Electro-dry-adhesion

This work presents novel conductive bioinspired dry adhesives with mushroom caps that enable the use of a synergistic combination of electrostatic and van der Waals forces (electro-dry-adhesion). An increase in shear adhesion bond strength of up to 2046% on a wide range of materials is measured when a maximum electrical field of 36.4 V μm(-1) is applied. A suction effect, due to the shape of the dry adhesive fibers, on overall adhesion was not noted for electro-dry-adhesives when testing was performed at both atmospheric and reduced pressure. Utilization of electrostatics to apply a preloading force to dry adhesive fiber arrays allows increased adhesion even after electrostatic force generation has been halted by ensuring the close contact necessary for van der Waals forces to be effective. A comparison is made between self-preloading of the electro-dry-adhesives and the direct application of a normal preloading pressure resulting in nearly the same shear bond strength with an applied voltage of 3.33 kV on the same sample.     

A modeling approach to describe the adhesion of rough, asymmetric particles to surfaces

A combined theoretical and experimental study of the adhesion of alumina particles and polystyrene latex spheres to silicon dioxide surfaces was performed. A boundary element technique was used to model electrostatic interactions between micron-scale particles and planar surfaces when the particles and surfaces were in contact. This method allows quantitative evaluation of the effects of particle geometry and surface roughness on the electrostatic interaction. The electrostatic interactions are combined with a previously developed model for van der Waals forces in particle adhesion. The combined model accounts for the effects of particle and substrate geometry, surface roughness and asperity deformation on the adhesion force. Predictions from the combined model are compared with experimental measurements made with an atomic force microscope. Measurements are made in aqueous solutions of varying ionic strength and solution pH. While van der Waals forces are generally dominant when particles are in contact with surfaces, results obtained here indicate that electrostatic interactions contribute to the overall adhesion force in certain cases. Specifically, alumina particles with complex geometries were found to adhere to surfaces due to both electrostatic and van der Waals interactions, while polystyrene latex spheres were not affected by electrostatic forces when in contact with various surfaces.     

Specific and nonspecific interaction forces between Escherichia coli and silicon nitride, determined by poisson statistical analysis

The nature of the physical interactions between Escherichia coli JM109 and a model surface (silicon nitride) was investigated in water via atomic force microscopy (AFM). AFM force measurements on bacteria can represent the combined effects of van der Waals and electrostatic forces, hydrogen bonding, steric interactions, and perhaps ligand-receptor type bonds. It can be difficult to decouple these forces into their individual components since both specific (chemical or short-range forces such as hydrogen bonding) and nonspecific (long-range colloidal) forces may be present in the overall profiles. An analysis is presented based on the application of Poisson statistics to AFM adhesion data, to decouple the specific and nonspecific interactions. Comparisons with classical DLVO theory and a modified form of a van der Waals expression for rough surfaces were made in order to help explain the nature of the interactions. The only specific forces in the system were due to hydrogen bonding, which from the Poisson analysis were found to be -0.125 nN. The nonspecific forces of 0.155 nN represent an overall repulsive interaction. These nonspecific forces are comparable to the forces calculated from DLVO theory, in which electrostatic-double layer interactions are added to van der Waals attractions calculated at the distance of closest approach, as long as the van der Waals model for "rough" spherical surfaces is used. Calculated electrostatic-double layer and van der Waals interactions summed to 0.116 nN. In contrast, if the classic (i.e., smooth) sphere-sphere model was used to predict the van der Waals forces, the sum of electrostatic and van der Waals forces was -7.11 nN, which appears to be a large overprediction. The Poisson statistical analysis of adhesion forces may be very useful in applications of bacterial adhesion, because it represents an easy way to determine the magnitude of hydrogen bonding in a given system and it allows the fundamental forces to be easily broken into their components.     

Superlubricity using repulsive van der Waals forces

Using colloid probe atomic force microscopy, we show that if repulsive van der Waals forces exist between two surfaces prior to their contact then friction is essentially precluded and supersliding is achieved. The friction measurements presented here are of the same order as the lowest ever recorded friction coefficients in liquid, though they are achieved by a completely different approach. A gold sphere attached to an AFM cantilever is forced to interact with a smooth Teflon surface (templated on mica). In cyclohexane, a repulsive van der Waals force is observed that diverges at short separations. The friction coefficient associated with this system is on the order of 0.0003. When the refractive index of the liquid is changed, the force can be tuned from repulsive to attractive and adhesive. The friction coefficient increases as the Hamaker constant becomes more positive and the divergent repulsive force, which prevents solid-solid contact, gets switched off.     

