Novel alkyl-modified anionic siloxanes as pseudostationary phases for electrokinetic chromatography: II. Selectivity studied by linear solvation energy relationships.

Anionic, water-soluble siloxane polymers modified with different lengths of alkyl chains have very different selectivity than sodium dodecyl sulfate (SDS) micelles when used as pseudostationary phases in electrokinetic chromatography. The siloxanes in this study are random copolymers with side chains bearing sulfonate groups and alkyl groups (C8, C12, or C18), with the proportion of alkyl groups between 10 and 25% of the total. The differences in selectivity have been studied by linear solvation energy relationships (LSERs). The siloxanes in general have been found to be more cohesive, less polar, more able to interact with solutes through n- and pi-electrons, and more able to accept hydrogen bonds than SDS micelles, while the ability to act as hydrogen bond donors is not significantly different than SDS micelles. In addition, the performance in a pH 7.0 Tris buffer has been investigated and the siloxanes were found to have higher methylene selectivities and more variable electrophoretic mobilities than in borate buffers.     

Alkyl modified anionic siloxanes as pseudostationary phases for electrokinetic chromatography. I. Synthesis and characterization

Anionic water soluble siloxane polymers have been synthesized and characterized for electrokinetic chromatography. Siloxane polymers are of interest in electrokinetic chromatography because of the wide variety of chemistries that can be developed based on these backbones, including much of the stationary phase chemistry developed in the last 30 years. The siloxanes in this study have a sulfonate functional group. The siloxanes have different length alkyl chains (C8, C12, C18) attached to the backbone in differing densities. The methylene selectivity generally increases with increasing alkyl chain length and with increasing alkyl chain density. The electrophoretic mobility appears to pass through a maximum as more alkyl chain is added to the siloxane backbone. The efficiency also would seem to pass through a maximum as more alkyl chain is added. The chemical selectivities of the siloxane polymers are very different from sodium dodecyl sulfate but are similar to each other.     

Synthesis and characterization of novel anionic siloxane polymers as pseudostationary phases for electrokinetic chromatography

Four novel siloxane polymeric pseudostationary phases with three different ionic head groups have been synthesized and characterized for electrokinetic chromatography. Siloxane polymers are of interest in this application because of the wide range of chemistries that can be developed based on these backbones, including much of the chromatographic stationary phase chemistry developed in the last thirty years. All four of the siloxanes studied were synthesized by modification of a single methylhydrosiloxane polymer with highly acidic anionic functionalities. One of the siloxanes had both ionic groups and alkane chains attached to the siloxane backbone. The electrophoretic mobilities varied from being somewhat less than sodium dodecyl sulfate (SDS) to being much greater than SDS. The siloxanes substituted with ionic groups at all of the silicon sites showed significant nonequilibrium band broadening, severely limiting the efficiencies of these polymers. Substitution of 20% of the silicon sites with an alkyl group improved the efficiency of the separations and the peak symmetry. The chemical selectivities of the siloxane polymers are very different from SDS, but are similar to each other.     

Comparison of monolithic silica and polymethacrylate capillary columns for LC

Organic polymer monolithic capillary columns were prepared in fused-silica capillaries by radical co-polymerization of ethylene dimethacrylate and butyl methacrylate monomers with azobisisobutyronitrile as initiator of the polymerization reaction in the presence of various amounts of porogenic solvent mixtures and different concentration ratios of monomers and 1-propanol, 1,4-butanediol, and water. The chromatographic properties of the organic polymer monolithic columns were compared with those of commercial silica-based particulate and monolithic capillary and analytical HPLC columns. The tests included the determination of H-u curves, column permeabilities, pore distribution by inversed-SEC measurements, methylene and polar selectivities, and polar interactions with naphthalenesulphonic acid test samples. Organic polymer monolithic capillary columns show similar retention behaviour to chemically bonded alkyl silica columns for compounds with different polarities characterized by interaction indices, Ix, but have lower methylene selectivities and do not show polar interactions with sulphonic acids. The commercial capillary and analytical silica gel-based monolithic columns showed similar selectivities and provided symmetrical peaks, indicating no significant surface heterogeneities. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra-column contributions. With 0.3 mm ID capillary columns, corrections for extra-column volume contributions are sufficient, but to obtain true information on the efficiency of 0.1 mm ID capillary columns, the experimental bandwidths should be corrected for extra-column contributions to peak broadening.     

