Thermodynamic properties of the unique self-assembly of {Mo72Fe30} inorganic macro-ions in salt-free and salt-containing aqueous solutions

Static and dynamic laser light scattering techniques are used to monitor the slow self-assembly of 2.5-nm-diameter, hollow spherical, fully hydrophilic heteropolyoxometalate {Mo72Fe30} macro-ions into single-layer vesicle-like "blackberries" (averaging approximately 50-60 nm in diameter) in dilute salt-free and salt-containing aqueous solutions, to obtain the thermodynamic properties of the unique self-assembly. A very high activation energy is observed during the transition from the single ion (general solute state) to blackberries (so-called "second solute state"), which might be responsible for the interestingly slow self-assembly process in dilute solutions. The thermodynamic parameters of the blackberry formation can be affected by adding simple electrolytes into the solution, because the electrostatic interactions are responsible for the unique self-assembly, and the effects of various anions and cations (in the low salt concentration regimes) are discussed. Multivalent anions make the single {Mo72Fe30} macro-ions more stable and make the blackberry formation more difficult. Small cations carrying more charges tend to accelerate the self-assembly process. This is the first study on the thermodynamic properties of the novel self-assembly in dilute solutions and the equilibrium and transition between the two solute states of macro-ions in solution.     

Deprotonations and charges of well-defined {Mo72Fe30} nanoacids simply stepwise tuned by pH allow control/variation of related self-assembly processes

The solution behavior of the largest inorganic acid known thus far, the neutral, spherical iron/molybdenum/oxide nanocluster {Mo72Fe30} ([triple bond{(MoVI) MoVI5}12FeIII30 1a), including the pH-controlled deprotonation, is reported. The acidic properties are due to the 30 peripheral, weakly acidic FeIII(H2O) groups that form a unique Archimedean solid with all edges and dihedral angles being equal, the icosidodecahedron, and therefore an "isotropic" surface. Interestingly, the aqueous solutions are stable even for months because of the inertness of the spherical solutes and the presence of the hard FeIII and MoVI centers. The stability can be nicely proven by the very characteristic Raman spectrum showing, because of the (approximately) icosahedral symmetry, only a few lines. Whereas the {Mo72Fe30} clusters exist as discrete, almost neutral, molecules in aqueous solution at pH < 2.9, they get deprotonated and self-associate into single-layer blackberry-type structures at higher pH while the assembly process (i.e., the size of the final species) can be controlled by the pH values; this allows the deliberate generation of differently sized nanoparticles, a long-term goal in nanoscience. The average hydrodynamic radius (Rh) of the self-assembled structures decreases monotonically with increasing number of charges on the {Mo72Fe30} macroanions (from approximately 45 nm at pH approximately 3.0 to approximately 15 nm at pH approximately 6.6), as studied by laser light scattering and TEM techniques. The {Mo72Fe30} macroions with high-stability tunable charges/surfaces, equal shape, and masses provide models for the understanding of more complex polyelectrolyte solutions while the controllable association and dissociation reported here of the assembled soft magnetic materials with tuneable sizes could be interesting for practical applications.     

Self-assembly of polyoxometalate macroanion-capped pd0 nanoparticles in aqueous solution

The self-assembly behavior of polyoxometalate (POM) macroanion-capped 3-nm-radius Pd (0) nanoparticles in aqueous solution is reported. Pd(0) nanoparticles are synthesized from reducing K(2)PdCl(4) by using Dawson-type V-substituted POM K(9)[H(4)PV (IV)W(17)O(62)] (HPV(IV)) clusters as the reductant and stabilizer simultaneously in acidic aqueous solutions. The starting molar ratio of K(2)PdCl(4) to HPV(IV) (R value) in solution is important to the formation of Pd nanoparticles. When R < 0.6, approximately 20-nm-radius Pd(0) colloidal nanocrystals are formed. When R > or = 0.6, HPV-capped (and therefore negatively charged) 3-nm-radius Pd(0) nanoparticles are formed, which can further self-assemble into stable, hollow, spherical, 30-50-nm-radius supramolecular structures in solution without precipitation, as confirmed by light scattering and transmission electron microscopy studies. This structure resembles the unique supramolecular structure formed by hydrophilic POM macroanions in polar solvents, which we refer to as "blackberry" structures. It is the first evidence that the blackberry formation can occur in hydrophobic nanoparticle systems when the surface of nanoparticles is modified to be partially hydrophilic. Counterions play an important role in the self-assembly of Pd nanoparticles, possibly providing an attractive force for blackberry formation, which is the case for blackberry formation in POM macroanionic solutions. Our results suggest that the blackberry formation is not a specific property of POM macroions but most likely a general phenomenon for nanoparticles with relatively hydrophilic surfaces and suitable sizes and charges in a polar solvent.     

