Rattle-type hollow CaWO4:Tb(3+)@SiO2 nanocapsules as carriers for drug delivery

Rattle-type hollow nanocapsules are among of the most promising candidates as drug carriers owing to their huge inner space and multifunctional material combination. In this paper, rattle-type hollow CaWO(4):Tb(3+)@SiO(2) nanocapsules with a diameter of 100-110 nm and a wall thickness around 10 nm were fabricated. The hollow silica nanospheres were used as nano-reactors and the luminescent core of CaWO(4):Tb(3+) was post-filled into the nano-reactors by a vacuum nano-casting route combined with a Pechini-type sol-gel method. Subsequently, doxorubicin hydrochloride (DOX), a model of an anti-cancer drug, is loaded into the CaWO(4):Tb(3+)@SiO(2) nanocapsules and their cell cytotoxicity, cancer cell uptake and drug release behavior are investigated in vitro. The prepared multifunctional inorganic nanocapsules show a loading capacity for DOX as high as 124 mg g(-1) and sustained-release properties. The release profile of the drug from DOX-loaded nanocapsules can last over five days. Besides, the blank CaWO(4):Tb(3+)@SiO(2) shows very low cytotoxicity against cancer cell lines (HeLa cell) while the DOX-loaded nanocapsules exhibit relatively high efficiency for killing of HeLa cells. The rapid cancer cell uptake process is observed by confocal laser scanning microscopy. The results indicate that a rattle-type hollow CaWO(4):Tb(3+)@SiO(2) nanocapsule has the potential to be used as drug carrier in therapy. Moreover, it is possible to extend the synthetic strategy in this study to other rattle-type multifunctional composites to meet various demands.     

Electrospinning synthesis and luminescence properties of one-dimensional La(9.33)(SiO4)6O2: Ln3+ (Ln = Ce, Eu, Tb) microfibers

One-dimensional La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and low voltage cathodoluminescence (CL) as well as kinetic decay were used to characterize the resulting samples. SEM and TEM results indicated that the diameter of the microfibers annealed at 1000 °C for 3 h was 200-245 nm. The microfibers were further composed of fine and closely linked nanoparticles. La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors showed the characteristic emission of Ce(3+) (5d → 4f), Eu(3+) ((5)D(0)→(7)F(J)) and Tb(3+) ((5)D(3,4)→(7)F(J)) under ultraviolet excitation and low-voltage electron beams (3-5 kV) excitation. An energy transfer from Ce(3+) to Tb(3+) was observed in the La(9.33)(SiO(4))(6)O(2): Ce(3+), Tb(3+) phosphor under ultraviolet excitation and low-voltage electron beam excitation. Luminescence mechanisms were proposed to explain the observed phenomena. Blue, red and green emission can be realized in La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers by changing the doping ions. So the La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors have potential applications in full-color field emission displays.     

Facile synthesis of 3D flowerlike CeO2 microspheres under mild condition with high catalytic performance for CO oxidation

Three-dimensional (3D) hierarchical flowerlike CeO(2) microspheres with 5-8μm diameter were hydrothermally synthesized by using multiple surfactants at very mild condition (100°C) and characterized by XRD, low-temperature N(2) adsorption, SEM, TEM, TG, FT-IR, and UV-vis spectroscopies. The results show that the flowerlike ceria prepared with the co-surfactant of sodium dodecyl sulfonic and PEG 600 possesses multilevel pore structure and low band gap energy. A possible formation mechanism of flowerlike ceria is that 3D flowerlike microspheres are assembled by 1D nanowires formed through an aggregation of 0D nanoparticles. Based on the unique structure and morphology, the prepared flowerlike CeO(2) exhibits more amount of surface capping oxygen, higher concentrations of Ce(3+) and O vacancy, and more (100) lattice planes, resulting in its higher catalytic activity for CO oxidation than general bulk ceria. Furthermore, photoluminescence property testing shows that flowerlike CeO(2) exhibits the violet blue light emission with a blue shift, because of the quantum size effect, differing from general ceria.     

