A validated stripping voltammetric procedure for quantification of the anti-hypertensive and benign prostatic hyperplasia drug terazosin in tablets and human serum

The electrochemical behavior of terazosin at the hanging mercury drop electrode was studied in Britton-Robinson buffer (pH 2-11), acetate buffer (4.5-5.5), and in 0.1 M solution of each of sodium sulfate, sodium nitrate, sodium perchlorate and potassium chloride as supporting electrolytes. The square-wave adsorptive cathodic stripping voltammogram of terazosin exhibited a single well-defined two-electron irreversible cathodic peak which may be attributed to the reduction of CO double bond of the drug molecule. A fully validated, simple, high sensitive, precise and inexpensive square-wave adsorptive cathodic stripping voltammetric procedure was described for determination of terazosin in bulk form, tablets and human serum. A mean recovery for 1×10⁻⁸ M terazosin in bulk form, following preconcentration onto the hanging mercury drop electrode for 60 s at a −1.0 V (versus Ag/AgCl/KCl_s), of 99±0.7% (n=5) was obtained. Limits of detection (LOD) and quantitation (LOQ) of 1.5×10⁻¹¹ and 5×10⁻¹¹ M bulk terazosin were achieved, respectively. The proposed procedure was successfully applied to determination of the drug in its Itrin^® tablets and human serum samples. The achieved LOD and LOQ of the drug in human serum samples were 5.3×10⁻¹¹ and 1.8×10⁻¹⁰ M THD, respectively. The pharmacokinetic parameters of the drug in human plasma were estimated as: C_max=77.5 ng ml⁻¹, t_max=1.75 h, AUC_0-t=602.3 ng h ml⁻¹, K_e=0.088 h⁻¹ and t_1/2=11.32 h) which are favorably compared with those reported in literature.     

Determination of amlodipine besylate by adsorptive square-wave anodic stripping voltammetry on glassy carbon electrode in tablets and biological fluids

The adsorptive and electrochemical behavior of amlodipine besylate on a glassy carbon electrode were explored in Britton-Robinson buffer solution by using cyclic and square-wave voltammetry. Cyclic voltammetric studies indicated the oxidation of amlodipine besylate at the electrode surface through a single two-electron irreversible step and fundamentally controlled by adsorption. The solution conditions and instrumental parameters were optimized for the determination of the authentic drug by adsorptive square-wave stripping voltammetry. Amlodipine besylate gave a sensitive adsorptive oxidation peak at 0.510 V (versus Ag/AgCl). The oxidation peak was used to determine amlodipine besylate in range 4.0×10⁻⁸ to 2.0×10⁻⁶ with a detection limit of 1.4×10⁻⁸ M. The procedure was successfully applied for the assay of amlodipine besylate in tablets (Norvasc)^®. The percentage recoveries were in agreement with those obtained by the reference method. Applicability to assay the drug in urine and serum samples was illustrated. The mean percentage recoveries were 96.31±1.18 and 96.98±1.17, respectively. The proposd method used for monotoring clinically relevant concntrations of drug in human urine and serum.     

Evaluation and application of Diffusive Gradients in Thin Films (DGT) technique using Chelex-100, Metsorb™ and Diphonix binding phases in uranium mining environments

