A Novel Hg<Superscript>2+</Superscript> Selective Ratiometric Fluorescent Chemodosimeter Based on an Intramolecular FRET Mechanism

A irreversible Hg²⁺ selective ratiometric fluorescence probe FR, a fluorescein fluorophore linked to a rhodamine B hydrazide by a thiourea spacer, was designed and synthesized. The developed probe FR exhibited great ratiometric fluorescence enhancement and remarkable yellow-magenta color change toward Hg²⁺ with excellent selectivity in aqueous acetone solution, and the ratiometric fluorescence response to Hg²⁺ was not interfered by other metal cations including Fe³⁺, Co²⁺, Ni²⁺, Cr³⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺ and Mn²⁺. The linear range and the detection limit of this supposed ratiometric fluorescence method for Hg²⁺ were 0.0–10.0 × 10⁻⁶ and 5 × 10⁻⁸ M, respectively.     

Spectrofluorimetric Assessment of Doxycycline Hydrochloride in Pharmaceutical Tablets and Serum Sample Based on the Enhancement of the Luminescence Intensity of the Optical Sensor Sm<Superscript>3+</Superscript> Ion

A simple and sensitive spectrofluorimetric method for determination of trace amount of doxycycline hydrochloride (DC) in pharmaceutical tablets and serum samples was developed. In ammonia buffer solution of pH 8.9 the doxycycline hydrochloride can remarkably enhance the luminescence intensity of the Sm³⁺ ion in Sm³⁺- DC complex at λ_ex = 400 nm. The produced luminescence intensity of Sm³⁺- DC complex in DMSO is in proportion to the concentration of DC and used as optical sensor for its determination. The dynamic range for the determination of DC is 1 × 10⁻⁸ – 5 × 10⁻⁶ mol L⁻¹ and in case of quantum yield calculations is 7 × 10⁻⁹ – 5 × 10⁻⁶ mol L⁻¹ with detection limit of 6.5 × 10⁻¹⁰ mol L⁻¹. The enhancement mechanism of the luminescence intensity in the Sm³⁺- DC system has been also discussed. A comparison with other spectrofluorimetric methods for tetracycline derivatives in which Eu³⁺ ion is used instead of Sm³⁺ ion is also studied.     

Studies on Interaction of Norfloxacin,Cu<Superscript>2+</Superscript>, and DNA by Spectral Methods

The interactions of norfloxacin (NFA), DNA, and Cu²⁺ are studied by fluorescence and UV-spectra method. According to the experimental results, it can be concluded that NFA can form a steady binary complex with Cu²⁺. There is a linear relationship between the Fluorescence intensity of the norfloxacin–Cu²⁺–DNA system and the concentration of DNA. And when the concentration of the NFA is 1.95×10⁻⁵ mol L⁻¹, they possess a good linearity in the concentration of DNA ranged from 4.7×10⁻⁶ to 2.8×10⁻⁵ mol L⁻¹.It is a good method due to the high sensitivity and selectivity.     

A Fe<Superscript>3+</Superscript>/Hg<Superscript>2+</Superscript>-Selective Anthracene-Based Fluorescent PET Sensor with Tridentate Ionophore of Amide/β-Amino Alcohol

A new anthracene-based fluorescent PET sensor 1 with a tridentate ionophore of amide/β-amino alcohol displays very good selectivity and sensitivity for Fe³⁺ (K _a = 1.6 × 10³ M⁻¹) and Hg²⁺ (K _a = 2.1 × 10³ M⁻¹) in CH₃CN–H₂O (3:7, v/v) with detection limit of 1 μM. More fluorescence enhancement was observed when 1 selectively detected Fe³⁺ or Hg²⁺ in CH₃CN and its detection limit was up to 0.03 μM.     

