Electrochemical Detection of Nitrite in Meat and Water Samples Using a Mesoporous Carbon Ceramic SiO2/C Electrode Modified with In Situ Generated Manganese(II) Phthalocyanine

Mesoporous carbon ceramic SiO₂/50 wt % C (S_BET=170 m² g^?1), where C is graphite, were prepared by the sol‐gel method. The materials were characterized using N₂ sorption isotherms, scanning electron microscopy, and conductivity measurements. The matrix was used as support for the in situ immobilization of Mn(II) phthalocyanine (MnPc) on their surface. XPS was used to determine the Mn/Si atomic ratios of the MnPc‐modified materials. Pressed disk electrodes were prepared with the MnPc‐modified matrix, and tested as an electrochemical sensor for nitrite oxidation. The linear response range, sensitivity, detection limit and quantification limit were 0.79–15.74 µmol L^?1, 17.31 µA L µmol^?1, 0.02 µmol L^?1 and 0.79 µmol L^?1, respectively, obtained using cyclic voltammetry. The repeatability of the proposed sensor, evaluated in terms of relative standard deviation was 1.7 % for 10 measurements of a solution of 12.63 µmol L^?1 nitrite. The sensor employed to determine nitrite in sausage meat, river and lake water samples showed to be a promising tool for this purpose.     

Quantitative Analysis of Nicorandil in Commercial Tablets by Spectrophotometry

The main aim of this work is to develop and validate a spectrophotometric method for the determination of nicorandil in commercial tablets. The method is based on the reduction of the nitroxy ethyl group of nicorandil into carbonyl compound and nitrite ion by NH₄Cl and Zn dust. The nitrite ion thus formed reacts with potassium iodide and starch in dilute HCl medium to form a blue product, which absorbs maximally at 550 nm. Beer's law is obeyed in the concentration range 0.4‐4.0 μg mL^?1 with molar absorptivity of 7.92 × 10⁴L mol^?1 cm^?1. The detection limit is 0.017 μg mL^?1. The reaction conditions are optimized and validated as per the International Conference on Harmonisation guidelines (USA). The proposed method has been applied successfully for the determination of nicorandil in commercial tablets. The results of analyses are compared statistically with those of the author's spectrophotometric method, which confirmed that there is no significant difference between the methods compared.     

Pencil Lead Electrode Modified with Hemoglobin Film as a Novel Biosensor for Nitrite Determination

In the present paper, the electrochemical reduction of nitrite at a hemoglobin modified pencil lead electrode (Hb/PLE) is described. The electrochemical properties of nitrite were studied by cyclic voltammetry and chronoamperometry. Results showed that the hemoglobin film has an excellent electrochemical activity towards the reduction of nitrite. By using voltammetric and chronoamperometric methods, α, n_α and n were calculated. Then the ability of the electrode for nitrite determination was investigated using differential pulse voltammetry. The electrocatalytic reduction peak currents were found to be linear with the nitrite concentration in the range from 10 to 220 µM with a detection limit of 5 µM. The relative standard deviation is 2 % for 3 successive determinations of a 100 µM nitrite solution. This modified electrode was successfully used for the detection of low amounts of NO₂^? in spinach sample and a spiked sample of tap water.     

Precise and sensitive determination of nitrite by coulometric backtitration under flow conditions

A novel method performing for coulometric backtitrations in flow channels was developed, which ¶was applied for the precise and sensitive determination of low concentrations of nitrite. Under acid conditions nitrite is reacting stoichiometrically with hydrazine, the remained excess of which is backtitrated with electrogenerated bromine. The titration course is recorded either amperometrically or chemiluminometrically. Hydrazine can be determined precisely and accurately in the range between 0.1 μM and 1 mM without calibration. Nitrite is reduced by hydrazine according to the reaction 2 NO₂ ^– + 2 H⁺ + NH₂-NH₂→N₂O + N₂ + 3 H₂O. Applying the amperometric and the chemiluminometric end-point location nitrite was determined accurately and precisely in the ranges 0.25–65 μM and 0.10–50 μM, respectively. The method was applied to the determination of nitrite in tap and river water.     