Hygroscopic growth of self-assembled layered surfactant molecules at the interface between air and organic salts

We report here the self-assembly of surfactant molecules at the interface of air and the hygroscopic quaternary ammonium salt tetrabutylammonium acetate (TBAAc). Homogeneously dissolved surfactant molecules at 100 degrees C self-assemble upon contacting air due to high moisture adsorption by the organic salt when cooling down. Highly ordered lamellar phases with different lattice spacings have been observed when surfactants with various lengths of alkyl chains were used. C(n)TMAB/TBAAc systems showed all-trans conformation of interior methylene carbons and interdigited bilayers with an average CH2 increment of 0.119 nm, while C(n)NH2/TBAAc systems showed trans/gauche mixed conformations of interior methylene carbons and bilayers with an average CH2 increment of 0.247 nm. C(n)NH2s in C(n)NH2/TBAAc formed bilayers through water-mediated intermolecular hydrogen bonds with a water layer thickness of 0.51-0.61 nm. In C(n)TAB/TBAAc, as the head group of C(n)TAB is bigger, the interdigited bilayer thickness (d-spacing) is smaller, because the bigger head groups accommodate enough space for alkyl tails to come in between them.     

Melting of saturated fatty acid zinc soaps

The melting of alkyl chains in the saturated fatty acid zinc soaps of different chain lengths, Zn(C(n)H(2n+1)COO)(2); n = 11, 13, 15, and 17, have been investigated by powder X-ray diffraction, differential scanning calorimetry, and vibrational spectroscopy. These compounds have a layer structure with the alkyl chains arranged as tilted bilayers and with all methylene chains adopting a planar, all-trans conformation at room temperature. The saturated fatty acid zinc soaps exhibit a single reversible melting transition with the associated enthalpy change varying linearly with alkyl chain length, but surprisingly, the melting temperature remaining constant. Melting is associated with changes in the conformation of the alkyl chains and in the nature of coordination of the fatty acid to zinc. By monitoring features in the infrared spectra that are characteristic of the global conformation of the alkyl chains, a quantitative relation between conformational disorder and melting is established. It is found that, irrespective of the alkyl chain length, melting occurs when 30% of the chains in the soap are disordered. These results highlight the universal nature of the melting of saturated fatty acid zinc soaps and provide a simple explanation for the observed phenomena.     

Stationary phase effects in reversed-phase chromatography II. Substituent selectivities for retention on various hydrocarbonaceous bonded phases

Summary Linear free-energy relationships are manifest in the linear dependence of the logarithmic retention factor on the carbon number for homologous series in reversedphase chromatography and allow the comparison of the free-energy increments of substituents for retention of a given elute by different stationary phases. Three methods were used for such comparison. In the first two, methylene group selectivities obtained from retention data obtained with homologous series on different hydrocarbonanceous bonded phases were compared by using different approaches. In the third method the energetics of retention of the end groups such as phenyl-, bromo- and disulfide-moieties of homologous series were examined. The results show that at fixed mobile phase composition and temperature the free energy increments due to methylene groups upon retention by alkyl-silica stationary phases are identical. Only hydrocarbonaceous bonded phases with short (C₁–C₂) alkyl chains or functional groups of unusual shape show consistent differences from octyl- or octadecyl-silicas. The results broaden the theoretical basis for the development of quantitative structure-retention relationships to be used for the prediction or interpretation of retention data in reversed-phase chromatography.Part I: ref. [23]Dedicated to Professor István Halász for his six tieth birthday.     

Conformational order of n-alkyl modified silica gels as evaluated by Fourier transform infrared spectroscopy

