to calf‐thymus DNA (CT‐DNA) was through groove and the high binding constants (8.49 × 10⁶ M^?1 and 2.34 × 10⁷ M^?1 for AgNPs and AuNPs) point out the potential of these nanoparticles as curative drugs. The MTT assay showed that AgNPs were 100% toxic, and the low IC₅₀ value suggests that this can be used in the medicinal field as a safe drug.     

Immobilization of silver nanoparticles into POEGMA polymer brushes as SERS‐active substrates

Surface‐enhanced Raman scattering (SERS) has attracted a great deal of interest during the past four decades and emerged as an ultrasensitive optical technique for chemical and biomedical analysis. It is widely accepted that the facile fabrication of SERS substrates with high activity and good reproducibility is of crucial importance for their applications. Herein, we report on a fast and robust method for the synthesis and immobilization of silver nanoparticles (AgNPs) into poly(oligo(ethylene glycol) methacrylate) (POEGMA) brushes under mild conditions without using any reducing agents. POEGMA brushes of different chain lengths were synthesized directly on silicon wafers by surface‐initiated atom transfer radical polymerization with various reaction time. X‐ray photoelectron spectroscopy and field emission scanning electron microscope measurements indicated that the AgNPs were firmly and homogeneously embedded into POEGMA brushes. The resulting POEGMA–AgNP hybrid films were employed as SERS substrates for the detection of 4‐aminothiophenol, giving rise to an enhancement factor of up to 1.9 × 10⁶. The influence of the POEGMA's chain length on SERS performance was also investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

Graphene nanosheets decorated with Pd,Pt,Au,and Ag nanoparticles:Synthesis,characterization,and catalysis applications

We report that noble metal nanopartcles (Pd,Pt,Au,and Ag) decorated-graphene nanosheets can be synthesized with the template of graphene oxide by a one-pot solution-based method.The resulting hybrid materials are characterized by transmission electronic microscopy,energy dispersive X-ray spectroscopy,scanning electronic microscopy,atomic force microscopy,X-ray diffraction,and Raman spectroscopy,which demonstrate that the metal nanoparticles have been uniformly deposited on the surfaces of graphene nanosheet...     

Tunable Catalytic Performance and Selectivity of a Nanoparticle–Graphene Composite through Finely Controlled Nanoparticle Loading

Graphene‐based composites offer enhanced catalytic performance of metal and semiconductor nanoparticles, but their development is challenging because catalytic performance strongly depends on the structure and composition of the composite. Herein we show that the catalytic performance of a nanoparticle–graphene composite is very dependent on catalyst loading, which can be optimized for simultaneous enhancement of activity and selectivity. A glassy carbon working electrode has been modified with a gold nanoparticle–graphene (Au–G) composite with a varied number of gold nanoparticles per graphene, so that the conducting property of graphene and the electrocatalytic property of the metal were effectively coupled to give the best catalytic activity and selectivity. The modified electrode was used for simultaneous electrochemical detection of a mixture of electroactive species with high sensitivity. This result shows that the catalytic performance of a graphene‐based composite is sensitive to the catalyst loading and should be optimized for the best performance.     

Ultrafine Au and Ag Nanoparticles Synthesized from Self‐Assembled Peptide Fibers and Their Excellent Catalytic Activity

The self‐assembly of an amphiphilic peptide molecule to form nanofibers facilitated by Ag⁺ ions was investigated. Ultrafine AgNPs (NPs=nanoparticles) with an average size of 1.67 nm were synthesized in situ along the fibers due to the weak reducibility of the ‐SH group on the peptide molecule. By adding NaBH₄ to the peptide solution, ultrafine AgNPs and AuNPs were synthesized with an average size of 1.35 and 1.18 nm, respectively. The AuNPs, AgNPs, and AgNPs/nanofibers all exhibited excellent catalytic activity toward the reduction of 4‐nitrophenol, with turnover frequency (TOF) values of 720, 188, and 96 h^?1, respectively. Three dyes were selected for catalytic degradation by the prepared nanoparticles and the nanoparticles showed selective catalysis activity toward the different dyes. It was a surprising discovery that the ultrafine AuNPs in this work had an extremely high catalytic activity toward methylene blue, with a reaction rate constant of 0.21 s^?1 and a TOF value of 1899 h^?1.     

