Iron promotion of V‐HMS mesoporous catalysts for ultra‐deep oxidative desulfurization

Bimetallic Fe‐V‐HMS (HMS, hexagonal mesoporous silica) catalysts with various molar ratios of iron to vanadium were synthesized using a co‐synthesis method, and investigated for oxidative desulfurization of dibenzothiophene (DBT) using tert‐butyl hydroperoxide as an oxidant. The catalysts were characterized using X‐ray diffraction, temperature‐programmed desorption of ammonia, Fourier transform infrared spectroscopy and N₂ physical adsorption–desorption techniques. The Fe‐V‐HMS catalyst with a 2:1 molar ratio of iron to vanadium exhibited the highest total acidity and the highest catalytic activity. DBT was almost completely oxidized to dibenzothiophenesulfone, a species with a higher polarity that could be subsequently adsorbed on the Fe‐V‐HMS, and therefore the Fe‐V‐HMS acts as both a catalyst and an adsorbent simultaneously. The desulfurization rate was 98.1%. A pseudo‐first‐order model was fitted to the experimental data, and the activation energy was found to be 38.79 kJ mol^?1. The encouraging performance of Fe‐V‐HMS offers the prospect of the design of a one‐pot oxidative desulfurization process without needing extraction of sulfones from fuel oil with a chemical solvent.     

Half‐sandwich ruthenium‐based versatile catalyst for both alcohol oxidation and catalytic hydrogenation of carbonyl compounds in aqueous media

A series of half‐sandwich ruthenium‐based catalysts for both alcohol oxidation and carbonyl compounds hydrogenation have been synthesized through metal‐induced C–H bond activation based on benzothiazole ligands. The neutral ruthenium complexes 1 – 4 were fully characterized by UV–vis, NMR, IR, and elemental analysis. Molecular structures of complexes 1 and 3 were further confirmed by X‐ray diffraction analysis. All complexes exhibited high activity for the catalytic oxidation of a variety of alcohols with ^tBuOOH as oxidants to give carbonyl compounds with high yields in water. Moreover, these half‐sandwich complexes also showed high efficiency for the catalytic hydrogenation of carbonyl compounds in a methanol–water mixture. The catalyst could be reused for at least five cycles without any loss of activity. The catalytic system also worked well for various kinds of substrates with either electron‐donating or electron‐withdrawing groups.     

SBA‐15‐supported N‐coordinate ruthenium(II) materials bearing sulfonamide‐type ligands: Effect of ligand backbones on catalytic transfer hydrogenation of ketones and aldehydes

[RuLCl(p ‐cymene)] (L = N ‐arylsulfonylphenylenediamine) complexes ( 2 _{a – d} ) were synthesized from the reaction between [Ru(p ‐cymene)Cl₂]₂ and ligand. Additionally, SBA‐15–[RuLCl(p ‐cymene)] derived catalysts ( 3 _{a – d} ) were successfully immobilized onto mesoporous silica (SBA‐15) by an easily accessible approach. The structural elucidations of 2 _{a – d} and 3 _{a – d} were carried out with various methods such as ¹H NMR, ¹³C NMR and infrared spectroscopies, elemental analysis, thermogravimetric/differential thermal analysis, nitrogen adsorption–desorption and scanning electron microscopy/energy‐dispersive X‐ray analysis. The Ru(II) complexes and materials were found to be highly active and selective catalysts for the transfer hydrogenation (TH) reaction of aldehydes and ketones. The influence of various 1,2‐phenylenediamines on the reactivity of the catalysts (complexes or materials) was studied and the catalysts ( 2 _d and 3 _d ) with a 4,5‐dichlorophenylenediamine substituent showed the best activity (the maximum turnover frequencies are 2916 and 2154 h⁻¹ for TH of 4‐fluoroacetophenone, and 6000 and 4956 h⁻¹ for TH of 4‐chlorobenzaldehyde).     