The conformational behaviour of non-deuterated and selectively deuterated alkyl modified silica gels in the dry state is examined by variable temperature FT IR spectroscopy. In the present study, three systems are considered, which are distinguished by the length of the tethered alkyl chains (C9Hl9-, C18H37-, C22H45-). The desired information is obtained by the analysis of various conformational-sensitive IR bands, including CH2 wagging, CD2 stretching and CD2 rocking bands. The analysis of the CH2 wagging bands provides the relative amounts (i.e., integral numbers over the whole chain) of the kink/gauche-trans-gauche, double-gauche and end-gauche conformers in the tethered alkyl chains. From the analysis of the CD2 stretching and CD2 rocking bands information about the conformational order at a specific deuterated methylene segment is available. Here, the CD2 rocking band data are used to determine the amount of gauche conformers at the deuterated carbon positions C-4 and C-6, and C-12. It is found that the conformational order critically depends on the actual alkyl chain length, chain position and sample temperature. Particular emphasis is given to the impact of the external pressure during sample preparation on the alkyl chain conformations, about which so far no information is available. It is observed that the samples prepared as KBr pellets, which experienced a pressure of about 10 kbar, are characterised by a lower amount of gauche conformers. This substantial increase of conformational order is attributed to better alkyl chain packing along with a gain of intermolecular chain interactions.     

Reactions at interfaces: oxygenation of n-butyl ligands anchored on silica surfaces with methyl(trifluoromethyl)dioxirane

The oxygenation of n-butyl and n-butoxy chains bonded to silica with methyl(trifluoromethyl)dioxirane (1) revealed the ability of the silica matrix to release electron density toward the reacting C(2)-H σ-bond through the Si-C(1) and Si-O(1) σ-bonds connecting the alkyl chain to the surface (silicon β-effect). The silica surface impedes neither the alkyl chain adopting the conformation required for the silicon β-effect nor dioxirane 1 approaching the reactive C(2) methylene group. Reaction regioselectivity is insensitive to changes in the solvation of the reacting system, the location of organic ligands on the silica surface, and the H-bonding character of the silica surface. Reaction rates are faster for those organic ligands either within the silica pores or bonded to hydrophilic silica surfaces, which evidence the enhanced molecular dynamics of confined dioxirane 1 and the impact of surface phenomena on the reaction kinetics. The oxygenation of n-butyl and n-butoxy chains carrying trimethylsilyl, trimethoxysilyl, and tert-butyl groups with dioxirane 1 under homogeneous conditions confirms the electronic effects of the silyl substituents and the consequences of steric hindrance on the reaction rate and regioselectivity. Orthosilicic acid esters react preferentially at the methylene group adjacent to the oxygen atom in clear contrast with the reactivity of the carboxylic or sulfonic acid alkyl esters, which efficiently protect this position toward oxidation with 1.     

梳状高分子烷基侧链构象和堆积结构的红外光谱研究

以正十九烷和两种接枝烷基链的梳状高分子N-十八烷基聚乙烯亚胺(PEI18C)、N-十八烷基聚对苯甲酰胺(PBA18C)为研究对象,利用红外光谱对处于受限和自由状态的烷基链的构象和堆积结构随温度的变化进行了对比研究.结果表明,处于受限和自由状态的烷基链的构象排列和堆积结构及其转变行为不同,且受限于柔性PEI主链和刚性PBA主链的烷基链也不相同.从主链刚性的角度,探讨了影响烷基侧链构象和堆积结构的原因.     

Characterization of polymer monolithic stationary phases for capillary HPLC

Monolithic capillary columns have been prepared in fused‐silica capillaries by radical co‐polymerization of ethylene dimethacrylate and butyl methacrylate in the presence of porogen solvent mixtures containing various concentration ratios of 1‐propanol, 1,4‐butanediol, and water with azobisisobutyronitrile as the initiator of the polymerization reaction. The through pores in organic polymer monolithic columns can be characterized by “equivalent permeability particle size”, and the mesopores with stagnant mobile phase by “equivalent dispersion particle size”. Increasing the concentration of propanol in the polymerization mixture diminishes the pore volume and size in the monolithic media and improves the column efficiency, at a cost of decreasing permeability. Organic polymer monolithic capillary columns show similar retention behaviour to packed alkyl silica columns for compounds with different polarities characterized by interaction indices, I_x, but have different methylene selectivities. Higher concentrations of propanol in the polymerization mixture increase the lipophilic character of the monolithic stationary phases. Best efficiencies and separation selectivities were found for monolithic columns prepared using 62–64% propanol in the porogen solvent mixture. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra‐column contributions.     

