Distance resolution of the scanning acoustic air microscope

In this paper the experimental results concerning the distance resolution measurements performed with the air microscope operating with a focussing transducer at 1.27 MHz are presented. A distance resolution of 3 nm has been achieved, corresponding to the average distance between two molecules in air at normal conditions. The influence of air temperature variations on the distance measurements has been taken into account.     

偶氮染料掺杂的聚甲基丙烯酸甲酯薄膜的热光性质研究

本文演示了用阿贝折射仪测定染料掺杂聚合物薄膜热光系数的方法;通过改变掺杂体含量的方法,方便地实现了聚合物体系的折射率控制;通过热光系数的测量,计算了聚合物薄膜的热膨胀系数,并用以解释了聚合物薄膜的热光系数随掺杂体含量增加先增大后减小的实验观察.     

Extremely low density self-assembled InAs/GaAs quantum dots

The self-assembled InAs/GaAs quantum dots (QDs) with extremely low density of 8×106 cm-2 are achieved using higher growth temperature and lower InAs coverage by low-pressure metal-organic chemical vapour deposition (MOVCD). As a result of micro-photoluminescence (micro-PL), for extremely low density of 8×106 cm-2 InAs QDs in the micro-PL measurements at 10 K, only one emission peak has been achieved. It is believed that the InAs QDs have a good potential to realize single photon sources.     

Diffusion Measurement in Phantoms and Tissues Using SLIM Localization

A new approach to efficient localized diffusion measurements has been developed and evaluated on phantoms and isolated tissues. The combination of a diffusion-sensitive pulse sequence with SLIM (spectral localization by imaging) makes efficient and accurate localized water and metabolite diffusion measurements possible with a substantial improvement in spatial or time resolution compared to standard methods. Phantom experiments showed that diffusion of substances present in relatively low concentration within small compartments can be measured accurately by this method, suggesting potential applications for diffusion measurements of metabolitesin vivo.Experiments on excised rat uterine horns demonstrated the ability of this method to measure localized diffusion of water within irregularly shaped regions of biological samples. Accurate diffusion measurements were achieved in the localized regions with acquisition times less than would have been required by standard diffusion imaging methods.     

Near-infrared laser operation of Cr3+ centers in chromium-doped LiInGeO4 and LiScGeO4 crystals

Laser action has been demonstrated in two new tunable Cr3+-doped crystals. Absorption, emission, and excitation measurements for various crystal orientations have been performed for chromium-doped LiInGeO4 and LiScGeO4 single crystals. From the spectroscopic measurements, two optical active centers were identified: tetrahedrally coordinated Cr4+ and octahedrally coordinated Cr3+. Gain-switched, tunable laser operation of Cr3+ centers has been demonstrated in both crystals. An ultrawide tuning range from 1150 to 1480 nm for LiInGeO4 and 1220-1380 nm for LiScGeO4 has been achieved. To our knowledge this is the widest bandwidth and the most near-infrared shifted wavelength range for lasing ever demonstrated for Cr3+ ions.     

A method of measuring the refractive index of extraordinary ray in uniaxial crystal with optic axis at an arbitrary orientation

A new equation to measure the refractive index of extraordinary ray in uniaxial crystal with the optic axis at an arbitrary orientation has been given in this letter, and the term in this equation makes the measurements to be relatively easy. The theoretical study shows that the accuracy achieved in the experiments attains to the order of magnitude in 10-3.     

Two Ways of Robust Quantum Dialogue by Using Four-Qubit Cluster State

In this paper, we present a scheme for quantum dialogue by using a four-qubit cluster state as quantum channel.The scheme has two cases: Case 1, Sender Alice and receiver Bob share information using an orderly sequence of entangled state as quantum channel which was prepared by Alice. This case is achieved as follows: The two sides agreed to encode quantum state information, then Alice perform a bell state measurement for quantum information which has been encoded. This will convey the information to Bob, then Bob measuring his own qubits, through the analysis of the measurement results of Alice and Bob, Bob can obtain quantum information. For case 2, four-qubit cluster state and quantum state information is transmitted to form a total quantum system. In the Case 2 scenario, Alice and Bob perform bell state measurements for part of the qubits, and tell the measurement result to each other through the classical channel. Finally, according to the measurement result, Alice and Bob operate an appropriate unitary transformation, as a result, Alice’s qubit will be renewed upon Bob’s measurements, and also, Bob’s qubit will be renewed upon Alice’s measurements. Thus, a bidirectional quantum dialogue is achieved. After analysis, this scheme has high security by taking certain eavesdropping attacks into account. There is therefore a certain reference value to the realization of quantum dialogue.     