Forces and friction between hydrophilic and hydrophobic surfaces: influence of oleate species

The atomic force microscope has been used to investigate normal surface forces and lateral friction forces at different concentrations of sodium oleate, a frequently used fatty acid in the deinking process. The measurements have been performed using the colloidal probe technique with bead materials consisting of cellulose and silica. Cellulose was used together with a printing ink alkyd resin and mica, whereas silica was used with a hydrophobized silica wafer. The cellulose-alkyd resin system showed stronger double layer repulsion and the friction was reduced with increasing surfactant concentration. The adhesive interaction disappeared immediately on addition of sodium oleate. The normal surface forces for cellulose-mica indicated no apparent adsorption of the sodium oleate however, the friction coefficient increased on addition of sodium oleate, which we ascribe to some limited adsorption increasing the effective surface roughness. The silica-hydrophobic silica system showed a completely different surface force behavior at the different concentrations. An attractive hydrophobic interaction was evident since the surfaces jumped into adhesive contact at a longer distance than the van der Waals forces would predict. The strong adhesion was reflected in the friction forces as a nonlinear relationship between load and friction and a large friction response at zero applied load. Indirect evidence of adsorption to the hydrophilic silica surface was also observed in this case, and QCM studies were performed to confirm the adsorption of material to both surfaces.     

Controlling adhesion force by means of nanoscale surface roughness

Control of adhesion is a crucial aspect in the design of microelectromechanical and nanoelectromechanical devices. To understand the dependence of adhesion on nanometer-scale surface roughness, a roughness gradient has been employed. Monomodal roughness gradients were fabricated by means of silica nanoparticles (diameter ～12 nm) to produce substrates with varying nanoparticle density. Pull-off force measurements on the gradients were performed using (polyethylene) colloidal-probe microscopy under perfluorodecalin, in order to restrict interactions to van der Waals forces. The influence of normal load on pull-off forces was studied and the measured forces compared with existing Hamaker-approximation-based models. We observe that adhesion force reaches a minimum value at an optimum particle density on the gradient sample, where the mean particle spacing becomes comparable with the diameter of the contact area with the polyethylene sphere. We also observe that the effect on adhesion of increasing the normal load depends on the roughness of the surface.     

Effects of adsorbed water layer structure on adhesion force of silicon oxide nanoasperity contact in humid ambient

The origin of the large relative-humidity (RH) dependence of the adhesion force in the single-asperity contact between silicon oxide surfaces is elucidated. As RH increases, the adhesion force measured with an atomic force microscopy (AFM) initially increases, reaches a maximum, and then decreases at high RH. The capillary force alone cannot explain the observed magnitude of the RH dependence. The origin of the large RH dependence is due to the presence of an icelike structured water adsorbed at the silicon oxide surface at room temperature. A solid-adsorbate-solid model is developed calculating the contributions from capillary forces, van der Waals interactions, and the rupture of an ice-ice bridge at the center of the contact region. This model illustrates how the structure, thickness, and viscoelastic behavior of the adsorbed water layer influence the adhesion force of the silicon oxide nanoasperity contact.     

Origin of adhesion in humid air

The origin of adhesion in humid air is investigated by pull-off force measurements between nanoscale contacts using atomic force microscopes in controlled environments from ultrahigh vacuum through various humidity conditions to water. An equivalent work of adhesion (WOA) model with a simplified interface stress distribution is developed, combining the effects of screened van der Waals and meniscus forces, which describes adhesion in humid air and which self-consistently treats the contact stress and deformation. Although the pull-off force is found to vary significantly with humidity, the equivalent WOA is found to be invariant. Increasing humidity alters the nature of the surface adhesion from a compliant contact with a localized, intense meniscus force to a stiff contact with an extended, weak meniscus force.     

An Effective Zeta Potential Fitting Model for Sphere-Plate Interaction Force in Nanoparticle Suspensions

The silica sphere-plate interaction forces in zirconia nanoparticle suspensions have been successfully measured to explain how negligibly charged silica microspheres can be stabilized through the addition of highly charged zirconia nanoparticles. However, the influence of nanoparticle volume fraction on the stabilization as well as how various forces (the attractive van der Waals force, repulsive electrostatic force, and depletion force) contribute to the total interaction force still remains unclear. Therefore, an effective zeta potential fitting model is developed to explain the experimental interaction force curves based on a variable effective Debye length and a measured effective zeta potential using a continuum assumption.     

Effect of contact deformations on the adhesion of particles

A strict theory of reciprocal influence of the contact deformation and molecular attraction of a ball and a plane has been developed. It has been shown that despite the van der Waals' forces being capable of increasing the elastic contact area between the ball and the plane, the force that is required to overcome the molecular forces arising when the contact is broken does not increase thereby. In fact, it remains equal to the attraction force value that is determined when considering the point contact of a nondeformed ball with a plane.

In the absence of the electrostatic component, the adhesion force is equivalent to the first power of the ball radius and to the amount of work per unit area as required for affecting the equilibrium tearing-off of a flat surface of the same nature.     

