Performance analysis of a nonlinear inerter-based vibration isolator with inerter embedded in a linkage mechanism

This study presents an inerter-based nonlinear vibration isolator with geometrical nonlinearity created by configuring an inerter in a diamond-shaped linkage mechanism. The isolation performance of the proposed nonlinear isolator subjected to force or base-motion excitations is investigated. Both analytical and alternating frequency-time harmonic balance methods as well as numerical integration method are used to obtain the dynamic response. Beneficial performance of the nonlinear isolator is demonstrated by various performance indices including the force and displacement transmissibility as well as power flow variables. It is found that the use of the nonlinear inerter in the isolator can shift and bend the peaks of the transmissibility and time-averaged power flow to the low-frequency range, creating a larger frequency band of effective vibration isolation. It is also shown that the inertance-to-mass ratio and the initial distance of the nonlinear inerter can be effectively tailored to achieve reduced transmissibility and power transmission at interested frequencies. Anti-resonant peaks appear at specific frequency, creating near-zero energy transmission and significantly reducing vibration transmission to a base structure on which the proposed isolator is mounted.

     

一种准零刚度系统隔振性能的几何参数优化分析

提出了一种采用菱形连杆组件作为负刚度机构的准零刚度隔振器(下文简称菱形准零刚度隔振器)。通过静力学分析方法,建立了菱形准零刚度隔振器数学模型,并与其他调节变量较少的隔振器模型进行了对比;以被测量曲线在隔振器平衡位置处的曲率作为评价参数,研究了负刚度机构几何参数对系统刚度、阻尼非线性的影响,推导了利用几何参数进行隔振优化的条件;采用谐波平衡法求解系统动力学方程,对隔振器在不同几何参数下的隔振性能进行了分析。结果表明:菱形准零刚度隔振器具有体积相对较小且非线性调节能力较好的特点,可通过调节杆长,或满足相关临界值条件时调节杆长偏差量(下文简称杆长差)对刚度及阻尼非线性特征进行优化;刚度与阻尼的非线性优化方向不同,但通常情况下,刚度非线性因素对隔振优化起主导作用;归一化振动相对位移小于0.1时,由刚度曲线曲率得到的临界值可以较好地作为杆长差参数的隔振优化调节依据。本文提出的非线性评价方法与几何非线性优化临界值计算方法,对于类似隔振器研究和设计具有一定的指导意义。     

A quasi-zero-stiffness isolator with a shear-thinning viscous damper

Quasi-zero-stiffness(QZS) vibration isolators have been widely studied,because they show excellent high static and low dynamic stiffnesses and can effectively solve low-frequency and ultralow-frequency vibration. However, traditional QZS(T-QZS)vibration isolators usually adopt linear damping, owing to which achieving good isolation performance at both low and high frequencies is difficult. T-QZS isolators exhibit hardening stiffness characteristics, and their vibration isolation performance is e...     

Influence of flexible solar arrays on vibration isolation platform of control moment gyroscopes

A high-performance vibration isolation platform (VIP) has been developed for a cluster of control moment gyroscopes (CMGs). CMGs have long been used for satellite attitude control. In this paper, the influence of flexible solar arrays on a passive multi-strut VIP of CMGs for a satellite is analyzed. The reasonable parameters design of flexible solar arrays is discussed. Firstly, the dynamic model of the integrated satellite with flexible solar arrays, the VIP and CMGs is conducted by Newton-Euler method. Then based on reasonable assumptions, the transmissibility matrix of the VIP is derived. Secondly, the influences of the flexible solar arrays on both the performance of the VIP and the stability of closed-loop control systems are analyzed in detail. The parameter design limitation of these solar arrays is discussed. At last, by selecting reasonable parameters for both the VIP and flexible solar arrays, the attitude stabilization performance with vibration isolation system is predicted via simulation.     

Dynamic design of a nonlinear energy sink with NiTiNOL-steel wire ropes based on nonlinear output frequency response functions

A novel vibration isolation device called the nonlinear energy sink(NES)with Ni Ti NOL-steel wire ropes(Ni Ti-ST) is applied to a whole-spacecraft system. The Ni Ti-ST is used to describe the damping of the NES, which is coupled with the modified Bouc-Wen model of hysteresis. The NES with Ni Ti-ST vibration reduction principle uses the irreversibility of targeted energy transfer(TET) to concentrate the energy locally on the nonlinear oscillator, and then dissipates it through damping in the NES with Ni Ti-ST.The generalized vibration transmissibility, obtained by the root mean square treatment of the harmonic response of the nonlinear output frequency response functions(NOFRFs),is first used as the evaluation index to analyze the whole-spacecraft system in the future.An optimization analysis of the impact of system responses is performed using different parameters of NES with Ni Ti-ST based on the transmissibility of NOFRFs. Finally, the effects of vibration suppression by varying the parameters of Ni Ti-ST are analyzed from the perspective of energy absorption. The results indicate that NES with Ni Ti-ST can reduce excessive vibration of the whole-spacecraft system, without changing its natural frequency. Moreover, the NES with Ni Ti-ST can be directly used in practical engineering applications.     