A new resin- Diphonix^® in Diffusive Gradients in Thin Films (DGT) technique for the determination of uranium was investigated and compared with previously used binding phases for uranium, Chelex^®-100 and Metsorb™. The DGT gel preparation and the elution procedure were optimized for the new resin. The U uptake on Diphonix^® resin gel was 97.4 ± 1.5% (batch method; [U] = 20 μg L⁻¹; 0.01 M NaNO₃; pH = 7.0 ± 0.2). The optimal eluent was found to be 1 M 1-hydroxyethane-1, 1-diphosphonic acid (HEDPA) with an elution efficiency of 80 ± 4.2%. Laboratory DGT study on U accumulation using a DGT samplers with Diphonix^® resin showed a very good performance across a wide range of pH (3–9) and ionic strength (0.001–0.7 M NaNO₃). Diffusion coefficients of uranium at different pH were determined using both, a diffusion cell and the DGT time-series, demonstrating the necessity of the implementation of the effective diffusion coefficients into U-DGT calculations. Diphonix^® resin gel exhibits greater U capacity than Chelex^®-100 and Metsorb™ binding phase gels (a Diphonix^® gel disc is not saturated, even with loading of 10.5 μmol U). Possible interferences with Ca²⁺ (up to 1.33 × 10⁻² M), PO₄³⁻${{\text{PO}}_4}^{3\mathrm{-}}$ (up to 1.72 × 10⁻⁴ M), SO₄²⁻${{\text{SO}}_4}^{2\mathrm{-}}$ (up to 4.44 × 10⁻³ M) and −HCO₃${{\text{HCO}}_3}^{\mathrm{-}}$ (up to 8.20 × 10⁻³ M) on U-DGT uptake ([U] = 20 μg L⁻¹) were investigated. No effect or minor effect of Ca²⁺, PO₄³⁻${{\text{PO}}_4}^{3\mathrm{-}}$, SO₄²⁻${{\text{SO}}_4}^{2\mathrm{-}}$, and −HCO₃${{\text{HCO}}_3}^{\mathrm{-}}$ on the quantitative measurement of U by Diphonix^®-DGT was observed. The results of this study demonstrated the DGT technique with Diphonix^® resin is a reliable and robust method for the measurement of labile uranium species under laboratory conditions.     

Evaluation of steviol and its glycosides in Stevia rebaudiana leaves and commercial sweetener by ultra-high-performance liquid chromatography-mass spectrometry

Stevia rebaudiana leaves contain non-cariogenic and non-caloric sweeteners (steviol-glycosides) whose consumption could exert beneficial effects on human health. Steviol-glycosides are considered safe; nonetheless, studies on animals highlighted adverse effects attributed to the aglycone steviol. The aim of the present study was to develop and validate two different ultra-high-performance liquid chromatography methods with electrospray ionization mass spectrometry (UHPLC-MS) to evaluate steviol-glycosides or steviol in Stevia leaves and commercial sweetener (Truvia^®). Steviol-glycosides identity was preliminarily established by UV spectra comparison, molecular ion and product ions evaluation, while routine analyses were carried out in single ion reaction (SIR) monitoring their negative chloride adducts. Samples were sequentially extracted by methanol, cleaned-up by SPE cartridge and the analytes separated by UHPLC HSS C₁₈ column (150 mm × 2.1 mm I.D., 1.8 μm). The use of CH₂Cl₂ added to the mobile phase as source of Cl⁻ enhance sensitivity. The LLOD for stevioside, rebaudioside A, steviolbioside and steviol was 15, 50, 10 and 1 ng ml⁻¹, respectively. Assay validation demonstrated good performances in terms of accuracy (89–103%), precision (<4.3%), repeatability (<5.7%) and linearity (40–180 mg/g). Stevioside (5.8 ± 1.3%), rebaudioside A (1.8 ± 1.2%) and rebaudioside C (1.3 ± 1.4%) were the most abundant steviol-glycosides found in samples of Stevia (n = 10) from southern Italy. Rebaudioside A was the main steviol-glycosides found in Truvia^® (0.84 ± 0.03%). The amounts of steviol-glycosides obtained by the UHPLC-MS method matched those given by the traditional LC-NH₂-UV method. Steviol was found in all the leaves extract (2.7–13.2 mg kg⁻¹) but was not detected in Truvia^® (<1 μg kg⁻¹). The proposed UHPLC-MS methods can be applied for the routine quality control of Stevia leaves and their commercial preparations.     

