Polarographic determination of nitramide

Nitramide gives two cathodic polarographic waves with half-wave potentials varying with pH, and having minimum values − 1·22 V at pH 4·5 and − 1·58 V at pH 8·8. Nitramide is fist reduced to nitrosamine in a two-electron reduction. In the second step, hydroxy-hydrazine may be formed in a two-electron reduction, or hydrazine itself in a four-electron step. For the polarographic determination of nitramide the first wave is used, and the supporting electrolyte is a Britton—Robinson buffer 0·1 M in KCl, at pH < 5 and at 0–2°.     

Electron transfer from cresols to N3, BrO2, ClO2, NO2 and SO4 radicals: correlation between rate constants and one-electron reduction potentials

The rate constants of oxidation of phenol and the cresol isomers to phenoxyl or methylphenoxyl radicals by inorganic radicals (R√) were studied in aqueous solutions at pH=5.8 and 11.5 using pulse radiolysis. The oxidation was due to electron transfer. Using the Marcus theory the electron transfer data were evaluated on the basis of the energy difference, ΔE, between the one-electron reduction potential of the inorganic couple and the mid-point potential of the half-cell of the phenoxyl/phenolate(phenol) couple. The standard reduction potentials of (o-CH₃PhO√/o-CH₃PhO⁻) and (m-CH₃PhO√/m-CH₃PhO⁻) couples (vs. NHE) were determined as 760 and 800 mV, respectively. The electron transfer was found to be diffusion limited when ΔE500 mV independently of the inorganic radical, type of phenol or pH. Between 0ΔE500 mV the rate constants showed good correlation with ΔE. The rate constants were dependent on the isomeric position of the methyl substituent.     

Detection of irradiated food by the changes in protein molecular mass distribution

Protein constituents were extracted from chicken drumstick and chicken white meat, separated according to the molecular mass (Mm), using discontinuous SDS–polyacrylamide electrophoresis (SDS–PAGE) and quantified by scanning densitometry. The obtained profiles were compared with the profiles corresponding to the meat samples which were irradiated at −20, +4, and +20°c. It was observed that the irradiation of chicken white meat led to protein scission which was partially unselective (e.g. the amount of proteins whose Mm>20 kDa decreased, while the amount of those whose Mm<20 kDa increased), and partially selective (e.g. the appearance of Mm16 kDa fragment). In the case of chicken drumstick meat the irradiation caused both protein scission and protein cross-linking (unselective and selective, and appearance of 16 kDa fragment). However, in the case of aerated dehydrated egg white proteins, irradiation led only to unselective protein scission. The obtained results are discussed in view of possible application of discontinuous analytical SDS–PAGE combined with laser scanning densitometry for detection of previously irradiated foodstuff.     

Raman scattering study of highly fluorinated graphite

Raman spectra of highly fluorinated C_xF samples (1<x<2) prepared at room temperature and 515°C were measured. C_xF samples prepared at room temperature exhibited two Raman bands at 1593–1583 and 1555–1542 cm⁻¹. Graphite samples fluorinated at 515°C for 1 and 2 min also gave similar bands at 1581–1580 and 1550–1538 cm⁻¹. However, graphite samples fluorinated from 15 min to 10 h at 515°C no longer showed such spectra. The Raman peaks shifted to lower frequencies with increasing fluorine concentration in C_xF. This trend is due to the weakening of the C---C bonds of the graphene layers. Observation of both kinds of Raman bands suggests the coexistence of two highly fluorinated phases, C₂F and C₁F, in the samples. The process of formation of graphite fluoride is discussed on the basis of the Raman spectra of C_xF samples obtained at 515°C.     