Self-assembly of Yttrium-containing lacunary polyoxotungstate macroanions in solution with controllable supramolecular structure size by pH or solvent content

The self-assembly and the formation of "Blackberry" type supramolecular structures for a type of Yttrium-containing polyoxometalate (K 15Na 6(H 3O) 9[(PY 2W 10O 38) 4(W 3O 14)].9H 2O, or {P 4Y 8W 43}) macroanions is characterized by using static and dynamic light scattering techniques. {P 4Y 8W 43} macroions are found to form hollow, spherical, single-layer "blackberry" structures in water and water-acetone mixed solvents. Very interestingly, the blackberry size can be accurately controlled by either changing acetone content in water-acetone mixed solvents, or by changing solution pH in aqueous solution. The blackberry size increases with decreasing pH (lower charge density) or higher acetone content in the mixed solvent (lower dielectric constant) and the blackberry size can change in responding to the change of external conditions. This indicates that the {P 4Y 8W 43} macroanions possess the properties of both "strong electrolyte type" and "weak electrolyte type" macroions, as we outlined previously. This is due to the special chemical feature of such clusters, which can be treated as Na 2HPO 4-type electrolytes in solution. The kinetics of the blackberry formation can be controlled by temperature.     

Counter-Ion Association Effect in Dilute Giant Polyoxometalate [AsIII 12CeIII 16(H2O)36W148O524]76−({W148}) and [Mo132O372(CH3COO)30 (H2O)72]42− ({Mo132}) Macroanionic Solutions

This article reports the use of simple conductivity measurements to explore the state of small counter-ions (mostly NH ₄ ⁺ and Na⁺) in $[\hbox{As}^{\rm III}_{12}\hbox{Ce}^{\rm III}_{16}(\hbox{H}_2\hbox{O})_{36}\hbox{W}_{148}\hbox{O}_{524}]^{76-} (\{\hbox{W}_{148}\})$ and $[\hbox{Mo}_{132}\hbox{O}_{372}(\hbox{CH}_{3}\hbox{COO})_{30} (\hbox{H}_{2}\hbox{O})_{72}]^{42-} (\{\hbox{Mo}_{132}\})$ macroanionic solutions. All the solutions are dialyzed to remove the extra electrolytes. Conductivity measurements on {(NH₄)₇₀Na₆W₁₄₈} and {(NH₄)₄₂Mo₁₃₂} solutions at different concentrations both before and after dialysis indicate that the state of counter-ions has obvious concentration dependence. The “counter-ion association” phenomenon, that is, some small counter-ions closely associate with macroanions and move together, has been observed in both types of macroionic solutions above certain concentration. The association of counter-ions in hydrophilic macroionic solutions provides support on our previous speculation that the counter-ions might be responsible for the unique self-assembly of such macroanions into single-layer blackberry-type structures.     

Automatic and subsequent dissolution and precipitation process in inorganic macroionic solutions

We report an interesting phenomenon in the NaCl-containing aqueous solution of {Mo72Fe30} macroions, where dissolution and precipitation processes of hydrophilic macroions automatically and subsequently occur without changing external conditions or chemical reactions. Our previous work indicates that {Mo72Fe30} macroions tend to slowly self-assemble into single-layer, vesicle-like "blackberries". Such macroions have two solute states in solutions: the entropy-favored general state (homogeneous distribution) and the free-energy favored second solute state (blackberries). With additional salts, the originally stable blackberries become less stable due to their shortened screening length, and they tend to further aggregate and precipitate at much lower concentrations. Therefore, in such a solution, we can observe a subsequent process: crystal solids --> homogeneous single macroion solution --> homogeneous blackberry solution --> precipitates containing noncrystalline solids. In other words, we observed the behaviors of both soluble inorganic ions and colloids in the same solution due to the unique features of the macroions. Static and dynamic laser light scattering, as well as AFM measurements, were used to characterize both the macroionic solutions and the precipitates.     