Controlled fabrication and shape-dependent luminescence properties of hexagonal NaCeF4, NaCeF4:Tb3+ nanorods via polyol-mediated solvothermal route

Hexagonal monodisperse NaCeF(4) and NaCeF(4):Tb(3+) nanorods have been successfully synthesized by a polyol-mediated solvothermal route with ethylene glycol (EG) as solvent. The crystalline phase, size, morphology, and luminescence properties were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectra as well as dynamic decays. The experimental results indicate that the content of NH(4)F and NaNO(3) are crucial in controlling product morphology and size. Nanorods with different aspect ratios could be controllably obtained under settled conditions. Shape-dependent luminescence and energy transfer routes from Ce(3+) to Tb(3+) in NaCeF(4):Tb(3+) nanorods were observed by the modified local crystal field environment around rare earth ions. The 4f-5d transitions of Ce(3+) ions have much higher sensitivity to the anisotropic shape of samples than that of Tb(3+) ions.     

Energy transfer and tunable luminescence properties of Eu3+ in TbBO3 microspheres via a facile hydrothermal process

Tb (1- x) BO 3: xEu (3+) ( x = 0-1) microsphere phosphors have been successfully prepared by a simple hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), low-voltage cathodoluminescence (CL), and time-resolved emission spectra as well as lifetimes were used to characterize the samples. The as-obtained phosphor samples present sphere-like agglomerates composed of nanosheets with highly crystallinity in spite of the moderate reaction temperature of 200 degrees C. Under ultraviolet excitation into the 4f (8) --> 4f (7)5d transition of Tb (3+) at 245 nm (or 284 nm) and low-voltage electron beams' excitation, TbBO 3 samples show the characteristic emission of Tb (3+) corresponding to (5)D 4 --> (7)F 6, 5, 4, 3 transitions; whereas TbBO 3:Eu (3+) samples mainly exhibit the characteristic emission of Eu (3+) corresponding to (5)D 0 --> (7)F 0, 1, 2, 3, 4 transitions due to an efficient energy transfer occurs from Tb (3+) to Eu (3+). The increase of Eu (3+) concentration leads to the increase of the energy-transfer efficiency from Tb (3+) to Eu (3+) but also enhances the probability of the interaction between neighboring Eu (3+), which results in the concentration quenching. The PL color of TbBO 3: xEu (3+) phosphors can be easily tuned from green, yellow, orange, to red-orange by changing the doping concentration ( x) of Eu (3+), making the materials have potential applications in fluorescent lamps for advertizing signs and other color display fields.     

Nanocrystalline CaYAlO4:Tb3+/Eu3+ as promising phosphors for full-color field emission displays

Eu(3+) and/or Tb(3+)-doped CaYAlO(4) phosphor samples were synthesized by Pechini-type sol-gel method. X-Ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), photoluminescence (PL) and cathodoluminescence (CL) spectra were used to characterize the samples. For CaYAlO(4):Tb(3+), it is shown that the Tb(3+)-doping concentration has a significant effect on the (5)D(3)/(5)D(4) emission intensity of Tb(3+), which is attributed to the cross relaxation from (5)D(3) to (5)D(4). Under the 4f(8)→ 4f(7)5d excitation of Tb(3+) or low-voltage electron beams excitation, the CaYAlO(4):Tb(3+) phosphors show tunable luminescence from blue to cyan, and then to green with the change of Tb(3+)-doping concentration. The CaYAlO(4):Eu(3+) samples exhibit a reddish-orange emission of Eu(3+) corresponding to (5)D(0,1)→(7)F(0,1,2,3) transitions. Furthermore, a white emission can be realized in the single phase CaYAlO(4) host by reasonably adjusting the doping concentrations of Tb(3+) and Eu(3+) under low-voltage electron beams excitation. Compared with the commercial blue (Y(2)SiO(5):Ce(3+)) and green (ZnO:Zn) phosphors, CaYAlO(4):0.1%Tb(3+) and CaYAlO(4):5%Tb(3+) phosphors have higher CL intensity and stability under continuous electron bombardment. Due to the excellent CL properties and good CIE chromaticity coordinates, the as-prepared Tb(3+)/Eu(3+)-doped CaYAlO(4) nanocrystalline phosphors have potential application in FEDs devices.     

