Recent Progress in LDH@Graphene and Analogous Heterostructures for Highly Active and Stable Photocatalytic and Photoelectrochemical Water Splitting

Photocatalytic (PC) and photoelectrochemical (PEC) water splitting is a plethora of green technological process, which transforms copiously available photon energy into valuable chemical energy. With the augmentation of modern civilization, developmental process of novel semiconductor photocatalysts proceeded at a sweltering rate, but the overall energy conversion efficiency of semiconductor photocatalysts in PC/PEC is moderately poor owing to the instability ariseing from the photocorrosion and messy charge configuration. Particularly, layered double hydroxides (LDHs) as reassuring multifunctional photocatalysts, turned out to be intensively investigated owing to the lamellar structure and exceptional physico-chemical properties. However, major drawbacks of LDHs material are its low conductivity, sluggish mass transfer and structural instability in acidic media, which hinder their applicability and stability. To surmount these obstacles, the formation of LDH@graphene and analogus heterostructures could proficiently amalgamate multi-functionalities, compensate distinct shortcomings, and endow novel properties, which ensure effective charge separation to result in stability and superior catalytic activities. Herein, we aim to summarize the currently updated synthetic strategies used to design heterostructures of 2D LDHs with 2D/3D graphene and graphene analogus material as graphitic carbon nitride (g-C₃N₄), and MoS₂ as mediator, or interlayer support, or co-catalyst or vice versa for superior PC/PEC water splitting activities along with long-term stabilities. Furthermore, latest characterization technique measuring the stability along with variant interface mode for imparting charge separation in LDH@graphene and graphene analogus heterostructure has been identified in this field of research with understanding the intrinsic structural features and activities.     

Insights into the photocatalytic mechanism of the C4N/MoS2 heterostructure: A first-principle study

Constructing heterostructures by combining COFs and TMD is a new strategy to design efficient photocatalysts for CO₂ reduction reaction (CO₂RR) due to their good stability, tunable band gaps and efficient charge separation. Based on the synthesis of completely novel C₄N−COF in our previous reported work, a new C₄N/MoS₂ heterostructure was constructed and then the related structural, electronic and optical properties were also studied using first principle calculations. The interlayer coupling effect and charge transfer between the C₄N and MoS₂ layer are systematically illuminated. The reduced band gap of the C₄N/MoS₂ heterostructure is beneficial to absorb more visible light. For the formation of type-II band alignment, a built-in electric field appears which separates the photogenerated electrons and holes into different layers efficiently and produces redox active sites. The band alignment of the heterostructure ensures its photocatalytic activities of the whole CO₂ reduction reaction. Furthermore, the charge density difference and charge carrier mobility confirm the existence of the built-in electric field at the interface of the C₄N/MoS₂ heterostructure directly. Finally, the high optical absorption indicates it is an efficient visible light harvesting photocatalyst. Therefore, this work could provide strong insights into the internal mechanism and high photocatalytic activity of the C₄N/MoS₂ heterostructure and offer guiding of designing and synthesizing COF/TMD heterostructure photocatalysts.     

The study of electronic and optical properties of ZnO/MoS2 and its vacancy heterostructures by first principles

Based on the first principles calculation, the effects of vacancies on the structural, electronic and optical properties of ZnO/MoS₂ heterostructure are investigated in this work. The results show that vacancies could exist stably in the heterojunctions and cause a significant decrease in bandgap. ZnO/MoS₂ with an O vacancy maintains semiconductor property with a bandgap of 0.119 eV, while heterostructure with a Zn vacancy exhibits metallic characteristic. Furthermore, the absorption capability of defective heterojunctions has been extended to infrared light region with obvious redshift. To sum up, vacancy engineering effectively changes the electronic and optical properties of ZnO/MoS₂ heterostructure, which provides a feasible approach for adjusting the optoelectronic properties of two-dimensional heterostructures and broadening their application in functional nanoelectronic and optoelectronic devices.     

