Umpolung of chiral 2-ethynylaziridines: Indium(I)-mediated stereoselective synthesis of nonracemic 1,3-amino alcohols bearing three chiral centers, catalyzed by palladium(0)

Treatment of 3-alkyl-2-ethynylaziridines with InI in the presence of Pd(PPh(3))(4) and H(2)O gave allenylindium reagents bearing a protected amino group in high yields. Stereoselective addition of the allenylindium to aldehydes affords 2-ethynyl-1,3-amino alcohols bearing three chiral centers in good yields.     

Stereoselective synthesis of C5-C20 and C21-C34 subunits of the core structure of the aplyronines. Applications of enantioselective additions of chiral allenylindium reagents to chiral aldehydes

The stereoselective synthesis of a C5-C20 and a C21-C34 subunit of the aplyronine family of polyketide marine macrolides has been achieved. These subunits contain all 15 stereocenters of the core structure. Six of the 15 stereocenters were introduced through enantioselective and diastereoselective additions of chiral allenylindium reagents to alpha-methyl-beta-oxygenated propionaldehydes. The products of these additions were further transformed by reactions involving the terminal alkynyl substituent produced in the addition reactions. Unlike previous applications of this methodology, the present synthesis employs Pd(0)-catalyzed transmetalations of chiral allenylpalladium intermediates to generate the chiral allenylindium reagents in situ.     

Synthesis of the C6-C21 segment of amphidinolide E

[reaction: see text] A convergent approach to a C6-C21 segment of the polyketide amphidinolide E has been developed through combination of three subunits by allenylindium bromide-aldehyde addition and Suzuki sp2-sp3 coupling.     

2-ethynylaziridines as chiral carbon nucleophiles: stereoselective synthesis of 1,3-amino alcohols with three stereocenters via allenylindium reagents bearing a protected amino group

Allenylindium reagents bearing a protected amino group were effectively prepared from N-protected 3-alkyl-2-ethynylaziridines by treatment with InI in the presence of Pd(PPh(3))(4) and H(2)O. Stereoselective addition of the allenylindium to aliphatic or aromatic aldehydes affords 1,3-amino alcohols bearing three contiguous chiral centers: while 2,3-trans-2-ethynylaziridines yield syn,syn-2-ethynyl-1,3-amino alcohols predominantly, 2,3-cis-aziridines give anti,syn isomers selectively. Synthesis of highly substituted ethynylazetidines is also described.     

Palladium-catalyzed carbon-sulfur cross-coupling reactions with indium tri(organothiolate) and its application to sequential one-pot processes

It was found that indium tri(organothiolate) is an effective nucleophilic coupling partner in Pd-catalyzed C-S cross-coupling reactions to produce the functionalized sulfides in excellent yields with high atom efficiency and complete regio- and chemoselectivity. The present method was efficiently applied to the sequential one-pot processes composed of selective double C-S cross-coupling reactions and addition of allylindium or allenylindium to aldedyde to give the functionalized sulfides and bis(sulfides).     

Formal synthesis of dictyostatin and synthesis of two dictyostatin analogues

A formal convergent synthesis of dictyostatin from (R)-Roche ester is described. Synthetic highlights include a Ni-catalyzed Nozaki-Hiyama-Kishi coupling between an aldehyde and a Z vinyl iodide to assemble the two main fragments, a diastereoselective Myers alkylation, a stereoselective Evans aldolization, two asymmetric Duthaler crotyltitanations, and a stereoselective Pd-catalyzed Marshall allenylindium addition to install the stereogenic centers of dictyostatin. The synthesis of (9R)-epi-dictyostatin and a new ring-contracted dictyostatin isomer were also achieved.     

Reaction of allenylmagnesium and allenylindium bromides with nitrile oxides: synthesis of novel 5-butynyl- and 5-methylisoxazoles

5-Butynylisoxazoles were obtained in high yields through a domino addition, C-O heterocyclization involving allenylmagnesium bromide and benzonitrile oxide in dry THF, in which the corresponding 5-methylisoxazoles were isolated in trace amounts. However, when the reactions were attempted in aqueous media using allenylindium bromide, 5-methylisoxazoles were formed as the sole products in high yields.     

