Solvent-free synthesis of penta-substituted pyrroles: one-pot reaction of amine, alkyl acetoacetate, and fumaryl chloride

A novel, convenient, and efficient approach to the synthesis of penta-substituted pyrroles has been reported based on the multicomponent reaction. Solvent-free condition for the formation of enaminones from primary amines and alkyl acetoacetates and it's reaction with fumaryl chloride lead to the formation of pyrroles that have halide, CH₂CO₂H, ester functional groups, and two alkyl substitutions.     

Reactivity of mixed organozinc and mixed organocopper reagents: 6. Nickel-catalyzed coupling of methylarylzincs with primary alkyl halides; an atom-economic aryl-alkyl coupling

A nickel-catalyzed process for the cross-coupling of mixed arylzincs and primary alkyl halides has been developed. The reaction of a methylarylzinc with a primary alkyl halide in THF in the presence of NiCl₂/PPh₃ takes place with selective aryl transfer at room temperature in moderate yields. This protocol provides an atom-economic alternative to aryl-primary alkyl coupling using diarylzincs.     

Electrochemical preparation of some organotin compounds

Organotin dihalides R₂SnX₂ (X  Cl, Br, I) and their adducts with bidentate donor ligands have been prepared in high yield by the direct electrochemical reaction of metallic tin with alkyl or aryl halides in organic media at room temperature. Dimethyltin diiodide can be converted to tetramethyltin by reaction with methyl iodide at a cadmium anode. Electrochemical halide abstraction has been used to prepare R₆Sn₂ (R  Me, Ph) from the corresponding R₃Sn halide. The mechanism of these reactions is discussed.     

Zirconocene-catalyzed alkylative dimerization of 2-methylene-1,3-dithiane via a single electron transfer process to provide symmetrical vic-bis(dithiane)s

A mixture of tertiary alkyl halide and 2-methylene-1,3-dithiane was treated with butylmagnesium bromide in the presence of a catalytic amount of zirconocene dichloride. The reaction resulted in alkylative dimerization to yield the corresponding vic-bis(dithiane). The reaction would proceed as follows. A single electron transfer from low-valent zirconocene to alkyl halide would generate the corresponding alkyl radical. The radical adds to 2-methylene-1,3-dithiane to afford the corresponding radical stabilized by the two sulfur atoms. A couple of the stable radicals finally undergo dimerization.     

Alkylation of acylmetalates with alkyl halides to prepare Fischer carbene complexes: an improved protocol

Alkoxy Fischer carbene complexes have been synthesized by alkylation of lithium acylmetalates with alkyl halides in the presence of catalytic amount (5-10 mol %) of n-tetrabutylammonium bromide (n-Bu₄NBr) restricting the temperature below 55 °C to minimize decomposition of the product. The reaction occurs in a biphasic condition involving water and alkyl halide. The effect of cesium on this alkylation reaction has been studied. The presence of a radical quencher, di-tert-butyl phenol, neither affects the yield nor leads to the formation of dimer of di-tert-butyl phenol, which rules out the possibility of radical pathway mechanism. The kinetic study and the ¹H NMR spectra of products suggest an S_N2 pathway particularly involving alkyl halides.     

Hg (II) extraction in a PEG-based aqueous two-phase system in the presence of halide ions. I. Liquid phase analysis

The partition behaviour of Hg (II) was studied in an aqueous polyethylene glycol (PEG) — (NH₄)₂SO₄ two-phase system as a function of halide, halide concentration, and pH. For a system prepared by mixing equal volumes of 40 % (w/w) PEG (1550) with 40 % (w/w) (NH₄)₂SO₄, Hg(II) remains almost exclusively in the salt-rich phase. The addition of NaX (X = Cl⁻, Br⁻, I⁻) enhances Hg (II) partition into the PEG-rich phase due to the formation of halide complexes. The efficiency of halide extractants increases in the order: Cl⁻ < Br⁻ < I⁻. Mercury extraction is improved at lower halide ion concentration by higher stock salt solution acidity. From the distribution coefficients determined as a function of halide ion concentration, the extracted species were identified. The Hg (II) extractability is determined by the type and stability of the Hg (II) halide species, and depends on the stock salt solution acidity. The observed behaviour is discussed and a possible extraction mechanism is proposed.     