Acceptor-Doping Accelerated Charge Separation in Cu2O Photocathode for Photoelectrochemical Water Splitting: Theoretical and Experimental Studies

Cu₂O is a typical photoelectrocatalyst for sustainable hydrogen production, while the fast charge recombination hinders its further development. Herein, Ni²⁺ cations have been doped into a Cu₂O lattice (named as Ni-Cu₂O) by a simple hydrothermal method and act as electron traps. Theoretical results predict that the Ni dopants produce an acceptor impurity level and lower the energy barrier of hydrogen evolution. Photoelectrochemical (PEC) measurements demonstrate that Ni-Cu₂O exhibits a photocurrent density of 0.83 mA cm⁻², which is 1.34 times higher than that of Cu₂O. And the photostability has been enhanced by 7.81 times. Moreover, characterizations confirm the enhanced light-harvesting, facilitated charge separation and transfer, prolonged charge lifetime, and increased carrier concentration of Ni-Cu₂O. This work provides deep insight into how acceptor-doping modifies the electronic structure and optimizes the PEC process.     

Dual-Functional Z-Scheme TiO2@MoS2@NC Multi-Heterostructures for Photo-Driving Ultrafast Sodium Ion Storage

Exploiting dual-functional photoelectrodes to harvest and store solar energy is a challenging but efficient way for achieving renewable energy utilization. Herein, multi-heterostructures consisting of N-doped carbon coated MoS₂ nanosheets supported by tubular TiO₂ with photoelectric conversion and electronic transfer interfaces are designed. When a photo sodium ion battery (photo-SIB) is assembled based on the heterostructures, its capacity increases to 399.3 mAh g⁻¹ with a high photo-conversion efficiency of 0.71 % switching from dark to visible light at 2.0 A g⁻¹. Remarkably, the photo-SIB can be recharged by light only, with a striking capacity of 231.4 mAh g⁻¹. Experimental and theoretical results suggest that the proposed multi-heterostructures can enhance charge transfer kinetics, maintain structural stability, and facilitate the separation of photo-excited carriers. This work presents a new strategy to design dual-functional photoelectrodes for efficient use of solar energy.     

WS2/MoS2 Heterostructures through Thermal Treatment of MoS2 Layers Electrostatically Functionalized with W3S4 Molecular Clusters

The preparation of 2D stacked layers combining flakes of different nature gives rise to countless numbers of heterostructures where new band alignments, defined at the interfaces, control the electronic properties of the system. Among the large family of 2D/2D heterostructures, the one formed by the combination of the most common semiconducting transition metal dichalcogenides, WS₂/MoS₂, has awakened great interest owing to its photovoltaic and photoelectrochemical properties. Solution as well as dry physical methods have been developed to optimize the synthesis of these heterostructures. Here, a suspension of negatively charged MoS₂ flakes is mixed with a methanolic solution of a cationic W₃S₄-core cluster, giving rise to a homogeneous distribution of the clusters over the layers. In a second step, a calcination of this molecular/2D heterostructure under N₂ leads to the formation of clean WS₂/MoS₂ heterostructures, where the photoluminescence of both counterparts is quenched, proving an efficient interlayer coupling. Thus, this chemical method combines the advantages of a solution approach (simple, scalable, and low-cost) with the good quality interfaces reached by using more complicated traditional physical methods.     

Enhanced photoelectrochemical performance of Bi2S3/Ag2S/ZnO novel ternary heterostructure nanorods

The current work investigates the morphology, crystallinity and photoelectrochemical (PEC) performance of bismuth sulfide/silver sulfide/zinc oxide nanorods (Bi₂S₃/Ag₂S/ZnO NRAs) photoelectrodes as prepared at different annealing temperature. ZnO NRAs was initially grown hydrothermally, deposited in sequence with Ag₂S and Bi₂S₃ via successive ionic layer adsorption and reaction (SILAR) method before undergoing the annealing treatment. The optimised photoelectrode (Bi₂S₃/Ag₂S/ZnO NRAs-400 °C) possesses an optical bandgap of 1.60 eV extending the absorption edge of ZnO to visible light spectrum. The current-voltage characterization of Bi₂S₃/Ag₂S/ZnO NRAs photoelectrodes revealed that the photocurrent density and photoconversion efficiency were strongly dependent on the annealing temperature. The PEC study shows that the photoelectrode annealed at 400 °C achieved impressive photocurrent density of 12.95 mA/cm² at +0.5 V (vs Ag/AgCl/saturated KCl) under 100 mW/cm² illumination with superior photoconversion efficiency of 12.63%. This improvement is due to the cascade-designed band structure alignment of Bi₂S₃/Ag₂S/ZnO/ITO and to the brilliant role of Ag₂S as an intermediate layer that reduced random chance of electron-hole (e⁻_-h⁺) pairs recombination and improved the electrons collection efficiency. This work is highly anticipated to give contribution on further utilisation of Bi₂S₃/Ag₂S/ZnO NRAs as a promising semiconductor material in PEC related applications.     