Determination of Enantiomeric Compositions of Analytes Using Novel Fluorescent Chiral Molecular Micelles and Steady State Fluorescence Measurements

Novel fluorescent chiral molecular micelles (FCMMs) were synthesized, characterized, and employed as chiral selectors for enantiomeric recognition of non-fluorescent chiral molecules using steady state fluorescence spectroscopy. The sensitivity of the fluorescence technique allowed for investigation of low concentrations of chiral selector (3.0 × 10⁻⁵ M) and analyte (5.0 × 10⁻⁶ M) to be used in these studies. The chiral interactions of glucose, tartaric acid, and serine in the presence of FCMMs poly(sodium N-undecanoyl-l-tryptophanate) [poly-l-SUW], poly(sodium N-undecanoyl-l-tyrosinate) [poly-l-SUY], and poly(sodium N-undecanoyl-l-phenylalininate) [poly-SUF] were based on diastereomeric complex formation. Poly-l-SUW had a significant fluorescence emission spectral difference as compared to poly-l-SUY and poly-l-SUF for the enantiomeric recognition of glucose, tartaric acid, and serine. Studies with the hydrophobic molecule α-pinene suggested that poly-l-SUY and poly-l-SUF had better chiral discrimination ability for hydrophobic analytes as compared to hydrophilic analytes. Partial-least-squares regression modeling (PLS-1) was used to correlate changes in the fluorescence emission spectra of poly-l-SUW due to varying enantiomeric compositions of glucose, tartaric acid, and serine for a set of calibration samples. Validation of the calibration regression models was determined by use of a set of independently prepared samples of the same concentration of chiral selector and analyte with varying enantiomeric composition. Prediction ability was evaluated by use of the root-mean-square percent relative error (RMS%RE) and was found to range from 2.04 to 4.06%. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The Sensitive Determination of Nucleic Acids Using Fluorescence Enhancement of Eu<Superscript>3+</Superscript>-BenzoylacetoneCetyltrimethylammonium Bromide-Nucleic Acid System

A new quantitative method for micro amounts of nucleic acids in aqueous solution is proposed using Eu³⁺-benzoylacetone (BA) complex as fluorescent probe in the presence of cetyltrimethyl-ammonium bromide (CTMAB). Under the optimum condition, the ratio of the fluorescence intensities with and without nucleic acids is proportional to the concentration of nucleic acid in the range of 1.0 × 10⁻⁹ to 5.0 × 10⁻⁶ g/mL for herring sperm DNA (hsDNA), 3.0 × 10⁻⁹ to 1.0 × 10⁻⁶ g/mL for calf thymus DNA(ctDNA) and 8.0 × 10⁻⁹ to 1.0 × 10⁻⁶ g/mL for yeast RNA (yRNA), and their detection limits are 0.33, 0.21 and 0.99 ng/mL, respectively. Actual sample (DNA of Arabidopsis thaliana) was determined satisfactorily. In addition, the interaction mechanism is also investigated.     

Interaction of a New Fluorescent Probe with DNA and its Use in Determination of DNA

In this paper we reported a metal complex 1-Zn (2,5-di-[2-(3,5-bis(2-pyridylmethyl)amine-4-hydroxy-phenyl)-ethylene]-pyrazine-Zn) as a fluorescent probe sensing DNA. The result of the competitive experiment of the probe with ethidium bromide (EB) to bind DNA, absorption spectral change and polarization change in the presence and absence of DNA revealed that interaction between the probe and DNA was via intercalation. Ionic strength experiment showed the existence of electrostatic interaction as well. Scatchard plots also confirmed the combined binding modes. The fluorescence enhancement of the probe was ascribed to highly hydrophobic environment when it bound the macromolecules such as DNA, RNA or denatured DNA. The binding constant between the probe and DNA was estimated as 3.13 × 10⁷ mol⁻¹ L. The emission intensity increase was proportional to the concentration of DNA. Based on this, the probe was used to determine the concentration of calf thymus DNA (ct-DNA). The corresponding linear response ranged from 2.50 × 10⁻⁷ to 4.75 × 10⁻⁶ mol L⁻¹, and detection limit was 1.93 × 10⁻⁸ mol L⁻¹ for ct-DNA.     

Sensitive Phosphorimetric Determination of Bumetanide in Human Urine with Its Inhibition Effect on the Formation of [Fe-morin] <Superscript>3+</Superscript> Complex