Alkyl halide/tertiary amine as novel initiators for free radical polymerizations of methyl methacrylate,methyl acrylate and styrene

A series of combinations of alkyl halide with tertiary amine such as ethyl α-bromophenylacetate/tris[2-(dimethylamino)ethyl)]amine (αEBP/Me₆TREN), ethyl 2-bromoisobutyrate/triethylamine (EBiB/TEA), and ethyl 2-chloropropionate/N,N,N′,N′,N′′-pentamethyldiethylenetriamine (ECP/PMDETA) have been developed as novel free radical initiators and used for the polymerizations of methyl acrylate (MA), methyl methacrylate (MMA) and styrene (St). The effects of the structure of alkyl halide and tertiary amine on the polymerization of MA were investigated. Gel permeation chromatograph (GPC) and proton nuclear magnetic resonance (¹H NMR) have been utilized to analyze the end group of the obtained poly(methyl acrylate). Electron spin resonance (ESR) spectroscopy was employed to identify the structure of the radicals produced by αEBP/Me₆TREN, and the results indicated that αEBP reacted with Me₆TREN via a single electron transfer (SET) nucleophilic mechanism to produce corresponding ethyl α-phenylacetate radicals which subsequently initiated the polymerization of MA. As both alkyl halide and tertiary amine are commercially available at low cost, non-explosive, and ease of use and storage in comparison with conventional azo, peroxide or persulfate initiators, the combination of alkyl halide and tertiary amine as a free radical initiator is promising for large-scale practical applications.     

Reaction of 2-cyanomethylbenzimidazole with alkyl halides

Refluxing 2-cyanomethylbenzimidazole in alcohol with alkyl halides led to low yields of N-alkylated products. Addition of base to the reaction mixture shifted the course of the reaction to form mainly N,C-dialkyl substituted products. In DMF or with an excess of alkyl halide at elevated temperature both N-mono- and N,N-dialkyl substituted materials were formed together.Translated from Khimiya Geterotsiklicheskikh Soedinenii, Vol. 24, No. 3, pp. 345–349, March, 1988.     

Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites

Increasing the thermal stability of organically-modified layered silicates is one of the key points in the successful technical application of polymer-layered silicate nanocomposites on the industrial scale. To circumvent the detrimental effect of the lower thermal stability of alkyl ammonium-treated montmorillonite, a series of alkyl-imidazolium molten salts were prepared and characterized by elemental analysis, thermogravimetry (TGA) and thermal desorption mass spectroscopy (TDMS). The effect of counter ion, alkyl chain length and structural isomerism on the thermal stability of the imidazolium salts was investigated. Alkyl-imidazolium-treated montmorillonite clays were prepared by ion exchange of the imidazolium salts with Na-montmorillonite. These organically-modified clays were characterized by X-ray diffraction (XRD), TDMS and thermogravimetry coupled with Fourier transform infrared spectroscopy (TGA-FTIR), and compared to the conventional quaternary alkyl ammonium montmorillonite. Results indicate that the counter ion has an effect on the thermal stability of the imidazolium salts, and that imidazolium salts with PF₆⁻, N(SO₂CF₃)₂⁻ and BF₄⁻ anions are thermally more stable than the halide salts. A relationship was observed between the chain length of the alkyl group and the thermo-oxidative stability; as the chain length increased from propyl, butyl, decyl, hexadecyl, octadecyl to eicosyl, the stability decreased. The results also show that the imidazolium-treated montmorillonite has greater thermal stability compared to the imidazolium halide. Analysis of the decomposition products by FTIR provides an insight about the decomposition products which are water, carbon dioxide and hydrocarbons.     

Hidden electrochemistry in the thermal grafting of silicon surfaces from grignard reagents

Covalent grafting of alkyl chains on silicon can be obtained by thermal treatment in Grignard reagents. Alkyl halide present in the Grignard solution as an impurity appears to play a key role in the grafting process. Grafting efficiency is improved when the alkyl halide concentration is increased. It is also enhanced on n-type substrates as compared to p-type substrates and when alkyl bromides are present in solution rather than alkyl chlorides. The grafting reaction involves a zero-current electrochemical step. A reaction model in which simultaneous Grignard oxidation and alkyl halide reduction take place at the silicon surface accounts for all these observations. Alkyl halide reduction is the rate-determining step. Negative charging of the silicon surface lowers the energetic barrier for this reaction, allowing for efficient grafting on n-Si.     

