Synthesis of hydrophilic microspheres with LCST close to body temperature for controlled dual‐sensitive drug release

Novel stimuli‐responsive hydrophilic microspheres were prepared by free radical polymerization of hydroxyethyl methacrylate (HEMA) and methacrylic acid (MA), as hydrophilic monomers, and N‐isopropylacrylamide (NIPAAm) and N,N′‐ethylenebisacrylamide (EBA), as thermo‐sensitive monomer and crosslinker, respectively. Hydrophilic comonomers were introduced in the macromolecular network to synthesize materials with tunable thermal behavior. In addition, by introducing in the polymerization feed both a hydrophilic and a pH‐sensitive monomer, such as MA, dual stimuli‐responsive (pH and temperature) hydrogels were synthesized. The incorporation of monomers in the network was confirmed by infrared spectroscopy, while the network density and the shape of hydrogels was found to strictly depend on the concentration of monomers in the polymerization feed. Thermal analyses showed negative thermo‐responsive behavior with pronounced water affinity of microspheres at a temperature lower than lower critical solution temperature (LCST). In our experiment, the LCST values of the hydrogels were in the range 34.6–37.5°C, close to the body temperature, and the amount of hydrophilic moieties in the polymeric network allows to collect shrinking/swelling transition temperatures higher than the LCST of NIPAAm homopolymers. In order to test the preformed materials as drug carriers, diclofenac diethylammonium salt (DDA) was chosen and drug entrapment percent was determined. Drug release profiles, in media at different temperature and pH, depend on hydrogels crosslinking degree and drug–bead interactions. By using semi‐empirical equations, the release mechanism was extensively studied and the diffusional contribute was evaluated. Copyright © 2010 John Wiley & Sons, Ltd.     

Fast responsive poly(<Emphasis Type="Italic">N,N</Emphasis>-diethylacrylamide) hydrogels with interconnected microspheres and bi-continuous structures

We prepared thermo-responsive polymer hydrogels by γ-ray irradiation of aqueous solutions of N, N-diethylacrylamide at different temperatures below and above its lower critical solution temperature (LCST). Poly(N, N-diethylacrylamide) gel had a transparent and homogeneous structure when the radiation-induced polymerization and crosslinking were carried out below the LCST (25 °C) of the polymer. On the other hand, cloudy and heterogeneous gels were formed at temperatures above the LCST of the polymer (>35 °C). From environmental scanning electron microscopy observations, the gels prepared at 35 and 40 °C were seen to show sponge-like bi-continuous porous structures, while those prepared at 50 °C showed a porous structure consisting of interconnected microspheres. For temperature changes between 10 and 40 °C, gels with porous structures showed rapid volume transitions on a time scale of about a minute, not only for shrinking but also for swelling processes, which is in remarkable contrast to the porous poly(N-isopropylacrylamide) hydrogels.     

The Syntheses and Characterization of Molecularly Imprinted Polymers for the Controlled Release of Bromhexine

Imprinted polymers are now being increasingly considered for active biomedical uses such as drug delivery. In this work, the use of molecularly imprinted polymers (MIPs) in designing new drug delivery devices was studied. Imprinted polymers were prepared from methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linker), and bromhexine (as a drug template) using bulk polymerization method. The influence of the template/functional monomer proportion and pH on the achievement of MIPs with pore cavities with a high enough affinity for the drug was investigated. The polymeric devices were further characterized by FT-IR, thermogravimetric analysis, scanning electron microscopy, and binding experiments. The imprinted polymers showed a higher affinity for bromhexine and a slower release rate than the non-imprinted polymers. The controlled release of bromhexine from the prepared imprinted polymers was investigated through in vitro dissolution tests by measuring absorbance at λ _max of 310 nm by HPLC-UV. The dissolution media employed were hydrochloric acid at the pH level of 3.0 and phosphate buffers, at pH levels of 6.0 and 8.0, maintained at 37.0 and 25.0 ± 0.5 °C. Results from the analyses showed the ability of MIP polymers to control the release of bromhexine In all cases The imprinted polymers showed a higher affinity for bromhexine and a slower release rate than the non-imprinted polymers. At the pH level of 3.0 and at the temperature of 25 °C, slower release of bromhexine imprinted polymer occurred.     