YF3:Ln3+ (Ln = Ce, Tb, Pr) submicrospindles: hydrothermal synthesis and luminescence properties

YF(3):Ln(3+) (Ln = Ce, Tb, Pr) microspindles were successfully fabricated by a facile hydrothermal method. X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), lifetimes, photoluminescence (PL) and low-voltage cathodoluminescence (CL) were used to characterize the resulting samples. The lengths and diameters of YF(3):0.02Ce(3+) microspindles are around 760 nm and 230 nm, respectively. Adding dilute acid and trisodium citrate (Cit(3-)) are essential for obtaining YF(3) microspindles. A potential formation mechanism for YF(3) microspindles has been presented. PL spectroscopy investigations show that YF(3):Ce(3+) and YF(3):Tb(3+) microcrystals exhibit the characteristic emission of Ce(3+) 5d → 4f and Tb(3+ 5)D(4)→(7)F(J) (J = 6-3) transitions, respectively. In addition, the energy transfer from Ce(3+) to Tb(3+) was investigated in detail for YF(3):Ce(3+), Tb(3+) microspindles. Under the excitation of electron beams, YF(3):Pr(3+) show quantum cutting emission and YF(3):Ce(3+), Tb(3+) phosphors exhibit more intense green emission than the commercial phosphor ZnO:Zn.     

The fabrication of one-dimensional Ca4Y6(SiO4)6O: Ln3+ (Ln=Eu, Tb) phosphors by electrospinning method and their luminescence properties

One-dimensional Ca(4)Y(6)(SiO(4))(6)O: Ln(3+) (Ln=Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD) pattern and high-resolution transmission electron microscopy (HRTEM) confirmed that the fibers were composed of hexagonal Ca(4)Y(6)(SiO4)(6)O phase. Thermogravimetric and differential scanning calorimetry (TG-DSC) results showed that the Ca(4)Y(6)(SiO4)(6)O phase began to crystallize at 740°C. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results indicated that the diameter of as-prepared microfibers ranged from 390 to 900 nm and the diameter of the microfibers annealed at 1000°C ranged from to 120 to 260 nm. Under ultraviolet and low-voltage electron beams (3-5 kV) excitation, the Ca(4)Y(6)(SiO(4))(6)O: Ln(3+) (Ln=Eu, Tb) samples showed the red and green emission, corresponding to (5)D(0)→(7)F(2) transition of Eu(3+) and (5)D(4)→(7)F(5) transition of Tb(3+), respectively.     

Luminescence and energy transfer in lu(3)al(5)o(12) scintillators co-doped with ce(3+) and tb(3+)

Lu(3)Al(5)O(12) (LuAG) doped with Ce(3+) is a promising scintillator material with a high density and a fast response time. The light output under X-ray or γ-ray excitation is, however, well below the theoretical limit. In this paper the influence of codoping with Tb(3+) is investigated with the aim to increase the light output. High resolution spectra of singly doped LuAG (with Ce(3+) or Tb(3+)) are reported and provide insight into the energy level structure of the two ions in LuAG. For Ce(3+) zero-phonon lines and vibronic structure are observed for the two lowest energy 5d bands and the Stokes' shift (2 350 cm(-1)) and Huang-Rhys coupling parameter (S = 9) have been determined. Tb(3+) 4f-5d transitions to the high spin (HS) and low spin (LS) states are observed (including a zero-phonon line and vibrational structure for the high spin state). The HS-LS splitting of 5400 cm(-1) is smaller than usually observed and is explained by a reduction of the 5d-4f exchange coupling parameter J by covalency. Upon replacing the smaller Lu(3+) ion with the larger Tb(3+) ion, the crystal field splitting for the lowest 5d states increases, causing the lowest 5d state to shift below the (5)D(4) state of Tb(3+) and allowing for efficient energy transfer from Tb(3+) to Ce(3+) down to the lowest temperatures. Luminescence decay measurements confirm efficient energy transfer from Tb(3+) to Ce(3+) and provide a qualitative understanding of the energy transfer process. Co-doping with Tb(3+) does not result in the desired increase in light output, and an explanation based on electron trapping in defects is discussed.     

