Transport in ordered and disordered porous media I: The cellular average and the use of weighting functions

In this work we consider transport in ordered and disordered porous media using singlephase flow in rigid porous mediaas an example. We defineorder anddisorder in terms of geometrical integrals that arise naturally in the method of volume averaging, and we show that dependent variables for ordered media must generally be defined in terms of thecellular average. The cellular average can be constructed by means of a weighting function, thus transport processes in both ordered and disordered media can be treated with a single theory based on weighted averages. Part I provides some basic ideas associated with ordered and disordered media, weighted averages, and the theory of distributions. In Part II a generalized averaging procedure is presented and in Part III the closure problem is developed and the theory is compared with experiment. Parts IV and V provide some geometrical results for computer generated porous media.Roman Letters A interfacial area of the- interface contained within the macroscopic region, m² - A_e area of entrances and exits for the-phase contained within the macroscopic system, m² - g gravity vector, m/s² - I unit tensor - K traditional Darcy's law permeability tensor, m² - L general characteristic length for volume averaged quantities, m - characteristic length (pore scale) for the-phase - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - N unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p0 reference pressure in the-phase, N/m² - p traditional intrinsic volume averaged pressure, N/m² - r0 radius of a spherical averaging volume, m - r position vector, m - r position vector locating points in the-phase, m - averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - v velocity vector in the-phase, m/s - v traditional superficial volume averaged velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V/V, volume average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m²     

On laminar flow through a uniformly porous pipe

Numerous investigations ([1] and [4–9]) have been made of laminar flow in a uniformly porous circular pipe with constant suction or injection applied at the wall. The object of this paper is to give a complete analysis of the numerical and theoretical solutions of this problem. It is shown that two solutions exist for all values of injection as well as the dual solutions for suction which had been noted by previous investigators. Analytical solutions are derived for large suction and injection; for large suction a viscous layer occurs at the wall while for large injection one solution has a viscous layer at the centre of the channel and the other has no viscous layer anywhere. Approximate analytic solutions are also given for small values of suction and injection.

Nomenclature

General r distance measured radially - z distance measured along axis of pipe - u velocity component in direction of z increasing - v velocity component in direction of r increasing - p pressure - density - coefficient of kinematic viscosity - a radius of pipe - V velocity of suction at the wall - r ²/a ² - R wall or suction Reynolds number, Va/ - f() similarity function defined in (6) - u ₀() eigensolution - U(0) a velocity at z=0 - K an arbitrary constant - B _K Bernoulli numbers Particular Section 5 perturbation parameter, –2/R - ² a constant, –K - x / - g(x) f()/ Section 6 perturbation parameter, –R/2 - ² a constant, –K - g() f() - g _c ()=g() near centre of pipe - * point where g()=0 Section 7 2/R - ² K - t (1–)/ - w(t, ) [1–f(t)]/ - ₀, ₁ constants - g() f()– ₀ - ₀/ - ₀ a constant - * point where f()=0     

Transport in ordered and disordered porous media II: Generalized volume averaging

In this paper we develop the averaged form of the Stokes equations in terms of weighting functions. The analysis clearly indicates at what point one must choose a media-specific weighting function in order to achieve spatially smoothed transport equations. The form of the weighting function that produces the cellular average is derived, and some important geometrical theorems are presented.Roman Letters A interfacial area of the- interface associated with the local closure problem, m² - A _e area of entrances and exits for the-phase contained within the averaging system, m² - A _p surface area of a particle, m² - d _p 6V _p/A_p, effective particle diameter, m - g gravity vector, m/s² - I unit tensor - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p general characteristic length for volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - l characteristic length (pore scale) for the-phase - l _i i=1, 2, 3 lattice vectors, m - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - m _D special convolution product weighting function for disordered media - m _M master convolution product weighting function for ordered and disordered media - n unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p_m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p p p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function, m - r position vector, m - r position vector locating points in the-phase, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - V velocity vector in the-phase, m/s - vm superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - V volume of the-phase contained in the averaging volume, m³ - V _p volume of a particle, m³ - v traditional superficial volume averaged velocity, m/s - v v p _m spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * . weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m² - V /V, volume fraction of the-phase     

The dynamic and steady shear properties of synovial fluid and of the components making up synovial fluid

