Synthesis and characterization of 7,16-dinicotinoyl- and 7,16-diisonicotinoyltetraaza[14]annulene and their nickel(II) and copper(II) complexes

The reaction of tetraaza[14]annulene and its complexes with nicotinoyl chloride hydrochloride and/or isonicotinoyl chloride hydrochloride produced the 7,16-dinicotinoylated and/or 7,16-diisonicotinoylated corresponding products in satisfactory yields. The mass spectra reveal the molecular ion peaks due to the 7,16-diacylated products. A strong ir band which is correlated with a C = 0 stretching mode is freshly observed in the 1635–1670 cm^?1 region upon the acylation. The electronic spectra for the complexes hardly change upon the acylation, but those for the ligands change slightly. The olefinic proton signals at the 7- and 16-positions disappear on the acylation in ¹H-nmr spectra and the substituted pyridine proton signals are newly observed. The proton nmr results are consistent with those of the carbon-13 nmr. The spin Hamiltonian parameters for the acylated copper(II) complexes are comparable with those for the copper(II) complex which is not acylated. The copper(II) complexes assume the square-planar coordinations with an unpaired electron in the d_x2_?y2 orbital.     

Synthesis and Crystal Structure of the Copper Complex of 7，16-Bis（2-hyd roxy-5-met hylbenzyl）-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane

A lariat crown ether ligand 7,16-bis (2-hydroxy-5-methylbenzyl)- 1,4,10,13-tetraoxa-7,16-diazacyclooctadeeane (L1) has been prepared via one-pot Mannich reaction. Its copper(Ⅱ) complex Cu-L1 was synthesized and characterized by elemental analysis, IR and UV-visible spectroscopy. The crystal structure of the complex has been determined by X-ray diffraction analysis. The result shows that the copper(Ⅱ) ion is six-coordinated by two nitrogen and four oxygen atoms, two from the crown ether and the other two from the deprotonated phenolate anions, forming an elongated octahedral complex. Electrochemical study indicates that the complex undergoes reversible reduction in DMF solution.     

Syntheses and crystal structures of copper complexes of 7,16-bis (5-t-butyl-2-hydroxybenzyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane

Reaction of the crown ether ligand H₂L (H₂L=7,16-bis (5-t-butyl-2-hydroxybenzyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane) with Cu(Ac)₂ and Cu(NO₃)₂ affords complexes 1 and 2, respectively, which are characterized by elemental analysis, IR and UV–Visible spectroscopy and X-ray diffraction. Both crystal structure analysis and spectroscopy study unexpectedly showed that the two side-arm p-tert-butylphenols of the original crown ether are converted to nitro p-tert-butylphenols in complex 2. In each complex the copper (II) ion is coordinated to two nitrogen and four oxygen atoms, two from the crown ether ring and other two from the deprotonated phenolate groups, which define an elongated octahedron. Electrochemical studies indicate that the two complexes undergo irreversible reduction in DMF solution.     

Synthesis and crystal structure of copper complex of 7,16-bis(2-hydroxy-5-methyl-3-nitrobenzyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane

A lariat crown ether compound 7,16-bis(2-hydroxy-5-methylbenzyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane has been prepared via one-pot Mannich reaction. A copper(II) complex with the ligand 7,16-bis(2-hydroxy-5-methyl-3-nitrobenzyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane was unexpectedly synthesized and characterized by elemental analysis, IR and UV spectra. The crystal structure of the complex has been determined by X-ray diffraction. Both crystal structure analysis and spectroscopy study indicated that the side-arm phenols of lariat crown ether are nitrated while complexing with Cu(NO₃)₂. Structure shows that the copper(II) ion is coordinated to two nitrogen and four oxygen atoms, two from the crown ether and other two from the deprotonated phenolate groups. The coordination polyhedron is a distorted octahedron.     

Charge-transfer triiodide ion-selective electrode based on 7,16-dibenzyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane.

A new PVC membrane electrode for the triiodide ion based on a charge-transfer complex of iodine with 7,16-dibenzyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane as a membrane carrier was prepared. The electrode exhibits a Nernstian response for triiodide ions over a wide concentration range (1.0 x 10(-1)-1.0 x 10(-5) M) with a slope of 59.3 +/- 0.9 mV decade(-1) and a detection limit of 6.3 x 10(-6) M. It has a response time of 30 s and can be used for at least 3 months without any divergence in the potential. The potentiometric response is independent of the pH, in the pH range 1.6 - 10.0. The proposed electrode has shown very high selectivity for the triiodide ion over a wide variety of other anions. This electrode was successfully applied as an indicator electrode in the potentiometric titration of ascorbic acid and hydroquinone from pharmaceutical preparations as well as ascorbic acid in orange juice and dissolved O2 in tap water.     