A Novel Cerium Tungstate Nanosheets Modified Electrode for the Effective Electrochemical Detection of Carcinogenic Nitrite Ions

In this present scenario, for the first time, we propose a facile and simple wet chemical approach for the fabrication of two‐dimensional (2D) cerium tungstate (CeW₂O₉;CeW) nanosheets and evaluated as an electrochemical sensor for the detection of nitrite ions. The successful formation of CeW₂O₉ nanosheets was confirmed by various physicochemical techniques such as X‐ray diffraction, Fourier transform infrared spectroscopy, Raman, Scanning electron microscope, Transmission electron microscope and Energy dispersive X‐ray studies. The electrochemical properties of the CeW nanosheets were studied by using cyclic voltammograms (CV) and chronoamperometric techniques. As an electrochemical sensor, the CeW nanosheets modified glassy carbon electrode (GCE) showed superior electrocatalytic activity in the oxidation of nitrite in terms of higher anodic peak current and lower oxidation potential when compared with unmodified GCE. CeW nanosheets based electrochemical sensor has been fabricated which detect nitrite in wide linear response range, good sensitivity and very low detection limit of 0.02–986 μM, 2.85 μA μM⁻¹ cm⁻² and 8 nM, respectively. Moreover, the CeW nanosheets modified GCE exhibited excellent selectivity even in the presence of common metal ions and biologically co‐interfering compounds. For the practical viability of the prepared amperometric sensor has been utilized in various water samples such as tap, lake and drinking water and the obtained recoveries are appreciable.     

Kinetic Flow Injection Spectrophotometric Determination of Nitrite by its Catalytic Effect on the Oxidation of Chlorophosphonazo-pN by Bromate

Abstract

A flow injection kinetic method has been developed for the determination of nitrite, based on its catalytic effect on bromate oxidation of chlorophosphonazo-pN in H₂SO₄ medium. The reaction is followed spectrophotometrically by measuring the decrease in the absorbance at 551 nm. The sampling frequency was 83 h^?1. The calibration curve was linear between 0.050 and 1.00 μg/ml, and the detection limit was 0.018 μg/ml. The proposed method was applied to the determination of nitrite in waters and soil with satisfactory results.     

Fabrication of Acid Violet 34/Nickel Hydroxide Ultrathin Film and Its Electrocatalytic Performance for Glucose

This article reports the fabrication of Acid Violet 34 (AV34)/nickel hydroxide nanosheets ultrathin film on the glassy carbon electrode (GCE) via the electrostatic layer‐by‐layer (LBL) technique, and its electrocatalytic oxidation for glucose was demonstrated. UV‐vis absorption and electrochemical impedance spectra indicate the uniform deposition of the LBL film, with a continuous and smooth film surface observed by SEM and AFM. The electrochemical performance of the ultrathin film was studied by cyclic voltammetry and chronoamperometry. The (AV34/Ni(OH)₂)₅ ultrathin film modified electrode displays a fast direct electron transfer attributed to the Ni²⁺/Ni³⁺ redox couple as well as remarkable electrocatalytic activity towards the oxidation of glucose. The linear response was obtained in the range 0.5–13.5 mM (R=0.9994) with a low detection limit (14 µM), high sensitivity (25.9 µA mM^?1 cm^?2), rapid response (less than 1 s) and excellent anti‐interference properties to the species including ascorbic acid (AA), uric acid (UA), acetamidophenol (AP) and structurally related sugars. Therefore, the AV34/Ni(OH)₂ ultrathin film can be potentially used as a feasible electrochemical sensor for the determination of glucose.     