Simple model for DNA adsorption onto a mica surface in 1:1 and 2:1 electrolyte solutions

We propose a simple theory of interactions between like-charged polyelectrolyte and a surface based on a mean-field Derjaguin-Landau-Verwey-Overbeek approach. It predicts that the van der Waals attractive interactions are responsible for irreversible physisorption of polyelectrolytes onto charged surfaces. We show that monovalent salts contribute significantly to repulsive interactions, while enhancing the attraction very slightly. The effect of the divalent counterions is reverse. Therefore, to achieve the adsorption, the overall repulsion due to 1:1 electrolyte should be counterbalanced by the stronger van der Waals attraction due to the presence of doubly charged counterions in solution. The theory has been validated experimentally against its ability to predict the minimum polymer/surface interaction energy required for the adsorption using DNA/mica in NaCl, MgCl2, and NiCl2 solutions as a test system. The theory explains the mechanism of linear DNA adsorption to a mica surface for different solvent compositions and can be used as a tool for predicting the optimum conditions for AFM experiments on linear polymer systems. The model can also be used to make general conclusions on the conformation of polymer molecules on a surface. We have shown for the DNA/mica surface system that when the adsorption of DNA is mostly governed by long-range van der Waals forces the molecule adopts an ideal 2D conformation. When the adsorption is mostly due to short-range ion-correlation forces, DNA will appear 3D --> 2D projected in agreement with experimental data.     

Adhesion between Nanoscale Rough Surfaces

In this investigation, the adhesion between particles and plates with root-mean-square, rms, surface roughness of 0.17-10.5 nm was measured by atomic force microscopy. Measurements obtained with particles both larger and smaller than the surface asperities are presented. Results indicate adhesion force decreases sharply with increasing surface roughness in the nanometer scale (<2 nm), followed by a gradual and slow decrease with further increase in roughness. Existing models were found to significantly underestimate adhesion force. Hence, a new model based on a geometry that considers both the height and breadth of asperities yielding an increased asperity radius compared to previous approaches, as detailed in Part I of this series, is applied using both van der Waals and elastic deformation/work of adhesion based approaches. For the system studied in this investigation, the adhesion forces predicted by the proposed model are considerably more accurate than those predicted by past models. Copyright 2000 Academic Press.     

Force measurements between Teflon AF and colloidal silica particles in electrolyte solutions

The interaction force between a very hydrophobic polymer surface and colloidal silica particles with a roughness of 10–15 nm has been measured in aqueous solutions of KOH and KCl using an atomic force microscope. The interaction can be described according to the DLVO theory by an electrical double-layer force that is repulsive at long distances and attractive at short distances and an attractive van der Waals force. The electrical double-layer potentials are compared to the zeta potentials of Teflon AF and the silica spheres. The roughness of the silica particles leads to an underestimation of the short-range attraction and the surface potential. Both KCl and KOH solutions affect the potential of the interacting surfaces. OH⁻ ions that adsorb preferentially to the Teflon AF surface create higher potentials than Cl⁻ ions. Range and strength of the attractive interaction are not affected by KCl solutions but reduced by addition of KOH. This can be explained by decreasing potential differences between the silica sphere and Teflon AF with increasing KOH concentration. In addition, the preferential adsorption of OH⁻ ions may lead to a reduction of the van der Waals interaction. The presence of nanobubbles, too, might play a role.     

Ionic liquid nanotribology: stiction suppression and surface induced shear thinning

The friction and adhesion between pairs of materials (silica, alumina, and polytetrafluoroethylene) have been studied and interpreted in terms of the long-ranged interactions present. In ambient laboratory air, the interactions are dominated by van der Waals attraction and strong adhesion leading to significant frictional forces. In the presence of the ionic liquid (IL) ethylammonium nitrate (EAN) the van der Waals interaction is suppressed and the attractive/adhesive interactions which lead to "stiction" are removed, resulting in an at least a 10-fold reduction in the friction force at large applied loads. The friction coefficient for each system was determined; coefficients obtained in air were significantly larger than those obtained in the presence of EAN (which ranged between 0.1 and 0.25), and variation in the friction coefficients between systems was correlated with changes in surface roughness. As the viscosity of ILs can be relatively high, which has implications for the lubricating properties, the hydrodynamic forces between the surfaces have therefore also been studied. The linear increase in repulsive force with speed, expected from hydrodynamic interactions, is clearly observed, and these forces further inhibit the potential for stiction. Remarkably, the viscosity extracted from the data is dramatically reduced compared to the bulk value, indicative of a surface ordering effect which significantly reduces viscous losses.     