Force Measurements between Semifluorinated Thiolate Self-Assembled Monolayers: Long-Range Hydrophobic Interactions and Surface Charge

Long-range interactions between self-assembled monolayers (SAMs) of semifluorinated alkanethiols have been studied by direct force measurements in water and aqueous NaCl solutions. SAMs prepared from three different thiols, with identical fluorinated head groups but varying hydrocarbon spacer lengths, were investigated: CF(3)(CF(2))(9)(CH(2))(x)SH, where x=2, 11, or 17. Force measurements show that the interactions in water and electrolyte solutions are composed of both double-layer interactions emerging from what appears to be charges adsorbed onto the surfaces and long-range "hydrophobic" attractions, in excess of the expected van der Waals forces. The three investigated thiols produce similar results in force measurements, though the contact angles with water are slightly different. The "hydrophobic" attraction has the form of step-like attractive discontinuities in the force profiles at separations ranging from 20 to 40 nm, caused by bridging of microscopic bubbles residing at the surfaces. The shape or range of these discontinuities are not significantly affected by replacement of the water with either 1 mM or 1 M NaCl solutions. The origin of the charges causing the electrostatic double-layer interaction is unclear, but some possible causes are discussed. Copyright 2001 Academic Press.     

A complete macroion-"blackberry" assembly-macroion transition with continuously adjustable assembly sizes in {Mo132} water/acetone systems

A complete, continuous transition from discrete macroions to blackberry structures, and then back to discrete macroions, is reported for the first time in the system of {Mo132}/water/acetone, with {Mo132} (full formula (NH4)42[Mo132O372(CH3COO)30(H2O)72].ca.300H2O.ca.10CH3COONH4) as the C60-like anionic polyoxomolybdate molecular clusters. Laser light scattering studies reveal the presence of the self-assembled {Mo132} blackberry structures in water/acetone mixed solvents containing 3 vol % to 70 vol % acetone, with the average hydrodynamic radius (Rh) of blackberries ranging from 45 to 100 nm with increasing acetone content. Only discrete {Mo132} clusters are found in solutions containing <3 vol % and >70 vol % acetone. The complete discrete macroion (cluster)-blackberry-discrete macroion transition helps to identify the driving forces behind the blackberry formation, a new type of self-assembly process. The charge density on the macroions is found to greatly affect the blackberry formation and dissociation, as the counterion association is very dominant around blackberries. The transitions between single {Mo132} clusters and blackberries, and between the blackberries with different sizes, are achieved by only changing the solvent quality.     

Dissolution of cellulose in aqueous NaOH/urea solution: role of urea

Urea can improve the solubility and stability of cellulose in aqueous alkali solution, while its role has not come to a conclusion. To reveal the role of urea in solution, NMR was introduced to investigate the interaction between urea and the other components in solution. Results from chemical shifts and longitudinal relaxation times show that: (1) urea has no strong direct interaction with cellulose as well as NaOH; (2) urea does not have much influence on the structural dynamics of water. Urea may play its role through van der Waals force. It may accumulate on the cellulose hydrophobic region to prevent dissolved cellulose molecules from re-gathering. The driving force for the self-assembly of cellulose and urea molecules might be hydrophobic interaction. In the process of cellulose dissolution, OH^? breaks the hydrogen bonds, Na⁺ hydrations stabilize the hydrophilic hydroxyl groups and urea stabilizes the hydrophobic part of cellulose.     

溶致液晶中金属纳米粒子的掺杂及其作用机制研究

在用琥珀酸二异辛酯磺酸钠(AOT)构建的具有长程有序结构的层状溶致液晶内, 用不同方式导入预制的亲油或亲水贵金属纳米粒子, 可得到纳米粒子分布在不同介观空间内的无机/有机杂合体. 依据小角X射线散射和偏光显微镜结果, 通过分析掺杂纳米粒子与液晶模板的相互作用, 对掺杂前后体系结构的变化及制得杂合体的稳定性进行了表征. 结果表明, 除考虑掺杂粒子与层状模板空间的匹配外, 体系中静电斥力、范德华引力和Helfrich涨落力之间的平衡是维持液晶结构稳定的基本条件.     