The role of interface in photo processes in photoconductive heterophase composites based on monolayer dispersions of molybdenum disulfide

Two-layer heterostructures with a high yield of charged current carriers were obtained and investigated. The heterostructures comprised monolayer dispersions of MoS₂ in polyvinyl alcohol as the lower layer and the upper p-, n-, or bipolar transport layer (TL). It was found that dark conductivity of the two-layer heterostructures increased considerably compared with the conductivity of reference samples based on TL but containing no MoS₂. After excitation from the TL side, maximum photoelectric sensitivity was obtained where TL long-wave absorption decreased and there was a high concentration of TL excited states at the interface that interacted with the surface of MoS₂ particles. This interaction quenched the luminescence of TL transport centers and led to the photogeneration of both positively and negatively charged current carriers at the interface. Luminescence quenching could be of 50–60% at high MoS₂ contents in the lower layer (90–100 wt %). This was evidence that the contact area of MoS₂ particles with the polymeric transport layer exceeded the geometric interface dimensions and the interface had a relief surface (was fairly thick). It was found that the donor-acceptor properties of both MoS₂ and the polymeric TL were very important for the photogeneration of charge carriers at the interface. When the MoS₂ content in the lower layer was maximum, the effectiveness of the accumulation of minority carriers increased because of the formation of an alternative transport network associated with MoS₂ particles. The conclusion was drawn that the photogeneration of charges at the interface resulted from the phototransfer of electrons between MoS₂ particles and TL excited states.     

Dual MOF-Derived MoS2/CdS Photocatalysts with Rich Sulfur Vacancies for Efficient Hydrogen Evolution Reaction

Cocatalyst plays an important role in efficient charge transfer and separation for photocatalysis. Herein, a MoS₂/CdS photocatalyst with MoS₂ as cocatalyst was designed by using Mo-MOF and Cd-MOF as precursors. Due to the existence of rich sulfur vacancies and 1T phase, MoS₂ shows strong charge capture and transport ability. The photo-generated electrons on conduction band (CB) can be bound by the sulfur vacancy of CdS and effectively transported to MoS₂ through the compact interface between the CdS nanoparticles and 2D large-scale MoS₂. The optimal photocatalyst 1 %MoS₂/CdS exhibited dramatically improved photocatalytic hydrogen production activity, which is 28 times that of pristine CdS and even about 2 times that of 1 %Pt/CdS with same loading amount of noble metal Pt. This work highlights the role of Mo-MOF derived MoS₂ with 1T-2H phases as a sustainable and prospective candidate of cocatalyst for improving charge separation and photocatalytic stability of MoS₂/CdS composites.     

Identifying Copper Vacancies and Their Role in the CuO Based Photocathode for Water Splitting

Metal oxides are an important family of semiconductors for effective photoelectrodes in solar‐to‐chemical energy conversion. Defect engineering, such as modification of oxygen vacancy density, has been extensively applied in tailoring the optoelectric properties of photoelectrodes. Very limited attention has been paid to the influence of metal vacancies. Herein, we study metal vacancies in a typical CuO photocathode for photoelectrochemical (PEC) water splitting. The Cu vacancies can improve the charge carrier concentration, and facilitate the charge separation and transfer in the CuO photocathode. By changing the O₂ partial pressure, the density of Cu vacancies can be tuned, which leads to improved PEC performance. The CuO photocathode prepared in pure O₂ exhibits a 100 % photocurrent increase compared to that prepared in air. The promotion effect of Cu vacancies on the PEC is also observed in other Cu based photocathodes, showing the generic role of metal vacancies in efficient photocathodes.     

Transition metal dichalcogenide thin films for solar hydrogen production

In the last three decades, transition metal dichalcogenides (TMDs) have been extensively studied for electronic, photonic, and energy applications. Different efforts are directed to find a holy grail of efficient and economically feasible materials that could be simple in production and available on a large scale. The interest in TMDs (MoS₂, WS₂, MoSe₂, WSe₂) stems from their suitable electronic structure for efficient solar light absorption and simple exfoliation technique of 2D crystallites due to the van der Waals bonding of these materials. This led to various designs and combinations of 2D single layers that could form heterojunctions and multijunctions for efficient light absorption, charge carrier generation/separation, and its transfer in optoelectronic and energy harvesting devices. Herein, TMD thin films are reviewed as photoelectrodes for solar hydrogen evolution and compared to that of other more developed materials.     