Organometallic complexes for nonlinear optics: Part 32: Synthesis, optical spectroscopy and theoretical studies of some osmium alkynyl complexes

The complexes trans-[Os(CCPh)Cl(dppe)₂] (1), trans-[Os(4-CCC₆H₄CCPh)Cl(dppe)₂] (2), and 1,3,5-{trans-[OsCl(dppe)₂(4-CCC₆H₄CC)]}₃C₆H₃ (3) have been prepared. Cyclic voltammetric studies reveal a quasi-reversible oxidation process for each complex at 0.36–0.39 V (with respect to the ferrocene/ferrocenium couple at 0.56 V), assigned to the Os^II/III couple. In situ oxidation of 1–3 using an optically transparent thin-layer electrochemical (OTTLE) cell affords the UV–Vis–NIR spectra of the corresponding cationic complexes 1⁺–3⁺; a low-energy band is observed in the near-IR region (11 000–14 000 cm⁻¹) in each case, in contrast to the neutral complexes 1–3 which are optically transparent below 20 000 cm⁻¹. Density functional theory calculations on the model compounds trans-[Os(CCPh)Cl(PH₃)₄] and trans-[Os(4-CCC₆H₄CCPh)Cl(PH₃)₄] have been used to rationalize the observed optical spectra and suggest that the low-energy bands in the spectra of the cationic complexes can be assigned to transitions involving orbitals delocalized over the metal, chloro and alkynyl ligands. These intense bands have potential utility in switching nonlinear optical response, of interest in optical technology.     

Effect of irradiation on anti-nutrients (total phenolics, tannins and phytate) in Brazilian beans

The Brazilian bean varieties Phaseolus vulgaris L. var. Carioca and Vigna unguiculata (L.) Walp var. Macaçar were irradiated with doses of 0.5, 1.0, 2.5, 5.0 and 10 kGy and subsequently stored at ambient temperature for 6 months. The anti-nutrients phenolic compounds, tannins and phytate were determined to be 0.48 mg g⁻¹ dry basis, 1.8 mg g⁻¹ dry basis and 13.5 μmol g⁻¹ dry basis in the raw non-irradiated Carioca beans and 0.30 mg g⁻¹ dry basis, 0.42 mg g⁻¹ dry basis and 7.5 μmol g⁻¹ dry basis in the raw non-irradiated Macaçar beans. After soaking and cooking a higher content of phenolic compounds and a lower phytate content was observed in both bean varieties. Tannin content was not affected by soaking and cooking of Carioca beans, but higher after soaking and cooking of Macaçar beans. Using radiation doses relevant for food did not effect the content of the anti-nutrients under investigation in both bean varieties.     

Poly(styrene-co-acrylonitrile) based proton conductive membranes

Sulfonated poly(styrene-co-acrylonitrile) (PSAN–SO₃H) membranes were obtained by sulfonation of the original styrene–acrylonitrile copolymer, in different molar ratios, and characterized by vibrational spectroscopy (FTIR), thermal analyses (TGA and DSC) and electrochemical impedance spectroscopy (EIS). The thermal stability of the sulfonated polymers exhibited a dependence on the sulfonation degree and reached 261 °C for samples up to 1:4 (sulfonating agent to styrene unit). FTIR spectra showed the covalent incorporation of sulfonic groups at the styrene units, confirming the PSAN–SO₃H formation. Vibrational spectra also indicated the presence of hydronium ions and dissociated sulfonic groups, indicating the existence of mobile protons for ion conduction. DSC analyses evidenced two glass transition temperatures (T_g), one associated with an ion-water domain and other with the chain backbone glass transition. The maximum conductivity of PSAN–SO₃H membranes at ambient temperature was about 10⁻³ Ω⁻¹ cm⁻¹, achieving 10⁻² Ω⁻¹ cm⁻¹ at 80 °C. The conductivity dependency on the temperature was found to be linear, similarly to other sulfonic acid polymers described on the literature, and the water uptake reaches 45.7% of the polymer mass, against 18.9% of the original copolymer.     

As, Cd, Cr, Ni and Pb pressurized liquid extraction with acetic acid from marine sediment and soil samples

