Multiple plasmonic effect on photocurrent generation of metal‐loaded titanium dioxide composite/dye films on gold grating surface

We demonstrate the multiple plasmonic effect on the photocurrent properties of photoanodes containing Ag or Au nanoparticles (NPs) loaded onto titanium dioxide film (Ag–TiO₂ or Au–TiO₂) on Au grating surfaces. Ag–TiO₂ or Au–TiO₂ nanocomposite particles are prepared by a flame spray pyrolysis route. The structures and morphologies of the prepared products are characterized by high‐resolution transmission electron microscopy. The Ag–TiO₂ or Au–TiO₂ composite NPs are deposited by spin coating onto the Au grating surfaces. The photoanode electrode is a layered structure of blu‐ray disc‐recordable grating substrate/Au/Ag (or Au)–TiO₂/dye/electrolyte/indium‐tin oxide. The plasmonic effect is induced when Ag or Au NPs are located within the propagating surface plasmon (SP) field on the Au grating surface. The short‐circuit photocurrent is increased by exciting the grating‐coupled propagating SP on the Au gratings and is further enhanced by positioning the Ag or Au NPs within the grating‐coupled SP field. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct electron transfer of copper–zinc superoxide dismutase (SOD) on crystallographically oriented Au nanoparticles

The direct electron transfer (ET) of copper–zinc superoxide dismutase (SOD) has been realized, for the first time, at Au nanoparticles electrodeposited onto GC (nano-Au/GC) electrodes. Electrodeposition of Au nanoparticles in the presence of some additive (typically cysteine) resulted in the fabrication of Au nanoparticles with a high roughness morphology (enriched in the Au(1 0 0) orientation) and thus providing a favorable adsorption orientation of SOD (key–lock interaction) suitable for a facilitated direct ET without the use of mediators or so-called ET promoters. The redox reaction of the SOD confined on the nano-Au/GC electrode was found to have a formal potential of +0.02 V vs. Ag/AgCl/KCl(sat). Whereas, round-shape spherical plumbs of Au nanoparticles were electrodeposited in the presence of iodide ions (as additive) which lack for the favorable rough surface and consequently the suitable interaction with the SOD is missing and hence the ET is not realized at this surface.     

Cyanide adsorbed on coinage metal electrodes: A relativistic density functional investigation

The adsorptive properties of cyanide (CN⁻) on coinage metal (M) electrodes (M=Cu, Ag, Au) have been investigated using a relativistic density functional method. The way to model the electrochemical potential applied to the electrodes is to consider the systems in the presence of a perturbative external field F. The field-perturbative approach is proven to be a suitable method in interpreting the observed spectral shifts with electrode potential. The calculated potential-dependent shifts of ω_{M(SINGLE BOND)CN} and ω_{C(SINGLE BOND)M} are similar for the three metals, in agreement with experiment observations. The relativistic effects are required to account for the similarity in the frequency shifts of ω_{M(SINGLE BOND)CN}. The calculated vibrational tuning rates dω_{C(SINGLE BOND)N}/dF are 6.61×10⁻⁷, 6.61×10⁻⁷, and 5.64×10⁻⁷ cm⁻¹/(V/cm) for M=Cu, Ag, and Au, respectively. The coupling of the M(SINGLE BOND)CN and C(SINGLE BOND)N internal modes contributes significantly (about 25%) to the size of the frequency shifts Δω_{C(SINGLE BOND)N} of the ligand. The effect of electric fields on the metal(SINGLE BOND)CN⁻ bonding is also investigated. It is shown that changes in the magnitude of CN⁻ to the metal donation and M(SINGLE BOND)CN bond strength occur under the influence of the electric field. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 67: 175–185, 1998     

Static investigation of adsorption and hetero‐diffusion of copper,silver, and gold adatoms on the (111) surface