含机械调频式动力吸振器的准零刚度隔振系统隔振性能分析

基于动力吸振器原理,在单自由度准零刚度隔振器基础上耦合可调频动力吸振器构成两自由度隔振系统。首先,对动力吸振器工作原理进行理论分析并提出其力学模型;其次,通过静力学分析,推导出系统满足零刚度条件时,各参数间的关系并分析其对系统刚度特性的影响;然后,建立两自由度隔振系统非线性动力学方程,利用谐波平衡法进行幅频响应解析分析,得到力传递率表达式;最后,数值分析动力吸振器阻尼、刚度、质量、激励力幅值和弹簧片有效长度对力传递率的影响规律,并与单自由度准零刚度隔振系统及两自由度线性隔振系统对比分析。结果表明：通过选择适当的动力吸振器参数不仅可以减小系统的起始隔振频率,增宽隔振频带,且还能加快系统力传递率在特定频段内的衰减速率,改善系统的低频隔振性能,实现激励频率的可适应性。     

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

A geometric nonlinear damping is proposed and applied to a quasi-zero stiffness (QZS) vibration isolator with the purpose of improving the performance of low-frequency vibration isolation. The force, stiffness and damping characteristics of the system are presented first. The steady-state solutions of the QZS system are obtained based on the averaging method for both force and base excitations and further verified by numerical simulation. The force and displacement transmissibility of the QZS vibration isolator are then analysed. The results indicate that increasing the nonlinear damping can effectively suppress the force transmissibility in resonant region with the isolation performance in higher frequencies unaffected. In addition, the application of the nonlinear damping in the QZS vibration isolator can essentially eliminate the unbounded response for the base excitation. Finally, the equivalent damping ratio is defined and discussed from the viewpoint of vibration control.     

A high-static–low-dynamic-stiffness vibration isolator with the auxiliary system

High-static–low-dynamic-stiffness (HSLDS) vibration isolators seek to widen the frequency range of isolation by decreasing the dynamic stiffness so as to reduce the natural frequency, while maintaining the same static displacement as equivalent linear isolators. However, in many cases especially under light damping or large excitations, the peak transmissibility is very large and the hardening nonlinearity causes the transmissibility curve to bend to the right seriously or in other words causes the jump phenomenon, resulting in a greatly reduced isolation region. In this paper, an auxiliary system is added to the HSLDS isolator to overcome these disadvantages, with the static displacement of the isolation object remaining unchanged. Coefficient-varying harmonic balance method is proposed in this paper to find the dynamic response and most importantly analyze the stability of the steady-state response. The isolation performance of the HSLDS-AS isolator, which is evaluated by displacement transmissibility, is compared with that of the equivalent HSLDS isolator. The effects of system parameters on the isolation performance are investigated. It is shown that the auxiliary system can lower the peak transmissibility and eliminate the jump phenomenon, resulting in a wide isolation region, and the HSLDS-AS isolator has strong designability with many parameters tunable.     

几何非线性摩擦阻尼隔振系统动力学行为研究

非线性隔振系统由于具有较线性系统更优的隔振性能,因此在工程中应用广泛.本文通过配置与被隔振对象的运动方向相垂直的库伦摩擦阻尼器,构建了几何非线性摩擦阻尼模型.由于引入了几何非线性,因此其摩擦力与位移正相关,这与传统与位移无关摩擦力模型有显著不同.首先,建立了具有几何非线性摩擦阻尼的数学模型以及隔振系统的受迫振动方程;然后,使用谐波平衡法求解了动力学方程,并使用数值仿真方法验证了谐波平衡法求解的准确性;最后,研究了几何非线性摩擦阻尼隔振器的绝对位移传递率和相对位移传递率.研究结果表明,在库伦摩擦阻尼选择适当,非线性摩擦阻尼系统可以在保持高频振动衰减效果的前提下,显著降低系统共振峰,其性能优于传统的恒定摩擦阻尼隔振模型.同时,几何非线性摩擦阻尼系统能够避免传统摩擦阻尼系统中的“锁定”现象,从传递率角度来说,不利于共振峰控制;但从激励环境改变引发隔振系统失效的角度来看,几何非线性摩擦阻尼系统可以拓宽系统对激励幅值的适应范围,避免隔振系统失效.本文的研究结果对此类隔振系统的设计和摩擦阻尼参数的选择具有通用的指导意义.      