Two‐Dimensional Layered Heterostructures Synthesized from Core–Shell Nanowires

Controlled stacking of different two‐dimensional (2D) atomic layers will greatly expand the family of 2D materials and broaden their applications. A novel approach for synthesizing MoS₂/WS₂ heterostructures by chemical vapor deposition has been developed. The successful synthesis of pristine MoS₂/WS₂ heterostructures is attributed to using core–shell WO_3?x/MoO_3?x nanowires as a precursor, which naturally ensures the sequential growth of MoS₂ and WS₂. The obtained heterostructures exhibited high crystallinity, strong interlayer interaction, and high mobility, suggesting their promising applications in nanoelectronics. The stacking orientations of the two layers were also explored from both experimental and theoretical aspects. It is elucidated that the rational design of precursors can accurately control the growth of high‐quality 2D heterostructures. Moreover, this simple approach opens up a new way for creating various novel 2D heterostructures by using a large variety of heteronanomaterials as precursors.     

Lattice-matched in-situ construction of 2D/2D T-SrTiO3/CsPbBr3 heterostructure for efficient photocatalysis of CO2 reduction

The elaborate regulation of heterostructure interface to accelerate the interfacial charge separation is one of practicable approaches to improve the photocatalytic CO₂ reduction performance of halide perovskite (HP) materials. Herein, we report an in-situ growth strategy for the construction of 2D CsPbBr₃ based heterostructure with perovskite oxide (SrTiO₃) nanosheet as substrate (CsPbBr₃/SrTiO₃). Lattice matching and matchable energy band structures between CsPbBr₃ and SrTiO₃ endow CsPbBr₃/SrTiO₃ heterostructure with an efficient interfacial charge separation. Moreover, the interfacial charge transfer rate can be further accelerated by etching SrTiO₃ with NH₄F to form flat surface capped with Ti?O bonds. The resultant 2D/2D T-SrTiO₃/CsPbBr₃ heterostructure exhibits an impressive photocatalytic activity for CO₂ conversion with a CO yield of 120.2 ± 4.9 μmol g^?1 h^?1 at the light intensity of 100 mW/cm² and water as electron source, which is about 10 and 7 times higher than those of the pristine SrTiO₃ and CsPbBr₃ nanosheets, surpassing the reported halide perovskite-based photocatalysts under the same conditions.     

Simultaneous Tuning Band Gaps of Cu2O and TiO2 to Form S-Scheme Hetero-Photocatalyst

Photocatalytic Z or S scheme merits higher redox potentials and faster charge separation. However, heterostructure photocatalysts with band gaps of bulk materials often have a type I band structure leading to poor photocatalytic activity. In view of this, we report simultaneous tuning of band gaps of Cu₂O and TiO₂, where quantum dot Cu₂O nanoparticles were formed on doped TiO₂ with Ti³⁺. The reduced size of Cu₂O made its conduction band more negative, whereas the introduction of Ti³⁺ made the absorption edge red shift to the visible light region. The as-formed heterostructure enabled an S-Scheme mechanism with remarkable activity and stability for visible light photodegradation of 4-chlorophenol (4-CP). The as-obtained photocatalysts’ activity demonstrated ca. 510-fold increase as compared to individual ones and a mechanical blend. The as-obtained photocatalysts maintained over 80 % for 5 cycles and 2 months exposure to O₂ did not decrease the degradation rate. ESR characterization and scavenger experiments proved the S-Scheme mechanism.     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

偏压控制Cu2O和Cu在TiO2表面的生长及其光电化学性质

基于TiO₂/Ti 电极在含Cu²⁺溶液中的循环伏安图,调节电沉积的沉积电压,我们在TiO₂平整表面制备出Cu₂O和/或Cu颗粒. 通过扫描电镜（SEM）、X射线衍射（XRD）和X射线光电子能谱（XPS）表征,发现Cu₂O和Cu有不同的生长机制：Cu₂O颗粒在TiO₂表面分散结晶,而Cu颗粒是在已生长的颗粒上成核,从而形成堆积颗粒结构. 这是由于在Cu₂O/TiO₂界面和Cu/TiO₂界面形成不同的能带结构,使得电子的转移方式不同. 与纯TiO₂光阳极比较,可以观察到Cu₂O/TiO₂和Cu/TiO₂异质结构的光电流均有显著增强. 特别地,存在一个电压区间使得Cu₂O和Cu同时生长在TiO₂表面,此时对应的光电流比较稳定并且能达到最大. 紫外-可见（UV-Vis）漫反射光谱、电化学阻抗谱（EIS）和光电流-电压特性曲线均显示,Cu₂O和Cu明显有助于光的可见光吸收,同时Cu/TiO₂在光电转换过程中显示更宽波段的可见光利用率. 此外,开路电压的增加、有效的电荷分离和电极/电解质界面上载流子的快速迁移也增强了材料的光电化学性质.     