Six‐coordinated vanadium(IV) complexes with tridentate task‐specific ionic liquid Schiff base ligands: Synthesis,characterization and effect of ionic nature on catalytic activity

By reaction of 5‐(chloromethyl)salicylaldehyde with triphenylphosphine and N‐methylimidazole in two separate reactions, salicylaldehydetriphenylphosphonium chloride (S²) and salicylaldehydemethylimidazolinium chloride (S³) were prepared. Reaction of 2‐(aminomethyl)pyridine with these aldehydes resulted in the task‐specific ionic liquid Schiff base ligands L¹ and L², respectively. Then six‐coordinated vanadium(IV) Schiff base complexes of VO(acac)L^1–4 were synthesized by reactions of these tridentate Schiff base ligands and VO(acac)₂ in 1:1 stoichiometry. The aldehydes, ligands and VO(acac)L^1–4 complexes were characterized using infrared, ¹H NMR, ¹³C NMR, ³¹P NMR, UV–visible and mass spectroscopies, as well as elemental analysis. Paramagnetic property of the complexes was also studied using magnetic susceptibility measurements. The complexes were used as catalysts in epoxidation of cyclooctene and oxidation of methylphenyl sulfide and the reaction parameters were optimized. The effect of the ionic nature of the complexes was investigated in these oxidation reactions. The catalytic activity of the complexes could be varied by changing the ionic (cationic or anionic) character of VO(acac)L^1–4 catalysts in which counter anion variation showed a greater effect than cationic moiety variation.     

Copolymerization of ethylene with 1‐hexene promoted by novel multi‐chelated non‐metallocene complexes with imine bridged imidazole ligand

A series of novel bridged multi‐chelated non‐metallocene catalysts is synthesized by the treatment of N,N‐imidazole, N,N‐dimethylimidazole, and N,N‐benzimidazole with n‐BuLi, 2,6‐dimethylaniline, and MCl₄ (M = Ti, Zr) in THF. These catalysts are used for copolymerization of ethylene with 1‐hexene after activated by methylaluminoxane (MAO). The effects of polymerization temperature, Al/M molar ratio, and pressure of monomer on ethylene copolymerization behaviors are investigated in detail. These results reveal that these catalysts are favorable for copolymerization of ethylene with 1‐hexene featured high catalytic activity and high comonomer incorporation. The copolymer is characterized by ¹³C NMR, WAXD, GPC, and DSC. The results confirm that the obtained copolymer features broad molecular weight distribution (MWD) about 33–35 and high 1‐hexene incorporation up to 9.2 mol %, melting temperature of the copolymer depends on the content of 1‐hexene incorporation within the copolymer chain and 1‐hexene unit in the copolymer chain isolates by ethylene units. The homopolymer of ethylene has broader MWD with 42–46. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 417–424, 2010     

Synthesis and properties of poly(1‐naphthylacetylene) and poly(9‐anthrylacetylene)

Polymerizations of 1‐naphthylacetylene (1‐NA) and 9‐anthrylacetylene (9‐AA) by various transition metal catalysts were studied, and properties of the polymers were clarified. 1‐NA polymerized with WCl₆‐based catalysts to offer dark purple polymers in good yield. Especially, a binary catalyst composed of WCl₆ and Ph₃Bi gave a polymer with high molecular weight (M_w = 140×10³) and sufficient solubility in common solvents. The use of Mo and Rh catalysts, in contrast, resulted in the formation of insoluble red poly(1‐NA)s. 9‐AA gave insoluble polymers by both WCl₆‐ and MoCl₅‐based catalysts in moderate to good yields. Copolymerization of 9‐AA with 1‐NA by WCl₆–Ph₃Bi provided a soluble copolymer which exhibited the largest third‐order nonlinear optical susceptibilities (χ⁽³⁾(−3ω; ω, ω, ω) = 40×10⁻¹²) among all the substituted polyacetylenes synthesized so far. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 277–282, 1999     

Ultrahigh‐Loading Zinc Single‐Atom Catalyst for Highly Efficient Oxygen Reduction in Both Acidic and Alkaline Media