Coating of silver nanoparticles (AgNPs) on glass fibers by a chemical method as plasmonic surface-enhanced Raman spectroscopy (SERS) sensors to detect molecular vibrations of Doxorubicin (DOX) drug in blood plasma

In the present study, Doxorubicin (DOX) drug in healthy blood plasma was the focus of the investigation by surface-enhanced Raman scattering (SERS). In recent years, chemotherapy has been the most popular treatment for various types of cancer; however, its adverse side effects on the patient's health have made a negative aspect regarding the use of this technique. DOX is the most common chemotherapy drug and is used for the treatment of an extensive range of human malignancies. The surface-enhanced Raman scattering (SERS) is a precise technique for the detection of chemicals and biomaterials with significantly low concentrations. The glass fiber substrates coated with silver nanoparticles (AgNPs) have been used to detect DOX. First, the Tollens' method was applied to prepare the AgNPs, and the characteristics of fabricated AgNPs were evaluated using ultraviolet–visible spectroscopy (UV–Vis) and X-ray diffraction (XRD). Then, AgNPs were coated on the glass fiber substrate by a chemical method. Finally, the enhancement of the Raman signal resulted from the molecular vibrations of DOX was evaluated using these SERS-active substrates as plasmonic and Raman spectroscopy sensors. Afterward, for making the sensors practical, the DOX in blood plasma were deposited on the fabricated sensors, and the Raman vibrations were evaluated. The SERS-active substrates, AgNPs deposited on glass fiber substrates, were fabricated for the detection of DOX in and out of the blood plasma; the limit of detection (LOD) for both was 10^?10 M, and the mean relative standard deviation at concentrations of 10^?10 M of DOX out of blood plasma, and 10^?10 M of DOX in blood plasma were obtained to be 3.76% and 3.61%, respectively for ten repeated measurements in which the AgNPs were SERS-active substrates of the biosensors for detecting the DOX. In addition, the enhancement factor was calculated both experimentally and via finite-difference time-domain (FDTD) simulation, which was 29.76 × 10³ and 24.95 × 10³, respectively. Therefore, these SERS-active substrates can be used to develop microsensors and show positive results for SERS-based investigations.     

Label‐free Electrochemical Aptasensor for Carcino‐embryonic Antigen Based on Ternary Nanocomposite of Gold Nanoparticles,Hemin and Graphene

In this report, a label‐free electrochemical aptasensor for carcino‐embryonic antigen (CEA) was successfully developed based on a ternary nanocomposite of gold nanoparticles, hemin and graphene nanosheets (AuNPs‐HGNs). This nanocomposite was prepared by decorating gold nanoparticles on the surface of hemin functionalized graphene nanosheets via a simple wet‐chemical strategy. The aptamer can be assembled on the surface of AuNPs‐HGNs/GCE (glassy carbon electrode) through Au‐S covalent bond to form the sensing interface. Hemin absorbed on the graphene nanosheets not only acts as a protective agent of graphene sheets, but also as an in situ probe base on its excellent redox properties. Gold nanoparticles provide with both numerous binding sites for loading CEA binding aptamer (CBA) and good conductivity to promote the electron transfer. The current changes, which are caused by CEA specifically binding on the modified electrode, are exploited for the label‐free detection of CEA in a very rapid and convenient protocol. Therefore, the method has advantages of high sensitivity, wide linear range (0.0001–10 ng mL^?1), low detection limit (40 fg mL^?1) and attractive specificity. The results illustrate that the proposed label‐free electrochemical aptasensor has a potential application in the biological or clinical target analysis for its simple operation and low cost.     

Gold Nano Particle and Reduced Graphene Oxide Composite Modified Carbon Paste Electrode for the Ultra Trace Detection of Arsenic (III)

Gold nanoparticles (AuNPs) and reduced graphene oxide (RGO) composite modified carbon paste electrode (CPE) was prepared by electrodepositing AuNPs over the reduced graphene oxide (RGO) modified carbon paste electrode. The composite material was characterised using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and atomic force microscopy (AFM) techniques. The nano composite modified electrode was applied for the determination of total As and for the inorganic speciation of As(III) and As(V) in environmental samples. The linear dynamic range was obtained for the determination of As(III) in the present method from 1μgL⁻¹ to 20 μgL⁻¹ and the limit of detection(LOD) in the standard solution was found to be 0.13 μgL⁻¹ for the 300 sec deposition time in 10 mL supporting electrolyte solution. This method was applied for the determination of As (III) in water and soil samples. The results were agreed well with the result obtained from the hydride generation atomic absorption spectrometry.