Arrangement, conformation, and mobility of surfactant molecules intercalated in montmorillonite prepared at different pillaring reagent concentrations as studied by solid-state NMR spectroscopy

The arrangement, conformation, and mobility of dodecyltrimethylammonium cations (DDTMA+) intercalated in montmorillonite prepared with different pillaring reagent concentrations have been studied by 13C relaxation time measurement, cross-polarization dynamics, and two-dimensional proton wide-line separation (2D WISE) spectroscopy, as well as X-ray powder diffraction (XRD). We demonstrate that the arrangement of DDTMA+ and the mobility of various groups are different, depending on the pillaring concentration, but the conformations of alkyl chains are similar. XRD experiments illustrate that at three different pillaring concentrations (DDmt0.2, DDmt0.5, and DDmt1.0), the organic cations adopt a lateral-monolayer, lateral-monolayer, and pseudotrilayer arrangement, respectively. 13C MAS NMR reveals that the alkyl chains at the three concentrations uniformly display a large amount of mixed trans and gauch conformation (disordered) and a small amount of trans conformation (ordered). 13C spin-lattice relaxation time and 1H-13C cross-polarization dynamics measurement, along with 2D WISE NMR experiments, indicate that the mobility is much different for various groups at a given concentration and for a given group at different concentrations. At each concentration N-methyl unusually possesses the highest mobility, even exceeding that of the terminal methyl; at different concentrations the N-methyl and terminal methyl in DDmt1.0 exhibit the highest mobility compared with the other two samples.     

The structure of mixed nonionic surfactant monolayers at the air-water interface: the effects of different alkyl chain lengths

The structure of mixed nonionic surfactant monolayers of monodecyl hexaethylene glycol (C10E6) and monotetradecyl hexaethylene glycol (C14E6) adsorbed at the air-water interface has been determined by specular neutron reflectivity. Using partial isotopic labeling (deuterium for hydrogen) of the alkyl and ethylene oxide chains of each surfactant, the distribution and relative positions of the chains at the interface have been obtained. The packing of the two different alkyl chain lengths results in structural changes compared to the pure surfactant monolayers. This results in changes in the relative positions of the alkyl chains and of the ethylene oxide chains at the interface. The role of the alkyl chain length is contrasted with that of the ethylene oxide chain length, determined from results reported previously on the nonionic surfactant mixture of monododecyl triethylene glycol (C12E3) and monododecyl octaethylene glycol (C12E8).     

Study of photocrosslinkable polysiloxanes bearing gem di-styrenyl groups: Synthesis and thermal properties

The synthesis of photocrosslinkable polysiloxanes containing gem di-oxaalkylene styrenyl groups and gem di-urethane-α-methyl styrenyl groups has been performed by copolycondensation of α,ω-dihydroxy polydimethyl siloxanes and dichlorosilanes bearing either cyclic acetal groups or Si-H groups (onto which the cyclic acetal groups are further added) and dichlorosilanes bearing alkyl groups. The introduction of styrenyl groups was then achieved by hydrolysis of the acetal groups into the corresponding alcohols followed by reaction with chloromethyl styrene or with 3-isopropenyl-α,α- dimethylbenzyl isocyanate.The structure of the different products synthesized was determined by IR, ¹H, ¹³C and ²⁹Si NMR spectroscopies. The thermal properties of the polysiloxanes bearing gem di-styrenyl groups have been studied at low and high temperatures.These products have been crosslinked under UV, in the presence of a cationic photoinitiator, and showed very good release paper properties.     

不对称Gemini表面活性剂在气/液界面的吸附动力学

合成出由1个亚甲基联接羟基和季铵基头基, 且带两根不同长度烷烃链的不对称Gemini表面活性剂CmH2m+1OCH2CH(OH)CH2N+(CH3)2C8H17Br(记为CmOhpNC8, m=10, 12, 14). 用最大泡压法研究了浓度低于临界胶团浓度时, CmOhpNC8在气/液界面上的吸附动力学. 结果表明, CmOhpNC8表现出很明显的吸附动力学效应. CmOhpNC8向新鲜气/液界面吸附时由扩散过程控制; 当界面上已具有一定吸附量时, 显示出吸附能垒Ea. 随着烷烃链的增长而明显降低, 表明长烷烃链的分子到达亚层后更容易插入表面层,这被归结为分子烷烃链间的疏水相互作用随着链增长而增强所致.     