Characterizing Enzyme Cooperativity with Imaging SAMDI-MS

This paper describes a method that combines a microfluidic device and self-assembled monolayers for matrix-assisted laser desorption/ionization mass spectrometry (SAMDI) mass spectrometry to calculate the cooperativity in binding of calcium ions to peptidylarginine deiminase type 2 (PAD2). This example uses only 120 μL of enzyme solution and three fluidic inputs. This microfluidic device incorporates a self-assembled monolayer that is functionalized with a peptide substrate for PAD2. The enzyme and different concentrations of calcium ions are flowed through each of eight channels, where the position along the channel corresponds to reaction time and position across the channel corresponds to the concentration of Ca²⁺. Imaging SAMDI (iSAMDI) is then used to determine the yield for the enzyme reaction at each 200 μm pixel on the monolayer, providing a time course for the reactions. Analysis of the peptide conversion as a function of position and time gives the degree of cooperativity (n) and the concentration of ligand required for half maximal activity (K_0.5) for the Ca²⁺ – dependent activation of PAD2. This work establishes a high-throughput and label-free method for studying enzyme-ligand binding interactions and widens the applicability of microfluidics and matrix-assisted laser desorption/ionization mass spectrometry (MALDI) imaging mass spectrometry.     

Spectrofluorimetric Determination of Nitrite with Pyridoxal-5-Phosphate-2-Pyridylhydrazone

Abstract

The nitrite ion oxidizes pyridoxal-5-phosphate-2-pyridyl-hydrazone in acid medium giving a fluorescent product (λ_ex 325 nm, λ_em 420 nm). This redox reaction is used to developed a spectrofluorimetric method for the determination of nitrite. The calibration graph is liner in the 0.1 ? 1.0 μg mL^?1 range. The interference levels, stoichiometry and nature of the reaction have been studied. The method is applied to determine nitrite in water and soil samples     

Electrocatalytic Determination of Nitrite on a Rigid Disk Electrode Having Cobalt Phthalocyanine Prepared In Situ

This work reports an in situ cobalt(II) phthalocyanine (CoPc) synthesis on a SiO₂/SnO₂ (SiSn) matrix surface obtained by the sol‐gel method and its electrocatalytic activity for oxidation of nitrite. A rigid disk electrode with SiSn/CoPc was used to study the electrooxidation of nitrite by the cyclic voltammetric, chronoamperometric techniques and differential pulse voltammetry (DPV). The adsorbed phthalocyanine electrocatalyzed nitrite oxidation at 0.73 V (versus SCE) using the DPV technique. The anodic peak current intensities, plotted from differential pulse voltammograms in 1 mol L^?1 KCl for the concentration range 0.002 to 3.85 mmol L^?1 of nitrite were linear, with a correlation coefficient of 0.998 and a detection limit of 0.95 μmol L^?1.     

Determination of nitrite by simple diazotization method

A simple and rapid spectrophotometric method for the determination of nitrite is described. This is based upon simple diazotization reactions involving p-nitroaniline (PNA) and sulfanilamide (SA) with ethyl acetoacetate (EAA) as the coupling agent. The absorbance was measured at 507 and 356 nm, respectively. The method is optimized for acidity, amount of reagents required, amount of sodium hydroxide and the tolerance amount of other ions. The range of linearity for PNA-EAA couple was 0.05-6.0 μg ml⁻¹ of nitrite with molar absorptivity of 1.59×10⁴ l mol⁻¹ cm⁻¹; while that for SA-EAA couple was found to be 0.2-3.0 μg ml⁻¹ and 1.22×10⁴ l mol⁻¹ cm⁻¹, respectively. The method has been applied to various water and soil samples.     

Fluorimetric determination of mebendazole and flubendazole in pharmaceutical dosage forms after alkaline hydrolysis

The selective and very sensitive fluorimetric determination of mebendazole and flubendazole is based on alkaline hydrolysis and adsorption on Whatman 42 filter paper. Limits of detection are 0.1 μg ml^?1 and 0.5 μg ml^?1, respectively, with linear response sponse up to 10 μg ml^?1 and 50 μg ml^t?1. The fluorescence produced is very stable (λ_em = 460 nm) and the method is applicable to anthelmintic pharmaceutical preparations.     