Steady-shear and dynamic properties of a pooled sample of cattle synovial fluid have been measured using techniques developed for low viscosity fluids. The rheological properties of synovial fluid were found to exhibit typical viscoelastic behaviour and can be described by the Carreau type A rheological model. Typical model parameters for the fluid are given; these may be useful for the analysis of the complex flow problems of joint lubrication.The two major constituents, hyaluronic acid and proteins, have been successfully separated from the pooled sample of synovial fluid. The rheological properties of the hyaluronic acid and the recombined hyaluronic acid-protein solutions of both equal and half the concentration of the constituents found in the original synovial fluid have been measured. These properties, when compared to those of the original synovial fluid, show an undeniable contribution of proteins to the flow behaviour of synovial fluid in joints. The effect of protein was found to be more prominent in hyaluronic acid of half the normal concentration found in synovial fluid, thus providing a possible explanation for the differences in flow behaviour observed between synovial fluid from certain diseased joints compared to normal joint fluid.Nomenclature A Ratio of angular amplitude of torsion head to oscillation input signal - G Storage modulus - G Loss modulus - I Moment of inertia of upper platen — torsion head assembly - K Restoring constant of torsion bar - N ₁ First normal-stress difference - R Platen radius - S ⁽ⁱ⁾ Geometric factor in the dynamic property analysis - t ₁ Characteristic time parameter of the Carreau model - X, Y Carreau model parameters - Z () Reimann Zeta function of - Carreau model parameter - Shear rate - Apparent steady-shear viscosity - ^* Complex dynamic viscosity - Dynamic viscosity - Imaginary part of the complex dynamic viscosity - ₀ Zero-shear viscosity - ₀ Cone angle - Carreau model characteristic time - Density of fluid - Shear stress - Phase difference between torsion head and oscillation input signals - ₀ Zero-shear rate first normal-stress coefficient - Oscillatory frequency     

Flow through a helically coiled annulus

In this paper the flow is studied of an incompressible viscous fluid through a helically coiled annulus, the torsion of its centre line taken into account. It has been shown that the torsion affects the secondary flow and contributes to the azimuthal component of velocity around the centre line. The symmetry of the secondary flow streamlines in the absence of torsion, is destroyed in its presence. Some stream lines penetrate from the upper half to the lower half, and if is further increased, a complete circulation around the centre line is obtained at low values of for all Reynolds numbers for which the analysis of this paper is valid, being the ratio of the torsion of the centre line to its curvature.Nomenclature A =constant - a outer radius of the annulus - b unit binormal vector to C - C helical centre line of the pipe - D rL - g 1000 - K Dean number=Re² - L 1+r sin - M (L ²+ ² r ²)^1/2 - n unit normal vector to C - P, P pressure and nondimensional pressure - p ₀, p pressures of O(1) and O() - Re Reynolds number=aW ₀/ - (r, , s), (r, , s) coordinates and nondimensional coordinates - nonorthogonal unit vectors along the coordinate directions - r ₀ radius of the projection of C - t unit tangent vector to C - V _r, V , V _s velocity components along the nonorthogonal directions - V_r, V, V _s nondimensional velocity components along - W ₀ average velocity in a straight annulus Greek symbols , curvature and nondimensional curvature of C - U, V, W lowest order terms for small in the velocity components along the orthogonal directions t - _r, , _s first approximations to V _r , V, V _s for small - =/=/ - kinematic viscosity - density of the fluid - , torsion and nondimensional torsion of C - , stream function and nondimensional stream function - nondimensional streamfunction for U, V - a inner radius of the annulus After this paper was accepted for publication, a paper entitled On the low-Reynolds number flow in a helical pipe, by C.Y. Wang, has appeared in J. Fluid. Mech., Vol 108, 1981, pp. 185–194. The results in Wangs paper are particular cases of this paper for =0, and are also contained in [9].     

Mean and turbulent velocity measurements of supersonic mixing layers

The behavior of supersonic mixing layers under three conditions has been examined by schlieren photography and laser Doppler velocimetry. In the schlieren photographs, some large-scale, repetitive patterns were observed within the mixing layer; however, these structures do not appear to dominate the mixing layer character under the present flow conditions. It was found that higher levels of secondary freestream turbulence did not increase the peak turbulence intensity observed within the mixing layer, but slightly increased the growth rate. Higher levels of freestream turbulence also reduced the axial distance required for development of the mean velocity. At higher convective Mach numbers, the mixing layer growth rate was found to be smaller than that of an incompressible mixing layer at the same velocity and freestream density ratio. The increase in convective Mach number also caused a decrease in the turbulence intensity ( _u/U).List of symbols a speed of sound - b total mixing layer thickness between U ₁ – 0.1 U and U ₂ + 0.1 U - f normalized third moment of u-velocity, f u³/(U)³ - g normalized triple product of u² , g u²/(U)³ - h normalized triple product of u ², h u ²/(U)³ - l _u axial distance for similarity in the mean velocity - l _u axial distance for similarity in the turbulence intensity - M Mach number - M _c convective Mach number (for ₁ = ₂), M _c (U ₁ – U ₂)/(a ₁ + a ₂) - P static pressure - r freestream velocity ratio, r U ₂/U ₁ - Re unit Reynolds number, Re U/ - s freestream density ratio, s ₂/₁ - T _t total temperature - u instantaneous streamwise velocity - u deviation of u-velocity, uu – U - U local mean streamwise velocity - U ₁ primary freestream velocity - U ₂ secondary freestream velocity - average of freestream velocities, (U ₁ + U ₂)/2 - U freestream velocity difference, U U ₁ – U ₂ - instantaneous transverse velocity - v deviation of -velocity, – V - V local mean transverse velocity - x streamwise coordinate - y transverse coordinate - y ₀ transverse location of the mixing layer centerline - ensemble average - ratio of specific heats - boundary layer thickness (y-location at 99.5% of free-stream velocity) - similarity coordinate, (y – y ₀)/b - compressible boundary layer momentum thickness - viscosity - density - standard deviation - dimensionless velocity, (U – U ₂)/U - 1 primary stream - 2 secondary stream A version of this paper was presented at the 11th Symposium on Turbulence, October 17–19, 1988, University of Missouri-Rolla     