Mechanism of hydrodynamic separation of biological objects in microchannel devices

In this study, the separation mechanism employed in hydrodynamic chromatography in microchannel devices is analyzed. The main purpose of this work is to provide a methodology to develop a predictive model for hydrodynamic chromatography for biological macromolecules in microchannels and to assess the importance of various phenomenological coefficients. A theoretical model for the hydrodynamic chromatography of particles in a microchannel is investigated herein. A fully developed concentration profile for non-reactive particles in a microchannel was obtained to elucidate the hydrodynamic chromatography of these particles. The external forces acting on the particles considered in this model include the van der Waals attractive force, double-layer force as well as the gravitational force. The surface forces, such as van der Waals attractive force as well as the double-layer repulsive force, can either enhance or hinder the average velocity of the macromolecular particles. The average velocity of the particles decreases with the molecular radius because the van der Waals attractive force increases the concentration of the particles near the channel surface, which is the low-velocity region. The transport velocity of the particles is dominated by the gravity and the higher density enlarges the effect caused by gravity.     

Strong attraction among the fully hydrophilic {Mo72Fe30} macroanions

We report the study on the unique driving forces of the self-assembly of fully hydrophilic, soluble {Mo72Fe30} macroanions into single-layer, vesicle-like "blackberry" structures in water and mixed solvents. The hydrophobic interaction that is responsible for the vesicle formation of amphiphilic surfactants does not contribute to the current blackberry formation because of the absence of hydrophobic moiety. The hydrogen bond, van der Waals force, and chemical interaction only play minor roles. Laser light scattering and conductance measurements on a series of {Mo72Fe30}/ethanol/H2O solutions show that a certain amount of negative charges are necessary for the self-assembly, clearly indicating the existence of long-range attraction between macroanions, presumably due to the small counterions in between. The experimental results suggest that the charges on macroanions play a dual effect: short-range electrostatic repulsion and long-range "like-charge attraction", which is the major source of attractive force between hydrophilic macroanions, while van der Waals force, hydrogen bonds, and temporary inter-{Mo72Fe30} Fe-O-Fe chemical linking may also have minor contributions.     

Analytical Dispersion Force Calculations for Nontraditional Geometries

Presented in this paper are first-principle-based approximate macroscopic models of the van der Waals adhesion force for a variety of particle shapes interacting with an infinite cylinder. In particular, expressions for the van der Waals adhesion force and interaction energy are developed for a (1) spherical particle/infinite cylinder, (2) disk-like particle/infinite cylinder, (3) disk-like particle oriented edgewise to an infinite cylinder, and (4) a deformed slice/infinite cylinder. The models presented depict expected trends in the behavior of both the force of adhesion and the interaction energy between different geometric configurations. These results are also used to demonstrate the impact of contact time on the adhesion force for cylindrical fibers in contact with a disk-shaped particle. After long time intervals where the disk-like particles have remained in contact with the cylinder, the adhesion force may lead to significant deformation of the attached particle. Hence, the adhesion force for a fourth geometric set which represents the most likely scenario for attached particles with long contact times is developed. As will be shown, this scenario results in the highest values of adhesion force and interaction energy. Copyright 2000 Academic Press.     

Dynamics and Morphology of Holes in Dewetting of Thin Films

The formation and growth of holes in apolar nonslipping Newtonian thin films subjected to long-range Lifshitz-van der Waals forces are investigated based directly on numerical solutions of the thin-film equation. The nonphysical divergences of the hydrodynamic model and of the van der Waals force at the three-phase contact line are removed by inclusion of the short-range Born repulsion. Three distinct regimes of the hole growth after its appearance are identified: (1) a short, unsteady phase in which the dynamic contact angle and velocity change rapidly, followed by (2) a long, quasi-steady phase with slow logarithmic changes, and finally (3) a hindered phase in which rims of the neighboring holes overlap and lead to formation of equilibrium drops. The cross section of the rim surrounding a growing hole is noncircular and asymmetric, with higher slopes near the contact line. A slight depression is created ahead of the moving rim, but the regions of the film away from the rim remain undisturbed. For very viscous (e.g., polymeric) liquids displaying small contact angles, a nonlinear regime of hole growth (radius ~ timeq, with the exponent q approximately 0.7-0.9) is obtained for realistic time scales. Copyright 1999 Academic Press.     

Trajectory Analysis and Collision Efficiency during Microbubble Flotation

The hydrodynamic interaction between a rising bubble and a sedimenting particle during microbubble flotation is considered. The effects of attractive van der Waals forces and attractive or repulsive electrostatic forces are included. A mathematical model is presented which is used to perform a trajectory analysis and to calculate collision efficiencies between the bubble and particle. It is shown that collision efficiencies and the nature of the bubble-particle interactions are strongly dependent on the relative strengths of the van der Waals and electrostatic forces and on the lengthscales over which these forces act. It is demonstrated that optimal operating conditions can be suggested to achieve efficient microbubble flotation by correctly accounting for the interaction of van der Waals, electrostatic, and hydrodynamic forces. Copyright 1999 Academic Press.