A novel solid substrate-room temperature phosphorimetry (SS-RTP) was developed for determination of bumetanide (BMTN). It was validated by determining selectivity, linearity, accuracy, precision, and signal to noise ratio (S/N) for analysis. And all the experiments presented in this work were based on that BMTN inhibited the formation of [Fe-morin]³⁺ ([FeR]³⁺) complex by the reaction between Fe³⁺ and R, which led to severe quenching of room temperature phosphorescence (RTP) signal. The rate constant of the reaction (k) was 2.44 × 10⁻⁴ s⁻¹, the activation energy (E) was 21.39 kJ mol⁻¹. Detection limit of this method (LD, 5.0 ag spot⁻¹, corresponding concentration was 1.2 × 10⁻¹⁴ g mL⁻¹) was evaluated and compared with other methods, indicating better sensitivity for BMTN determination using this technique. And due to the high sensitivity of the method, it has been successfully applied to determine BMTN in human urine samples. The linear range was from 0.040 pg mL⁻¹ to 4.0 pg mL⁻¹, allowing wide determined range of BMTN. Meanwhile, the mechanism of this method was also discussed.     

A Colorimetric and Fluorescent Indicator for Hg<Superscript>2+</Superscript> Detection Based on Cinnamamide Group-Containing Rhodamine Derivative

A colorimetric and fluorescent indicator based on cinnamamide group-containing rhodamine derivative was synthesized for the detection of Hg²⁺. The rhodamine B and cinnamamide were connected via ethylenediamine as a bridging molecule through a condensation reaction to obtain a colorimetric and fluorescent indicator for the detection of Hg²⁺ in H₂O-EtOH (4:1, v/v). The indicator was excellent in the selectivity of Hg²⁺ and was almost unaffected by other common ions such as Na⁺, K⁺, Mg²⁺, Fe³⁺, Cu²⁺, Zn²⁺, Cr³⁺. The Hg²⁺-containing aqueous solution turned from colorless to red within 7 min after the addition of the indicator, and had an absorption peak at 564 nm in UV-vis, which implies a significant colorimetric phenomenon. Their characteristic peaks varied with the Hg²⁺ content, and they reached a linear relationship at low concentrations. The binding stoichiometry proved to be 1:1. The lowest detection limit was 4.1?×?10^?7 mol/L, ranging from acidic to neutral.     

Direct calculation of transition intensities in LiYF<Subscript>4</Subscript>: Nd<Superscript>3+</Superscript>

Duan’s simple model is extended to analyze the mixing of the 4f ^{N − 1}5d configuration with the 4f ^N states. The explicit static coupling and traditional dynamic coupling are considered, and the parameters are fitted according to the absorption spectrum in LiYF₄: Nd³⁺. The parameter values obtained are as follows: T ₃₂ = −28i × 10⁻⁷, T ₅₂ = −1151i × 10⁻⁷, A ₃₂² = 192i × 10⁻¹² cm, A ₅₂⁴ = i × 10⁻¹² cm, A ₇₂⁶ = 54i × 10⁻¹² cm, and A ₇₆⁶ = −680i × 10⁻¹² cm. Compared to the experimental measurements, the present model yields better results than those obtained from the Judd-Ofelt theory. The text was submitted by the authors in English.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>:CaNb<Subscript>2</Subscript>O<Subscript>6</Subscript> crystal

The absorption spectra, fluorescence spectrum and fluorescence decay curve of Nd³⁺ ions in CaNb₂O₆ crystal were measured at room temperature. The peak absorption cross section was calculated to be 6.202×10⁻²⁰ cm² with a broad FWHM of 7 nm at 808 nm for E//a light polarization. The spectroscopic parameters of Nd³⁺ ions in CaNb₂O₆ crystal have been investigated based on Judd-Ofelt theory. The parameters of the line strengths Ω _t are Ω ₂=5.321×10⁻²⁰ cm²,Ω ₄=1.734×10⁻²⁰ cm²,Ω ₆=2.889×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 167 μs, 152 μs and 91%, respectively. The fluorescence branch ratios are calculated to be β ₁=36.03%,β ₂=52.29%,β ₃=11.15%,β ₄=0.533%. The emission cross section at 1062 nm is 9.87×10⁻²⁰ cm².     

Spectrofluorimetric Determination of Dopamine Using Chlorosulfonylthenoyltrifluoroacetone–Europium Probe

A new spectrofluorimetric method was developed for the determination of trace amounts of dopamine (DA). Using chlorosulfonylthenoyltrifluoroacetone (CTTA)–europium ion (Eu³⁺) as a fluorescent probe, in a buffer solution at pH = 10.0, DA can remarkably enhance the fluorescence intensity of the CTTA-Eu³⁺ complex at λ = 612 nm; the enhanced fluorescence intensity of Eu³⁺ is proportional to the concentration of DA. Optimum conditions for the determination of DA were also investigated. The linear range and detection limit for the determination of DA were 5.0 × 10⁻⁸∼1.6 × 10⁻⁵ mol/l and 3.2 × 10⁻⁸ mol/l. This method is simple, practical and relatively free of interference from coexisting substances, and can be applied to assess DA in injection and human serum samples with good precision and accuracy.     