Atomically dispersed Zn–N–C nanomaterials are promising platinum‐free catalysts for the oxygen reduction reaction (ORR). However, the fabrication of Zn–N–C catalysts with a high Zn loading remains a formidable challenge owing to the high volatility of the Zn precursor during high‐temperature annealing. Herein, we report that an atomically dispersed Zn–N–C catalyst with an ultrahigh Zn loading of 9.33 wt % could be successfully prepared by simply adopting a very low annealing rate of 1° min^?1. The Zn–N–C catalyst exhibited comparable ORR activity to that of Fe–N–C catalysts, and significantly better ORR stability than Fe–N–C catalysts in both acidic and alkaline media. Further experiments and DFT calculations demonstrated that the Zn–N–C catalyst was less susceptible to protonation than the corresponding Fe–N–C catalyst in an acidic medium. DFT calculations revealed that the Zn–N₄ structure is more electrochemically stable than the Fe–N₄ structure during the ORR process.     

Dehydration of Castor Oil over NaHSO4/MCM‐41 Catalyst Modified by n‐Dodecyltriethoxysilane

n‐Dodecyltriethoxysilane (DTEOS) modified NaHSO₄/MCM‐41 catalysts (silanized catalysts) were synthesized by different impregnation sequences and evaluated in the liquid‐phase dehydration of castor oil. The samples were evaluated by X‐ray diffraction, nitrogen adsorption‐desorption, SEM, TEM, FT‐IR spectroscopy, XPS, ²⁹Si MAS NMR spectroscopy, contact angle measurements, NH₃‐TPD, and pyridine‐FT‐IR spectroscopy. The analyses demonstrated that silanization enhanced the hydrophobicity of the catalysts, and the impregnation sequence of silanized catalysts had a significant effect on the NaHSO₄ dispersion, surface area, acid distribution, and hydrophobicity of the silanized catalysts. The catalytic activity of the silanized catalysts was much higher than that of NaHSO₄/MCM‐41. Among the silanized catalysts, the catalyst prepared by simultaneous impregnation with DTEOS and NaHSO₄ showed the highest iodine value of 141.8 [g(I₂) per 100 g] and lowest hydroxyl value of 11.3 [mg(KOH) · g^–1].     

A Versatile Iron–Tannin‐Framework Ink Coating Strategy to Fabricate Biomass‐Derived Iron Carbide/Fe‐N‐Carbon Catalysts for Efficient Oxygen Reduction

The conversion of biomass into valuable carbon composites as efficient non‐precious metal oxygen‐reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel‐cell technology. Herein, a versatile iron–tannin‐framework ink coating strategy is developed to fabricate cellulose‐derived Fe₃C/Fe‐N‐C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron–tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe₃C/Fe‐N‐C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm^?2 and 32 mA mg^?1 at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam.     

Synthesis and Spectroscopic Characterization of New Double‐Armed Benzo‐15‐Crown‐5 Derivatives and Their Sodium Complexes

Double‐armed crown ether aldehydes ( 1–3 ) were synthesized from the reaction of 2 equiv salicylaldehyde, 4‐hydroxy‐3‐methoxybenzaldehyde (vanillin), and 3‐hydroxy‐4‐methoxybenzaldehyde (iso‐vanillin) with 4′,5′‐bis(bromomethyl)benzo‐15‐crown‐5. New crown ethers imine compounds ( 4–9 ) were synthesized by the condensation of corresponding crown ether aldehydes ( 1–3 ) with 4‐amino‐1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3H‐pyrazole‐3‐one and 2‐furan‐2‐yl‐methylamine. Sodium complexes ( 1a–9a) of the crown compounds form crystalline 1:1 (Na⁺:ligand) stoichiometries and were also synthesized. The structures of the crown ether aldehydes ( 1–3 ), imine compounds ( 4–9 ), and complexes ( 1a–9a ) were confirmed on the basis of elemental analyses, IR, ¹H and ¹³C NMR, and mass spectrometry. © 2013 Wiley Periodicals, Inc. Heteroatom Chem 24:100–109, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21070     