Spontaneous Self‐Assembly of γ‐Cyclodextrins in Dilute Solutions with Tunable Sizes and Thermodynamic Stability

The behavior in dilute solution of phosphate‐functionalized γ‐cyclodextrin macroanions with eight charges on the rim was explored. The hydrophilic macroions in mixed solvents show strong attraction between each other, mediated by the counterions, and consequently self‐assemble into blackberry‐type hollow spherical structures. Time‐resolved laser light scattering (LLS) measurements at high temperature ruled out the possibility of hydrogen bonding as the main driving force in the self‐assembly and indicated the good thermodynamic stability of assemblies regulated by the charge. The transition from single macroions to blackberries can be tuned by adjusting the content of organic solvent. The sizes of blackberries vary with the charge density of γ‐cyclodextrin by adjusting pH. It is the first report that pure cyclodextrins can generate supramolecular structures by themselves in dilute solution. The unique solution behavior of macroions provides a new opportunity to assemble cyclodextrin into functional materials and devices.     

Wheel-shaped polyoxotungstate [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- macroanions form supramolecular "blackberry" structure in aqueous solution

The hydrophilic polyoxotungstate [Cu20Cl(OH)24(H2O)12(P8W48O184)]25- ({Cu20P8W48}) self-assembles into single-layer, hollow, spherical "blackberry"-type structures in aqueous solutions, as studied by dynamic light scattering (DLS), static light scattering (SLS), zeta potential analysis, and scanning electron microscopy (SEM) techniques. This represents the first report of blackberry formation for a non-Mo-containing polyoxometalate. There is no obvious change in the shape and size of the blackberries during the slow blackberry formation process, neither with macroionic concentration nor with temperature. Our results suggest that the blackberry-type structure formation is most likely a general phenomenon for hydrophilic macroions with suitable size and charge in a polar solvent, and not a specific property of polyoxomolybdates and their derivatives. The {Cu20P8W48} macroions are thus far the smallest type of macroions to date (equivalent radius < 2 nm) showing the unique self-assembly behavior, helping us to move one step closer toward identifying the transition point from simple ions (can be described by the Debye-Hückel theory) to macroions in very dilute solutions. Moreover, by using {Cu20P8W48} blackberry-type structures as the model system, the electrophoretic properties of macroionic supramolecular structures are studied for the first time via zeta-potential analysis. The mobility of blackberry-type structures is determined and used for understanding the state of small cations in solution. We notice that the average charge density on each {Cu20P8W48} macroanion in a blackberry is much lower than that of discrete "free" {Cu20P8W48} macroions. This result suggests that some small alkali counterions are closely associated with, or even incorporated into, the blackberry-type structures and thus do not contribute to solution conductivity. This model is fully consistent with our speculation that monovalent counterions play an important role in the self-assembly of macroions, possibly providing an attractive force contributing to blackberry formation.     

Detachment of Particles from Surfaces: An AFM Study

We have measured interactions between hydrophilic and hydrophobic surfaces in an aqueous medium at various pH and ionic strengths as well as in some organic solvents using atomic force microscopy and analyzed them in terms of particle adhesion and detachment from surfaces. In hydrophilic systems the forces observed were found to be well described by DLVO theory at large separation distances. Very long range hydrophobic forces were not observed in hydrophilic-hydrophobic systems. Nevertheless, the jump into contact was found to occur at distances greater that those predicted by just van der Waals attraction. The interaction between two hydrophobic surfaces was dominated by the long-range attraction due to hydrophobic forces. This interaction was found to be sensitive to the type of substrate as well as to the pH and electrolyte concentration. Measured pull-off forces showed poor reproducibility. However, average values showed clear trends and were used to estimate interfacial energies or work of adhesion for all systems studied by means of the Derjaguin approximation. These values were compared to those calculated by the surface tension component theory using the acid-base approach. Good qualitative agreement was obtained, giving support for the usefulness of this approach in estimating interfacial energies between surfaces in liquid media. A comparison of the measured adhesion force with hydrodynamic detachment experiments showed good qualitative agreement. Copyright 2001 Academic Press.     

Specific and nonspecific interaction forces between Escherichia coli and silicon nitride, determined by poisson statistical analysis