A novel strategy for controllable emissions from Eu3+ or Sm3+ ions co-doped SrY2O4:Tb3+ phosphors

Trivalent rare-earth (RE) ions (Eu(3+), Tb(3+) and Sm(3+)) activated multicolor emitting SrY(2)O(4) phosphors were synthesized by a sol-gel process. The structural and morphological studies were performed by the measurements of X-ray diffraction profiles and scanning electron microscope (SEM) images. The pure phase of SrY(2)O(4) appeared after annealing at 1300 °C and the doping of RE ions did not show any effect on the structural properties. From the SEM images, the closely packed particles were observed due to the roughness of each particle tip. The photoluminescence (PL) analysis of individual RE ions activated SrY(2)O(4) phosphors exhibits excellent emission properties in their respective regions. The Eu(3+) co-activated SrY(2)O(4):Tb(3+) phosphor creates different emissions by controlling the energy transfer from Tb(3+) to Eu(3+) ions. Based on the excitation wavelengths, multiple (green, orange and white) emissions were obtained by Sm(3+) ions co-activated with SrY(2)O(4):Tb(3+) phosphors. The decay measurements were carried out for analyzing the energy transfer efficiency and the possible ways of energy transfer from donor to acceptor. The cathodoluminescence properties of these phosphors show similar behavior as PL properties except the energy transfer process. The obtained results indicated that the energy transfer process was quite opposite to the PL properties. The calculated CIE chromaticity coordinates of RE ions activated SrY(2)O(4) phosphors confirmed the red, green, orange and white emissions.     

A facile synthesis and photoluminescence properties of water-dispersible Re3+ doped CeF3 nanocrystals and solid nanocomposites with polymers

Water-dispersible Re(3+) doped CeF(3) colloidal nanocrystals with well controllable morphology and high crystallinity have been successfully synthesized through a solvothermal process. The TEM images illustrate that the Re(3+) doped CeF(3) nanocrystals are rectangular (or cubic) with a mean diameter of ~10 nm. The excellent dispersibility in some of the polar solvents including water is achieved by using polyethyleneimine as the capping agent. The amine groups of the polymer chains on one hand bind to the nanocrystal surface; on the other hand the free ones could link to functional materials including bio-molecules. The CeF(3) nanocrystals doped with Tb(3+) and Dy(3+) ions show the characteristic emission of Tb(3+ 5)D(4)-(7)F(J) (J = 6-3, with (5)D(4)-(7)F(5) green emission at 542 nm as the strongest one) and Dy(3+ 4)F(9/2)-(6)H(15/2) (blue-green color at 478 nm) and (4)F(9/2)-(6)H(13/2) (yellow color at 571 nm) transitions, respectively. The energy transfer from Ce(3+) to Tb(3+) and Dy(3+) was also investigated in detail. In vitro studies of Re(3+) doped CeF(3) colloidal nanocrystals on HepG2 cells confirm their excellent biological compatibility. The obtained solid CeF(3)?: Tb(3+)/PDMS nanocomposites are very stable and flexible and exhibit strong green photoluminescence upon UV excitation.     

Novel red-emitting Ba2Tb(BO3)2Cl:Eu phosphor with efficient energy transfer for potential application in white light-emitting diodes

A novel red-emitting Ba(2)Tb(BO(3))(2)Cl:Eu phosphor possessing a broad excitation band in the near-ultraviolet (n-UV) region was synthesized by the solid-state reaction. Versatile Ba(2)Tb(BO(3))(2)Cl compound has a rigid open framework, which can offer two types of sites for various valence's cations to occupy, and the coexistence of Eu(2+)/Eu(3+) and the red-emitting luminescence from Eu(3+) with the aid of efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) have been investigated. Ba(2)Tb(BO(3))(2)Cl emits green emission with the main peak around 543 nm, which originates from (5)D(4) → (7)F(5) transition of Tb(3+). Ba(2)Tb(BO(3))(2)Cl:Eu shows bright red emission from Eu(3+) with peaks around 594, 612, and 624 nm under n-UV excitation (350-420 nm). The existence of Eu(2+) can be testified by the broad-band excitation spectrum, UV-vis reflectance spectrum, X-ray photoelectron spectrum, and Eu L(3)-edge X-ray absorption spectrum. Decay time and time-resolved luminescence measurements indicated that the interesting luminescence behavior should be ascribed to efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) in Ba(2)Tb(BO(3))(2)Cl:Eu phosphors.     