Electronic and optical properties of α‐MoO3/TiO2 heterostructures: A DFT study

The coupling of metal oxide semiconductors has become an effective method to improve the separation of photon‐generated carriers and light absorption efficiency. In this study, we explored electronic and optical properties of monolayer and bilayer α‐MoO₃ on TiO₂ (001) surface. It is observed that α‐MoO₃/TiO₂ heterostructures can form a stable Mo‐O‐Ti bonding mode at the interface. Electrons transfer from TiO₂ (001) surface to the α‐MoO₃, leading to the enhancement of the valence band and the optical absorption spectrum in visible light region. In addition, this proper charge transfer generates a built‐in electric field between the interface regions of bilayer α‐MoO₃/TiO₂ heterostructure and forms a favorable type‐II band alignment between the two α‐MoO₃ layers. The α‐MoO₃/TiO₂ heterostructure can prevent the recombination of the electron‐hole pairs; thus, excite electrons can easily move from TiO₂ to the inner layer, and then to the outer layer of α‐MoO₃. These results demonstrate that the bilayer α‐MoO₃/TiO₂ heterostructure, especially the outer layer α‐MoO₃, has efficient photoelectric performance.     

Metal-Organic Framework Glass Catalysts from Melting Glass-Forming Cobalt-Based Zeolitic Imidazolate Framework for Boosting Photoelectrochemical Water Oxidation

Sluggish oxygen evolution kinetics and serious charge recombination restrict the development of photoelectrochemical (PEC) water splitting. The advancement of novel metal–organic frameworks (MOFs) catalysts bears practical significance for improving PEC water splitting performance. Herein, a MOF glass catalyst through melting glass-forming cobalt-based zeolitic imidazolate framework (Co-a_gZIF-62) was introduced on various metal oxide (MO: Fe₂O₃, WO₃ and BiVO₄) semiconductor substrates coupled with NiO hole transport layer, constructing the integrated Co-a_gZIF-62/NiO/MO photoanodes. Owing to the excellent conductivity, stability and open active sites of MOF glass, Co-a_gZIF-62/NiO/MO photoanodes exhibit a significantly enhanced photoelectrochemical water oxidation activity and stability in comparison to pristine MO photoanodes. From experimental analyses and density functional theory calculations, Co-a_gZIF-62 can effectively promote charge transfer and separation, improve carrier mobility, accelerate the kinetics of oxygen evolution reaction (OER), and thus improve PEC performance. This MOF glass not only serves as an excellent OER cocatalyst on tunable photoelectrodes, but also enables promising opportunities for PEC devices for solar energy conversion.     

ZnO/ZnS Heterostructured Nanorod Arrays and Their Efficient Photocatalytic Hydrogen Evolution

Semiconducting heterostructures have been widely applied in photocatalytic hydrogen evolution due to their variable band gaps and high energy conversion efficiency. As typical semiconducting heterostructures, ZnO/ZnS heterostructured nanorod arrays (HNRAs) have been obtained through a simple anion‐exchange process in this work. Structural characterization indicates that the heterostructured nanorods (HNRs) are all composed of hexagonal wurtzite ZnO core and cubic zinc‐blende ZnS shell. As expected, the as‐obtained one‐dimensional heterostructures not only lower the energy barrier but also enhance the separation ability of photogenerated carriers in photocatalytic hydrogen evolution. Through comparisons, it is found that 1D ZnO/ZnS HNRAs exhibit much better performance in photocatalytic hydrogen evolution than 1D ZnO nanorod arrays (NRAs) and 1D ZnS NRAs. The maximum H₂ production is 19.2 mmol h^?1 for 0.05 g catalyst under solar‐simulated light irradiation at 25 °C and the corresponding quantum efficiency is 13.9 %, which goes beyond the economical threshold of photocatalytic hydrogen evolution technology.