“Smart” carboxymethylchitosan hydrogels crosslinked with poly(N-isopropylacrylamide) and poly(acrylic acid) for controlled drug release

Carboxymethylchitosan (CMC) hydrogels containing thermo-responsive poly(N-isopropylacrylamide) (poly(NIPAAm)) and pH-responsive poly(acrylic acid) (poly(AA)) were prepared via a free radical polymerization in the presence of hexamethylene-1,6-di-(aminocarboxysulfonate) crosslinking agents. A proper ratio of CMC to NIPAAm and AA used in the reaction was investigated such that the thermo- and pH-responsive properties of the hydrogels were obtained. Water swelling of the hydrogels was improved when the solution pH was in basic conditions (pH 10) or the temperature was below its lower critical solution temperature (LCST). Effects of the change in solution temperature and pH on water swelling properties of the hydrogel as well as the releasing rate of an entrapped drug were also investigated. The hydrogels were not toxic and showed antibacterial activity against Straphylococcus aureus (S. aureus). The pH- and thermo-responsive properties of this novel “smart” hydrogel might be efficiently used as dual triggering mechanisms in controlled drug release applications.     

Modulation of the lower critical solution temperature of 2-Alkyl-2-oxazoline copolymers

Living cationic copolymerization of 2-isopropyl-2-oxazoline with 2-n-propyl-, 2-n-butyl-, and 2-n-nonyl-2-oxazoline results in gradient copolymers of defined composition, narrow molar mass distributions (PDI = 1.09–1.3), and defined overall degree of polymerization, set to n = 25 for all polymers. The introduction of monomer units of stronger amphiphilic character results in a systematic decrease of the lower critical solution temperature (LCST). The LCST modulation can be controlled by the choice of the comonomer as well as the comonomer ratio and was tuned in the temperature range from 46 to 9 °C. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Frontal polymerization synthesis and drug delivery behavior of thermo-responsive poly(N-isopropylacrylamide) hydrogel

Thermo-responsive hydrogels of poly(N-isopropylacrylamide) (PNIPAm) were prepared by fontal polymerization and investigated as a temperature-triggered delivery device for the model drug aspirin. The influence of relative amount of reactant components on the feature of the polymerization front was studied. Furthermore, aspirin was loaded into hydrogels prepared by fontal polymerization method and classical polymerization, respectively, and its release characteristics were determined under different temperature conditions (25 °C and 37 °C). The drug storages and kinetic parameters for two hydrogels indicated that drug-loading capacity and drug release of frontal polymerization (FP) hydrogel were improved as compared with the classical polymerization (CP) one. Scanning electronic microscope and differential scanning calorimetry (DSC) results could account for these improvements in drug delivery for FP hydrogel. The above results indicate that FP can be an alternative method for the preparation of PNIPAm hydrogels used as drug delivery devices with less time consuming and easier protocols.     

Swelling and drug releasing properties of poly(N-isopropylacrylamide) thermo-sensitive copolymer gels