有机磷化合物的研究 X:五价膦(磷)酸酯与卤代烷在卤化钠存在下的酯烷基交换反应

A detailed study on the ester alkyl exchange reaction of various types of quinique-valent phosphorus esters with alkyl halide in the presence of sodium bromides was reported. This ester alkyl exchange reaction was evidently influenced by the structure of phosphorus esters and alkyl halides as well as by the nature of the halides of metal ions. In contrast with the reaction without sodium hadlide, the alkyl phosphinmate is more reactive than phosphonate and phosphate by treatment with alkyl halide in the presence of sodium halide. This is consistent with the high nucleophilicity of >P(CO)O- as leaving group. The reactivity of butyl halides was decreased in the following order: n-BuBr>i-BuBr=s-BuBr>t-BuBr. Alkyl iodide was proved to be more reactive than the corresponding bromide and chloride. However, the use of iodioe is limited by the formation of alkene resulted from the elimination of HI. These structural effects show the general characteristics of a nucleophilic substitution reaction. A reaction mechanism involving the formation of sodium salt intermecutiate was proposed based on the concept of HSAB principle. This reaction may, however, be used as a convenient method for the preparation of mixed esters of quinque-valent phosphorus acids.     

A novel one-pot synthesis of 2-alkylthio-1,3,4-oxadiazoles in water

A facile and one-pot protocol for the synthesis of 2-alkylthio-1,3,4-oxadiazoles is reported. This green method relies on the reaction of acid hydrazides with CS₂ and an alkyl halide. The reaction is carried out under mild and environmentally friendly procedure in water with high to excellent yields. Thirteen different valuable alkylthio-1,3,4-oxadiazoles are synthesized from cheap and easily available CS₂ with this method. This is the first report for the synthesis of 1,3,4-oxadiazoles in water.     

Cobalt-catalyzed cross-coupling reactions of alkyl halides with aryl Grignard reagents and their application to sequential radical cyclization/cross-coupling reactions

Reactions of alkyl halides with arylmagnesium bromides in the presence of cobalt(II)(diphosphine) complexes are discussed. Treatment of 1-bromooctane with phenylmagnesium bromide with the aid of a catalytic amount of CoCl₂(dppp) [DPPP=1,3-bis(diphenylphosphino)propane] yielded octylbenzene in good yield. The reaction mechanism would include single electron transfer from an electron-rich cobalt complex to alkyl halide to generate the corresponding alkyl radical. The mechanism was justified by CoCl₂(dppe)-catalyzed [DPPE=1,2-bis(diphenylphosphino)ethane] sequential radical cyclization/cross-coupling reactions of 6-halo-1-hexene derivatives that yielded benzyl-substituted cyclopentane skeletons.     

Etude de la structure des oligomeres de l'isoprene desactives par les halogenures d'alcoyle

The deactivation of oligoisoprenyllithium RM_n^?, Li⁺ by an alkyl halide R′X yields two kinds of products: RM_nR′ and RM_nR; the microstructure of the isoprenic units in the oligomer is mainly 4,1 and 4,3 and it is determined by the addition to the active chain of an isoprene molecule or of the alkyl halide molecule. The microstructures of RM_nR′ and of RM_nR are different. The results indicate two kinds of halogen-lithium reactions leading to the products RM_nR: between the excess of initiator RLi and the alkyl halide or between oligoisoprenyllithium and the alkyl halide.     

Chemiluminescence kinetics in the reaction of alkyl halides withO_2^{\dot - }

A study has been made of the chemiluminescence (CL) in the reaction of generated by means of the KO₂-18-crown-6 system, with alkyl halides — propyl bromide, benzoyl chloride, and allyl chloride — in a medium of DMS and acetonitrile. It was found that the maximum intensity of CL and the kinetics of its decrease are dependent on the nature of the alkyl halide. A kinematic mechanism of the reaction is proposed. I. M. Litvinenko Institute of Physical Organic Chemistry and Carbon Chemistry, Academy of Sciences of Ukraine. Donetsk, 340114, ul. R. Luxemburg, 70. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 33, No. 4, pp. 229–233, July-August, 1997.     