In situ generation of vinyl allenes and its applications to one-pot assembly of cyclohexene, cyclooctadiene, 3,7-nonadienone, and bicyclo[6.4.0]dodecene derivatives with palladium-catalyzed multicomponent reactions

A novel tandem Pd-catalyzed cross-coupling and [4 + 4] cycloaddition sequence allows the rapid synthesis of eight-membered carbocycles starting from alpha-bromovinyl arenes and propargyl bromides in one reaction vessel. It is noteworthy that four components are assembled into one molecule via this procedure. In contrast to alpha-bromovinyl arenes, alpha-bromovinyl alkanes afforded tandem cross-coupling and homo [4 + 2] cycloaddition products. Subjecting an equimolar mixture of alpha-bromostyrene and 2-bromo-1-octene to propargyl bromides furnished the tandem Pd-catalyzed cross-coupling and hetero [4 + 2] cycloaddition product. Exposure of equimolar mixtures of alpha-bromovinyl arenes to allenylindium resulted in tandem a Pd-catalyzed cross-coupling and hetero [4 + 4] cycloaddition products. Synthesis of vinylallene from the reaction of vinyl triflate with allenylindium followed by Pd-catalyzed carbon monoxide insertion reaction gave the corresponding 3,7-nonadienone product via tandem Pd-catalyzed cross-coupling and [4 + 4 + 1] annulation. Tandem Pd-catalyzed cross-coupling, [4 + 4] cycloaddition, and [4 + 2] cycloaddition provided the rapid synthesis of bicyclo[6.4.0]dodecene derivatives starting from alpha-bromovinyl arenes, propargyl bromides, and dienophiles in one operation, in which five components were integrated into one molecule.     

Indium-mediated asymmetric Barbier-type propargylations: additions to aldehydes and ketones and mechanistic investigation of the organoindium reagents

We report a simple, efficient, and general method for the indium-mediated enantioselective propargylation of aromatic and aliphatic aldehydes under Barbier-type conditions in a one-pot synthesis affording the corresponding chiral alcohol products in very good yield (up to 90%) and enantiomeric excess (up to 95%). The extension of this methodology to ketones demonstrated the need for electrophilic ketones more reactive than acetophenone as the reaction would not proceed with just acetophenone. Using the Lewis acid indium triflate [In(OTf)(3)] induced regioselective formation of the corresponding homoallenic alcohol product from acetophenone. However, this methodology demonstrated excellent chemoselectivity in formation of only the corresponding secondary homopropargylic alcohol product in the presence of a ketone functionality. Investigation of the organoindium intermediates under our reaction conditions shows the formation of allenylindium species, and we suggest that these species contain an indium(III) center. In addition, we have observed the presence of a shiny, indium(0) nugget throughout the reaction, irrespective of the stoichiometry, indicating disproportionation of indium halide byproduct formed during the reaction.     

Direct synthesis of B-allyl and B-allenyldiisopinocampheylborane reagents using allyl or propargyl halides and indium metal under Barbier-type conditions

We report the first one-pot process for the asymmetric addition of allyl, methallyl, and propargyl groups to aldehydes and ketones using B-chlorodiisopinocampheylborane ((d)DIP-Cl) and indium metal. Under Barbier-type conditions, indium metal was used to generate allyl- and allenylindium intermediates, and subsequent reaction with (d)DIP-Cl successfully promoted the transfer of these groups to boron forming the corresponding chiral borane reagents. The newly formed borane reagents were reacted with aldehydes and ketones to produce the corresponding alcohol products in high yields and up to excellent enantioselectivity (98% ee). This method produced excellent enantioenriched secondary homoallylic alcohols from the allylation and methallylation of benzaldehyde. Using this method, the methallylation and cinnamylation of ketones afforded the highest enantioselectivities, while the propargylation of both aldehydes and ketones provided low enantiomeric excesses. In addition, this procedure provided the first synthesis of B-allenyldiisopinocampheylborane, which was characterized by (1)H and (11)B NMR spectroscopy. This is the first example of the direct synthesis of allylboranes that contained substitutions from the corresponding allyl bromide and indium, thereby expanding the utility of the DIP-Cl reagent. Hence, a general and straightforward route to these chiral organoborane reagents in one-pot has been developed along with the asymmetric Barbier-type allylation and propargylation of aldehyde and ketone substrates using these chiral organoborane reagents in subsequent coupling reactions.     