A total synthesis of (±)-gibberellin A12 via methyl (±)-7,16-dioxo-17-norkauran-19-oate

A formal total synthesis of (±)-gibberellin A₁₂ (1) was achieved by employing methyl (±)-7,16-dioxo-17-norkauran-19-oate (13) as a relay compound.     

Oxidation of (7,16-diethyl-5,6,7,8,9,14,15,16,17,18-decahydrodibenzo[b,i][1,4,8,11]tetraazacyclotetradecine)nickel(II) complexes

The oxidation reaction of two isomers of (7,16-diethyl-5,6,7,8,9,14,15,16,17,18-decahydrodibenzo[b,i]-[1,4,8,11]tetraazacyclotetradecine)nickel(II) diperchlorate and/or dichloride (NiL¹X₂ (X = ClO₄, Cl)) in methanol in air under atmospheric pressure leads to the production of (7,16-diethyl-5,6,7,8,9-pentahydrodibenzo-[b,i][1,4,8,11]tetraazacyclotetradecinato)nickel(II) complexes (NiL²X). Proton and ¹³C nmr spectra suggest that NiL²X is formed by partial oxidation from a macrocyclic skeleton of NiL¹X₂. The dehydrogenation of NiL¹X₂ does not occur at symmetric positions such as d- and k-positions of the macrocyclic skeleton but at unsymmetrical positions such as d- and f-positions. Treatment of NiL¹X₂ and/or NiL²X in a methanol solution with an excess of bases in air gives (7,16-diethyldibenzo[b,t][1,4,8,11]tetraazacyclotetradecinato)nickel(II) (NiL³).     

Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate)

The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR (¹H, ¹³C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant.     

Direct synthesis,spectral and magnetic properties of trans-aniono(1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7-acetato) copper(II) complexes

7-Carboxymethyl-7,16-diaza-18-crown-6 acid hydrates (LH·H₂O) and their copper(II) complexes [CuLX], (X = Cl, Br, NO₃, ClO₄ and CH₃CO₂) were obtained. The earlier X-ray investigation of the [CuLCl] complex, as well as the IR and UV-vis spectral evidence for the complexes revealed the inner chelate structure with the six-coordinated copper(II) ion embedded inside the macrocyclic ligand (deformed octahedral, 4+2, N,N, CO₂⁻,X⁻,O,O-coordination sphere) and the trans arrangement of the CO₂ and X ligands. The spectral data, the conductivity measurements and the chemical properties show the existence of the macrocyclic inclusion cation [CuL]⁺ and the formulation of the complexes as the [(CuL)⁺X⁻] inner salts. The magnetic moments of the complexes amount to 1.76–1.83 BM at room temperature and 1.3–0.92 BM at 4.2 K. These results revealed the monomeric form of the complexes with the occurrence of the intermolecular (through space) magnetic super-exchange interactions of copper(II) paramagnetic centres.     

Synthesis and spectroscopic properties for six 7,16-dibenzoylated tetraaza[14]annulene nickel(II) complexes

The condensation reaction between tetraaza[14]annulene nickel(II) complex and a series of para-substituted benzoyl chlorides gave the corresponding 7,16-dibenzoylated products in 53–98% yields. The mass spectra exhibit molecular ion peaks ascribed to the 7,16-dibenzoylated products. The intense ir band due to the C?O stretching mode in these nickel(II) complexes is present in the 1650–1658 cm^?1 range upon the benzoylation. Even though the ligand moiety of these six complexes is changed by benzoylation, the electronic spectra hardly vary. These nickel(II) complexes assume roughly the square-planar coordinations as judged by the ligand-field transition bands. The olefinic proton peaks at the 7- and 16-positions vanish on benzoylation in the proton nmr spectra and the proton signals of the para-substituted benzoyl groups are observed in the 2.4–8.4 ppm region. The results of the carbon-13 nmr spectra are compatible with those for the proton nmr spectra.     

The behavior of polyaniline-coated PVC membrane based on 7,16-didecyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane for ph measurements in highly acidic media

Polyaniline (PANI) chemically coated on polyvinylchloride (PVC) membrane based on a neutral carrier 7,16-didecyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (Kryptofix 22 DD) as the active component has been developed for determination of pH values ranging from pH 0.1–1. Effect of experimental parameters such as membrane composition, nature and amount of plasticizer, lipophilic additives and thickness of PANI film on the potential response of the pH electrode was investigated. The electrode has an apparent Nernstian response slope of 54.5 ± 0.4 mV/pH (at 20°C). The equilibrium water content of the electrode was determined in pure water and NaCl solution (I = 0.1 mol/kg). The electrode had low electric resistance, good potential stability and reproducibility (±1.5 mV, n = 10). It had a rapid potential response to changes of pH (15 s). The excellent performance in terms of linearity, stability and fast response makes this device suitable for pH measurements in highly acidic media.