Molecular modeling on the prediction of silolene‐bridged indenyl metallocene catalysts for isotactic polypropylene

Two new silolene‐bridged metallocenes for isotactic polypropylene, racemic (1,4‐butanediyl) silylene‐bis (1‐η⁵‐2‐methyl‐indenyl) dichlorozironium and racemic diphenyl silylene‐bis (1‐η⁵‐2‐methyl‐indenyl) dichlorozironium, were designed in terms of the mechanism and concept of the activity and selectivity of metallocenes. The predictions on which the designs were based were carried out for four metallocene catalysts through molecular modeling methods such as molecular mechanics and charge equilibrium. In a comparison of the data from three of the catalysts that were successfully synthesized, the predicted orders of the activity and selectivity were consistent. This shows that classical methods such as charge equilibrium are useful in predicting the activity of catalysts. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2232–2238, 2000     

Novel isolated,L‐amino acid‐ligated rhodium catalysts that induce highly helix‐sense‐selective polymerization of an achiral 3,4,5‐trisubstituted phenylacetylene

Two novel chiral well‐defined rhodium complexes, Rh(cod)(L‐Phe) (cod = 1,5‐cyclooctadiene, Phe = phenylalanine) and Rh(cod)(L‐Val) (Val = valine) were synthesized, isolated by recrystallization, and characterized. The helix‐sense‐selective polymerization (HSSP) of an achiral 3,4,5‐trisubstituted phenylacetylene, p‐dodecyloxy‐m,m‐dihydroxyphenylacetylene (DoDHPA) was examined by using the two Rh complexes as catalysts. These catalysts provided high molecular weight polymers (M_w 28 × 10⁴?45 × 10⁴) in about 40%–85% yields. The resulting polymers exhibited a bisignated CD signal at about 300 nm and a broad signal around 470 nm, indicating that they have preferential one‐handed helical structure. The present catalysts achieved larger molar ellipticity up to [θ]₃₁₀ = 13.0 × 10⁴ deg cm²/dmol than those with binary chiral catalytic systems, [Rh(cod)Cl]₂/(L‐phenylalaninol), [Rh(cod)Cl]₂/(L‐valinol), and [Rh(nbd)Cl]₂/(R)‐PEA. All these results manifest that the present, well‐defined Rh complexes serve as excellent catalysts for the HSSP of DoDHPA. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2346–2351     

Catalytic Aerobic Oxidation of Biomass‐based Furfural into Maleic Acid in Aqueous Phase with Metalloporphyrin Catalysts

Catalytic oxidation of renewable furfural into valuable maleic acid in aqueous solutions using metalloporphyrin catalysts was investigated for the first time. The synthesized catalysts were characterized by FT‐IR , UV –vis, ¹H NMR , elemental analysis, and TGA . The catalysts varied in metal active sites and functional groups, which had different effects on their catalytic activity. Furthermore, the effects of temperatures, reaction time, catalyst loading, and oxygen pressure were studied in detail. Maleic acid could be achieved in 44% yield by using FeT (p‐Cl)PPCl as catalyst under optimal conditions. Finally, FeT (p‐Cl)PPCl could be reused in five consecutive runs without a significant loss of activity.     

Non‐Oxidative Methane Conversion Using Lead‐ and Iron‐Modified Albite Catalysts in Fixed‐Bed Reactor

Raw and modified albite catalysts, including Pb/Albite and Fe/Albite catalysts, have been investigated for methane conversion to C₂ hydrocarbons under non‐oxidative conditions. Introduction of Pb to albite improved the activity and selectivity to non‐coke products. Based on characterization, it was found that Pb entered into the alkali and alkaline‐earth metal sites of albite, while partial Fe doped in the tetrahedron sites and the other loaded on the surface of albite. At the reaction temperature of 1073 K, methane gas hourly space velocity (GHSV) of 2 L·gcat^–1·h^–1, catalyst dosage of 0.25 g (300 mesh), the methane conversion catalyzed by raw albite in the fixed‐bed micro reactor exhibited a methane conversion of 3.32%. Notably, introducing a Pb content of 3.4 wt% into albite greatly enhanced the conversion of methane up to 8.19%, and the selectivity of C₂ hydrocarbons reached 99% without any coke under the same reaction conditions. While Fe‐doping could weakly heighten the methane conversion to 3.97%, and coke was formed. Thus, a comparison of Pb/Albite and Fe/Albite catalysts demonstrates that the catalytic activity of albite is mainly decided by alkali and alkaline‐earth metal sites, and lead‐modification can effectively improve the catalytic activity of albite.     