Thermosensitive hairy hybrid nanoparticles synthesized by surface-initiated atom transfer radical polymerization

This article reports on the synthesis of thermosensitive polymer brushes on silica nanoparticles by atom transfer radical polymerization (ATRP) and the study of thermo-induced phase transitions in water. Silica nanoparticles were prepared by the St?ber process and the surface was functionalized by an ATRP initiator. Surface-initiated ATRPs of methoxydi(ethylene glycol) methacrylate (DEGMMA) and methoxytri(ethylene glycol) methacrylate (TEGMMA) were carried out in THF at 40 degrees C in the presence of a free initiator, benzyl 2-bromoisobutyrate. The polymerizations were monitored by 1H NMR spectroscopy and gel permeation chromatography. The hairy hybrid nanoparticles were characterized by thermogravimetric analysis and scanning electron microscopy, and the thermoresponsive properties were investigated by variable temperature 1H NMR spectroscopy and dynamic light scattering. The cloud points of free poly(DEGMMA) and poly(TEGMMA) in water were around 25 and 48 degrees C, respectively. The thermo-induced phase transitions of polymer brushes on silica nanoparticles began at a lower temperature and continued over a broader range (4-10 degrees C) than those of free polymers in water (< 2 degrees C).     

Preparation and characterization of poly(isobutyl methacrylate) microbeads with grafted amidoxime groups

Poly(isobutyl methacrylate) (PiBMA) microspheres with a 800- to 1500-μm diameter range synthesized by suspension polymerization technique were used as the trunk polymer in the preparation of a highly efficient new adsorbent. Glycidyl methacrylate (GMA) was grafted onto the trunk polymer by pre-irradiation grafting technique. Grafting conditions were optimized, and GMA grafted PiBMA beads were modified with iminodiacetonitrile (IDAN) in ethanol at 80 °C. The nitrile groups were then amidoximated by using 6% (m/v) hydroxylamine hydrochloride in methanol solution. The IDAN modification and the conversion of the nitrile groups to amidoxime were followed by FT-IR spectroscopy. The surface morphology and thermal behavior of the PiBMA and its modificated forms were also characterized by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques further confirming modification and amidoximation.     

Diffusion coefficients of C60 and C60- in benzonitrile and dichloromethane solutions containing tetrabutylammonium perchlorate, measured by potential-step chronoamperometry.

The diffusion coefficients of C(60) in dichloromethane and benzonitrile solutions containing 0.1 M tetrabutylammonium perchlorate were determined by single potential-step chronoamperometry at small disk electrodes. The diffusion coefficients of C(60) were obtained by curve fitting of the chronoamperograms to a theoretical equation by Shoup and Szabo. The values were (1.4 +/- 0.3) x 10(-9) and (4.1 +/- 0.3) x 10(-10) m(2) s(-1), respectively (the errors are 95% confidence limits). The diffusion coefficients of C(60)(-) in these solutions were measured by double potential-step chronoamperometry. The ratios of the diffusion coefficients of C(60) to those of C(60)(-) were obtained from theoretical curves of the ratios of the current at the second potential step to the current at the first one. The values of the ratios were 1.2 +/- 0.2 and 1.0 +/- 0.3, respectively.     

Production yields of H(D) atoms in the reactions of N(2)(A (3)Sigma(u) (+)) with C(2)H(2), C(2)H(4), and their deuterated variants

The production yields of H(D) atoms in the reactions of N(2)(A (3)Sigma(u) (+)) with C(2)H(2), C(2)H(4), and their deuterated variants were determined. N(2)(A (3)Sigma(u) (+)) was produced by excitation transfer between Xe(6s[32](1)) and ground-state N(2) followed by collisional relaxation. Xe(6s[32](1)) was produced by two-photon laser excitation of Xe(6p[12](0)) followed by concomitant amplified spontaneous emission. H(D) atoms were detected by using vacuum-ultraviolet laser-induced fluorescence (LIF). The H(D)-atom yields were evaluated from the LIF intensities and the overall rate constants for the quenching, which were determined from the temporal profiles of the NO tracer emission. The absolute yields were evaluated by assuming that the yield for NH(3)(ND(3)) is 0.9. Although no HD isotope effects were observed in the overall rate constants, there were isotope effects in the H(D)-atom yields. The H-atom yields for C(2)H(2) and C(2)H(4) were 0.52 and 0.30, respectively, while the D-atom yields for C(2)D(2) and C(2)D(4) were 0.33 and 0.13, respectively. The presence of isotope effects in yields suggests that H(2)(D(2)) molecular elimination processes are competing and that molecular elimination is more dominant in deuterated species than in hydrides.     

LiCl-Li2B4O7-H2O体系在298.15 K下热力学性质的等压研究

用等压法研究了298.15 K下LiCl-Li2B4O7-H2O体系在不同LiB4O7质量摩尔浓度时的等压平衡浓度,  水活度; 计算了LiCl和Li2B4O7混合盐溶液的渗透系数等热力学性质. 用298.15 K下的实验数据对Pitzer离子相互作用模型进行了参数化研究, 拟合求取了298.15 K下Pitzer离子相互作用参数, 用获得的参数计算了LiCl和Li2B4O7在LiCl-Li2B4O7-H2O体系中的活度系数. Pitzer模型计算的渗透系数值与实验结果一致.     