In this work, we have used the static molecular simulations combined with an interatomic potential derived from the embedded‐atom method to study the adsorption and hetero‐diffusion on the (111) surface of Cu, Ag, and Au adatoms by using LAMMPS code. The investigation is performed for six heterogeneous systems such as Ag/Au(111), Ag/Cu(111), Au/Ag(111), Au/Cu(111), Cu/Ag(111), and Cu/Au(111). First, we have investigated the relaxation trends and the bond lengths of the atoms in the systems. The calculation results show that, the top layer spacing between the first and second layers of the Au(111), Ag(111), and Cu(111) substrates is contracted. This contraction is found to be more important in the Au(111) substrate. On the other hand, the strong reduction of the binding length is found in Au/Cu(111) for the different adsorption sites. In addition, the binding, adsorption, and static activation energies for all studied systems were examined. The results indicated that the binding and adsorption energies reached their maximum values in the Au/Cu(111) and Au/Ag(111) systems, respectively. Moreover, the static activation barriers for hopping diffusion on the (111) surfaces are found to be low compared with those found in the (100) and (110) surfaces. Therefore, our calculations showed that the difference in energy between the hcp and fcc sites on the (111) surfaces is very small. Copyright © 2017 John Wiley & Sons, Ltd.     

Conformational Switching through the One-Electron Reduction of an Acridinium-based, γ-Cationic Phosphine Gold Complex

Our efforts in the chemistry of gold complexes featuring ambiphilic phosphine-carbenium L/Z-type ligand have led us to consider the reduction of the carbenium moiety as a means to modulate the gold–carbenium interaction present in these complexes. Here, it was shown that the one-electron reduction of [(o-Ph₂P(C₆H₄)Acr)AuCl]⁺ (Acr=9-N-methylacridinium) produces a neutral stable radical, the structure of which showed a marked increase in the Au–Acr distance. Related structural changes were observed for the phosphine oxide analogue [(o-Ph₂P(O)(C₆H₄)Acr]⁺, the reduction of which interfered with the P=O→carbenium interaction. These structural effects, driven by a reduction-induced change in the electronic and electrostatic characteristics of the compounds, showed that the charge and accepting properties of the carbenium unit can be modulated. These results highlight the redox-noninnocence of carbenium Z-type ligand, a feature that can be exploited to induce specific conformational changes.     

CtrA gene based electrochemical DNA sensor for detection of meningitis

Electrochemical DNA sensor has been fabricated by immobilizing thiolated single stranded oligonucleotide (ssDNA) probe onto gold (Au) coated glass electrode for meningitis detection using hybridization with complementary DNA (CtrA) in presence of methylene blue (MB). These electrodes (ssDNA/Au and dsDNA/Au) have been characterized using atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) technique. The DNA/Au electrode can detect the complementary DNA in the range of 7–42 ng/μl in 5 min (hybridization) with response time 60 s and electrode is stable for about 4 months when stored at 4 °C. The sensitivity of dsDNA/Au electrode is 115.8 μA/ng with 0.917 regression coefficient (R).     

Ligand-enforced intimacy between a gold cation and a carbenium ion: impact on stability and reactivity

Controlling the reactivity of transition metal complexes by positioning non-innocent functionalities around the catalytic pocket is a concept that has led to significant advances in catalysis. Here we describe our efforts toward the synthesis of dicationic phosphine gold complexes of general formula [(o-Ph₂P(C₆H₄)Carb)Au(tht)]²⁺ decorated by a carbenium moiety (Carb) positioned in the immediate vicinity of the gold center. While the most acidic examples of such compounds have limited stability, the dicationic complexes with Carb⁺ = 9-N-methylacridinium and Carb⁺ = [C(Ar^N)₂]⁺ (Ar^N = p-(C₆H₄)NMe₂) are active as catalysts for the cycloisomerization of N-propargyl-4-fluorobenzamide, a substrate chosen to benchmark reactivity. The dicationic complex [(o-Ph₂P(C₆H₄)C(Ar^N)₂)Au(tht)]²⁺, which also promotes hydroarylation and enyne cyclization reactions, displays a higher catalytic activity than its acridinium analog, indicating that the electrophilic reactivity of these complexes scales with the Lewis acidity of the carbenium moiety. These results support the role of the carbenium unit as a non-innocent functionality which can readily enhance the activity of the adjacent metal center. Finally, we also describe our efforts toward the generation and isolation of free γ-cationic phosphines of general formula [(o-Ph₂P(C₆H₄)Carb)]⁺. While cyclization into phosphonium species is observed for Carb⁺ = [C(Ar^N)₂]⁺, [C(Ph)(Ar^N)]⁺, and 9-xanthylium, [(o-Ph₂P(C₆H₄)-9-N-methylacridinium)]⁺ can be isolated as an air stable, biphilic derivative with uncompromised Lewis acidic and basic properties.

