基于酒精与磁流体填充的单模-空芯-单模光纤结构温度磁场双参数传感器

提出了一种基于空芯光纤模间干涉原理的环境温度和磁场双参数传感器,为了使光入射进空芯光纤壁中,将空芯光纤与单模光纤错位熔接,传感部分用毛细玻璃管封装,空芯光纤内外分别填充酒精和磁流体.除了光纤材料的热光效应和热膨胀效应外,环境温度变化会引起两种溶液折射率的变化,而磁场变化仅引起空芯光纤外的磁流体折射率变化.理论计算可知空芯光纤壁中可支持多个模式传输并相互干涉,各模式传输相位对内外溶液折射率变化灵敏程度不同.因此,干涉谱中两个含有不同模式成分的波谷,即波谷1和波谷2,它们的漂移可以作为指示信号,通过建立敏感矩阵可同时解调出周围环境温度与磁场的变化.实验中,在28—58℃范围内,温度传感灵敏度可达-468 pm/℃;在0—169 Oe范围内磁场传感灵敏度可达82 pm/Oe.该传感器具有高灵敏度与高机械强度,并且能够实现温度与磁场的同时测量,有效消除了温度波动对磁场测量信号的干扰.     

一种新型的基于磁性液体的光纤Sagnac磁场传感器

提出一种使用磁性液体的新型光纤Sagnac磁场传感器.磁性液体具有磁致可变双折射效应和二向色性,在外加磁场作用下,液体中的磁性纳米粒子沿磁场方向结链规则排列,形成各向异性.将其制成液体薄膜,放入具有一段保偏光纤的Sagnac环中,使光纤Saganc干涉仪的正弦形状干涉光谱可随外磁场变化.光纤中传输光垂直经过磁性液体薄膜...     

基于光子晶体光纤交叉敏感分离的磁场温度传感研究

提出了一种基于定向耦合效应和表面等离子共振效应的交叉敏感分离的磁场温度传感结构.在光子晶体光纤的一个特定空气孔中填充磁流体,利用磁流体的磁光效应和定向耦合效应形成磁场传感通道;在垂直方向的另一空气孔的内壁镀金纳米薄膜并填充甲苯液体,利用甲苯的温敏效应和表面等离子共振效应形成温度传感通道.对应输出谱出现两个损耗峰,测量损耗峰位置可以间接测出磁场强度和温度变化.通过理论计算()和结构优化,在90—270 Oe1 Oe=10~3/(4π) A/m范围内,磁场强度的灵敏度最高可达1.16 nm/Oe;在25—60?C范围内,温度的灵敏度可达-9.07 nm/?C.虽然填充的两种液体的折射率都受环境温度的影响,但通过建立灵敏度系数矩阵,可以消除磁场强度与温度的交叉敏感,实现磁场温度双参量的高灵敏度检测.     

高灵敏度光纤弱磁传感器

本文报道了一种磁场检测灵敏度为10~(-5)Oe量级的光纤弱磁传感器。文中提供了传感头与检测系统的设计理论和方法。     

光源谱宽对法布里-珀罗干涉式光纤传感器工作灵敏度的影响

对干涉式光纤传感器来说,光源的谱宽直接影响着传感器的工作特性。从法布里—珀罗干涉式光纤传感器出发,推导其灵敏度的理论表达式,并用MathCAD软件进行了数学分析。讨论了光源谱宽对传感器灵敏度的影响。介绍了具有温度反馈功能的法布里—珀罗光纤干涉实验系统,给出了用该实验系统拍摄的谐振曲线照片。从该系统进行的两个重要的实验(不同干涉腔长的灵敏度对比实验和不同干涉长度的光源实验)表明,法布里—珀罗干涉式光纤传感器的灵敏度与光源谱宽的理论表达式是正确的,理沦公式与实验结论能很好地吻合。最后指出了该方法可以用于分析其他类型的干涉式光纤传感器的灵敏度问题,为光源的选择提供了参考。     