Applications of cavity ring-down spectroscopy to high precision isotope ratio measurement of 13C/12C in carbon dioxide

Recent measurements of carbon isotopes in carbon dioxide using near-infrared, diode-laser-based cavity ring-down spectroscopy (CRDS) are presented. The CRDS system achieved good precision, often better than 0.2 per thousand, for 4% CO2 concentrations, and also achieved 0.15-0.25 per thousand precision in a 78 min measurement time with cryotrap-based pre-concentration of ambient CO2 concentrations (360 ppmv). These results were obtained with a CRDS system possessing a data rate of 40 ring-downs per second and a loss measurement of 4.0 x 10(-11) cm(-1) Hz(-1/2). Subsequently, the measurement time has been reduced to under 10 min. This standard of performance would enable a variety of high concentration (3-10%) isotopic measurements, such as medical human breath analysis or animal breath experiments. The extension of this ring-down to the 2 microm region would enable isotopic analysis at ambient concentrations, which, combined with the small size, robust design, and potential for frequent measurements at a remote site, make CRDS technology attractive for remote atmospheric measurement applications.     

Detection of moisture content in high-purity ammonia by means of diode-laser spectroscopy

The aim of this work was the development of an as-simple-as-possible instrument for trace moisture concentration measurements in high-purity ammonia. A near-infrared diode-laser-based instrument has been applied to measure the humidity in a process of on-line detection of water in ammonia during industrial purification. The results of water concentration measurements were compared with alternative techniques (primarily dew-point detection) and good agreement was achieved. The long-term sensitivity of such a diode-laser-based instrument was estimated to be 5 ppm. The calculation of the water concentration from measurements of the integrated volume of water contained in the heavy fraction, extracted during the purification process, yields an even lower detection limit of less than 0.1 ppm, depending on the initial ammonia purity. PACS 42.55.Px; 42.62.Cf; 42.62.Fi     

Dual-broadband CARS temperature measurements in hydrogen-oxygen atmospheric pressure flames

Dual-broadband coherent anti-Stokes Raman scattering (CARS) spectroscopy of the Q₀₁-branch of H₂ has been employed for thermometry in an atmospheric-pressure hydrogen-oxygen flame. The aim was to investigate the applicability of the technique for single-shot temperature evaluation and to analyse the precision of the measurements. The results are presented of temperature and relative H₂ density mapping of the flame in the temperature range of 700-2800 K. The achieved precision of single-shot measurements was 3-5%.     

Correlation software algorithm for portable laser spectral analysis of heavy metal dopants

A novel correlation algorithm for laser spectral analyser (LSA) has been created for simultaneous determination of heavy metals' content in condensed matters, particularly in soils. This work is devoted to the design of a portable laser spectroscopy device for material contamination analysis using software with an original correlation algorithm. Detection sensitivity that can be achieved using this technique varies within 10–100 ppm. It has been demonstrated that acceptable results may be achieved during in-situ measurements. For a huge number of heavy metals, the limits of detection, which were determined experimentally with respect to unpolluted soil sample are lower. This system may provide fast in-situ analysis of heavy metal content and it uses optical fibre sensors.     

Sub-Rayleigh limit imaging via intensity correlation measurements

We demonstrate sub-Rayleigh limit imaging of an object via intensity correlation measurements. The image completely unaffected by the disturbance of diffraction-limit is achieved under the condition that the imaging system has an appropriate field of view. The resolution of this sub-Rayleigh limit imaging system is only tied to the lateral resolution of the illumination light.     

Diffusion changes precede size reduction in neoadjuvant treatment of breast cancer

Traditionally, tumor response has been assessed via tumor size measurements during the course of a treatment. However, changes in these morphologically based measures occur relatively late in the course of a treatment. Alternative biomarkers are currently being evaluated to enable an earlier assessment of treatment to facilitate early cessation and cost savings. Diffusion-weighted imaging (DWI) has been identified by preclinical studies to be a likely alternative to tumor size measurements. In this study, 10 patients were examined prior to and after the first and second chemotherapy cycle time points. Longest diameter tumor measurements and apparent diffusion coefficients (ADCs) were recorded at each exam. An increase in the mean (normalized) ADC was noted as early as the first cycle time point. However, a reduction in the mean (normalized) longest diameter was only noted at the second cycle time point. Significant alterations from the baseline value were noted for ADC at the first (P=.005) and second cycle time points (P=.004). Longest diameter measurements only achieved a borderline significance at the second time point (P=.057). These results indicate that DWI may provide a suitable biomarker capable of providing an indication of response to treatment prior to tumor size measurements.     