This work describes the synthesis of carbenium-based, γ-cationic phosphines and their coordination to Au(i) cations , leading to carbophilic catalysts whose activity is enhanced by the ligand-enforced convergence of the positively charged moieties.     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.     

Bioelectrocatalytic current based on direct heterogeneous electron transfer reaction of glucose oxidase adsorbed onto multi-walled carbon nanotubes synthesized on platinum electrode surfaces

Multi-walled carbon nanotubes (MWCNTs) were synthesized on platinum plate electrodes by the chemical vapor deposition (CVD) method. The MWCNTs synthesized on the Pt plate (MWCNTs/Pt) electrode were immediately immersed into solutions of glucose oxidase (GOX) to immobilize these enzymes onto the MWCNTs/Pt electrode surfaces. After the GOX was immobilized onto the MWCNTs/Pt electrode, a well-defined catalytic oxidation current was increased from ca. −0.45 V (vs. Ag/AgCl/saturated KCl), which was close to the redox potential of flavin adenine dinucleotide (FAD) as a prosthetic group of GOX under physiological pH values.     

Quasi-reversible two-electron reduction of oxygen at gold electrodes modified with a self-assembled submonolayer of cysteine

The electrochemical reduction of molecular oxygen (O₂) has been performed at gold electrodes modified with a submonolayer of a self-assembly (sub-SAM/Au) of a thiol compound (typically cysteine (CYST)) in O₂-saturated 0.5 M KOH. At bare gold electrode O₂ reduction reaction proceeds irreversibly, while this reaction is totally hindered at gold electrodes with a compact structure of CYST over its surface. The partial reductive desorption of the compact CYST monolayer was achieved by controlling the potential of the CYST/Au electrode, leading to the formation of a submonolayer coverage of the thiol compound over the Au electrode surface (sub-SAM/Au), at which the CYST molecules selectively block the Au(1 0 0) and Au(1 1 0) fractions (the so-called rough domains) of the polycrystalline Au while the Au(1 1 1) component (the so-called smooth domains) remains bare (i.e., uncovered with CYST). This sub-SAM/Au electrode extraordinarily exhibits a quasi-reversible two-electron reduction of molecular oxygen (O₂) in alkaline medium with a peak separation (ΔE_p) between the cathodic and anodic peak potentials (E_p^c,E_p^a) of about 60 mV. The ratio of the anodic current to the cathodic one is close to unity. The formal potential (E^o′) of this reaction is found to equal −150 mV vs. Ag/AgCl/KCl(sat.).     

Comparison of metallic electrodes for constant-potential amperometric detection of carbohydrates,amino acids and related compounds in flow systems

Constant-potential amperometric detection of carbohydrates, amino acids, and other aliphatic organic compounds is possible by means of their oxidation in alkaline solution at a variety of metal/metal oxide electrodes including Pt, Au, Cu, Ni, Ag and Co. The experimental conditions required for optimum detection and the analytical performance obtainable vary widely for different electrode materials and analytes. In this work, the cyclic voltammetric behavior exhibited by selected analytes (glucose, glycine, lactic acid, ethylamine and ethanol) at each of these electrodes was used to determine the optimum potentials suitable for flow detection so that the capabilities of the different metal electrodes could be evaluated and systematically compared. In general, the Cu electrode was found to provide superior detection capabilities in terms of its range of response, detection limits and especially stability. Despite the fact that Pt and Au are typically used only with a pulsed applied potential, both can provide long-lived constant-potential detection of carbohydrates and other analytes at low concentrations if the potentials ere carefully chosen and the electrodes are allowed to undergo an initial stabilization period.     