Synthesis and characterization of iron‐ and nitrogen‐functionalized graphene catalysts for oxygen reduction reaction

Iron‐ and nitrogen‐functionalized graphene (Fe‐N‐G), as well as iron‐ and nitrogen‐functionalized oxidized graphene (Fe‐N‐Gox) catalysts were synthesized as non‐noble metal electrocatalysts for oxygen reduction reaction (ORR). The physical properties of the resultant catalysts were characterized using nitrogen adsorption measurements, X‐ray diffraction, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy. Subsequently, ORR activities of the catalysts were determined electrochemically using a conventional three‐electrode cell via cyclic voltammetry with a rotating disc electrode, the results of which indicated that the synthesized catalysts had a marked electrocatalytic activity towards ORR in acid media. Among the synthesized catalysts, that functionalized using 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine as nitrogen source had the highest electrocatalytic activity with the highest onset potential (0.98 V/SHE) and limiting current density (5.12 mA cm⁻²). The findings are particularly important to determine a non‐precious metal catalyst for ORR activity in fuel cells.     

High‐Performance Electrocatalytic Activity of Palladium‐Copper Nanoalloy towards Methanol Electro‐oxidation in an Alkaline Medium

Nanoalloy of PdCu were synthesized with three different stoichiometry ratio (3 : 1, 1 : 1, 1 : 3) by simple co‐reduction process at 5 °C with Triton X‐100 as surface modifier. Morphology and composition of the synthesized catalyst were characterized by X‐ray diffraction (XRD), X‐ray photo electron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscope (TEM), energy dispersive X‐ray analysis (EDAX) with selected area electron diffraction (SAED) techniques. Electrocatalytic activity and stability of the catalysts towards methanol oxidation reaction were verified in alkaline medium by cyclic voltammetry (CV) and chronoamperometry (CA). Observed results emphasis that PdCu nanoalloy in the 3 : 1 stoichiometric ratio shows better catalytic activity (778.98 mA mg⁻¹) and stability not only in the initial state (93.73 mA mg⁻¹) but also after 1800 s (8.61 mA mg⁻¹) among all other prepared catalysts.     

Polymer supported copper(II) amine‐imine complexes in the C‐N and A3 coupling reactions

New polymer supported Cu(II) complexes based on an epoxy functionalized gel type resin were prepared using the multi‐stage procedures. The reactions of epoxy groups with ethylenediamine or tris(2‐aminoethyl)amine, and then NH₂ groups with salicylaldehydes were used for the preparation of a series of amine‐imine functionalized polymer supports. Copper(II) acetate was used as a source of metal ions. The complexes were characterized using ICP‐OES, FTIR, DR UV–Vis and TGA techniques, and tested as catalysts in two model C‐N and a series of A³ coupling reactions. Their catalytic activity was rather low in the C‐N coupling reactions between imidazole and iodobenzene or phenylboronic acid. However, the second of the reactions could be conducted effectively under milder conditions. The complexes were efficient used as recyclable catalysts in the A³ coupling reactions. A series of aromatic aldehydes and secondary amines and phenylacetylene could be coupled using 1% mol catalyst.     