A series of N-isopropylacrylamide (NIPAAm) copolymer gels with different hydrophilicities were prepared from NIPAAm, hydrophilic acrylamide (AAm) and hydrophobic butyl methacrylate (BMA). The swelling and thermo-responsive properties of PNIPAAm P (NIPAm-co-BMA) and P(NIPAm-co-AAm) copolymer hydrogels were investigated. The drug loading and releasing behaviors for two kinds of model drug with different hydrophilicities were studied. The result shows that the copolymer gels present negative thermo-sensitivities. The lower critical solution temperature (LCST), equilibrium swelling degree and the initial swelling rate increase as the hydrophilicity of gels increases when the temperature is below the LCST. With increasing gel hydrophilicity the loading ratio for sodium salicylate increases, while for salicylic acid, the reverse is observed. The initial drug releasing rate of sodium salicylate and salicylic acid also increase with increasing gel hydrophilicity. The initial drug releasing rate of sodium salicylate is significantly higher than that of salicylic acid. For salicylic acid which is less hydrophilic, the equilibrium releasing ratio at high temperature is lower than that at low temperature while for sodium salicylate which is more hydrophilic, the equilibrium releasing ratio at high temperature is almost the same as that at low temperature. Equilibrium releasing ratios of the three gels are significantly different from each other for salicylic acid when the temperature is below LCST while the equilibrium releasing ratios of the three gels are all 100% for sodium salicylate. __________ Translated from Journal of Central South University (Science and Technology), 2007, 38(5): 906–911 [译自: 中南大学学报(自然科学版)]     

沉淀聚合法制备右旋邻氯扁桃酸分子印迹聚合物微球

以右旋邻氯扁桃酸为模板,丙烯酰胺、乙二醇二甲基丙烯酸酯分别为功能单体和交联剂,采用沉淀聚合法制备了分子印迹聚合物微球,讨论了反应介质用量、聚合温度、引发剂的种类和用量对印迹微球的影响。实验表明：分子印迹微球与传统本体聚合法制备的聚合物相比具有更高的特异识别能力,通过Scatchard分析研究了聚合物的选择结合性能,结果表明分子印迹聚合物微球在识别右旋邻氯扁桃酸分子的过程中存枉两类结合位点,而空白聚合物微球只存在一类结合位点。     

Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers

2,4,6-Trichlorophenol (2,4,6-TCP)-imprinted micro- and submicrospheres prepared by precipitation polymerization were compared with templated materials obtained by conventional bulk polymerization. The influence of the type and amount of functional monomer, the type and amount of cross-linker, polymerization temperature, porogen, and the ratio of template molecule and functional monomer to cross-linker on the size of the obtained particles were investigated. UV-Vis spectrophotometer experiments revealed that the microsphere polymers provided higher affinity to the template in contrast to imprinted polymers prepared by bulk polymerization. The binding properties of the microspheres, including binding isotherms and affinity distribution, were studied via Freundlich isotherm affinity distribution (FIAD) analysis. The obtained results indicated that microspheres prepared by precipitation polymerization provided superior rebinding properties during equilibrium binding in contrast to bulk polymers and submicrosphere polymers. Moreover, release experiments showed that 80% of rebound 2,4,6-TCP was released from the imprinted microspheres within the first 2 h, while more intimately bound 2,4,6-TCP molecules were released in the following 40 h. The morphologies and porosities of the resulting imprinted materials were characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis, respectively. The microsphere polymers exhibited a regular spherical shape with a high degree of monodispersity to the corresponding bulk polymers. Furthermore, the micro- and submicrospheres were characterized by narrow distribution of pores in contrast to a heterogeneity index of m = 0.6647 for the microsphere imprinted polymer.     

Preparation of thermosensitive polymeric organogels and their drug release behaviors

Stimuli-sensitive drug delivery systems—in particular, stimuli-sensitive polymeric hydrogels swollen with water—have attracted considerable attention in medical and pharmaceutical fields. This study concerns with the synthesis of thermosensitive polymeric organogels for controlled drug release; a copolymerization of stearyl acrylate (SA) with a cross-linker and the loading of indomethacin as a model lipophilic drug were accomplished in oleyl alcohol. The pulsatile (on-off) drug release was successfully conducted: release was halted at 36 °C and release occurred at over ca. 40 °C. This drug release pattern is suitable for thermochemotherapy combined with hyperthermia. The differential scanning calorimetric measurement suggests the following mechanism: the ordered crystalline structure, i.e., the alignment of hydrophobic alkyl side chains, works to prevent indomethacin diffusion from the organogel below the crystallization temperature, while the disordered amorphous structure above the melting temperature allows indomethacin to diffuse.     