Monolayer deposition of silver and copper onto platinum electrodes at non-equilibrium conditions

Ag and Cu were deposited in submonolayer amounts onto Pt electrodes at constant cathodic potentials within the hydrogen adsorption region. Rectangular pulses of Cu²⁺ or Ag⁺ fluxes to the Pt surface were generated by a Cu or Ag generator electrode using the twin electrode thin-layer technique. The analysis of the response currents of the Pt electrode yields in formation about the metal deposition process at non-equilibrium conditions. Cu and Ag were found to deposit directly as monolayers and not at random. The displacement of adsorbed hydrogen was measured as a function of the quantity of metal deposited.     

The one-electron cleavage of benzylic bromides at palladium and palladized cathodes: Benzyl radicals generation and immobilization onto solid interfaces

Benzyl bromide 1 and 4-nitrobenzyl bromide 2 are reduced at solid electrodes in propylene carbonate (PC) and dimethylformamide (DMF) containing tetraalkylammonium salts. Palladium electrodes and these covered with layers of Cu–Pd, Ag–Pd, Au–Pd, and Ni–Pd were especially found to favour the one-electron scission of the C–Br bond. Under these conditions, 1 and 2 are reduced in two separated steps assigned to the transient formation of a free radical capable to couple or to add onto the cathodic material. The formation of benzyl radical allows the in situ addition onto unsaturated organic systems (mono- and di-benzylations). The formation of benzylic radical was confirmed by ESR technique (trapping the paramagnetic intermediate with nitrones). Lastly, preliminary experiments were achieved in order to test the grafting feasibility of benzyl radicals onto cathodic interfaces.     

Thiol Modified Chitosan Self-Assembled Monolayer Platform for Nucleic Acid Biosensor

A self-assembled monolayer (SAM) of thiol modified chitosan (SH-CHIT), with thioglycolic acid (TGA) as a modifier to bestow thiol groups, has been prepared onto gold (Au)-coated glass plates for fabrication of the nucleic acid biosensor. The chemical modification of CHIT via TGA has been evidenced by Fourier transform infrared spectroscopy (FT-IR) studies, and the biocompatibility studies reveal that CHIT retains its biocompatible nature after chemical modification. The electrochemical studies conducted onto SH-CHIT/Au electrode reveal that thiol modification in CHIT amino end enhances the electrochemical behavior indicating that it may be attributed to delocalization of electrons in CHIT skeleton that participates in the resonance process. The carboxyl group modified end of DNA probe has been immobilized onto SH-CHIT/Au electrode using N-ethyl-N′-(3-dimethylaminopropyl)carbodimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for detection of complementary, one-base mismatch and non-complementary sequence using electrochemical and optical studies for Mycobacterium tuberculosis detection. It has been found that DNA-SH-CHIT/Au bioelectrode can specifically detect 0.01 μM of target DNA concentration with sensitivity of 1.69?×?10^?6 A μM^?1.     

In Situ Renewal of Working Surfaces of Solid Indicator Electrodes and Their Use in Electroanalysis

The design of a device for the rapid regeneration of the indicator electrode surface in a test solution is discussed. The results of testing this device are presented. The device allows obtaining reproducible areas and properties of the surfaces of solid indicator electrodes by mechanically cutting 0.1–5-μm surface layers. The best reproducibility of these parameters is attained when a hexanite-R cutter is used. The serviceability of the cutter is more than 10⁵ cuts. The high-quality renewal of electrode surfaces is achieved by cutting a 4– 5-μm layer of metallic (Pt, Ag, Au, Cu, Cd, Zn, Co, Ni, etc.) electrodes and a 0.1–1.5-μm layer of graphite and graphite-based electrodes. Optimum tool angles of the cutter for all types of solid electrodes are selected. Long-term tests of the developed technique for the mechanical renewal of electrode surface confirm that the electrode surface area is well reproducible in the series of 10⁴ measurements of the analytical signal (RSD = 0.2–0.6%). Examples are given that point to the enhancement of the electrochemical activity of the surfaces of some electrodes renewed in situ in a solution without their exposure to air. It is shown that the mechanical regeneration of the electrode surface in the solution is the main condition for depositing metals under high-voltage (up to 1000 V) conditions for electroaccumulation. The advantages of the proposed technique are exemplified by determining the concentrations of cations, anions, and some organic substances by direct and stripping voltammetry. __________ Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 12, 2005, pp. 1284–1295. Original Russian Text Copyright ? 2005 by Skvortsova, Aleksandrova, Tarasova, Kiryushov, Zamyatin.     