The nature of the physical interactions between Escherichia coli JM109 and a model surface (silicon nitride) was investigated in water via atomic force microscopy (AFM). AFM force measurements on bacteria can represent the combined effects of van der Waals and electrostatic forces, hydrogen bonding, steric interactions, and perhaps ligand-receptor type bonds. It can be difficult to decouple these forces into their individual components since both specific (chemical or short-range forces such as hydrogen bonding) and nonspecific (long-range colloidal) forces may be present in the overall profiles. An analysis is presented based on the application of Poisson statistics to AFM adhesion data, to decouple the specific and nonspecific interactions. Comparisons with classical DLVO theory and a modified form of a van der Waals expression for rough surfaces were made in order to help explain the nature of the interactions. The only specific forces in the system were due to hydrogen bonding, which from the Poisson analysis were found to be -0.125 nN. The nonspecific forces of 0.155 nN represent an overall repulsive interaction. These nonspecific forces are comparable to the forces calculated from DLVO theory, in which electrostatic-double layer interactions are added to van der Waals attractions calculated at the distance of closest approach, as long as the van der Waals model for "rough" spherical surfaces is used. Calculated electrostatic-double layer and van der Waals interactions summed to 0.116 nN. In contrast, if the classic (i.e., smooth) sphere-sphere model was used to predict the van der Waals forces, the sum of electrostatic and van der Waals forces was -7.11 nN, which appears to be a large overprediction. The Poisson statistical analysis of adhesion forces may be very useful in applications of bacterial adhesion, because it represents an easy way to determine the magnitude of hydrogen bonding in a given system and it allows the fundamental forces to be easily broken into their components.     

Self-assembly of CdTe nanoparticles into dendrite structure: a microsensor to Hg2+

A novel microsensor to Hg(2+) was fabricated through self-assembly of aqueous CdTe nanoparticles (NPs). The morphologies of self-assembly mainly included classical dendrites, straight dendrites, and small islands. The formation process of these morphologies was systematically investigated by using the field emission scanning electron microscope, confocal laser scanning microscope, and atom force microscope instruments, etc. The proposed mechanism showed that the dendrite structure was formed via manipulating the short-range van der Waals interaction and long-range electrostatic interaction, which was realized through altering the ligand and concentration of the CdTe NPs. Furthermore, polymers with positive charges were used to effectively control the morphology of the self-assembly as well as improve the property of photoluminescence. These CdTe dendrites were used as microsensors to Hg(2+), which presented the advantages of low cost, quick detection time, high selectivity, and easy operation.     

Spontaneous self-assembly of metal-organic cationic nanocages to form monodisperse hollow vesicles in dilute solutions

In this communication we report the unprecedented spontaneous self-assembly of cationic nanoporous metal-organic coordination cages (nanocages) into giant hollow vesicle-like structures in polar solvents. Such highly soluble nanocages (macrocations) have separated hydrophobic regions. However, their assembly is not due to hydrophobic interactions but the counterion-mediated attractions, very similar to the unique self-assembly of polyoxometalate macroanions into single-layer, spherical blackberry structures, as characterized by laser light scattering and TEM studies. This is the first study on the solution behavior of metal-organic nanocages and also the first report on the self-assembly of soluble macrocations. Therefore, the blackberry structure is likely to be a universal type of self-assembly for soluble macroions. In addition, the self-assembled nanocages can provide blackberry structures a wide range of organic functionalities that are impossible to reach with purely inorganic systems, which may open the door to many types of applications.     

The “hydrophobic effect”: Essentially a van der Waals interaction

Summary It has been shown thermodynamically, and illustrated by means of a typical example, that the preferential attraction between hydrophobic determinants immersed in water, commonly alluded to as the hydrophobic effect, can be entirely ascribed to van der Waals interactions. Quantitatively, in water, the attraction between two hydrophobic determinants is stronger than the attraction between a hydrophobic and a hydrophilic determinant, although the latter attraction is not so small as to be negligible. The interaction between hydrophilic determinants in water is attractive but small and may be easily overwhelmed by the electrostatic repulsion which occurs between such entities.There is no repulsion by the solvent. On the contrary, the attraction between water and a hydrophobic material as well as between water and a hydrophilic material is strong. This interaction does play a role in determining the overall strength of the interaction between hydrophobic and hydrophilic determinants but cannot render the attraction between such determinants negligible. The attraction between hydrophobic and hydrophilic determinants in an aqueous medium can be made exeedingly small and may indeed (after lowering the surface tension of the liquid) be changed into a repulsion. The latter phenomenon is used in the elution step of the protein separation method called hydrophobic chromatography.