Analysis and design of the force and displacement transmissibility of nonlinear viscous damper based vibration isolation systems

This study is concerned with the analysis and design of the force and displacement transmissibility of nonlinear viscous damper based vibration isolation systems. Analytical algorithms are derived using the Ritz–Galerkin method to evaluate the transmissibility of SDOF displacement vibration isolation and force vibration isolation systems where a nonlinear viscous damper is used as an energy dissipating device. The results reveal that compared to linear dampers, nonlinear viscous dampers can more significantly improve the system vibration isolation performance in a wider frequency range. A procedure is then proposed based on the analysis results to facilitate the design of nonlinear viscous dampers for system vibration isolation purposes. These results have significant implications for the design of vibration isolation systems in many engineering applications.     

卫星减振的试验研究

根据某卫星发射对减振性能的要求,本文提出在适配器与星箭界面之间安装整星隔振器并且在适配器表面粘贴约束阻尼层的减振方案。并且利用振动台分别对卫星减振系统施加垂向和横向的基础激励,测量卫星上关键位置处的加速度响应,比较减振前后其频率响应特性的变化,以验证卫星减振方案的减振性能。试验结果的对比分析验证了此卫星减振系统能够隔离卫星高频段的横向和垂向振动,降低卫星结构频率响应的幅值,能够减小运载火箭发射时传递给卫星的环境载荷,提高卫星发射的可靠性。本文对于相关的航天器的减振设计具有实用的参考价值。     

Passive and active vibration isolation under isolator-structure interaction: application to vertical excitations

This work studies the influence of a vibration isolator on the response of a flexible base structure. Two strategies are compared: passive and active vibration isolation (PVI, AVI). Although the multiple advantages of AVI over PVI techniques are well known, their effect in the base structure has not to date been compared. This interaction has an important role in the performance of the general control system, especially when the vibration isolation system is not the only system on the base structure or when there are multiple isolators working simultaneously on it. In addition, the structural serviceability of the base structure can also be affected. The analysis of the vibration isolation problem is made from a wide perspective, including the effect that isolator has on the base structure. Hence assuming the base structure is a non-rigid system. The effect of the isolation system on the base response is studied for an extensive range of base structures, thus showing different possible scenarios. The influence is quantified by comparing the peak magnitude response of the base when both passive and active vibration isolation techniques are used. The theoretical results have been corroborated by undertaking experimental tests on a full-scale laboratory structure.

     

Dynamic analysis and performance evaluation of nonlinear inerter-based vibration isolators

This paper investigates a nonlinear inertance mechanism (NIM) for vibration mitigation and evaluates the performance of nonlinear vibration isolators employing such mechanism. The NIM comprises a pair of oblique inerters with one common hinged terminal and the other terminals fixed. The addition of the NIM to a linear spring-damper isolator and to nonlinear quasi-zero-stiffness (QZS) isolators is considered. The harmonic balance method is used to derive the steady-state frequency response relationship and force transmissibility of the isolators subjected to harmonic force excitations. Different performance indices associated with the dynamic displacement response and force transmissibility are employed to evaluate the performance of the resulting isolators. It is found that the frequency response curve of the inerter-based nonlinear isolation system with the NIM and a linear stiffness bends towards the low-frequency range, similar to the characteristics of the Duffing oscillator with softening stiffness. It is shown that the addition of NIM to a QZS isolator enhances vibration isolation performance by providing a wider frequency band of low amplitude response and force transmissibility. These findings provide a better understanding of the functionality of the NIM and assist in better designs of nonlinear passive vibration mitigation systems with inerters.     

带非线性弹簧的两自由度准零刚度隔振系统力传递率特性

基于多自由度系统中的反共振特性,分别在传统线性隔振系统的上、下两层引入非线性倾斜弹簧负刚度机构,构成两自由度准零刚度隔振器。通过静态特性分析,推导出系统满足零刚度条件时,各参数之间的关系,分析了力学参数及结构参数对系统刚度特性的影响。建立两自由度准零刚度隔振系统的非线性动力学方程,利用平均法求解,推导出力传递率表达式,结合数值分析方法,探讨系统在不同的上、下层隔振器阻尼比、竖直刚度比及质量比情况下的力传递率特性,并与单自由度准零刚度隔振系统及线性斜弹簧两自由度准零刚度隔振系统进行对比研究。结果表明：当结构参数 （即：倾斜弹簧处于静平衡位置的长度与倾斜弹簧原长的比值）较小且倾斜弹簧为软化弹簧时,可在平衡位置附近获得较小的系统刚度及较大的低刚度区间;通过选择适当的上、下层隔振器阻尼比、竖直刚度比与质量比,可减小系统的起始隔振频率,增宽隔振频带,加快系统力传递率在特定频段内的衰减速率,改善系统的低频隔振性能。     

Study on the force transmissibility of vibration isolators with geometric nonlinear damping