On the effect of magnetic field on viscous lifting and drainage of conducting fluid

This paper concerns with obtaining the solution of the problem of viscous lifting and drainage of a thin liquid film clinging to a vertical plane surface moving with a velocityf(t) in the presence of a transverse magnetic field. Specializing to the case when the surface moves with a constant acceleration, it has been found that the film thickness, for large magnetic fields, increases with the increase in magnetic field.Nomenclature a acceleration of the plate - A non-dimensional acceleration, =a/g - B magnetic induction vector - B ₀ applied magnetic field - f(t) any function oft - Laplace transform off(t) - g gravitational acceleration - h film thickness - H non-dimensional film thickness, =h(g/ ²)^1/3 - J current density vector - k (/)^1/2 B ₀ - M k( ²/g)^1/3 - n summation index - q mass flow rate - Q non-dimensional mass flow rate, =q/ - t time - T non-dimensional time, =t(g ²/)^1/3 - Laplace transform ofv(x, t) - V fluid velocity vector, =[0,v(x, t), 0] - (x, y, z) space coordinates - Y non-dimensionaly-coordinate, =y(g/ ²)^1/3 Greek symbols _n (n+1/2) - conductivity - density - kinematic viscosity     

Reservoir transport equations by compositional approach

The objective of this paper is to present an overview of the fundamental equations governing transport phenomena in compressible reservoirs. A general mathematical model is presented for important thermo-mechanical processes operative in a reservoir. Such a formulation includes equations governing multiphase fluid (gas-water-hydrocarbon) flow, energy transport, and reservoir skeleton deformation. The model allows phase changes due to gas solubility. Furthermore, Terzaghi's concept of effective stress and stress-strain relations are incorporated into the general model. The functional relations among various model parameters which cause the nonlinearity of the system of equations are explained within the context of reservoir engineering principles. Simplified equations and appropriate boundary conditions have also been presented for various cases. It has been demonstrated that various well-known equations such as Jacob, Terzaghi, Buckley-Leverett, Richards, solute transport, black-oil, and Biot equations are simplifications of the compositional model.Notation List B reservoir thickness - B formation volume factor of phase - Cⁱ mass of component i dissolved per total volume of solution - C ⁱ mass fraction of component i in phase - C heat capacity of phase at constant volume - C_p heat capacity of phase at constant pressure - D ⁱ hydrodynamic dispersion coefficient of component i in phase - D_MTf thermal liquid diffusivity for fluid f - F = F(x, y, z, t) defines the boundary surface - f_p fractional flow of phase - g gravitational acceleration - H_p enthalpy per unit mass of phase - J_p volumetric flux of phase - k_rf relative permeability to fluid f - k₀ absolute permeability of the medium - M_p ⁱ mass of component i in phase - n porosity - N rate of accretion - P_f pressure in fluid f - p_ca capillary pressure between phases and =p-p - Rⁱ rate of mass transfer of component i from phase to phase - Rⁱ _source source rate of component i within phase - S saturation of phase - s gas solubility - T temperature - t time - U displacement vector - u velocity in the x-direction - v velocity in the y-direction - V volume of phase - V_s velocity of soil solids - W_i body force in coordinate direction i - x horizontal coordinate - z vertical coordinate Greek Letters _p volumetric coefficient of compressibility - _T volumetric coefficient of thermal expansion - _ij Kronecker delta - volumetric strain - _m thermal conductivity of the whole matrix - internal energy per unit mass of phase - gf suction head - density of phase - _ij tensor of total stresses - _ij tensor of effective stresses - volumetric content of phase - f viscosity of fluid f     

Darcy-Forchheimer natural,forced and mixed convection heat transfer in non-Newtonian power-law fluid-saturated porous media