Synthesis and characterization of temperature-sensitive and biodegradable hydrogel based on N-isopropylacrylamide

Based on a biodegradable cross-linker, N-maleyl chitosan (N-MACH), a series of Poly(N-isopropylacrylamide) (PNIPAAm) and Poly(N-isopropylacrylamide-co-acrylamide) [P(NIPAAm-co-Am)] hydrogels were prepared, and their lower critical solution temperature (LCST), swelling kinetics, equilibrium swelling ratio in NaCl solution, and enzymatic degradation behavior in simulated gastric fluids (SGF) were discussed. The LCST did not change with different cross-linker contents. By altering the NIPAAm/Am molar ratio of P(NIPAAm-co-Am) hydrogels, the LCST could be increased to 39°C. The LCST of the hydrogel was significantly influenced by the monomer ratio of the NIPAAm/Am but not by the cross-linker content. In the swelling kinetics, all the dry hydrogels exhibited fast swelling behavior, and the swelling ratios were influenced by the cross-linker content and NIPAAm/Am molar ratios. Equilibrium swelling ratio of all the hydrogels decreased with increasing NaCl solution concentration. In enzymatic degradation tests, the weight loss of hydrogels was dependent on the cross-linker contents and the enzyme concentration.      

Microporous hydrogels of cellulose ether cross-linked with di- or polyfunctional glycidyl ether made for the delivery of bioactive substances

Hydrogels were prepared by the cross-linking reactions of carboxymethyl cellulose with di- or polyfunctional glycidyl ether to investigate the effects of different cross-linker’s chain length and the number of epoxy groups on the properties of the gels. Fourier transform infrared spectra showed a new peak at ν = 1,740 cm⁻¹ assigned to the absorption of carbonyl groups in the new ester structure formed by the cross-linking of –COONa with the epoxy compounds. The interior morphology data indicated microporous network structures which correlated with the swelling of hydrogels. The swelling data in water, urea, sucrose, urine and aspartame showed increases in swelling with an increase in chain length of the cross-linker but decreased with the number of epoxy groups on the cross-linker. Collectively, the gels were ionic strength sensitive. The rheology experiments showed that gel point (t _gel) increased with the chain length of the cross-linker but reduced with increase in number of epoxy groups on the cross-linker. Dynamic oscillatory measurements indicated stronger material functions in gels prepared with polyfunctional epoxy cross-linkers. The hydrogels prepared with difunctional epoxy groups had higher loading capacity and faster release of bovine serum albumin compared with hydrogels based on polyfunctional epoxy group cross-linkers.     

Protein encapsulation and release from degradable sugar based hydrogels

Acid labile sugar based hydrogels have been synthesized using a commercially available acid sensitive cross-linker, 3,9-divinyl-2,4,8,10-tetraoxaspiro-[5,5]-undecane. The monomers used for polymerization are N-isopropylacrylamide (NIPAM) and d-gluconamidoethyl methacrylate (GAMA), which when polymerized in the presence of the acid labile cross-linker yield hydrogels that can swell and degrade under acidic conditions, making them ideal for drug delivery. The hydrogels are synthesized using either a photo-initiator, Irgacure-2959 or a conventional initiator, potassium persulfate. The hydrogels obtained by photo-polymerization exhibit defined and unique microstructures, when analyzed by scanning electron microscopy (SEM). The swelling capacity and protein release from the hydrogels as a function of pH is studied. The protein release from the hydrogels is found to be dependent upon the degree of cross-linking and the pH of the environment.     