Rapid leaching procedures by Pressurized Liquid Extraction (PLE) have been developed for As, Cd, Cr, Ni and Pb leaching from environmental matrices (marine sediment and soil samples). The Pressurized Liquid Extraction is completed after 16 min. The released elements by acetic acid Pressurized Liquid Extraction have been evaluated by inductively coupled plasma-optical emission spectrometry. The optimum multi-element leaching conditions when using 5.0 ml stainless steel extraction cells, were: acetic acid concentration 8.0 M, extraction temperature 100 °C, pressure 1500 psi, static time 5 min, flush solvent 60%, two extraction steps and 0.50 g of diatomaceous earth as dispersing agent (diatomaceous earth mass/sample mass ratio of 2). Results have showed that high acetic acid concentrations and high extraction temperatures increase the metal leaching efficiency. Limits of detection (between 0.12 and 0.5 μg g^− 1) and repeatability of the over-all procedure (around 6.0%) were assessed. Finally, accuracy was studied by analyzing PACS-2 (marine sediment), GBW-07409 (soil), IRANT-12-1-07 (cambisol soil) and IRANT-12-1-08 (luvisol soil) certified reference materials (CRMs). These certified reference materials offer certified concentrations ranges between 2.9 and 26.2 μg g^− 1 for As, from 0.068 to 2.85 μg g^− 1 for Cd, between 26.4 and 90.7 μg g^− 1 for Cr, from 9.3 to 40.0 μg g^− 1 for Ni and between 16.3 and 183.0 μg g^− 1 for Pb. Recoveries after analysis were between 95.7 and 105.1% for As, 96.2% for Cd, 95.2 and 100.6% for Cr, 95.7 and 103% for Ni and 94.2 and 105.5% for Pb.     

Chemistry and reactivity of dinuclear manganese oxamate complexes: Aerobic catechol oxidation catalyzed by high-valent bis(oxo)-bridged dimanganese(IV) complexes with a homologous series of binucleating 4,5-disubstituted-o-phenylenedioxamate ligands

The high-valent bis(oxo)-bridged dimanganese(IV) complexes with the series of binucleating 4,5-X₂-o-phenylenebis(oxamate) ligands (opbaX₂; X = H, Cl, Me) (1a–c) have been synthesized and characterized structurally, spectroscopically and magnetically. Complexes 1a–c possess unique Mn₂(μ-O)₂ core structures with two o-phenylenediamidate type additional bridges which lead to exceptionally short Mn–Mn distances (2.63–2.65 Å) and fairly bent Mn–O–Mn angles (94.1°–94.6°). The cyclovoltammograms of 1a–c in acetonitrile (25 °C, 0.1 M Bu₄NPF₆) show an irreversible one-electron oxidation peak at moderately high anodic potentials (E_ap = 0.50–0.85 V versus SCE), while no reductions are observed in the potential range studied (down to −2.0 V versus SCE). These dinuclear manganese oxamate complexes are excellent catalysts for the aerobic oxidation of 3,5-di-tert-butylcatechol to the corresponding o-quinone in acetonitrile at 25 °C. The order of increasing catecholase activity (k_obs) with the electron donor character of the ligand substituents as 1b (X = Cl) < 1a (X = H) < 1c (X = Me) correlates with Hammett σ⁺ values (ρ = −0.95). A mechanism involving initial activation of the catechol substrate by coordination to the dimetal center and subsequent oxidation to quinone by O₂ is proposed, which is consistent with the observed saturation kinetics.     

Laser-induced breakdown spectroscopy of γ-Fe2O3 nanoparticles in a biocompatible alginate matrix

An intensive multi-disciplinary research effort is underway at Wayne State University to synthesize and characterize magnetic nanoparticles in a biocompatible matrix for biomedical applications. The particular system being studied consists of 3–10 nm γ-Fe₂O₃ nanoparticles in an alginate matrix, which is being studied for applications in targeted drug delivery, as a magnetic-resonance imaging (MRI) contrast agent, and for hyperthermic treatments of malignant tumors. In the present work we report on our efforts to determine if laser-induced breakdown spectroscopy (LIBS) can offer a more accurate and substantially faster determination of iron content in such nanoparticle-containing materials than competing technologies such as inductively-coupled plasma (ICP). Standardized samples of -Fe₂O₃ nanoparticles (5–25 nm diameter) and silver micropowder (2–3.5 μm diameter) were created with thirteen precisely known concentrations and pressed hydraulically to create solid “pellets” for LIBS analysis. The ratio of the intensity of an Fe(I) emission line at 371.994 nm to that of an Ag(I) line at 328.069 nm was used to create a calibration curve exhibiting an exponential dependence on Fe mass fraction. Using this curve, an “unknown” γ-Fe₂O₃/alginate/silver pellet was tested, leading to a measurement of the mass fraction of Fe in the nanoparticle/alginate matrix of 51 ± 3 wt.%, which is in very good agreement with expectations and previous determinations of its iron concentration.     