Advanced Catalytic Performance of Au–Pt Double‐Walled Nanotubes and Their Fabrication through Galvanic Replacement Reaction

Bimetallic tubular nanostructures have been the focus of intensive research as they have very interesting potential applications in various fields including catalysis and electronics. In this paper, we demonstrate a facile method for the fabrication of Au–Pt double‐walled nanotubes (Au–Pt DWNTs). The DWNTs are fabricated through the galvanic displacement reaction between Ag nanowires and various metal ions, and the Au–Pt DWNT catalysts exhibit high active catalytic performances toward both methanol electro‐oxidation and 4‐nitrophenol (4‐NP) reduction. First, they have a high electrochemically active surface area of 61.66 m² g^?1, which is close to the value of commercial Pt/C catalysts (64.76 m² g^?1), and the peak current density of Au–Pt DWNTs in methanol oxidation is recorded as 138.25 mA mg^?1, whereas those of Pt nanotubes, Au/Pt nanotubes (simple mixture), and commercial Pt/C are 24.12, 40.95, and120.65 mA mg^?1, respectively. The Au–Pt DWNTs show a markedly enhanced electrocatalytic activity for methanol oxidation compared with the other three catalysts. They also show an excellent catalytic performance in comparison with common Au nanotubes for 4‐nitrophenol (4‐NP) reduction. The attractive performance exhibited by these prepared Au–Pt DWNTs can be attributed to their unique structures, which make them promising candidates as high‐performance catalysts.     

Zeolite‐Encaged Single‐Atom Rhodium Catalysts: Highly‐Efficient Hydrogen Generation and Shape‐Selective Tandem Hydrogenation of Nitroarenes

Single‐atom catalysts are emerging as a new frontier in heterogeneous catalysis because of their maximum atom utilization efficiency, but they usually suffer from inferior stability. Herein, we synthesized single‐atom Rh catalysts embedded in MFI ‐type zeolites under hydrothermal conditions and subsequent ligand‐protected direct H₂ reduction. C_s‐corrected scanning transmission electron microscopy and extended X‐ray absorption analyses revealed that single Rh atoms were encapsulated within 5‐membered rings and stabilized by zeolite framework oxygen atoms. The resultant catalysts exhibited excellent H₂ generation rates from ammonia borane (AB) hydrolysis, up to 699 min^?1 at 298 K, representing the top level among heterogeneous catalysts for AB hydrolysis. The catalysts also showed superior catalytic performance in shape‐selective tandem hydrogenation of various nitroarenes by coupling with AB hydrolysis, giving >99 % yield of corresponding amine products.     

Titanium tetrachloride supported on atom transfer radical polymerized poly(methyl acrylate‐co‐1‐octene) as catalyst for ethylene polymerization

Ethylene polymerizations were performed using catalyst based on titanium tetrachloride (TiCl₄) supported on synthesized poly(methyl acrylate‐co‐1‐octene) (PMO). Three catalysts were synthesized by varying TiCl₄/PMO weight ratio in chlorobenzene resulting in incorporation of titanium in different percentage as determined by UV‐vis spectroscopy. The coordination of titanium with the copolymer matrix was confirmed by FTIR studies. The catalysts morphology as observed by SEM was found to be round shaped with even distributions of titanium and chlorine on the surface of catalyst. Their performance was evaluated for atmospheric polymerization of ethylene in n‐hexane using triethylaluminum as cocatalyst. Catalyst with titanium incorporation corresponding to 2.8 wt % showed maximum activity. Polyethylenes obtained were characterized for melting temperature, molecular weight, morphology and microstructure. The polymeric support utilized for TiCl₄ was synthesized using activators regenerated by electron transfer (ARGET) Atom Transfer Radical Polymerization (ATRP) of methyl acrylate (MA) and 1‐octene (Oct) with Cu(0)/CuBr₂/tris(2‐(dimethylamino)ethyl)amine (Me₆TREN) as catalyst and ethyl 2‐bromoisobutyrate (EBriB) as initiator at 80 °C. The copolymer poly(methyl acrylate‐1‐octene; PMO) obtained showed monomodal curve in Gel Permeation Chromatography (GPC) with polydispersity of 1.37 and copolymer composition (¹H NMR; F_MA) of 0.75. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7299–7309, 2008