The effect of spatial confinement of Nafion in porous membranes on macroscopic properties of the membrane

Polyelectrolytes were incorporated into porous reinforcing materials to study the properties of ionomers in confined spaces and to determine the effect of the porous material on the behaviour of the membranes. Nafion^® was imbibed into porous polypropylene (Celgard^®), ultra-high-molecular weight polyethylene (Daramic^®), and polytetrafluoroethylene (PTFE) films. Through the use of reinforcing materials, it is possible to prepare membranes that are thinner, but stronger than pure ionomer membranes. Thin reinforced membranes have advantages such as lower areal resistance (as low as 0.14 Ω cm² for 57 μm CG3501 + Nafion^® compared to 0.34 Ω cm² for 89 μm cast Nafion^®) and lower dimensional changes due to swelling (as low as a 4% change in length and width for WDM + Nafion^® compared to 13% for cast Nafion^®). Using reinforcing materials results in a reduction in important membrane properties compared to bulk Nafion^®, such as proton conductivity (as low as 0.016 S cm⁻¹ for CG3401 + Nafion^® compared to 0.076 S cm⁻¹ for cast Nafion^®), effective proton mobility (as low as 3.2 × 10⁻⁴ cm² V⁻¹ s⁻¹ CG3401 + Nafion^® compared to 7.6 × 10⁻⁴ cm² V⁻¹ s⁻¹ for cast Nafion^®), and water vapour permeance (as low as 0.036 g h⁻¹ Pa⁻¹ m⁻² for WDM + Nafion^® compared to 0.056 g h⁻¹ Pa⁻¹ m⁻² for cast Nafion^®). By normalizing the membrane properties with respect to ionomer content, it was possible to examine the properties of the Nafion^® inside the pores of the membranes. The proton conductivity (as low as 0.032 S cm⁻¹ for CG3401 + Nafion^®), effective proton mobility (as low as 3.6 × 10⁻⁴ cm² V⁻¹ s⁻¹ for CG3401 + Nafion^®), and water vapour permeability (as low as 2.7 × 10⁻⁶ g h⁻¹ Pa⁻¹ m⁻¹ for PTFE MP 0.1 + Nafion^®) of the ionomer in the membrane are also diminished compared to bulk Nafion^® due to decreased connectivity of the ionomer and a restriction in macromolecular motions caused by the pore walls. A series of porous materials with increasing pore were also examined. As the pore size of the PTFE MP materials increased from 0.1 μm to 10 μm, the proton conductivity (0.022 S cm⁻¹ to 0.041 S cm⁻¹), effective proton mobility ((4.1 to 5.6) × 10⁻⁴ cm² V⁻¹ s⁻¹), and water vapour permeability ((2.4 to 4.3) × 10⁻⁶ g h⁻¹ Pa⁻¹ m⁻¹) of the reinforced membranes improved with increasing pore size and the properties of the ionomer inside the membranes approached the value of bulk Nafion^®.     

ResonSense: simple linear fluorescent probes for quantitative homogeneous rapid polymerase chain reaction

Here we report a strand-specific fluorescent homogeneous assay format for rapid polymerase chain reaction (PCR). A number of similar assays are commonly used for research applications and are an ideal solution for a closed tube quantitative PCR. These assays use fluorescent resonant energy transfer (FRET) between donor and acceptor fluorescent moieties as the reporting mechanism. However, for different reasons these assays do not report amplification when very rapid cycling times are used. This is because current assays, such as TaqMan^®, are limited, in terms of assay speed, by the 5′-3′ exonuclease activity of Taq DNA polymerase. Other assays based on hybridisation require either a complex de-conformational event to occur, or require more than one probe to report amplification. Reducing the complexity of the experiment reduces costs in terms of design, optimisation and manufacture. Here, we describe ResonSense^® chemistries that use a simple linear fluorescent-labelled probe and a DNA minor-groove binding dye as either donor or acceptor moieties in a homogeneous assay format on the LightCycler^®. This assay format will provide for rapid analysis of samples and so it is particularly well suited to point-of-use testing.     

Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.     