An Extrinsic Fabry–Perot Optical Fiber Sensor Based on Nano-Magnetic Fluid

Abstract

An extrinsic Fabry–Perot optical fiber sensor based on nano-magnetic fluid and a Fabry–Perot interference is presented for magnetic field measurement. The sensing fiber end is coated with a thin film of SU-8 photoresist; immersing it into a nano-magnetic fluid forms a magnetic-field-dependent extrinsic Fabry–Perot interference. The relationship between the fringe contrast and magnetic field is analyzed in different concentrations of the magnetic fluid, and the concentration of 25% is most suitable for the measurement of the magnetic field intensity. The stability of the sensor is also addressed.     

基于倏逝波的锥形光纤马赫-曾德尔湿度传感器

提出了一种基于倏逝波原理的光纤马赫-曾德尔湿度传感器,传感器是在2个单模光纤粗锥的传感臂中心通过绝热火焰熔融拉锥处理而成。光由传感器输入端传入,经过第1个粗锥时,将激发出若干高阶模,各模式光传输经过细锥区进入第2个粗锥时被耦合进入传感器输出端。当外界湿度变化时,细锥区倏逝场随之变化,最终导致透射谱能量变化。通过测量透射谱能量变化,可以实现环境湿度传感测量。实验结果表明,在35%~85%RH的湿度变化范围内,透射谱的能量具有相同变化趋势,处于水蒸气吸收峰附近的干涉谷湿度响应灵敏度可达0.157 dBm/%RH,温度交叉灵敏度仅为0.014 %RH/ ℃。该传感器因其制作简单、灵敏度高,温度交叉敏感小等特点,具有很好的应用前景。     

Design of a silicon-based plasmonic optical sensor for magnetic field monitoring in the infrared

Surface plasmon resonance (SPR) sensor chip is proposed for magnetic field monitoring in the infrared wavelength region. The structure is based on silicon substrate and gold as SPR-active metal used with an appropriate magnetic fluid film. The angular interrogation method has been used to study the sensor’s performance in terms of large shift and small width of the SPR curve for a wide range of magnetic field between 30 and 220 Oe. The effect of field incidence angle is also studied on the proposed sensor’s performance, and it is observed that the field should be incident as parallel to the magnetic fluid surface as possible. Any possibility of oxidation problem to the proposed SPR sensor is addressed by using a stable buffer layer. All the performance parameters were found to be significantly large for the above field incidence condition. The proposed sensor is able to achieve a resolution of the order as high as 0.18 Oe for magnetic field detection.     

Antiresonant guiding optofluidic biosensor

We propose a novel optofluidic biosensor in which detection is based on a shift in the transmission spectrum due to the contrast in refractive index between the carrier fluid and the target biomaterial. The sensor can function using focused illumination without the need for fiber or waveguide coupled input/output signals. We study the spectral response of the sensor using 2D full-wave time-harmonic field analysis and perform parametric analysis of detection sensitivity as a function of material and device parameters. Our analysis demonstrates that detectible shifts in the transmission spectrum can be achieved with nanoscale accumulation of biomaterial within the sensor. We show that the transmission minima and detection sensitivity can be estimated using analytical expressions based on a 1D antiresonant waveguide model.     

Optical fiber modulator derivates from hollow optical fiber with suspended core

A fiber optic integrated modulation-depth-tunable modulator based on a type of hollow optical fiber with suspended core is proposed and investigated. We synthesized magnetic fluid containing superparamagnetic Fe(3)O(4) nanoparticles and encapsulated it in the hollow optical fiber as the cladding layer of the suspended core by fusing the hollow optical fiber with the multimode optical fibers. The light with a wavelength of 632.8 nm is coupled in and out of the modulating element by a tapering technique. Experimental results show that the light attenuation in the system can be greatly influenced by only 2.0×10(-2) μL of the magnetic fluid under different magnetic field strengths. The saturated modulation depth is 43% when the magnetic field strength is 489 Oe. The response time of the system is <120 ms. Significantly, this work presents information for the development of all-fiber modulators, including other integrated electro-optic devices, such as optical switch, optical fiber filter, and magnetic sensors utilizing the special structure of this hollow optical fiber with suspended core and superparamagnetic magnetic fluid.     