Electron impact dissociation of ND<Superscript>+</Superscript>: formation of D<Superscript>+</Superscript>

Absolute cross sections for electron impact dissociation of ND⁺ leading to the formation of D⁺ have been measured by applying the animated electron-ion beam method in the energy range from the reaction threshold up to 2.5 keV. The maximum inclusive cross section is observed to be (16.8 ± 0.8) × 10⁻¹⁷ cm² at the electron energy of 65.1 eV. The appearance energy for the D⁺ production is measured to be (4.0 ± 0.5) eV. Collected data are analyzed in details by means of an original procedure in order to determine separately the contributions of dissociative channels. A specific Monte Carlo modeling has been developed, which is proven to reconstruct adequately the dissociative ionization cross section. The present energy thresholds provide information about the ground and excited states of the molecular ion, as well as about the possible population of the vibrational levels. The reaction D₂(v) + N⁺ (or H₂(v) + N⁺) is a probable source for that population and it constitutes the first step of the molecular activated processes, so the corresponding chain of reactions has to be considered to study the chemistry of plasma sources.     

Synthesis of Highly Selective Indole-Based Sensors for Mercuric Ion

Two indole-based fluorescent chemosensors 1 and 2 were prepared and investigated characteristic features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion, among a series of metal ions, in aqueous ethanol (H₂O–EtOH, 1:2, v/v) with association constants of 5.74 × 10³ and 4.46 × 10³ M⁻¹ and detection limits of 7.4 and 6.8 μM, respectively. Computational results revealed that sensor 1 or 2 with Hg²⁺ ion formed 1:1 complex with a central, sandwich-coordinated Hg²⁺ ion. Computational calculations provided evidence that a sandwich-coordinated Hg²⁺ ion center was formed and the polyoxyethylene spacer acted as a scaffold for bringing functional ligands into a suitable geometry.     

Determination of Trace Mercury by Solid Substrate-Room Temperature Phosphorimetry Quenching Method Based on Catalytic Effect of Hg2+on Formation of the Ion Association Complex [Sn(XO)6]4+·[(Fin)4]

A new method for the determination of trace mercury by solid substrate-room temperature phosphorimetry (SS-RTP) quenching method has been established. In glycine-HCl buffer solution, xylenol orange (XO) can react with Sn⁴⁺ to form the complex [Sn(XO)₆]⁴⁺. [Sn(XO)₆]⁴⁺ can interact with Fin⁻ (fluorescein anion) to form the ion associate [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which can emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM). Hg²⁺ can catalyze H₂O₂ oxidizing the ion association complex [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which causes the RTP to quench. The ΔIp value is directly proportional to the concentration of Hg²⁺ in the range of 0.016–1.6 fg spot⁻¹ (corresponding concentration: 0.040–4.0 pg ml⁻¹, 0.40 μl spot⁻¹), and the regression equation of working cure is ΔIp=10.03+83.15 m Hg²⁺ (fg spot⁻¹), (r=0.9987, n=6) and the detection limit (LD) is 3.6 ag spot⁻¹(corresponding concentration: 9.0×10^–15 g ml⁻¹, the sample volume: 0.4 μl). This simple, rapid, accurate method is of high selectivity and good repeatability, and it has been successfully applied to the determination of trace mercury in real samples. The reaction mechanism for catalyzing H₂O₂ oxidizing the ion association complex ([Sn(XO)₆]⁴⁺·[(Fin)₄]⁻) SS-RTP quenching method to determine trace mercury is also discussed.     

A Coumarin-Based Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> in Aqueous Ethanol Media

A coumarin-based fluorescent chemosensor 1 for Zn²⁺ was designed and synthesized. Compound 1 exhibits lower background fluorescence due to intramolecular photoinduced electron transfer. However, upon mixing with Zn²⁺ in 30% (v/v) aqueous ethanol, a “turn-on” fluorescence emission is observed. The fluorescence emission increases linearly with Zn²⁺ concentration in the range 0.5–10 μmol L⁻¹ with a detection limit of 0.29 μmol L⁻¹. No remarkable emission enhancement was, however, observed for other metal ions. The proposed chemosensor was applied to the determination of Zn²⁺ in water samples with satisfactory results.     