Fullerene-C60-modified electrode as a sensitive voltammetric sensor for detection of nandrolone--an anabolic steroid used in doping

The electrochemical behaviour of nandrolone is investigated by cyclic, differential pulse and square-wave voltammetry in phosphate buffer system at fullerene-C₆₀-modified electrode. The modified electrode shows an excellent electrocatalytic activity towards the oxidation of nandrolone resulting in a marked lowering in the peak potential and considerable improvement of the peak current as compared to the electrochemical activity at the bare glassy carbon electrode. The oxidation process is shown to be irreversible and diffusion-controlled. A linear range of 50 μM to 0.1 nM is obtained along with a detection limit and sensitivity of 0.42 nM and 0.358 nA nM⁻¹, respectively, in square-wave voltammetric technique. A diffusion coefficient of 4.13 × 10⁻⁸ cm² s⁻¹ was found for nandrolone using chronoamperometry. The effect of interferents, stability and reproducibility of the proposed method were also studied. The described method was successfully employed for the determination of nandrolone in human serum and urine samples. A cross-validation of observed results by GC-MS indicates that the results are in good agreement with each other.     

A composite thin film optical sensor for dissolved oxygen in contaminated aqueous environments

A robust optical composite thin film dissolved oxygen sensor was fabricated by ionically trapping the dye ruthenium(II) tris(4,7-diphenyl-1,10-phenanthroline) dichloride in a blended fluoropolymer matrix consisting of Nafion^® and Aflas^®. Strong phosphorescence, which was strongly quenched by dissolved oxygen (DO), was observed when the sensor was immersed in water. The sensor was robust, optically transparent, with good mechanical properties. Fast response, of a few seconds, coupled with sensitivity of about 0.1 mg L⁻¹ (DO) over the range 0-30 mg L⁻¹ and resistance to leaching, were also exhibited by this system. The Stern-Volmer (SV) plot exhibited slight downward turning at all oxygen concentrations. A linear plot was obtained when the SV equation was modified to account for the varying sensitivity of dye molecules in the matrix to the quencher. Good long term stability was observed.     

Electrochemical behavior of hexafluoroniobate, heptafluorotungstate, and oxotetrafluorovanadate anions in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide room temperature ionic liquid

Electrochemical behavior of hexafluoroniobate (Nb(V)F₆⁻), heptafluorotungstate (W(VI)F₇⁻), and oxotetrafluorovanadate (V(V)OF₄⁻) anions has been investigated in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (BMPyrTFSA) ionic liquid at 298 K by means of cyclic voltammetry and chronoamperometry. Cyclic voltammograms at a Pt electrode showed that Nb(V)F₆⁻ anion is reduced to Nb(IV)F₆²⁻ by a one-electron reversible reaction. Electrochemical reductions of W(VI)F₇⁻ and V(V)OF₄⁻ anions at a Pt electrode are quasi-reversible and irreversible reactions, respectively, according to cyclic voltammetry. The diffusion coefficients of Nb(V)F₆⁻, W(VI)F₇⁻ and V(V)OF₄⁻ determined by chronoamperometry are 1.34 × 10⁻⁷, 7.45 × 10⁻⁸ and 2.49 × 10⁻⁷ cm² s⁻¹, respectively. The Stokes radii of Nb(V)F₆⁻, W(VI)F₇⁻, and V(V)OF₄⁻ in BMPyrTFSA have been calculated to be 0.23, 0.38, and 0.12 nm, from the diffusion coefficients and viscosities obtained.     

Assay of anti-coagulant drug warfarin sodium in pharmaceutical formulation and human biological fluids by square-wave adsorptive cathodic stripping voltammetry

The cyclic voltammogram of the anti-coagulant drug warfarin sodium at the hanging mercury drop electrode exhibited a well-defined single two-electron irreversible peak over the pH range 4-7, which may be attributed to the reduction of the CO double bond of the drug molecule. Based on the interfacial adsorptive character of the drug onto the mercury electrode surface, a square-wave cathodic stripping procedure was optimized for its trace determination. The calibration plot was linear over the concentration range of 5×10⁻⁹ to 4×10⁻⁷ M warfarin sodium in Britton-Robinson (B-R) buffer of pH 5, with limits of detection and quantitation of 6.5×10⁻¹⁰ and 2.1×10⁻⁹ M warfarin sodium, respectively. The proposed procedure was successfully applied for assay of warfarin sodium in its pharmaceutical formulation “hemofarin tablets”, human serum and urine without the necessity for sample pretreatment or time-consuming extraction or evaporation steps, prior to assay of the drug. Limits of detection of 1.1×10⁻⁹ and 1.3×10⁻⁸ M warfarin sodium were achieved, while limits of quanitation of 3.7×10⁻⁹ and 4.3×10⁻⁸ M warfarin sodium were estimated in human serum and urine, respectively. The pharmacokinetic profiles of the drug were studied and the estimated pharmacokinetic parameters were favorably compared with those reported in literature.     