Preparation and characterization of ruthenium(II), rhodium(III) and iridium(III) complexes of isocyanide bearing the azo group

Reactions of [(η⁶-arene)RuCl₂]₂ (1) (η⁶-arene=p-cymene (1a), 1,3,5-Me₃C₆H₃ (1b), 1,2,3-Me₃C₆H₃ (1c) 1,2,3,4-Me₄C₆H₂(1d), 1,2,3,5-Me₄C₆H₂ (1e) and C₆Me₆ (1f)) or [Cp*MCl₂]₂ (M=Rh (2), Ir (3); Cp*=C₅Me₅) with 4-isocyanoazobenzene (RNC) and 4,4′-diisocyanoazobenzene (CN–R–NC) gave mononuclear and dinuclear complexes, [(η⁶-arene)Ru(CNC₆H₄N=NC₆H₅)Cl₂] (4a–f), [Cp*M(CNC₆H₄N=NC₆H₅)Cl₂] (5: M=Rh; 6: M=Ir)_, [{(η⁶-arene)RuCl₂}₂{μ-CNC₆H₄N=NC₆H₄NC}] (8a–f) and [(Cp*MCl₂)₂(μ-CNC₆H₄N=NC₆H₄NC)}] (9: M=Rh; 10: M=Ir)_, respectively. It was confirmed by X-ray analyses of 4a and 5 that these complexes have trans-forms for the ---N=N--- moieties. Reaction of [Cp*Rh(dppf)(MeCN)](PF₆)₂ (dppf=1,1′-bis (diphenylphosphino)ferrocene) with 4-isocyanoazobenzene gave [Cp*Rh(dppf)(CNC₆H₄N=NC₆H₅)](PF₆)₂ (7), confirmed by X-ray analysis. Complex 8b reacted with Ag(CF₃SO₃), giving a rectangular tetranuclear complex 11b, [{(η⁶-1,3,5-Me₃C₆H₃)Ru(μ-Cl}₄(μ-CNC₆H₄N=NC₆H₄NC)₂](CF₃SO₃)₄ bridged by four Cl atoms and two μ-diisocyanoazobenzene ligands. Photochemical reactions of the ruthenium complexes (4 and 8) led to the decomposition of the complexes, whereas those of 5, 7, 9 and 10 underwent a trans-to-cis isomerization. In the electrochemical reactions the reductive waves about −1.50 V for 4 and −1.44 V for 8 are due to the reduction of azo group, [---N=N---]→[---N=N---]²⁻. The irreversible oxidative waves at ca. 0.87 V for the 4 and at ca. 0.85 V for 8 came from the oxidation of Ru(II)→Ru(III).     

Redox potential of bacteriorhodopsin in oriented purple membrane films

The redox potentials of bacteriorhodopsin (BR) in oriented purple membrane (PM) films formed by the electrophoretic sedimentation (EPS) technique and the Langmuir–Blodgett (LB) technique were measured. The PM LB film and PM EPS film formed at 0.4 V versus SCE electrode potential exhibited two redox potentials at −0.48 and −0.76 V for the cis- and trans-isomers of the retinal Schiff base in the BR, respectively. The reduction current of BR in the PM LB film was greater than that in the PM EPS film and the reduction current of BR in the PM cast film was ca. 70% smaller values of the PM LB film. The results indicate that the electron transfer was affected by a difference in the orientation of PM patches in the films.     