Strong visible up-conversion emission in Tb3+, Tm3+ and Tb3+-Tm3+ co-doped tellurite glasses sensitized by Yb3+

Up-conversion luminescence characteristics under 975 nm excitation have been investigated with Tb3+/Tm3+/Yb3+ triply doped tellurite glasses. Here, green (547 nm: (5)D(4)-->(7)F(4)) and red (660 nm: (5)D(4)-->(7)F(2)) up-conversion (UC) luminescence originating from Tb3+ is observed strongly, because of the quadratic dependences of emission intensities on the excitation power. Especially, the UC luminescence was intensified violently with the energy transfer from the Tm3+ ions involves in the Tb3+ excitation. To the Tb3+/Tm3+/Yb3+ triply doped glass system, a novel up-conversion mechanism is proposed as follows: the energy of (3)G(4) level (Tm3+) was transferred to (5)D(4) (Tb(3+)) and the 477-nm UC luminescence of Tm3+ was nearly quenched.     

水热法制备多层核壳结构Gd_2O_3:Eu~(3+)空心微球

以稀土硝酸盐-葡萄糖的混合溶液作为前驱体,采用一步水热法和随后的热处理得到了多层核壳结构Gd_2O_3:Eu~(3+)空心微球,并用X-射线衍射(XRD)、场发射扫描电镜(FESEM)、透射电镜(TEM)、X-射线能量色散光谱(EDS)和荧光光谱等测试手段对所得样品进行了表征.结果表明:所得空心球样品为纯的立方相的Gd_2O_3.具有规则的多层核壳空心结构,空心球的直径在2～3μm左右,壁厚约为100 nml,并且Gd_2O_3:Eu~(3+)空心球是由尺寸约为30 nm的球形纳米颗粒白组装而成.样品中含有Gd、Eu、O元素.该空心球样品具有强的Eu~(3+)的特征红光发射以及长的荧光寿命,可以用来作为时间分辨荧光标记物.     

The quantum cutting of Tb(3+) in Ca(6)Ln(2)Na(2)(PO(4))(6)F(2) (Ln = Gd, La) under VUV-UV excitation: with and without Gd(3+)

The VUV-vis spectroscopic properties of Tb(3+) activated fluoro-apatite phosphors Ca(6)Ln(2-x)Tb(x)Na(2)(PO(4))(6)F(2) (Ln = Gd, La) were studied. The results show that phosphors Ca(6)Gd(2-x)Tb(x)Na(2)(PO(4))(6)F(2) with Gd(3+) ions as sensitizers have intense absorption in the VUV range. The emission color of both phosphors can be tuned from blue to green by changing the doping concentration of Tb(3+) under 172 nm excitation. The visible quantum cutting (QC) via cross relaxation between Tb(3+) ions was observed in cases with and without Gd(3+). Though QC can be realized in phosphors Ca(6)La(2-x)Tb(x)Na(2)(PO(4))(6)F(2), we found that Gd(3+)-containg phosphors have a higher QC efficiency, confirming that the Gd(3+) ion indeed plays an important role during the quantum cutting process. In addition, the energy transfer process from Gd(3+) to Tb(3+) as well as (5)D(3)-(5)D(4) cross relaxation was investigated and discussed in terms of luminescence spectra and decay curves.     