The governing equation for Darcy-Forchheimer flow of non-Newtonian inelastic power-law fluid through porous media has been derived from first principles. Using this equation, the problem of Darcy-Forchheimer natural, forced, and mixed convection within the porous media saturated with a power-law fluid has been solved using the approximate integral method. It is observed that a similarity solution exists specifically for only the case of an isothermal vertical flat plate embedded in the porous media. The results based on the approximate method, when compared with existing exact solutions show an agreement of within a maximum error bound of 2.5%.Nomenclature A cross-sectional area - b _i coefficient in the chosen temperature profile - B ₁ coefficient in the profile for the dimensionless boundary layer thickness - C coefficient in the modified Forchheimer term for power-law fluids - C ₁ coefficient in the Oseen approximation which depends essentially on pore geometry - C _i coefficient depending essentially on pore geometry - C _D drag coefficient - C _t coefficient in the expression forK ^* - d particle diameter (for irregular shaped particles, it is characteristic length for average-size particle) - f _p resistance or drag on a single particle - F _R total resistance to flow offered byN particles in the porous media - g acceleration due to gravity - g _x component of the acceleration due to gravity in thex-direction - Grashof number based on permeability for power-law fluids - K intrinsic permeability of the porous media - K ^* modified permeability of the porous media for flow of power-law fluids - l _c characteristic length - m exponent in the gravity field - n power-law index of the inelastic non-Newtonian fluid - N total number of particles - Nux,_D,F local Nusselt number for Darcy forced convection flow - Nux,_D-F,F local Nusselt number for Darcy-Forchheimer forced convection flow - Nux,_D,M local Nusselt number for Darcy mixed convection flow - Nux,_D-F,M local Nusselt number for Darcy-Forchheimer mixed convection flow - Nux,_D,N local Nusselt number for Darcy natural convection flow - Nux,_D-F,N local Nusselt number for Darcy-Forchheimer natural convection flow - pressure - p exponent in the wall temperature variation - _Pe c characteristic Péclet number - _Pe x local Péclet number for forced convection flow - _Pe x modified local Péclet number for mixed convection flow - _Ra c characteristic Rayleigh number - _Ra x local Rayleigh number for Darcy natural convection flow - _Ra x local Rayleigh number for Darcy-Forchheimer natural convection flow - Re convectional Reynolds number for power-law fluids - Reynolds number based on permeability for power-law fluids - T temperature - T _e ambient constant temperature - T w,_ref constant reference wall surface temperature - T _w(X) variable wall surface temperature - T _w temperature difference equal toT w,_ref–T _e - T ₁ term in the Darcy-Forchheimer natural convection regime for Newtonian fluids - T ₂ term in the Darcy-Forchheimer natural convection regime for non-Newtonian fluids (first approximation) - T _N term in the Darcy/Forchheimer natural convection regime for non-Newtonian fluids (second approximation) - u Darcian or superficial velocity - u ₁ dimensionless velocity profile - u _e external forced convection flow velocity - u _s seepage velocity (local average velocity of flow around the particle) - u _w wall slip velocity - U c _M characteristic velocity for mixed convection - U c _N characteristic velocity for natural convection - x, y boundary-layer coordinates - x ₁,y ₁ dimensionless boundary layer coordinates - X coefficient which is a function of flow behaviour indexn for power-law fluids - effective thermal diffusivity of the porous medium - shape factor which takes a value of/4 for spheres - shape factor which takes a value of/6 for spheres - ₀ expansion coefficient of the fluid - _T boundary-layer thickness - T ₁ dimensionless boundary layer thickness - porosity of the medium - similarity variable - dimensionless temperature difference - coefficient which is a function of the geometry of the porous media (it takes a value of 3 for a single sphere in an infinite fluid) - ₀ viscosity of Newtonian fluid - ^* fluid consistency of the inelastic non-Newtonian power-law fluid - constant equal toX(2 ^2–n )/ - density of the fluid - dimensionless wall temperature difference     

Simultaneous measurements of velocity and temperature fluctuations in thermal boundary layer in a drag-reducing surfactant solution flow