侧边抛磨单模光纤表面等离子体传感器的设计和优化

光纤表面等离子体共振传感器具有体积小、抗电磁干扰,可以实现在线实时远距离检测的优点。为提高传感器的性能,建立了侧边抛磨光纤表面等离子体共振传感的物理模型,分别研究了侧边抛磨光纤的剩余厚度、银膜层的厚度对传感器的灵敏度、共振峰的深度和半高全宽等的影响。结果表明：光纤剩余厚度越小,表面等离子体共振现象越强;随银膜层的厚度增大,共振峰的宽度变宽,而传感器的灵敏度呈现非单调变化。通过综合表面等离子体共振传感器的折射率传感灵敏度和共振峰半高全宽,提出了质量因数作为传感器的优化指标,并最终得到最优化的设计方案为光纤剩余厚度为66.5 μm,银膜的厚度为50 nm,此时质量因数达到98.67。     

High-sensitivity temperature sensor based on an alcohol-filled photonic crystal fiber loop mirror

A compact temperature sensor based on a fiber loop mirror (FLM) combined with an alcohol-filled high-birefringence photonic crystal fiber (PCF) is proposed and experimentally demonstrated. The output of the FLM is an interference spectrum with many resonant dips, of which the wavelengths are quite sensitive to the change of the refractive index of the filled alcohol for the interference of the FLM. Simulation analysis predicts a high temperature sensitivity, and experimental results show it reaches up to 6.6 nm/°C for the 6.1-cm-long PCF used in the FLM.     

高灵敏度光纤应变传感器

提出一种基于锥形光纤和光纤F-P腔组合结构的光纤应变传感器。该传感器包含单模光纤拉锥形成的锥区和石英毛细管构建的F-P腔2个应变敏感区域。理论分析了光波在该传感器中的传播过程,获得了该传感器的光强传输函数。由于锥形光纤中激发出的包层高阶模参与干涉,导致传感器干涉光谱具有调制特性。实验获得了该传感器的干涉光谱,通过分析谐振波长偏移或消光比变化对应变实现独立测量,在0~500 με的测量范围内,该传感器的应变灵敏度为14.6 pm/με。利用锥形光纤引发的模式干涉和F-P腔的双光束干涉效应共同作用形成受调制的干涉谱型进行应变传感,应变灵敏度高,同时具备2种独立的应变检测手段(谐振波长和消光比检测)。     

Liquid refractive index sensor with three-cascaded microchannels in single-mode fiber fabricated by femtosecond laser-induced water breakdown

Liquid refractive index sensor with three-cascaded microchannels in single-mode fiber was fabricated by femtosecond laser-induced water breakdown. When the liquid is filled in three microchannels across the fiber core, the transmission spectrum of the sensor shows interference peaks. The refractive index of liquid can be sensed accurately based on both the wavelength shift and loss change of interference peaks. The refractive index sensitivities of wavelength shift and loss change reach to as high as ?2,406.1 nm/RIU and ?156.8 dB/RIU, respectively. The sensor is insensitive to the refractive index change of liquid caused by environmental temperature. It can be used for liquid refractive index sensing with high sensitivity, especially for water pollution monitoring.     

A high-finesse fiber optic Fabry–Perot interferometer based magnetic-field sensor

A high-finesse extrinsic Fabry–Perot interferometric sensor for the measurement of weak dc magnetic fields is demonstrated. The Fabry–Perot cavity is formed by aligning the fiber end-face and the TbDyFe rod end-face, and each end-face is coated by a mirror with a micro-lens. The length of the TbDyFe rod is changed by the variation of an applied dc magnetic field, leading a change of the Fabry–Perot cavity length. By interrogating the white-light interferometric spectrum, the wavelength of the resonant peak is tracked and the length of the Fabry–Perot cavity is obtained. The sensor exhibits a high sensitivity of 1510 nm/mT with a magnetic resolution of 25 nT.     