Efficient Electrocatalytic Detection of Epinephrine at Gold Electrodes Modified with Self‐Assembled Metallo‐Octacarboxyphthalocyanine Complexes

Electrocatalysis of epinephrine at gold electrode pre‐modified with the self‐assembled monolayer of cysteamine and subsequently integrated with novel metallo‐octacarboxyphthalocyanine (MOCPc where M=Fe, Co and Mn) complexes (Au‐Cys‐MOCPc) was investigated. The electrodes showed response to the presence of epinephrine. The oxidation peak potential (E_p/V vs. Ag|AgCl, sat'd KCl) and charge transfer resistance (R_ct (kΩ)) in epinephrine solution depend markedly on the central metal of the phthalocyanine cores: Au‐Cys‐FeOCPck_ch=4.1×10⁷ M^?1 s^?1) which is higher than that of the Au‐cys‐CoOCPc or Au‐cys‐MnOCPc electrode. Mechanism, recognizing the mediation of the electrocatalytic process by the central M(II)/M(III) redox processes was proposed. Epinephrine electro‐oxidation at the Au‐cys‐FeOCPc electrode was studied in more details for the response characteristics. The diffusion coefficient of epinephrine was evaluated as (2.62±0.23)×10^?9 cm² s^?1. It was established that Au‐Cys‐FeOCPc is suitable for sensitive determination of epinephrine in physiological pH (7.40) conditions showing linear concentration range of up to 300 nM, with excellent sensitivity (0.53±0.01 nA nM^?1), and very low limits of detection (13.8 nM) and quantification (45.8 nM). The peak separation between ascorbic acid and epinephrine is large enough (190 mV) to permit simultaneous determination of both epinephrine and ascorbic acid in physiological pH 7.4 conditions using the Au‐cys‐FeOCPc electrode. Au‐cys‐FeOCPc electrode was successfully used for the determination of epinephrine in epinephrine hydrochloric acid injection with recovery of ca. 98.4%.     

Impact of Top Electrodes (Cu,Ag, and Al) on Resistive Switching behaviour of Cu-rich Cu2ZnSnS4 (CZTS) Ideal Kesterite

Cu₂ZnSnS₄ (CZTS) active material-based resistive random-access memory (RRAM) devices are investigated to understand the impact of three different Cu, Ag, and Al top electrodes. The dual resistance switching (RS) behaviour of spin coated CZTS on ITO/Glass is investigated up to 10² cycles. The stability of all the devices (Cu/CZTS/ITO, Ag/CZTS/ITO, and Al/CZTS/ITO) is investigated up to 10³ sec in low- (LRS) and high- (HRS) resistance states at 0.2 V read voltage. The endurance up to 10² cycles with 30 msec switching width shows stable write and erase current. Weibull cumulative distribution plots suggest that Ag top electrode is relatively more stable for set and reset state with 33.61 and 25.02 shape factors, respectively. The charge carrier transportation is explained by double logarithmic plots, Schottky emission plots, and band diagrams, substantiating that at lower applied electric field intrinsic copper ions dominate in Cu/CZTS/ITO, whereas, at higher electric filed, top electrodes (Cu and Ag) dominate over intrinsic copper ions. Intrinsic Cu⁺ in CZTS plays a decisive role in resistive switching with Al electrode. Further, the impedance spectroscopy measurements suggest that Cu⁺ and Ag⁺ diffusion is the main source for the resistive switching with Cu and Ag electrodes.     