The mechanism of turbulent heat transfer in the thermal boundary layer developing in the channel flow of a drag-reducing surfactant solution was studied experimentally. A two-component laser Doppler velocimetry and a fine-wire thermocouple probe were used to measure the velocity and temperature fluctuations simultaneously. Two layers of thermal field were found: a high heat resistance layer with a high temperature gradient, and a layer with a small or even zero temperature gradient. The peak value of was larger for the flow with the drag-reducing additives than for the Newtonian flow, and the peak location was away from the wall. The profile of was depressed in a similar manner to the depression of the profile of in the flow of the surfactant solution, i.e., decorrelation between v and compared with decorrelation between u and v. The depression of the Reynolds shear stress resulted in drag reduction; similarly, it was conjectured that the heat transfer reduction is due to the decrease in the turbulent heat flux in the wall-normal direction for a flow with drag-reducing surfactant additives.List of symbols ensemble averaged value - (·)⁺ normalized by the inner wall variables - (·) root-mean-square value - C concentration of cetyltrimethyl ammonium chloride (CTAC) solution - c _p heat capacity - D hydraulic diameter - f friction factor - H channel height - h heat transfer coefficient - j _H Colburn factor - l length - Nu Nusselt number, h - Pr Prandtl number, c _p/ - q _w wall heated flux - Re Reynolds number, U _b/ - T temperature - T _b bulk temperature - T _i inlet temperature - T _w wall temperature - T friction temperature, q _w /c _p u - U local time-mean streamwise velocity - U ₁ velocity signals from BSA1 - U ₂ velocity signals from BSA2 - U _b bulk velocity - u streamwise velocity fluctuation - u1 velocity in abscissa direction in transformed coordinates - u friction velocity, - v wall-normal velocity fluctuation - v1 velocity in ordinate direction in transformed coordinates - var(·) variance - x streamwise direction - y wall-normal direction - z spanwise direction - _j junction diameter of fine-wire TC - _w wire diameter of fine-wire TC - angle of principal axis of joint probability function p(u,v) - _f heat conduction of fluid - _w heat conduction of wire of fine-wire TC - kinematic viscosity - local time-mean temperature difference, T _w –T - temperature fluctuation - standard deviation - density - _w wall shear stress     

Injection moulding of thermoplastics: Freezing of variable-viscosity fluids.

The injection moulding of thermoplastics involves, during mould filling, flows of hot polymer melts into mould networks, the walls of which are so cold that frozen layers form on them. An analytical study of such flows is presented here for the case when the Graetz and Nahme numbers are large and the Pearson number is small. Thus the flows are developing and temperature differences due to heat generation by viscous dissipation are sufficiently large to cause significant variations in viscosity (but the difference between the entry temperature of the polymer to a specific part of the mould network and the melting temperature of the polymer is not). Br Brinkman number - Gz Graetz number - h half-height of channel or disc - h ^* half-height of polymer melt region in channel or disc - L length of channel or pipe - m viscosity shear-rate exponent - Na Nahme number - p pressure - P pressure drop - Pe Péclet number - Pn Pearson number - Q volumetric flowrate - r radial coordinate in pipe or disc - R radius of pipe - Re Reynolds number - R _i inner radius of disc - R _o outer radius of disc - R ^* radius of polymer melt region in pipe - T temperature - T _ad adiabatic temperature rise - T _e entry polymer melt temperature - T _m melting temperature of polymer - T _max maximum temperature - T ₀ reference temperature - T _w wall temperature - flow-average temperature rise - u _r radial velocity in pipe or disc - u _x axial velocity in channel - u _y transverse velocity in channel or disc - u _z axial velocity in pipe - w width of channel - x axial coordinate in channel or modified radial coordinate in disc - y transverse coordinate in channel or disc - z axial coordinate in pipe - thermal conductivity of molten polymer - thermal conductivity of frozen polymer - scaled dimensionless axial coordinate in channel or pipe or radial coordinate in disc - ₀ undetermined integration constant - heat capacity of molten polymer - viscosity temperature exponent - dimensionless transverse coordinate in channel or disc - ^* dimensionless half-height of polymer melt region in channel or disc - H ^* scaled dimensionless half-height of polymer melt region in channel or disc or radius of polymer melt region in pipe - dimensionless temperature - ^* dimensionless wall temperature - scaled dimensionless temperature - numerical constant - µ viscosity of molten polymer - µ ₀ consistency of molten polymer - dimensionless pressure gradient - scaled dimensionless pressure gradient - density of molten polymer - dimensionless radial coordinate in pipe or disc - _i dimensionless inner radius of disc - ^* dimensionless radius of polymer melt region in pipe - dimensionless streamfunction - scaled dimensionless streamfunction - dummy variable - streamfunction - similarity variable - similarity variable     

Normal forms for random diffeomorphisms

Given a dynamical system (,, ,) and a random diffeomorphism (): ^{d d} with fixed point at x=0. The normal form problem is to construct a smooth near-identity nonlinear random coordinate transformation h() to make the random diffeomorphism ()=h()^–1() h() as simple as possible, preferably linear. The linearization D(, 0)=:A() generates a matrix cocycle for which the multiplicative ergodic theorem holds, providing us with stochastic analogues of eigenvalues (Lyapunov exponents) and eigenspaces. Now the development runs pretty much parallel to the deterministic one, the difference being that the appearance of turns all problems into infinite-dimensional ones. In particular, the range of the homological operator is in general not closed, making the conceptof-normal form necessary. The stochastic versions of resonance and averaging are developed. The case of simple Lyapunov spectrum is treated in detail.     