Microwave assisted synthesis of the fragrant compound Calone 1951

Calone 1951^®, 7-methyl-benzo[b][1,4]dioxepin-3-one, possesses a strong marine, ozone note with floral nuances and is synthesised via a three-step procedure using microwave irradiation. High yields were obtained, and reaction times reduced to a few minutes, allowing for an efficient and inexpensive synthesis of Calone 1951^®.     

Stripping voltammetric determination of silymarin in formulations and human blood utilizing bare and modified carbon paste electrodes

Silymarin is one of the most powerful natural substances that have the ability to protect and rebuild the liver cells damaged by alcohol and other toxic substances. Silymarin showed two irreversible anodic peaks in buffered solutions (pH 2.5-8.0) at either the bare carbon paste electrode or the montmorillonite-Ca modified carbon paste one. These two peaks have been attributed to oxidation of the two phenolic OH groups at positions C-20 and C-7 of silymarin molecule. A square-wave adsorptive anodic stripping voltammetry method was optimized for determination of silymarin utilizing the bare and the modified carbon paste electrodes. The method was fully validated and successfully applied for the determination of silymarin in commercial formulations and human serum without prior extraction utilizing both carbon paste electrodes. Limits of quantitation of 1 × 10⁻⁷ and 7 × 10⁻⁹ mol L⁻¹ silymarin have been achieved in bulk form or in formulations while 2 × 10⁻⁷ and 8 × 10⁻⁹ mol L⁻¹ silymarin were achieved in spiked human serum utilizing the bare carbon paste electrode and the modified one, respectively. The two electrodes exhibited excellent selectivity towards silymarin even in the presence of 10²to 10³-fold excess of its co-formulated drugs, common excipients, and common metal ions. The pharmacokinetic parameters of silymarin in plasma of healthy human volunteers were estimated following the administration of a single oral dose of 120 mg silymarin utilizing the modified carbon paste electrode. The estimated pharmacokinetic parameters were favorably compared with those reported in literature.     

Nuclear fluorination of 2,4-diarylthiazoles with Accufluor

A series of 2,4-diphenylthiazole derivatives were synthesized and directly fluorinated at the 5-position by reaction with the N-F fluorinating reagent Accufluor^®. Although fluorination occurred selectively at the thiazole ring, it was always incomplete and thus yields for the novel fluorinated products were low to moderate (19-43%) following purification to remove starting material. Nonetheless, the target compounds were obtained in a convenient and straightforward manner. Selectfluor^® was not as effective as Accufluor^® as it gave a trace amount of the 5-chlorothiazole that was difficult to remove by chromatography.     

Radiolabeling of HER2-specific Affibody molecule with F-18

The presence of human epidermal growth factor type 2 (HER2) on 20-30% of human breast cancer is a prognostic indicator of more rapid disease progression and a therapeutic indicator for anti-HER2 monoclonal antibodies. Because the literature has demonstrated some discordance between primary and metastatic tumors in the same patient for expression of the HER2 marker, we set out to develop an imaging agent that could be used to assess the marker concentration in vivo in an individual patient. The pharmaceutical company Affibody^® AB has optimized the specificity of Affibody^® molecules for HER2. Two Affibody^® molecules, a 7 kDa and an 8 kDa protein, were designed with a single carboxy terminal cysteine in order to provide a specific location for the purposes of labeling for various types of imaging. We have prepared [¹⁸F]FBEM utilizing a coupling reaction between [¹⁸F]fluorobenzoic acid and aminoethylmaleimide. We then optimized the conjugation of this radiolabeled maleimide to the free sulfhydryl of cysteine by incubating at pH 7.4 in phosphate buffered saline containing 0.1% sodium ascorbate. An overall uncorrected yield of radiolabeled Affibody^® molecule of approximately 10% from [¹⁸F]fluoride was achieved in a 2 h synthesis. These conjugated Affibody^® molecules were obtained with a specific activity of 2.51 ± 0.92 MBq/μg. Characterization of the product by HPLC-MS supported the conjugation of [¹⁸F]FBEM with the Affibody^® molecule. The radiolabeled Affibody^® molecule retained its binding specificity as demonstrated by successful imaging of xenografts expressing HER2.     