Luminescence switching behavior through redox reaction in Ce3+ co-doped LaPO4:Tb3+ nanorods: re-dispersible and polymer film

Re-dispersible Tb(3+) doped LaPO(4) nanorods have been prepared using ethylene glycol (EG) as a capping agent as well as reaction medium at a relatively low temperature of 150 °C. The X-ray diffraction study reveals that all the doped samples are well crystalline with a monoclinic structure of the LaPO(4) phase. The luminescence intensity of (5)D(4)→(7)F(5) transition at 543 nm (green) is more prominent than that of (5)D(4)→(7)F(6) transition at 487 nm (blue) for all the samples. This is related to the polarizing effect from [PO(4)](3-) to the Tb(3+) site. Concentration dependent luminescence study shows that the luminescence intensity of Tb(3+) increases up to 10 at.% and decreases above this. This is due to the concentration quenching effect arising from cross relaxation among Tb(3+)-Tb(3+) ions. The results show that nanoparticles prepared in EG medium gives an enhanced luminescence compared to that prepared in water. This is attributed to the multiphonon relaxation effect from O-H groups surrounding over nanoparticles as well as the extent of increase of agglomeration among particles for samples prepared in water. Significant enhancement in the emission of Tb(3+) is also observed when Ce(3+) is used as the sensitizer in LaPO(4):Tb(3+)nanorods. The optimum concentration of Ce(3+) for maximum luminescence is found to be 7 at.% in Ce(3+) sensitized LaPO(4):Tb(3+) (5 at.%). Based on the energy transfer process from Ce(3+) to Tb(3+), the luminescence of Tb(3+) can be switched OFF and ON by performing oxidation and reduction of Ce(3+)?Ce(4+) using KMnO(4) and ascorbic acid, respectively. The samples are re-dispersible in water, methanol and can be incorporated into polyvinyl alcohol (PVA) films. They show a dark green emission under ultraviolet radiation.     

Bifunctional Mixed-Lanthanide Cyano-Bridged Coordination Polymers Ln(0.5)Ln'(0.5)(H(2)O)(5)[W(CN)(8)] (Ln/Ln' = Eu(3+)/Tb(3+), Eu(3+)/Gd(3+), Tb(3+)/Sm(3+))

A new family of mixed-lanthanide cyano-bridged coordination polymers Ln(0.5)Ln'(0.5)(H(2)O)(5)[W(CN)(8)] (where Ln/Ln' = Eu(3+)/Tb(3+), Eu(3+)/Gd(3+), and Tb(3+)/Sm(3+)) containing two lanthanide and one transition metal ions were obtained and characterized by X-ray diffraction, photoluminescence spectroscopy, magnetic analyses, and theoretical computation. These compounds are isotypical and crystallize in the tetragonal system P4/nmm forming two-dimensional grid-like networks. They present a magnetic ordering at low temperature and display the red Eu(3+) ((5)D(0) → (7)F(0-4)) and green Tb(3+) ((5)D(4) → (7)F(6-2)) characteristic photoluminescence. The Tb(0.5)Eu(0.5)(H(2)O)(5)[W(CN)(8)] compound presents therefore green and red emission and shows Tb(3+)-to-Eu(3+) energy transfer.     

Preparation of luminescent and mesoporous Eu3+/Tb3+ doped calcium silicate microspheres as drug carriers via a template route

Luminescent and mesoporous Eu(3+)/Tb(3+) doped calcium silicate microspheres (LMCS) were synthesized by using mesoporous silica spheres as the templates. The LMCS and drug-loaded samples were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), N(2) adsorption/desorption, and photoluminescence (PL) spectra. The results reveal that the LMCS have uniform spherical morphology with a diameter around 400 nm and the mesopore size of 6 nm. The prepared samples exhibit little cytotoxicity at concentrations below 5 mg mL(-1) via MTT assay. In addition, drug storage/release properties of the LMCS were demonstrated for ibuprofen (IBU). The obtained LMCS can be used to encapsulate drugs and release them. Under excitation by UV light, the IBU-loaded samples still show the characteristic (5)D(0)-(7)F(1-3) emission lines of Eu(3+) and the characteristic (5)D(4)-(7)F(3-6) emission lines of Tb(3+). The PL intensity of Eu(3+) in the drug carrier system increases with the cumulative released amount of IBU, making the drug release able to be tracked or monitored by the change of luminescence of Eu(3+). The LMCS reported here with mesoporous structure, good biocompatibility and luminescent property can be a promising drug delivery carrier.     