MeOH or H2O as efficient additive to switch the reactivity of allylSmBr towards carbonyl compounds

A variety of carbonyl compounds were treated by allylSmBr (allylSmBr) with MeOH as the cosolvent to have further insights on the previously reported reductive coupling of aryl ketones mediated by Sm/alkyl halide/MeOH. The results demonstrate that the real reducing species in Sm/alkyl halide/MeOH system should be allylSmBr, and MeOH has elegantly switched the reactivity of allylSmBr from being nucleophilic to being good reductive coupling reagent. Besides, H₂O was also found to be a useful additive to realize the pinacol coupling of aliphatic aldehydes and ketones promoted by allylSmBr.     

Effects of Various Amounts of New Hepta-Ether as the Internal Donor on the Polymerization of Propylene with and without the External Donor

The new hepta-ether compound as the internal donor was synthesized using the Williamson reaction of dipentaerythritol with sodium hydride as the strong base and iodomethane as the alkyl halide. The hepta-ether compound was characterized by NMR, FTIR, and GC techniques. The MgCl₂-supported catalysts incorporated with different amounts of hepta-ether compound as the internal donor and without the internal donor were synthesized and characterized. The propylene polymerization was carried out using these catalysts in the presence of triethylaluminum as a co-catalyst and hydrogen as a chain transfer agent, with and without the external donor. The effect of a new internal donor on propylene polymerization using prepared MgCl₂-supported Ziegler-Natta catalysts was investigated.     

Fe‐catalyzed hydrohalogenative cyclization of cyclohexadienone‐containing enynes

A Fe‐catalyzed hydrohalogenative cyclization of cyclohexadienone‐containing 1,n‐enynes to give three different types of compounds is discussed. 1,6‐enynes with a stoichiometric amount of FeX₃ provided cis‐hydrobenzofurans with moderate stereoselectivity, whereas the reaction with TMSX (X = Cl, Br) as the halide source in the presence of Fe catalyst improved the stereoselectivity of halide addition highly. The alkyl vs aryl shows difference that the reaction of 1,6‐enynes bearing an alkylethynyl group gave meta alkenated phenols (2 examples) whereas a similar reaction of 1,6‐enynes with an arylethynyl group delivered only cis‐hydrobenzofurans (12 examples). 1,7‐enynes afforded tricyclic products (4 examples). The different reactivity of 1,6‐ and 1,7‐enynes is probably influenced by the formation of a six‐membered chair‐like intermediate in 1,6‐enynes.     

Preparation of di(n-butyl) tin and di(n-octyl) tin dihalides by the direct synthesis method

The direct synthesis of the two industrially important organotin intermediates, di(n-butyl)tin and di(n-octyl)tin dihalides, has been investigated by reacting the appropriate alkyl halide with metallic tin undervarying conditions. Observations were made on the influences of temperature, pressure, reaction time, nature of the tin metal, organic halide/tin reactant ratios and the presence of catalysts on the extent of tin conversion and yields of the organotin products. The efficacy of the onium halides, notably n-Bu₄NI, Me₃SI and Ph₃MeAsI, either singly or in binary combinations with iodine or inorganic iodine compounds, in catalysing the synthesis of the above dialkyltins as well as higher di(n-alkyl)tin analogues is described.     

Pd(OAc)2 promoted bis-N-heterocyclic carbene-catalyzed oxidative transformation of aldehydes

The bis-N-heterocyclic carbene-catalyzed (bis-NHC-catalyzed) oxidative transformation of aldehydes was successfully studied in water under air. The reaction rate increased through the use of Pd(OAc)₂ as an additive. Notably, the catalytic system exhibited good tolerance toward aliphatic and aromatic aldehydes bearing halide and alkyl functional groups. In addition, gram-scale reaction was also tested in this study. The use of water and operational simplicity make this methodology environmentally benign and cost-effective.