Tetradecyl(trihexyl)phosphonium chloride ionic liquid single-drop microextraction for electrothermal atomic absorption spectrometric determination of lead in water samples

A highly efficient single-drop microextraction (SDME) procedure using a low-cost room temperature ionic liquid (RTIL), i.e., tetradecyl(trihexyl)phosphonium chloride (CYPHOS^® IL 101), for Pb determination at trace levels in real water samples was developed. Lead was chelated with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) reagent and extracted into a 4 μL microdrop of CYPHOS^® IL 101. The RTIL drop was directly injected into the graphite furnace of the electrothermal atomic absorption spectrometer (ETAAS). Under optimal microextraction conditions, a preconcentration factor of 32 was achieved with only 1.5 mL of sample resulting in a phase-volume ratio of 375. The limit of detection (LOD) obtained was 3.2 ng L⁻¹ and the relative standard deviation (RSD) for 10 replicates at 0.5 μg L⁻¹ Pb²⁺ concentration level was 4.9%, calculated at peak heights. The calibration graph was linear from concentration levels near the detection limits up to at least 4.5 μg L⁻¹ with a correlation coefficient of 0.9996. The accuracy of the methodology was evaluated by analysis of a certified reference material (CRM). The method was successfully applied to the determination of Pb in tap, mineral, well and river water samples.     

Calibration and use of the Chemcatcher passive sampler for monitoring organotin compounds in water

An integrative passive sampler (Chemcatcher^®) consisting of a 47 mm C₁₈ Empore™ disk as the receiving phase overlaid with a thin cellulose acetate diffusion membrane was developed and calibrated for the measurement of time-weighted average water concentrations of organotin compounds [monobutyltin (MBT), dibutyltin (DBT), tributlytin (TBT) and triphenyltin (TPhT)] in water. The effect of water temperature and turbulence on the uptake rate of these analytes was evaluated in the laboratory using a flow-through tank. Uptake was linear over a 14-day period being in the range: MBT (3-23 mL day⁻¹), DBT (40-200 mL day⁻¹), TBT (30-200 mL day⁻¹) and TPhT (30-190 mL day⁻¹) for all the different conditions tested. These sampling rates were high enough to permit the use of the Chemcatcher^® to monitor levels of organotin compounds typically found in polluted aquatic environments. Using gas chromatography (GC) with either ICP-MS or flame photometric detection, limits of detection for the device (14-day deployment) for the different organotin compounds in water were in the range of 0.2-7.5 ng L⁻¹, and once accumulated in the receiving phase the compounds were stable over prolonged periods. Due to anisotropic exchange kinetics, performance reference compounds could not be used with this passive sampling system to compensate for changes in sampling rate due to variations in water temperature, turbulence and biofouling of the surface of the diffusion membrane during field deployments. The performance of the Chemcatcher^® was evaluated alongside spot water sampling in Alicante Habour, Spain which is known to contain elevated levels of organotin compounds. The samplers provided time-weighted average concentrations of the bioavailable fractions of the tin compounds where environmental concentrations fluctuated markedly in time.     