---

Zusammenfassung Es wird auf thermodynamischer Grundlage gezeigt und an Hand eines typischen Beispiels erläutert, daß die Anziehung zwischen hydrophoben Partikel in Wasser vollständig durch van der Waals-Wechselwirkungen erklärt werden kann. Die Anziehung zwischen solchen Teilchen oder Molekülen ist stärker als die Anziehung zwischen hydrophoben und hydrophilen Partikeln in Wasser, die jedoch nicht vernachlässigbar klein ist. Die Wechselwirkung zwischen hydrophilen Partikeln ist so klein, daß sie leicht von elektrostatischen Wechselwirkungen überdeckt werden kann.Eine Abstoßung durch das Lösungsmittel findet nicht statt. Im Gegenteil, die Anziehung zwischen Wasser und einem hydrophoben Material ebenso wie diejenige zwischen Wasser und einem hydrophilen Material ist beträchtlich. Diese Wechselwirkung spielt zwar eine Rolle in der gesamten Wechselwirkung zwischen hydrophoben und hydrophilen Partikeln, kann aber die Anziehung zwischen hydrophob und hydrophil in Wasser nicht zum Verschwinden bringen. Die Wechselwirkung zwischen hydrophob und hydrophil kann jedoch durch Erniedrigung der Oberflächenspannung des Wassers abstoßend gemacht werden. Dieser Umstand wird im Elutionsschritt des als hydrophobe Chromatographie bekannten Verfahrens zur Trennung von Proteinen benutzt.

     

Van der Waals Emulsions: Emulsions Stabilized by Surface‐Inactive,Hydrophilic Particles via van der Waals Attraction

Surface‐inactive, highly hydrophilic particles are utilized to effectively and reversibly stabilize oil‐in‐water emulsions. This is a result of attractive van der Waals forces between particles and oil droplets in water, which are sufficient to trap the particles in close proximity to oil–water interfaces when repulsive forces between particles and oil droplets are suppressed. The emulsifying efficiency of the highly hydrophilic particles is determined by van der Waals attraction between particle monolayer shells and oil droplets enclosed therein and is inversely proportional to the particle size, while their stabilizing efficiency is determined by van der Waals attraction between single particles and oil droplets, which is proportional to the particle size. This differentiation in mechanism between emulsification and stabilization will significantly advance our knowledge of emulsions, thus enabling better control and design of emulsion‐based technologies in practice.     

Van der Waals Emulsions: Emulsions Stabilized by Surface‐Inactive,Hydrophilic Particles via van der Waals Attraction

Surface‐inactive, highly hydrophilic particles are utilized to effectively and reversibly stabilize oil‐in‐water emulsions. This is a result of attractive van der Waals forces between particles and oil droplets in water, which are sufficient to trap the particles in close proximity to oil–water interfaces when repulsive forces between particles and oil droplets are suppressed. The emulsifying efficiency of the highly hydrophilic particles is determined by van der Waals attraction between particle monolayer shells and oil droplets enclosed therein and is inversely proportional to the particle size, while their stabilizing efficiency is determined by van der Waals attraction between single particles and oil droplets, which is proportional to the particle size. This differentiation in mechanism between emulsification and stabilization will significantly advance our knowledge of emulsions, thus enabling better control and design of emulsion‐based technologies in practice.     

Molecular hydrophobic attraction and ion-specific effects studied by molecular dynamics

Much is written about "hydrophobic forces" that act between solvated molecules and nonpolar interfaces, but it is not always clear what causes these forces and whether they should be labeled as hydrophobic. Hydrophobic effects roughly fall in two classes, those that are influenced by the addition of salt and those that are not. Bubble adsorption and cavitation effects plague experiments and simulations of interacting extended hydrophobic surfaces and lead to a strong, almost irreversible attraction that has little or no dependence on salt type and concentration. In this paper, we are concerned with hydrophobic interactions between single molecules and extended surfaces and try to elucidate the relation to electrostatic and ion-specific effects. For these nanoscopic hydrophobic forces, bubbles and cavitation effects play only a minor role and even if present cause no equilibration problems. In specific, we study the forced desorption of peptides from nonpolar interfaces by means of molecular dynamics simulations and determine the adsorption potential of mean force. The simulation results for peptides compare well with corresponding AFM experiments. An analysis of the various contributions to the total peptide-surface interactions shows that structural effects of water as well as van der Waals interactions between surface and peptide are important. Hofmeister ion effects are studied by separately determining the effective interaction of various ions with hydrophobic surfaces. An extension of the Poisson-Boltzmann equation that includes the ion-specific potential of mean force yields surface potentials, interfacial tensions, and effective interactions between hydrophobic surfaces. There, we also analyze the energetic contributions to the potential of mean force and find that the most important factor determining ion-specific adsorption at hydrophobic surfaces can best be described as surface-modified ion hydration.