Comparison of retention on traditional alkyl, polar endcapped, and polar embedded group stationary phases

The development of new RP stationary phases containing polar groups has provided the chromatographer with a variety of stationary phase choices with differing selectivities. Polar endcapped and polar embedded group stationary phases have found use in solving a wide variety of separation problems, especially for the efficient separation of organic bases as well as separations necessitating the use of highly aqueous mobile phases. In this report, the retention thermodynamics of small, nonpolar solutes on traditional alkyl, polar endcapped, and polar embedded group stationary phases are compared. It is found that the nonpolar (methylene) transfer enthalpy is less favorable when polar embedded group phases are used, when compared to traditional or polar endcapped phases. In contrast, the transfer enthalpy of a phenyl group is found to be more favorable when a polar endcapped phase is used. In addition, the retention characteristics of these phases are compared using a set of solutes with differing solvatochromic parameters. Hydrogen-bond acids appear to have enhanced retention on polar embedded group phases, while hydrogen-bond bases have enhanced retention on polar endcapped phases.     

Mechanisms of thermal decomposition of organic monolayers grafted on (111) silicon

The thermal stability of different organic layers on silicon has been investigated by in situ infrared spectroscopy, using a specially designed variable-temperature cell. The monolayers were covalently grafted onto atomically flat (111) hydrogenated silicon surfaces through the (photochemical or catalytic) hydrosilylation of 1-decene, heptadecafluoro-1-decene or undecylenic acid. In contrast to alkyl monolayers, which desorb as alkene chains around 300 degrees C by the breaking of the Si-C bond through a beta-hydride elimination mechanism, the alkyl layers functionalized with a carboxylic acid terminal group undergo successive chemical transformations. At 200-250 degrees C, the carboxyl end groups couple forming anhydrides, which subsequently decompose at 250-300 degrees C by loss of the functional group. In the case of fluorinated alkyl chains, the C-C bond located between CH2 and CF2 units is first broken at 250-300 degrees C. In either case, the remaining alkyl layer is stable up to 350 degrees C, which is accounted for by a kinetic model involving chain pairing on the surface.     

Photochromism of novel molybdate/alkylamine composite thin films.

Novel inorganic/organic composite films of molybdates with photochromic properties have been prepared by self-assembly using alkylammonium ions as a supramolecular template. Both 1-hexadecylammonium/polyoxomolybdate (C16-Mo) and 1-octadecylammonium/polyoxomolybdate (C18-Mo) composite films have been successfully fabricated. The elemental analysis and thermal gravimetric analysis show that the main product in the C16-Mo film was (C16H33NH3)4Mo8O26. The X-ray diffraction (XRD) results indicate that the composite films were lamellar in nature. The IR, Raman and X-ray photoelectron spectroscopy (XPS) results show that the polyoxomolybdate anions present as MoO6 octahedra and that the Mo species exists as Mo6+ in the freshly prepared films. The alkyl chains in the 1-hexadecylammonium chains were linear and the alkyl groups are an all-trans configuration. Upon UV irradiation of the C16-Mo films, some Mo6+ was reduced to Mo5+, some -NH3+ became -NH2 with a concomitant increase in the concentration of -OH groups on the molybdate moieties, and the films were colored. Thus, the photochromism of the films involves the reduction of Mo6+ to Mo5+, coupled with a proton transfer from 1-hexadecylammonium ions to an oxygen atom at the Mo site. In contrast to thin films of transition-metal oxides, which all show photochromism in the blue region of the electromagnetic spectrum, these composite films show photochromism in the violet region with the greatest absorbance change at 472 nm.     

Interfacial properties of free-standing poly(3-hexylthiophene) films

Using full atomistic classical molecular dynamics simulations, the interfacial properties of free-standing poly(3-hexylthiophene) (P3HT) films have been investigated. The orientations of different parts of the P3HT chain and the surface tensions of the films were calculated in a temperature range of 540 K-600 K. At the liquid/vacuum interface, the P3HT chain shows ordering by exposing hexyl groups at the interface, while the chain backbone lays flat with the thiophene ring preferentially tilt toward the surface. At the interface, the terminal methyl groups of hexyl side chains are in excess compared to the methylene groups or thiophene rings. The surface tension of P3HT in its melt state shows similar temperature dependence to that of polymers that have long alkyl side chains. The surface tension values are comparable to those polymers that expose methyl or methylene groups on the surface. The surface tension values determined for the melt state are lower than the experimental reported values for crystalline P3HT films, as expected.