新型NO供体的合成及其体外释放NO性能

新型NO供体的合成及其体外释放NO性能;金属卟啉;NO载体;合成;体外释NO作用     

Determination of isoproterenol and uric acid by voltammetric method using carbon nanotubes paste electrode and p-chloranil

Stable and even microcrystals of Avermectin (AVM) were produced by recrystallization in presence of a stabilizer. Sequential layer growth was achieved by the layer-by-layer (LbL) self-assembly of biocompatible polyelectrolytes (PEs). The coated colloids were characterized using confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The in vitro release of Avermectin from microcapsules was studied under the simulated insect midgut conditions. W-doped TiO(2) photocatalysts were synthesized by a simple hydrothermal method, and characterized by Brunauer-Emmett-Teller (BET) surface area measurements and SEM. The photocatalytic activities of photocatalysts, which were undoped with TiO(2) and W-doped TiO(2), were evaluated by the photocatalytic oxidation degradation of AVM microcapsules in aqueous solution under UV illumination. The toxicity of the photodegradable insecticide was evaluated by the adult stage Martianus dermestoides. The results showed that AVM microcrystals which were obtained by association had a mean length of 13.8μm and a zeta potential of -34.7mV. The drug loading and encapsulation efficiency were 65.57±0.96% and 46.15±0.96%, respectively. The in vitro release experiments revealed that the polyelectrolytes prolonged the release time of the encapsulated AVM microcrystals. The sample which was prepared at 120°C with 4.0mol% W-doped amount had the highest photocatalytic activity. Toxicity of the novel photodegradable insecticide was higher in the adult stage compared to the 95% AVM as indicated by the lower LC(50) value.     

自组装制备聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)壳交联胶束

以1-氯代乙苯为引发剂、氯化亚铜/N,N,N′,N″,N″-五甲基二乙撑三胺(PMDETA)为催化体系、丁酮-异丙醇为混合溶剂,通过原子转移自由基聚合法制备不同分子量的大分子引发剂聚丙烯酸叔丁酯(1-PECl)及不同嵌段比的两亲性嵌段共聚物聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)(P(tBA-b-DMAEMA))。通过1H-NMR表征了P(tBA-b-DMAEMA)的结构,GPC测试了其分子量及分子量分布。P(tBA-b-DMAEMA)在选择性溶剂中自组装形成核-壳结构的胶束,引用了乙烯基乙二醇二碘醚(BIEE)为交联剂与链段PDMAEMA发生化学交联反应从而得到稳定的壳交联胶束结构,并通过马尔文粒径仪研究了自组装所得胶束的温度及pH敏感性。     

Shape controlled synthesis of CaMoO4 thin films and their photoluminescence property

CaMoO₄ (CMO) disordered and ordered thin films were prepared by the complex polymerization method (CPM). The films were annealed at different temperatures and time in a conventional resistive furnace (RF) and in a microwave (MW) oven. The microstructure and surface morphology of the structure were monitored by atomic force microscopy (AFM) and high-resolution scanning electron microscopy (HRSEM). Order and disorder were characterized by X-ray diffraction (XRD) and optical reflectance. A strong photoluminescence (PL) emission was observed in the disordered thin films and was attributed to complex cluster vacancies. The experimental results were compared with density functional and Hartree-Fock calculations.     

Synthesis and Characterization of New Functional Poly(ester-anhydride)s Based on Succinic and Sebacic Acids

Summary: New functional poly(ester-anhydride)s with allyl pendant groups in the side chains were obtained by polycondensation of sebacic acid (SBA) and poly(3-allyloxy-1,2-propylene succinate) (OSAGE) terminated with carboxyl groups. The carboxyl groups in OSAGE and in SBA were converted to mixed anhydride groups by acetylation with acetic anhydride. After that, prepolymers obtained were condensed in vacuum to yield higher molecular weight poly(ester-anhydride)s. The influence of SBA and OSAGE content in poly(ester-anhydride)s on their selected properties e.g. molecular weight, thermal and solubility characteristics as well as degradation rate and mode, were examined. Poly(ester-anhydride)s were degraded in aqueous buffer of pH 7.4 at 37 °C. The hydrolytic degradation was monitored by determination of weight loss of samples and by determination of ester to anhydride groups ratio.