First Principles Calculations Toward Understanding SERS of 2,2′-Bipyridyl Adsorbed on Au,Ag, and Au–Ag Nanoalloy

First principles electrodyanmics and quantum chemical simulations are performed to gain insights into the underlying mechanisms of the surface enhanced Raman spectra of 22BPY adsorbed on pure Au and Ag as well as on Au–Ag alloy nanodiscs. Experimental SERS spectra from Au and Ag nanodiscs show similar peaks, whereas those from Au–Ag alloy reveal new spectral features. The physical enhancement factors due to surface nano-texture were considered by numerical FDTD simulations of light intensity distribution for the nano-textured Au, Ag, and Au–Ag alloy and compared with experimental results. For the chemical insights of the enhancement, the DFT calculations with the dispersion interaction were performed using Au₂₀, Ag₂₀, and Au₁₀Ag₁₀ clusters of a pyramidal structure for SERS modeling. Binding of 22BPY to the clusters was simulated by considering possible arrangements of vertex and planar physical as well as chemical adsorption models. The DFT results indicate that 22BPY prefers a coplanar adsorption on a (111) face with trans-conformation having close energy difference to cis-conformation. Binding to pure Au cluster is stronger than to pure Ag or Au–Ag alloy clusters and adsorption onto the alloy surface can deform the surface. The computed Raman spectra are compared with experimental data and assignments for pure Au and Ag models are well matching, indicating the need of dispersion interaction to reproduce strong Raman signal at around 800 cm^–1. This work provides insight into 3D character of SERS on nanorough surfaces due to different binding energies and bond length of nanoalloys. © 2018 Wiley Periodicals, Inc.     

Gold nanoparticle/alkanedithiol conductive films self-assembled onto gold electrode: Electrochemistry and electroanalytical application for voltammetric determination of trace amount of catechol

This paper describes novel electrochemical properties of gold nanoparticles/alkanedithiol conductive films and their electroanalytical applications for voltammetric determination of trace amount of one kind of environmental pollutants, catechol. The conductive films are prepared by closely packing 12-nm diameter gold nanoparticles (Au-NPs) onto Au electrodes modified with the self-assembled monolayers (SAMs) of alkanedithiols (i.e., HS(CH₂)_nSH, n = 3, 6, 9). The assembly of the Au-NPs onto the SAM-modified electrodes essentially restores the heterogeneous electron transfer between Au substrate and redox species in solution phase that is almost totally blocked by the SAMs and, as a result, the prepared Au-NP/SAM-modified electrodes possess a good electrode reactivity without a remarkable barrier toward the heterogeneous electron transfer. Moreover, the prepared Au-NP/SAM-modified electrodes are found to exhibit a largely reduced interfacial capacitance, compared with bare Au electrode. These electrochemical properties of the Au-NP/SAM-modified electrodes essentially make them very useful for electroanalytical applications, which is illustrated by voltammetric determination of trace amount detection of environmental pollutant, catechol.     

Reflection anisotropy spectroscopy study of the adsorption of sulfur-containing amino acids at the Au(110)/electrolyte interface

Protein interactions with surfaces are key to understanding the behavior of implantable medical devices. The optical technique of reflection anisotropy spectroscopy (RAS) has considerable potential for the study of interactions between important biological molecules and surfaces. This study used RAS to investigate the adsorption of S amino acids onto Au(110) in a liquid environment under different conditions of potential and pH. Certain spectral features can be associated with the Au(110), as reported previously, while other features are assigned to bonds between the amino acids and the Au surface. The RA spectra are shown to be influenced by the structure of the amino acid, the solution pH, and the applied electrode potential. This work has assigned the negative feature at 2.5 eV to the Au-thiolate, bond while the positive feature at 2.5 eV is assigned to the disulfide bond. The broad spectral feature at 3.5 eV is attributed to the Au-amino interaction, while the sharper feature at slightly higher energy is associated with the Au-carboxylate interaction. Sulfur-containing amino acids are frequently found on the outside of protein molecules and could be used to anchor the protein to the surface.