Fluorescence Enhancement Effect for the Determination of Polychlorinated Biphenyls with Bovine Serum Albumin

A sensitive and selective method for the trace determination of 3, 3’, 4, 4’-tetrachlorobiphenyl (PCB77) by using bovine serum albumin (BSA) as a fluorescence probe was introduced. Under optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of polychlorinated biphenyls in the range of 8.9 × 10⁻⁸–5.0 × 10⁻⁶ mol L⁻¹ for PCB77, and 5.0 × 10⁻⁷–5.0 × 10⁻⁶ mol L⁻¹ for 2, 2’, 5, 5’-tetrachlorbiphenyl (PCB52). The detection limits (S/N = 3) of PCB77 and PCB52 were 2.6 × 10⁻⁸ mol L⁻¹ and 2.9 × 10⁻⁷ mol L⁻¹, respectively. Furthermore, the fluorescence enhancement mechanism was discussed in detail. Results indicated that fluorescence enhancement of the system originated from the formation of BSA-PCBs complexes. In addition, PCBs were mainly bound to the tyrosine residues in BSA molecules.     

Pulsed laser deposition of Zr–N codoped <Emphasis Type="Italic">p</Emphasis>-type ZnO thin films

Present p-type ZnO films tend to exhibit high resistivity and low carrier concentration, and they revert to their natural n-type state within days after deposition. One approach to grow higher quality p-type ZnO is by codoping the ZnO during growth. This article describes recent results from the growth and characterization of Zr–N codoped p-type ZnO thin films by pulsed laser deposition (PLD) on (0001) sapphire substrates. For this work, both N-doped and Zr–N codoped p-type ZnO films were grown for comparison purposes at substrate temperatures ranging between 400 to 700 °C and N₂O background pressures between 10⁻⁵ to 10⁻² Torr. The carrier type and conduction were found to be very sensitive to substrate temperature and N₂O deposition pressure. P-type conduction was observed for films grown at pressures between 10⁻³ to 10⁻² Torr. The Zr–N codoped ZnO films grown at 550 °C in 1×10⁻³ Torr of N₂O show p-type conduction behavior with a very low resistivity of 0.89 Ω-cm, a carrier concentration of 5.0×10¹⁸ cm⁻³, and a Hall mobility of 1.4 cm² V⁻¹ s⁻¹. The structure, morphology and optical properties were also evaluated for both N-doped and Zr–N codoped ZnO films.     

Thermo-optic coefficients of monoclinic KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The three thermo-optic coefficients of the biaxial laser host KLu(WO₄)₂ are measured at 633 nm by a deflection method. Their values at 300 K amount to ∂ n _g /∂ T=−7.4×10⁻⁶ K⁻¹; ∂ n _m /∂ T=−1.6×10⁻⁶ K⁻¹ and ∂ n _p /∂ T=−10.8×10⁻⁶ K⁻¹. Nearly athermal propagation directions are found for polarizations along the N _m and N _p dielectric axes.     

Spectroscopic properties of Er<Superscript>3+</Superscript> in Sc:LiNbO<Subscript>3</Subscript> crystal

The results of Er³⁺ ion spectroscopic analysis in Sc:LiNbO₃ crystals were reported. The line strengths from the ground state to the excited state were evaluated from the measured unpolarized absorption spectrum and analyzed by using standard Judd–Ofelt theory. For Sc(3 mol. %):Er (1 mol. %):LiNbO₃ crystal, the obtained intensity parameters are: Ω₂=3.72×10^-20 cm², Ω₄=1.07×10^-20 cm², and Ω₆=0.98×10^-20 cm². The fluorescence spectra and microsecond time-resolved spectra were investigated in the visible region. The excited state absorption transition strengths at 800 nm excitation were evaluated based on Judd–Ofelt theory. The results obtained here were compared to results from other research on Er:LiNbO₃ crystals. PACS 71.20.Eh; 77.84.Dy; 42.70.Hj; 42.62.Fi; 42.65.Ky