Solid state white light emitting systems based on CeF3: RE3+ nanoparticles and their composites with polymers

A series of doped CeF(3): RE(3+) (RE(3+): Tb(3+), Eu(3+) and Dy(3+)) nanoparticles were synthesized, with the aim of obtaining a white light emitting composition, by a simple polyol route at 160°C and characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FT-IR) and photoluminescence. Uniformly distributed and highly water-dispersible rectangular nanoparticles (length ~15-20 nm, breadth ~5-10 nm) were obtained. The steady state and time resolved luminescence studies confirmed efficient energy transfer from the host to activator ions. Lifetime studies revealed that optimum luminescence is observed for 2.5 mol% Dy(3+) and 7.5 mol% Tb(3+). The energy transfer efficiencies (Ce(3+) to activators) were found to be 89% for CeF(3): Tb(3+) (7.5 mol%) nanoparticles and 60% for CeF(3): Dy(3+) (2.5 mol%) nanoparticles. Different concentrations of Tb(3+), Eu(3+) and Dy(3+) were doped to achieve a white light emitting phosphor for UV-based LEDs (light emitting diodes). Finally CeF(3), triply doped with 2.0 mol%Tb(3+), 4.5 mol% Eu(3+) and 3.5 mol% Dy(3+), was found to have impressive chromaticity co-ordinates, close to broad day light. The colloidal solutions of doped CeF(3) nanoparticles emitted bright green (Tb(3+)), blue (Dy(3+)) and white (triply doped) luminescence upon host excitation. Composites of poly methyl methacrylate (PMMA) and poly vinyl alcohol (PVA) were made with CeF(3): 5.0 mol%Tb(3+), CeF(3): 5.0 mol% Dy(3+) and triply doped white light emitting composition. The CeF(3)/PMMA (PVA) nanocomposite films, so obtained, are highly transparent (in the visible spectral range) and exhibit strong photoluminescence upon UV excitation.     

Highly Luminescent and Thermally Stable Lanthanide Coordination Polymers Designed from 4-(Dipyridin-2-yl)aminobenzoate: Efficient Energy Transfer from Tb(3+) to Eu(3+) in a Mixed Lanthanide Coordination Compound

Herein, a new aromatic carboxylate ligand, namely, 4-(dipyridin-2-yl)aminobenzoic acid (HL), has been designed and employed for the construction of a series of lanthanide complexes (Eu(3+) = 1, Tb(3+) = 2, and Gd(3+) = 3). Complexes of 1 and 2 were structurally authenticated by single-crystal X-ray diffraction and were found to exist as infinite 1D coordination polymers with the general formulas {[Eu(L)(3)(H(2)O)(2)]}(n) (1) and {[Tb(L)(3)(H(2)O)].(H(2)O)}(n) (2). Both compounds crystallize in monoclinic space group C2/c. The photophysical properties demonstrated that the developed 4-(dipyridin-2-yl)aminobenzoate ligand is well suited for the sensitization of Tb(3+) emission (Φ(overall) = 64%) thanks to the favorable position of the triplet state ((3)ππ*) of the ligand [the energy difference between the triplet state of the ligand and the excited state of Tb(3+) (ΔE) = (3)ππ* - (5)D(4) = 3197 cm(-1)], as investigated in the Gd(3+) complex. On the other hand, the corresponding Eu(3+) complex shows weak luminescence efficiency (Φ(overall) = 7%) due to poor matching of the triplet state of the ligand with that of the emissive excited states of the metal ion (ΔE = (3)ππ* - (5)D(0) = 6447 cm(-1)). Furthermore, in the present work, a mixed lanthanide system featuring Eu(3+) and Tb(3+) ions with the general formula {[Eu(0.5)Tb(0.5)(L)(3)(H(2)O)(2)]}(n) (4) was also synthesized, and the luminescent properties were evaluated and compared with those of the analogous single-lanthanide-ion systems (1 and 2). The lifetime measurements for 4 strongly support the premise that efficient energy transfer occurs between Tb(3+) and Eu(3+) in a mixed lanthanide system (η = 86%).