Squeezing flows of Newtonian liquid films an analysis including fluid inertia

A theoretical study is made of the flow behavior of thin Newtonian liquid films being squeezed between two flat plates. Solutions to the problem are obtained by using a numerical method, which is found to be stable for all Reynolds numbers, aspect ratios, and grid sizes tested. Particular emphasis is placed on including in the analysis the inertial terms in the Navier-Stokes equations.Comparison of results from the numerical calculation with those from Ishizawa's perturbation solution is made. For the conditions considered here, it is found that the perturbation series is divergent, and that in general one must use a numerical technique to solve this problem.Nomenclature a half of the distance, or gap, between the two plates - a ₀ the value of a at time t=0 - adot da/dt - ä d² a/dt ² - d³ a/dt ³ - a ⁱ components of a contravariant acceleration vector - f unknown function of z ₀ and t defined in (6) - f ⁱ function defined in (9) f ¹=r ₀ g(z ₀, t) f ²= ₀ f ³=f(z ₀, t) - F force applied to the plates - g unknown function of z ₀ and t defined in (6) - g g/z ₀ - h grid dimension in the z ₀ direction (see Fig. 5) - Christoffel symbol - i, j, k, l indices - k grid dimension in the t direction (see Fig. 5) - r radial coordinate direction defined in Fig. 1 - r ₀ radial convected coordinate - R radius of the circular plates - t time - v _r fluid velocity in the r direction - v _z fluid velocity in the z direction - v fluid velocity in the direction - x ⁱ cylindrical coordinate x ¹=r x²= x³=z - z vertical coordinate direction defined in Fig. 1 - z ₀ vertical convected coordinate - tangential coordinate direction - ₀ tangential convected coordinate - viscosity - kinematic viscosity, / - ⁱ convected coordinate ¹=r₀ ²=₀ ³=z₀ - density     

Rheological properties of reactive polymer melts.

A new method for describing the rheological properties of reactive polymer melts, which was presented in an earlier paper, is developed in more detail. In particular, a detailed derivation of the equation of a first-order rheometrical flow surface is given and a procedure for determining parameters and functions occurring in this equation is proposed. The experimental verification of the presented approach was carried out using our data for polyamide-6.Notation E Dimensionless reduced viscosity, eq. (34) - E ₀ Newtonian asymptote of the function (36) - E power-law asymptote of the function (36) - E _{= 1} the value ofE at = 1 - k degradation reaction rate constant, s^–1 - k ₁ rate constant of function (t), eq. (26), s^–1 - k ₂ rate constant of function (t), eq. (29), s^–1 - K(t) residence-time-dependent consistency factor, eq. (22) - M _w weight-average molecular weight - M _x x-th moment of the molecular weight distribution - R gas constant - S _x M _x /M _w - t residence time in molten state, s - t _j thej-th value oft, s - T temperature, K - % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xd9vqpe0x% c9q8qqaqFn0dXdir-xcvk9pIe9q8qqaq-xir-f0-yqaqVeLsFr0-vr% 0-vr0db8meaabaqaciGacaGaaeqabaWaaeaaeaaakeaaieGaceWFZo% Gbaiaaaaa!3B4E!\[\dot \gamma \] shear rate, s^–1 - _i thei-th value of , s^–1 - _r =1 the value of at = 1, s^–1 - ^* reduced shear rate, eq. (44), s^–1 - dimensionless reduced shear rate, eq. (35) - viscosity, Pa · s - shear-rate and residence-time dependent viscosity, Pa · s - zero-shear-rate degradation curve - degradation curve at - _{t0 (t)} zero-residence-time flow curve - Newtonian asymptote of the RFS - instantaneous flow curve - power-law asymptote of the RFS - _0,0 zero-shear-rate and zero-residence-time viscosity, Pa · s - _E=1 value of viscosity atE=1, Pa · s - ^* reduced viscosity, eq. (43), Pa · s - zero-residence-time rheological time constant, s - density, kg/m³ - (t),(t) residence time functions     

Shear viscosity behavior of highly concentrated suspensions at low and high shear-rates

A method is proposed for determining the shear viscosity behavior of highly concentrated suspensions at low and high shear-rates through the use of a formulation that is a function of three parameters signifying the effects of particle size distribution. These parameters are the intrinsic viscosity [], a parametern that reflects the level of particle association at the initiation of motion and the maximum packing concentration _m. The formulation reduces to the modified Eilers equation withn = 2 for high shear rates. An analytical method was used for the calculation of maximum packing concentration which was subsequently correlated with the experimental values to account for the surface induced interaction of particles with the fluid. The calculated values of viscosities at low and high shear-rates were found to be in good agreement with various experimental data reported in literature. A brief discussion is also offered on the reliability of the methods of measuring the maximum packing concentration. _r = /₀ relative viscosity of the suspension - volumetric concentration of solids - k _n coefficient which characterizes a specific effect of particle interactions - _m maximum packing concentration - _r,0 relative viscosity at low shear-rates - [] intrinsic viscosity - n, n parameter that reflects the level of particle interactions at low and high shear-rates, respectively - _r, relative viscosity at high shear-rates - (_m)_s, (_m)_i, (_m)_l packing factors for small, intermediate and large diameter classes - v _s, v_i, v_l volume fractions of small, intermediate and large diameter classes, respectively - _si, _sl coefficient to be used in relating a smaller to an intermediate and larger particle group, respectively - _is, _il coefficient to be used in relating an intermediate to a smaller and larger particle group, respectively - _ls, _li coefficient to be used in relating a larger to a smaller and intermediate particle group, respectively - _m0 maximum packing concentration for binary mixtures - _m,e measured maximum packing concentration - _m,c calculated maximum packing concentration     