By a special layout of the damper in a vibration isolation system, the velocity-nth power damping of the damper can be transformed into the velocity-displacement dependent damping in the moving direction due to geometric nonlinearity. This study is mainly concerned with the mechanism of this geometric nonlinear damping and tries to find some guidelines for designing isolators with high performance, regardless of the isolator is passive or active. The model used in this study is an unconstrained two-degree-of-freedom isolation system, which is suitable for investigating vibration isolation in space vehicles. The motion equation is solved by the averaging method to obtain the amplitude–frequency equation. The influence of damping coefficients on the force transmissibility is analyzed. Results show that this kind of damping has some advantages in improving isolation performance at both the resonance and higher frequencies. Meanwhile, it can also degrade the isolation performance if unreasonable parameters are chosen.     

基于混杂双稳定层合板的准零刚度隔振装置

准零刚度隔振装置(quasi-zero stiffness,QZS)在其平衡位置处的刚度接近于零,能够有效地隔离加速度幅值较低的微振动.因此,准零刚度隔振装置在卫星等航天器结构的微振动抑制领域有较好的应用前景.准零刚度隔振装置通常由正刚度部件及负刚度部件并联而成.在众多准零刚度隔振装置概念中,负刚度部件通常需要多个弹性部件及特定约束边界形成负刚度特性,导致准零刚度隔振装置的整体质量及体积相对较大.然而,航天器结构对隔振装置的质量特性及安装空间提出较高要求,因此需开发新型准零刚度隔振装置,降低隔振装置的质量及体积以满足航天器结构的使用要求.本文提出了一种基于混杂双稳定复合材料层合板的准零刚度隔振装置.通过利用混杂双稳定复合材料层合板自身的负刚度特性,降低了准零刚度隔振装置的结构复杂程度.本文对提出的准零刚度隔振装置的力学原理进行说明,对其隔振效果进行了仿真分析,并进行了隔振效果验证试验.隔振试验表明,准零刚度隔振装置的振动传递率曲线不再具有峰值,其实际振动传递率低于具有相同正刚度的线性隔振系统.基于试验及仿真分析结果,本文对隔振装置隔振性能的影响因素进行了分析讨论.分析结果显示,隔震装置中线性弹簧刚度与双稳定层合板负刚度之间的差异以及微小装配误差将导致隔振装置的隔振效果出现降低.      

整星被动多杆隔振平台研究

整星振动隔离是降低作用于卫星的振动载荷的有效方法.本文了采用多杆隔振平台来实现整星隔振,利用牛顿欧拉法建立了考虑基础运动和支杆转动惯量的隔振平台的动力学模型,分析了平台放置刚性卫星和柔性卫星的振动传递率,分析结果表明隔振平台可以有效的隔离来自于基础的振动.     

反共振流体浮筏的隔振特性研究

基于反共振原理, 设计了一种新型的流体浮筏隔振器. 应用流体动量方程和结构振动理论推导了该隔振器的数学模型, 分析了其隔振特性, 得到了最优隔振频率和浮体浸入流体深度的关系式. 仿真结果表明, 当浮体浸入流体深度在有限的范围内变化时, 新型隔振器会在从低频到高频的宽带内发生反共振现象. 反共振条件下的力传递率可降至极低水平.流体浮筏隔振器具有很好的(尤其是低频)隔振效果.     

Reducing force transmissibility in multiple degrees of freedom structures through anti-symmetric nonlinear viscous damping

In the present study, the Volterra series theory is adopted to theoretically investigate the force transmissibility of multiple degrees of freedom (MDOF) structures, in which an isolator with nonlinear anti-symmetric viscous damping is assembled. The results reveal that the anti-symmetric nonlinear viscous damping can significantly reduce the force transmissibility over all resonance regions for MDOF structures with little effect on the transmissibility over non-resonant and isolation regions. The results indicate that the vibration isolators with an anti-symmetric damping characteristic have great potential to solve the dilemma occurring in the design of linear viscously damped vibration isolators where an increase of the damping level reduces the force transmissibility over resonant frequencies but increases the transmissibility over non-resonant frequency regions. This work is an extension of a previous study in which MDOF structures installed on the mount through an isolator with cubic nonlinear damping are considered. The theoretical analysis results are also verified by simulation studies.     

复杂激励下平置板式浮筏功率流传递特性研究

针对隔振理论研究领域中舰船的振动和噪声控制问题，建立六维^[1、2]平置板式弹性浮筏的多机组隔振理论分析计算模型，导出了弹性浮筏传递功率流的表达式，从振动能量传输的角度来评价浮筏系统隔振效果，绘制了功率谱曲线，揭示机组的布置，筏架刚度等结构参数对功率流传递的影响，给出了浮筏设计中结构参数选择的一般准则。