Adsorptive stripping voltammetric determination of the anti-inflammatory drug celecoxib in pharmaceutical formulation and human serum

Celecoxib is a cyclooxygenase inhibitor, that has been recently and intensively prescribed as an anti-inflammatory drug in rheumatic osteoarthiritis. A robust, highly reliable and reproducible square-wave (SW) adsorptive cathodic stripping voltammetric procedure was developed for the determination of celecoxib in pharmaceutical formulation and human serum. The analytical procedure was based on the reduction of the CN of the pyrazole ring of the drug molecule at the mercury electrode surface in Britton-Robinson buffer of pH 7.0. The SW adsorptive cathodic stripping voltammogram of celecoxib showed a single well-defined peak at −1.54 V (vs. Ag/AgCl/KCl_s) using an accumulation potential of −0.70 V, frequency of 120 Hz, scan increment of 10 mV and pulse amplitude of 25 mV. Repeatability was examined for 1×10⁻⁸ M CXB drug solution after 30 s pre-concentration and a mean recovery of 99.4±0.4% (n=5) was achieved. For 90 s preconcentration, a linear concentration range of 1×10⁻⁹-2×10⁻⁸ M CXB and a detection limit of 1.86×10⁻¹⁰ M were achieved. The proposed procedure was successfully applied for the determination of the drug in capsules and human serum with mean recoveries of 101.5±0.6 and 98.8±1.1%, respectively. A detection and quantitation limits of 1.0×10⁻⁹ M (0.4 ng ml⁻¹) and 4.7×10⁻⁹ M (1.3 ng ml⁻¹) were achieved for the determination of the drug in human serum. Moreover, the procedure was useful for study of the pharmacokinetic profile of celecoxib in a healthy volunteer after administration of a single oral dose (celebrex®, 200 mg).     

Application of thermal analysis to the study of antituberculosis drugs–excipient compatibility

First-line drugs (rifampicin, RIF; isoniazid, INH; ethambutol, ETA; and pyrazinamide, PZA) recommended in conventional treatment of tuberculosis were analyzed in 1:1 w/w binary mixtures with microcrystalline cellulose MC 101 (CEL) and lactose supertab^® (LAC) by differential scanning calorimetry (DSC), thermogravimetry (TG), differential thermal analysis (DTA), and Fourier transformed infrared analysis (FTIR) as part of development of fixed dose combination (FDC) tablets. Evidence of interaction between drug and pharmaceutical excipients was supposed when peaks disappearance or shifting were observed on DTA and DSC curves, as well as decreasing of decomposition temperature onset and TG profiles, comparing to pure species data submitted to the same conditions. LAC was showed to interact with RIF (absence of drug fusion and recrystallization events on DSC/DTA curves); INH (thermal events of the mixtures different from those observed for drug and excipient pure in DSC/DTA curves); PZA (decrease on drug fusion peak in DSC/DTA curves), and ETA (shift on drug onset fusion and absence of pure LAC events on DSC/DTA curves). In all cases, an important decrease on the temperature of drug decomposition was verified for the mixtures (TG analysis). However, FTIR analysis showed good correlation between theoretical and experimental drug-LAC spectra except for INH–LAC mixture, evidencing high incompatibility between these two species and suggesting that those interactions with PZA and RIF were thermally induced. No evidence of incompatibilities in CEL mixtures was observed to any of the four-studied drugs.     

An amperometric method for the detection of amitrole, glyphosate and its aminomethyl-phosphonic acid metabolite in environmental waters using passive samplers

The herbicides amitrole and glyphosate, and its metabolite aminomethyl-phosphonic acid (AMPA), in water samples have been directly analysed by high-performance liquid chromatography using an electrochemical (EC) detector. Limits of detection of 0.3 μg mL⁻¹ for glyphosate, 0.05 μg mL⁻¹ for AMPA and 0.03 μg mL⁻¹ for amitrole were comparable to those obtained by other authors using EC and also by liquid chromatography coupled to mass spectrometry, but the latter method requires derivatisation and pre-concentration of the sample whereas EC methods show similar sensitivity without the need of any derivatisation. The method was specifically designed to analyse extracts from passive samplers used for monitoring of polar herbicide residues in waters. To this purpose, three types of Empore^® disks were tested for their ability to adsorb and desorb these ionic, polar analytes. A procedure for their extraction from the membranes and reducing the interferences from other substances present in natural waters (i.e. humic acids) is described. The method is simple, does not require sophisticated equipment and is valid for the analysis and monitoring of herbicides residues using passive samplers.