A Cobalt Film Electrode for Nitrite Determination in Natural Water

In this study a cobalt film electrodeposited on a copper disk (Ø=3.1 mm) was tested as electrode to measure nitrite ions in raw water. This electrode was able to determine the nitrite ions concentration in nondeaerated synthetic media and in natural water. The electrode reached a detection limit of 0.2 μmol L^?1 and has a linear concentration range of 0.4 to 2 μmol L^?1 NO₂^?. The influence of several ions such as NO₃^?, Cl^?, SO₄^2?, Mg²⁺, HCO₃^? and NH₄⁺ was also tested. The electrode was used to determine the concentration of nitrite ions in a real sample.     

HPLC Analysis of [3H]-Arachidonic Acid Metabolites Produced by Smooth Muscle and Endothelial Cells in Response to Leukotriene D4

Abstract

Clonally derived murine and rat smooth muscle cells and bovine endothelial cells were incubated with [³H]-arachidonic acid for 16 hours (10 μCi/ml). The cells were then rinsed twice with saline and then treated with leukotriene D₄ (LTD₄) (1 μM) for 10 min. The supernatants from these cells were acidified with phosphoric acid (0.1% vol:vol), and then extracted with two volumes of ethylacetate. The radioactivity in the organic phase was analyzed by HPLC using an on-line radioactivity detector equipped with a solid scintillating flow cell. This procedure allowed us to monitor the arachidonic acid metabolites produced in response to LTD₄. From data obtained by this method we conclude that LTD₄ increases both lipoxygenase and cyclooxygenase product formation in these cells and that this method may be useful in obtaining qualitative information concerning eicosanoid metabolism in other biological systems.     

First synthesis of nitro-substituted bicyclo[1.1.0]butane derivatives and new method for generation of tricyclo[4.1.0.0<Superscript>2,7</Superscript>]hept-1(7)-ene

Successive treatment of 1-phenylsulfonyltricyclo[4.1.0.0^2,7]heptane with butyllithium and ethyl nitrate leads to the formation of 7-nitro-7′-phenylsulfonyl-1,1′-bi(tricyclo[4.1.0.0^2,7]heptane) through intermediate tricyclo[4.1.0.0^2,7]hept-1(7)-ene which is generated by 1,2-elimination of benzenesulfinic acid from the initial compound. Analogous treatment of 1-phenyltricyclo[4.1.0.0^2,7]heptane gives 1-nitro-7-phenyltricyclo[4.1.0.0^2,7]heptane.     

Diaminobenzene as a Novel Reagent for Nitrite Assay in Environmental Samples: Evidence for Its Mechanistic Aspects

Abstract

o-Phenylenediamine has been used as a reagent to quantify nitrites/nitrates in a variety of sample matrices. The method is based on the cyclization reaction between o-phenylenediamine and nitrite in acid medium. The amine undergoes diazotization with nitrite in the presence of acid to form the diazonium ion, which subsequently cyclizes to yield yellowish orange benzotriazole at room temperature with an absorption maximum at 450 nm. The formed dye has been separated, purified, and characterized by IR, NMR, and spectroscopy techniques. The parameters of the reaction between amine and nitrite have been optimized. The effect of interfering ions on the determination of nitrites/nitrates has been described. The developed method has been applied for the determination of residual NO₂ gas present in the ambient air after fixing it as a nitrite ion using sodium arsenite as a trapping medium. The dye formed has been extracted into organic solvent to improve the detection limit during the measurement of low levels of ambient NO₂ in air. The method obeyed Beer's law in the concentration range 0–250 µg in aqueous medium and 0–50 µg in organic medium with molar absorptivity of 4.09 × 10⁴ L mol^?1 cm^?1 and 4.3 × 10⁴ L mol^?1 cm^?1 respectively. Nitrate is determined by reducing it to nitrite after passing through the copperized cadmium reductor column. The developed method has been applied to determine nitrite/nitrate levels in water, soil, and biological samples.     