一种基于模间干涉的亚波长直径光纤气体折射率传感

设计了一种基于模间干涉的亚波长直径光纤气体折射率传感方案,并分析了其测量灵敏度.将标准单模光纤和一段仅传输基模与二阶模的无包层亚波长直径光纤结合形成传感头,通过分析传感头外气体折射率的变化对两个模式干涉谱峰值移动的影响,研究了这种传感器的折射率测量灵敏度.结果表明,这种传感器的灵敏度高于利用折射率引导型光子晶体光纤的基于模间干涉的折射率传感器.因为没有气体向微孔扩散的过程,这种基于模间干涉的亚波长光纤折射率传感器可用于实时探测.     

Giant magnetoimpedance effect and voltage response in meander shape Co-based ribbon

Field-annealed Co-based amorphous ribbon (Metglas^® 2705M) with a meander structure is fabricated by MEMS technology and the giant magnetoimpedance (GMI) effects are studied at different magnetic fields and frequencies. The maximum longitudinal GMI ratio of the ribbon is 193.7% and the magnetic field sensitivity is 17.4%/Oe. The maximum GMI ratio of the meander ribbon is much larger than the single strip ribbon mainly due to the larger change ratio of inductance L. The sensitivity of an output U reach up to 10 V/A and U thermal fluctuation is less than 15 mV in the temperature range of ?20 to 40°C. This meander shape ribbon can be considered as a good candidate for the GMI-based sensor fabrication.     

Magnetoelectric gradiometer

Gradiometer resembles in functionality a sensor measuring the magnetic field gradient whose sensitivity is determined the ability to quantify change with respect to base value. Magnetoelectric (ME) gradiometer designed in this study utilizes ME composites with ring-dot piezoelectric transformer structure working near electromechanical resonance, where ring acts as the input while dot acts as the output. Magnetostrictive disc was bonded on top of the output section resembling a bilayer composite structure. The resonance frequency of sample was found to be in the range of 91–94 kHz. The generated magnetic field due to converse ME effect interacts with the externally applied magnetic field producing flux gradient which is detected through the frequency shift and output voltage change of gradiometer. The measurements clearly illustrate that the proposed design has high sensitivity and it can be used for detecting magnetic field gradient.     

基于无芯光纤的多参数测量传感器

设计并制作了一种基于单模-无芯-单模-无芯-单模光纤结构的马赫-曾德尔传感器,可用来同时测量折射率和温度.该传感器中,两处无芯光纤充当输入、输出耦合器,中间单模光纤作为传感臂.利用有限元仿真和理论分析,确定耦合器和传感臂的最优长度为15 mm.在无芯光纤中激发出的高阶模进入单模光纤的包层传输,由于倏逝场的作用,受到环境折射率和温度的影响.选取透射谱不同干涉级次的波谷作为研究对象,实现了折射率和温度的同步测量.实验结果表明:1545 nm附近干涉谷的折射率和温度灵敏度分别为–153.89 nm/RIU(refractive index unit)和0.166 nm/℃;1570 nm附近干涉谷的折射率和温度灵敏度分别为–202.74 nm/RIU和0.183 nm/℃.该传感器在实现折射率和温度同步测量的同时,仍能保持较高灵敏度,在生物医疗等方面有着较好的应用前景.     

基于低双折射光子晶体光纤Sagnac干涉仪的超低温度系数扭曲传感器

研究了低双折射光子晶体光纤中由光纤扭曲造成的圆双折射效应,并应用Sagnac干涉仪结构设计了扭曲传感器.在Sagnac环中的光子晶体光纤上施加机械压力引入初始线双折射并产生正弦干涉光谱,再扭曲光纤产生圆双折射使干涉光谱随扭曲角度移动.光谱峰值波长随扭曲角度变化符合Sinc函数关系,理论分析与实验相符.传感器灵敏度为1.00 nm/°,分比率为0.01°,并具有超低的温度系数-0.5 pm/℃.