The virtual origin of riblets in an open channel flow

In this paper, a method using the mean velocity profiles for the buffer layer was developed for the estimation of the virtual origin over a riblets surface in an open channel flow. First, the standardized profiles of the mixing length were estimated from the velocity measurement in the inner layer, and the location of the edge of the viscous layer was obtained. Then, the virtual origins were estimated by the best match between the measured velocity profile and the equations of the velocity profile derived from the mixing length profiles. It was made clear that the virtual origin and the thickness of the viscous layer are the function of the roughness Reynolds number. The drag variation coincided well with other results.Nomenclature f _r skin friction coefficient - f _ro skin friction coefficient in smooth channel at the same flow quantity and the same energy slope - g gravity acceleration - H water depth from virtual origin to water surface - H ⁺ u*H/ - H false water depth from top of riblets to water surface - H ⁺ u*H/ - I _e streamwise energy slope - I _b bed slope - k riblet height - k ⁺ u*k/ - l mixing length - l _s standardized mixing length - Q flow quantity - Re Reynolds number volume flow/unit width/v - s riblet spacing - u mean velocity - u* friction velocity = - u* false friction velocity = - y distance from virtual origin - y distance from top of riblet - y ₀ distance from top of riblet to virtual origin - y _v distance from top of riblet to edge of viscous layer - y ⁺ u*y/ - y ⁺ u*y/ - y ₀ ⁺ u*y ₀/ - u ⁺ u*y/ - shifting coefficient for standardization - thickness of viscous layer=y ₀+y - ⁺ u*/ - ⁺ u*/ - eddy viscosity - ridge angle - v kinematic viscosity - density - shear stress     

On an inversion theorem for conical regions in elasticity theory

Summary Two-dimensional stress singularities in wedges have already drawn attention since a long time. An inverse square-root stress singularity (in a 360° wedge) plays an important role in fracture mechanics.Recently some similar three-dimensional singularities in conical regions have been investigated, from which one may be also important in fracture mechanics.Spherical coordinates are r, , . The conical region occupied by the elastic homogeneous body (and possible anisotropic) has its vertex at r=0. The mantle of the cone is described by an arbitrary function f(, )=0. The displacement components be u. For special values of (eigenvalues) there exist states of displacements (eigenstates) % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqef0uAJj3BZ9Mz0bYu% H52CGmvzYLMzaerbd9wDYLwzYbItLDharqqr1ngBPrgifHhDYfgasa% acOqpw0xe9v8qqaqFD0xXdHaVhbbf9v8qqaqFr0xc9pk0xbba9q8Wq% Ffea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8frFve9Fve9Ff0dme% GabaqaaiGacaGaamqadaabaeaafiaakabbaaa6daaahjxzL5gapeqa% aiaadwhadaWgaaWcbaGaeqOVdGhabeaakiabg2da9iaadkhadaahaa% WcbeqaaiabeU7aSbaakiaadAgadaWgaaWcbaGaeqOVdGhabeaakiaa% cIcacqaH7oaBcaGGSaGaeqiUdeNaaiilaiabfA6agjaacMcaaaa!582B!\[u_\xi = r^\lambda f_\xi (\lambda ,\theta ,\Phi )\],which may satisfy rather arbitrary homogeneous boundary conditions along the generators.The paper brings a theorem which expresses that if is an eigenvalue, then also-1- is an eigenvalue. Though the theorem is related to a known theorem in Potential Theory (Kelvin's theorem), the proof has to be given along quite another line.