A simple isocratic LC method for quantification of trace-level inorganic degradation impurities (ferricyanide,ferrocyanide, nitrite,and nitrate) in sodium nitroprusside injection and robustness by quality using design approach

This study developed and validated a trace-level quantification inorganic impurities method using reversed-phase HPLC and performed the robustness check using quality-by-design approach by varying the multiple factors simultaneously. This method is economical and simple and exhibits its stability-indicating nature [for the determination of ferrocyanide ([Fe(CN)₆]^4–), ferricyanide ([Fe(CN)₆]³⁻), nitrate (NO₃^–), and nitrite (NO₂^–)] in sodium nitroprusside (SNP) drug substance and liquid dosage form. Chromatographic separation was achieved using a USP L43 column (ACE PFP, 150 × 4.6 mm, 3 μm) with a simple isocratic elution. The buffer consists of potassium dihydrogen phosphate (50 mM), tetrabutylammonium hydrogen sulfate (9 mM), and tetrabutylammonium hydroxide (25 mM). The buffer pH was adjusted to 7.2 with tetrabutylammonium hydroxide. The mobile phase was mixed with the buffer and acetonitrile (68:32 v/v). The flow rate was 0.8 mL/min, column temperature was maintained at 30°C, and injection volume was 5.0 μL. The SNP impurities were monitored at 225 nm using a UV detector. Further, the method was validated per the International Council for Harmonisation (ICH) guidelines, and forced degradation studies were carried out under different stress conditions. The detector responses were plotted against concentrations, and correlation was linear (r > 0.999) over the range of 0.8–7.5 μg/mL for ferricyanide; 1.0–37.5 μg/mL for SNP; and 0.2–7.5 μg/mL for ferrocyanide, nitrite, and nitrate. The method repeatability was established for all the impurities with relative standard deviation (%), and the results were found to be less than 2.0.     

Sequential Spectrophotometric Determination of Microgram Amounts of Nitrate and Nitrite in Mixtures

This paper describes three new methods: the first may be used for the determination of nitrite; the second is applicable to determination of nitrate; and the third permits sequential determination of both nitrite and nitrate in mixtures with no prior separation. For the determination of nitrite and nitrate in synthetic mixtures containing 1:5 to 5:1 ratios of the ions, in tap water, and in river water, mean recoveries (for 3 to 22 μg of added NO⁻₃and NO⁻₂) are 96.1 and 98.1% (n= 15) and coefficients of variation are 2.2 and 2.5% for NO⁻₃and NO⁻₂(n= 5), respectively.     

Catalytic dehydrogenation of propane to propylene over highly active PtSnNa/γ-Al_2O_3 catalyst

This paper reports a new fabrication method of the PtSnNa/γ-Al₂O₃ catalyst through ball milling, which is more stable and active than the commercial catalyst.     

Simple and Equipment-Free Paper-Based Device for Determination of Mercury in Contaminated Soil

This work presents a simple and innovative protocol employing a microfluidic paper-based analytical device (µPAD) for equipment-free determination of mercury. In this method, mercury (II) forms an ionic-association complex of tetraiodomercurate (II) ion (HgI₄²⁻_(aq)) using a known excess amount of iodide. The residual iodide flows by capillary action into a second region of the paper where it is converted to iodine by pre-deposited iodate to liberate I_2(g) under acidic condition. Iodine vapor diffuses across the spacer region of the µPAD to form a purple colored of tri-iodide starch complex in a detection zone located in a separate layer of the µPAD. The digital image of the complex is analyzed using ImageJ software. The method has a linear calibration range of 50–350 mg L⁻¹ Hg with the detection limit of 20 mg L⁻¹. The method was successfully applied to the determination of mercury in contaminated soil and water samples which the results agreed well with the ICP-MS method. Three soil samples were highly contaminated with mercury above the acceptable WHO limits (0.05 mg kg⁻¹). To the best of our knowledge, this is the first colorimetric µPAD method that is applicable for soil samples including mercury contaminated soils from gold mining areas.