Selective analysis of molecular states by functionalized scanning tunneling microscopy tips

Selective analysis of molecular states in scanning tunneling microscopy (STM) has so far been achieved in a few cases by tuning the bias range of the STM in high-resolution measurements. Correspondingly, perylene adsorbed in a close-packed monolayer on Ag(110) is imaged mainly through the pi states of the molecule. By contrast, functionalizing the STM tip with a perylene molecule leads to a mismatch between the energy levels of the STM tip and the molecule adsorbates and, instead, images only the metal states of the underlying silver surface. The observation opens a route for better energy selectivity in electron transport measurements through organic interfaces.     

Experimental investigation of alternative pre-stress components for a 3-1 connectivity multilayer piezoelectric-polymer composite ultrasonic transducer

The most popular configuration for piezoelectric-polymer composites has pillars of piezoelectric ceramic supported by a polymer matrix and material with this structure is now widely available commercially. However, it has significant disadvantages for use in multilayer devices for non-mass-loaded operation below approximately 50 kHz. An alternative configuration is therefore reported here, in which interconnected fingers of piezoelectric ceramic surround polymer plates. This can be termed 3-1 connectivity, since the piezoceramic is fully connected in three dimensions and the polymer in only one. The configuration has been found to have significant manufacturing advantages which feed through to enhanced performance compared with practical 1-3 connectivity multilayer devices. For many potential applications, high-power operation is required, and it is unclear if the multilayer structure has sufficient internal strength to maintain its integrity at high strains. Therefore, an investigation has been carried out into alternative pre-stressing component designs. These comprise back and front stainless steel plates of different shapes, connected by a number of stainless steel rods. In this paper, the fundamental performance of a multilayer device is illustrated with electrical impedance and surface displacement measurements in air, without pre-stressing. Then measurements are reported from three different clamping configurations. It is shown that good results can be achieved at spot frequencies with a suitable clamp, but that unsuitable clamps prevent even this, and broadband performance is unlikely to be achieved easily.     

Tilted-pulse second-harmonic beam analysis for femtosecond to subnanosecond laser pulse-duration measurements

The possibility of extending the second-harmonic beam (SHB) method proposed originally for picosecond and subpicosecond pulse-duration measurements to the femtosecond region is pointed out. This can be achieved by introducing a differential time delay of the pulse wave front corresponding to a tilting of the pulse in the direction other than that applied by Wyatt and Marinero, and also by Saltiel et al., who achieved extensions towards the subnanosecond region. The solution of the wave equations for noncollinear second-harmonic generation in the case of arbitrarily tilted pulses has been carried out. Simple formulae valid from the subnanosecond to the femtosecond region are presented.     

Affleck-Kennedy-Lieb-Tasaki state on a honeycomb lattice is a universal quantum computational resource

Universal quantum computation can be achieved by simply performing single-qubit measurements on a highly entangled resource state, such as cluster states. The family of Affleck-Kennedy-Lieb-Tasaki states has recently been intensively explored and shown to provide restricted computation. Here, we show that the two-dimensional Affleck-Kennedy-Lieb-Tasaki state on a honeycomb lattice is a universal resource for measurement-based quantum computation.     

腔镜失调与面型误差对光束质量影响研究

 在准确测量腔镜面形加工精度的基础上，通过光学模拟软件ZEMAX实现了氧碘化学激光器折叠虚共焦非稳腔的光学建模，利用光腔模型进行了腔镜面形误差对光束质量影响的研究以及腔镜失调对光束波前影响的分析，在空腔的情况下利用调腔He-Ne激光进行了光束质量测量实验。实测结果与建模数据基本符合，验证了该方法的可行性。     

Amplitude modulation of submillimeter wave gyrotron output

Amplitude modulation of gyrotron by a small modulation of the anode voltage is calculated using an energy transfer formula. Experimental measurements using a submillimeter wave gyrotron are in good agreement. One hundred percent modulation of the output at frequencies up to several hundred kilohertz has been achieved with anode modulation levels of only a few percent. Numerical calculations lend further support to the experimental results.     

The quest for ozone intensities in the 9–11 μm region: A retrospective

We review efforts to experimentally determine absolute line intensities for ozone transitions in the 9–11 μm spectral region over the last several decades. Much of this work has been driven by the requirements for remote sensing of terrestrial atmospheric ozone. While significant progress has been achieved, discrepancies persist among various infrared measurements, and the relation between infrared and ultraviolet standards is not clearly resolved.