---

Zusammenfassung Zwei-dimensionale Spannungssingularitäten in keilförmigen Gebieten sind schon längere Zeit untersucht worden und neuerdings auch ähnliche drei-dimensionale Singularitäten in konischen Gebieten.Kugelkoordinaten sind r, , . Das konische Gebiet hat seine Spitze in r=0. Der Mantel des Kegels lässt sich beschreiben mittels einer willkürlichen Funktion f(, )=0. Die Verschiebungskomponenten seien u. Für spezielle Werte von (Eigenwerte) bestehen Verschiebunszustände % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqef0uAJj3BZ9Mz0bYu% H52CGmvzYLMzaerbd9wDYLwzYbItLDharqqr1ngBPrgifHhDYfgasa% acOqpw0xe9v8qqaqFD0xXdHaVhbbf9v8qqaqFr0xc9pk0xbba9q8Wq% Ffea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8frFve9Fve9Ff0dme% GabaqaaiGacaGaamqadaabaeaafiaakabbaaa6daaahjxzL5gapeqa% aiaadwhadaWgaaWcbaGaeqOVdGhabeaakiabg2da9iaadkhadaahaa% WcbeqaaiabeU7aSbaakiaadAgadaWgaaWcbaGaeqOVdGhabeaakiaa% cIcacqaH7oaBcaGGSaGaeqiUdeNaaiilaiabfA6agjaacMcaaaa!582B!\[u_\xi = r^\lambda f_\xi (\lambda ,\theta ,\Phi )\],welche homogene Randwerte der Beschreibenden des Kegels entlang genügen.Das Bericht bringt ein Theorem, welches aussagt, das und =–1– beide Eigenwerte sind.

     

Evaluation of the dynamic-mechanical properties of solids from a cooperative model for stress relaxation

For many solid materials the stress relaxation process obeys the universal relationF = – (d/d lnt)_max = (0.1 ± 0.01) ( ₀ — _i ), regardless of the structure of the material. Here denotes the stress,t the time, ₀ the initial stress of the experiment and _i the internal stress. A cooperative model accounting for the similarity in relaxation behaviour between different materials was developed earlier. Since this model has a spectral character, the concepts of linear viscoelasticity are used here to evaluate the corresponding prediction of the dynamic mechanical properties, i.e. the frequency dependence of the storageE () and lossE () moduli. Useful numerical approximations ofE () andE () are also evaluated. It is noted that the universal relation in stress relaxation had a counterpart in the frequency dependence ofE (). The theoretical prediction of the loss factor for high-density polyethylene is compared with experimental results. The agreement is good.     

Peristaltic pumping of a second-order fluid in a planar channel

The peristaltic motion of a non-Newtonian fluid represented by the constitutive equation for a second-order fluid was studied for the case of a planar channel with harmonically undulating extensible walls. A perturbation series for the parameter ( half-width of channel/wave length) obtained explicit terms of 0(²), 0(²Re²) and 0(₁Re²) respectively representing curvature, inertia and the non-Newtonian character of the fluid. Numerical computations were performed and compared to the perturbation analysis in order to determine the range of validity of the terms.Presented at the second conference Recent Developments in Structured Continua, May 23–25, 1990, in Sherbrooke, Québec, Canada     

An analogue study for flame flickering

An analogue experiment is proposed to simulate flame flickering comprising a free ascending column fed on its side with a light gas (helium) emerging from a vertical slot in ambient air. The convective motion of the helium jet is considered to represent the motion of burnt gases of buoyant jet flames. The helium jet is accelerated by buoyancy effects and the flow field is similar to that of burnt gases observed for real buoyant flames. The vertical velocity profile of the steady helium jet is measured at different vertical distances. The unsteady helium jet is also studied by measuring the instability frequency as a function of ambient pressure at different injection flow rates, and by analyzing the tomography images of the helium jet. The instability morphology is the same as that observed on real buoyant flames. We conclude that this type of instability can be approximately characterized by the maximum vertical velocityu _max, and the distance betweenu _max in the helium ascending column andu = o in the ambient air. For this type of instability the local vorticity is proportional to which can be influenced by gravity and ambient pressure. Theoretical prediction of the instability frequency as a function of gravity and ambient pressure has been obtained, and is in good agreement with the experimental results.List of symbols C ₁,C ₂ constants - F instability frequency - F _c critical frequency - F _m the most amplified frequency - F (K, ) function defined in (11) - g gravitational acceleration - g reduced gravity acceleration g(₀-^*)/^* - k real wave number of the disturbance - K reduced wave numberK=2k - K _c reduced wave number of the critical instability mode - K _m nondimensional wavenumber of the most amplified mode - L vertical characteristic length (in x direction) - P ambient pressure - u local vertical buoyant velocity (inx direction) - u _max local maximum vertical velocity - v local velocity component iny direction (horizontal) - V ₀ injection velocity of helium (iny direction) - x vertical distance measured from the leading edge of boundary layer - y horizontal distance measured from the exit plane of the vertical slot - Z(K, ) function defined in equation (11) Greek symbols distance betweenu _max in the helium ascending column andu = o in the ambient air - - wavelength of instability - _c critical wavelength - _m the most amplified wavelength - ^* helium density at slot exit - ₀ ambient air density - ^* helium dynamic viscosity at slot exit - v ^* helium kinematic viscosity at slot exit - complex number presented in disturbancee ^i(kx+t) - _i imaginary part of , representing the amplification rate of disturbance - _r real part of , where ( _r /k) represents the group velocity - reduced complex number of , defined