Linear sweep voltammetric determination of protein based on its interaction with Alizarin Red S

In this paper, the electrochemical behavior of the interaction of Alizarin Red S (ARS) with bovine serum albumin (BSA) was investigated on the hanging mercury drop electrode (HMDE). In the acidic solution (pH 4.2), ARS can be easily reduced on the HMDE and it has a well-defined polarographic wave at −0.29 V (SCE). On addition of BSA or human serum albumin (HAS) into the ARS solution, the reduction peak current of ARS decreases without the movement of the peak potential and the appearance of new peaks. The study shows that a new electrochemically non-active complex is formed via intercalation of ARS with BSA or HSA, which can not be reduced on the Hg electrode. The decrease of reductive peak current of ARS is proportional to BSA and HSA concentration in the range of 2.0–60 and 2.0–40 mg l⁻¹, respectively. The detection limit of BSA and HSA is 1.0-mg l⁻¹. The analytical results of human serum and urine samples by this method were in good agreement with the Coomassie brilliant blue G-250 assay. The binding number and the binding interaction mechanism are also discussed.     

Ion chromatographic determination of traces of some oxoanions with direct spectrophotometric detection

Investigation of the use of a single analytical procedure using the non-suppressed ion chromatographic method with direct spectrophotometric detection capable of determining eight oxoanions simultaneously is presented in this paper. Potassium phosphate was found to be the most suitable eluent for UV absorbance detection at 205 nm. Oxoanions AsO³⁻₃, SeO²⁻₃, AsO³⁻₄, VO⁻₃, SeO²⁻₄, WO²⁻₄, MoO²⁻₄ and CrO²⁻₄ were detected at ng ml⁻¹ levels with well separated peaks at retention time < 25 min. The working range is in the range ng ml⁻¹ to 50 μg ml⁻¹. The method is sufficiently sensitive to determine As (V), V(V), Mo(VI) and Cr(VI) anions (and NO⁻₃) directly in a river water sample. The accuracy of these results was established by comparison with conventional atomic absorption methods.     

四磺酸酞菁铜—DDAB表面活性剂薄膜电极对卤代乙酸的电化学催化

四磺酸酞菁铜阴离子（ＣｕＰｃＴｓ＾４－）在水溶液中可借助离子交换进入阳离子表面活性剂双十二烷基二甲基溴化铵（ＤＤＡＢ）薄膜电极，从而形成ＣｕＰｃＴＳ＾４－－ＤＤＡＢ薄膜电极，循环伏安实验表明，在ＫＢｒ溶液中，该薄膜电极有一对良好的还原氧化峰，阴阳极峤电位分别为－０．７８Ｖ和－０．６５Ｖ（ｖｓ．ＳＣＥ）．探讨了该薄膜电极的电化学行为，特别是对其各种卤代乙酸的电化学催化，对其机理进行了推测。     

Evaluation of an amperometric glucose biosensor based on a ruthenium complex mediator of low redox potential

An amperometric glucose ring-disk biosensor based on a ruthenium complex mediator of low redox potential was fabricated and evaluated. This thin-layer radial flow microsensor (10 μl) with ring-disk working electrode displayed remarkable amperometric sensitivity. For Ru₃(μ₃-O)(AcO)₆(Py)₃(ClO₄) (Ru-Py), a trinuclear oxo-acetate bridged cluster, a reversible redox curve of low redox potential and narrow potential window (redox potentials were −0.190 and −0.106 V versus Ag/AgCl wire, respectively) was observed, which is comparable to many reported mediators such as ferrocene derivatives and other ruthenium complexes. The glucose and hydrogen peroxide assays were carried out with this complex-modified electrode Ru-Py-HRP-GOx/Nafion. The sensitivity was obtained 24 nA (15.4 mA M⁻¹ cm⁻²) for 10 μM glucose and 126 nA (160 mA M⁻¹ cm⁻²) for 5 μM H₂O₂, respectively with a working potential at 0 V versus Ag/AgCl. Ascorbic acid was studied as interference to the glucose assay. The application of 0 V potential versus Ag/AgCl did not avoid the occurrence of the oxidation of ascorbic acid, however, the pre-coating of ascorbate oxidase on the disk part of the ring-disk working electrode efficiently pre-oxidized the ascorbic acid and hence eliminated its interference on the glucose response. The practical reliability was also evaluated by assaying the dialysate from the prefrontal cortex of Wistar rats.     

A new simple sensitive differential pulse polarographic method for the determination of acrylamide in aqueous solution

A new simple sensitive differential pulse polarographic (DPP) method was investigated for the determination of acrylamide (AA) directly in a neutral aqueous solution. The AA showed a well-defined and well-resolved peak in pure aqueous LiCl at −1.84 V in the potential range from −1.6 V to −1.97 V at nitrogen pressure of 0.5 kg cm⁻². Among the various electrolytes studied, the AA showed good DPP response in the presence of LiCl and tetra methyl ammonium iodide, while it showed poor response in the presence of tetra butyl ammonium hydroxide and tetra butyl ammonium bromide due to their strong adsorption on the surface of electrode which hindered its reduction. The effect of LiCl concentration, the cyclic voltammetric response and the drop time study showed that AA exhibited an irreversible adsorptive electrochemical behavior. The good electrochemical response in pure aqueous medium suggested that hydrogen bonding might be involved which may favor the electrode reaction. Under optimized conditions, the peak current was linear in the entire concentration range from 0.2 mg L⁻¹ to 20 mg L⁻¹ with the correlation coefficient of R² = 0.9998. The method showed good reproducible results with R.S.D. of 0.3% (n = 16). The detection limit (LOD) was 27 μg L⁻¹. The influence of various interfering agents was also studied. The method was applied successfully for the quantification of AA in water samples without any interference effect from alkali metals.     

Laser induced breakdown spectroscopy of soils, rocks and ice at subzero temperatures in simulated martian conditions

We applied Laser Induced Breakdown Spectroscopy (LIBS) on moist soil/rock samples in simulated Martian conditions. The signal behavior as a function of the surface temperature in the range from + 25 °C to − 60 °C was studied at pressure of 7 mbar. We observed the strong signal oscillations below 0 °C with different negative peaks, whose position, width and magnitude depend on the surface roughness. In some cases, the signal was reduced for one order of magnitude with consequences for the LIBS analytical capability. We attribute such a signal behavior to the presence of supercooled water inside the surface pores, which freezing point depends on the pore size. On a same rock samples with different grades of the surface polishing, the signal has different temperature dependence. Its decrease was always registered close to 0 °C, corresponding to the freezing/melting of normal disordered ice, which can be present inside larger pores and scratching. An amount of the signal reduction at the phase transition temperatures does not seem to change with the laser energy density in the examined range. Comparative measurements were performed on a frozen water solution. A large depression, for two orders of magnitude, of the LIBS intensity was observed close to − 50 °C. The same negative peak, but with a smaller magnitude, was also registered on some rock/soil samples. Ablation rates and plasma parameters as a function of the sample temperature are also discussed, and their consequences for in-situ analyses.     

Equilibrium reactions network for the cis- or trans-bis(pyrazine)tetraammineruthenium(II/III) and ruthenium(II/III)-EDTA complexes

The electrochemical and spectroelectrochemical behavior of the binuclear and trinuclear complexes generated from the association of cis- or trans-[Ru(NH₃)₄(pz)₂]^3+/2+ (where pz represents pyrazine) and [RuEDTA(H₂O)]^2−/− complexes has been investigated in aqueous solution. Based on two sets of spectrophotometrically determined equilibrium constants and on the formal redox potentials, the complex network of equilibrium reactions involving mixed valence species has been elucidated.     

Donnan dialysis preconcentration coupled with ion chromatography and electrocatalytic oxidation for the determination of cyanide

An electrocatalytic amperometric detector for the ion chromatographic determination of CN⁻ is described. A conducting composite that is based on a graphite-loaded sol–gel material comprises the working electrode. The composite is doped with a Ru^II metallodendrimer which is demonstrated to promote the electrochemical oxidation of CN⁻ at potentials positive of 0.5 V vs. Ag/AgCl. In 6 mM NaOH, 0.05 M NaCl flowed at 1.0 ml min⁻¹, a 5-point calibration curve with the following linear least squares parameters is obtained over the range, 1.0–30 M CN⁻: slope, 24.2±0.1 nA M⁻¹; intercept, −6±2 nA; and r, 0.9997. The detection limit, 0.7 μM CN⁻, compares favorably to that obtained by amperometry at a silver electrode, 0.5 μM CN⁻, under comparable experimental conditions. A 60-min preconcentration by Donnan dialysis increases the sensitivity by a factor of 23.6.