Biodegradable Microspheres with Poly(N-isopropylacrylamide) Enriched Surface: Thermo-responsibility,Biodegradation and Drug Release

Microspheres with thermo-responsible surface were fabricated by PCL-b-PEO-b-PNIPAM triblock copolymers. Thermo-responsible morphological changes of PCL-b-PEO-b-PNIPAM microspheres immersed in aqueous solution at temperatures above the LCST(e.g. 37 ?C) were observed from porous surface structure to compact surface layer. Enzymatic degradation and in vitro drug release results showed that the thermo-responsible surface layer greatly influenced the degradation of microspheres as well as the drug release behavior from microspheres. With the copolymerization of PNIPAM block into PCL-b-PEO copolymers, the drug release could be well regulated by changing temperatures and microspheres composition, which revealed the great potentials of microspheres with thermo-responsible surface for controlled drug release.     

Negative Temperature Sensitive Hydrogels in Controlled Drug Delivery

Summary: PVP/PNIPAAm copolymers exhibit a temperature sensitive nature that makes them an attractive candidate for controlled drug delivery devices. Diclofenac sodium was added to the monomeric mixture, which included an initiator and crosslinking agent (where appropriate), prior to UV photopolymerisation. It was found that the xerogels retained similar properties as the original samples (not containing drug) at lower levels of drug integration. In all cases, drug dissolution analysis showed that the active agent was released at a slower rate at temperatures above the Lower Critical Solution Temperature (LCST). Interestingly, the drug release trends were almost identical for both the physically and chemically crosslinked hydrogels, when the decrease in transition temperature caused by the incorporated crosslinking agent is taken into consideration. It is believed that both types of copolymers reached a constant maximum swollen weight at a set of temperatures above their transition temperatures. When this swollen plateau is attained, the hydrophilic-hydrophobic interactions are balanced, thus the gel does not swell or shrink further and the drug diffuses out at a constant rate.     

Controlling drug release from imprinted hydrogels by modifying the characteristics of the imprinted cavities

The aim of this study was to analyse the influence of the template/functional monomer proportion on the achievement of molecularly imprinted hydrogels with cavities with a high enough affinity for the drug to sustain drug release. Imprinted hydrogels were prepared from N,N-dimethylacrylamide and tris(trimethylsiloxy)sililpropyl methacrylate (DMAA and TRIS; main components), methacrylic acid (MAA; functional monomer), ethylene glycol dimethacrylate (EGDMA; cross-linker), and timolol (template drug). Photo-polymerization of the monomer solutions was carried out in poly(propylene) molds (0.3 mm thickness) to obtain contact lens-like devices. Non-imprinted control hydrogels were also prepared in the same way but without the addition of timolol. The imprinted hydrogels showed a higher affinity for timolol and a slower release rate than the non-imprinted hydrogels. The release rate decreased by increasing the MAA/timolol ratio in the gel recipe. Hydrogels prepared with 400 x 10(-3) M MAA, 600 x 10(-3) M EGDMA, and a timolol/MAA mole ratio of 1:16-1:32 had drug diffusion coefficients two orders of magnitude below those of non-imprinted hydrogels. The results obtained clearly indicate that the timolol release rate is critically affected by the conditions under which the hydrogels were synthesized. These effects are discussed on the basis of the influence of drug proportion on the conformation of the imprinted cavities.     

Preparation of high oxygen permeable transparent hybrid copolymers with silicone macro-monomers

In this study, high oxygen permeable transparent hybrid copolymers were prepared with hydrophilic monomer such as 2-hydroxyethylmethacrylate (HEMA) or N,N-dimethylacrylamide (DMAA) and mono- or difunctional silicone macro-monomer introduced methacryl groups. In HEMA-based hybrid copolymers, difunctional silicone macro-monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker were required in order to prepare transparent hybrid materials, while high transparent DMAA-based hybrid copolymers could be prepared without EGDMA cross-linker. The polymerization kinetics investigation revealed that this difference between HEMA and DMAA in preparation condition to transparent hybrid material originated to monomer reactivity in copolymerization and DMAA showed high reactivity compared with HEMA. Moreover, DMAA-based hybrid copolymers indicated high water content and high oxygen permeability as against HEMA-based hybrid copolymers because of its low cross-linking density.     

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.     

Development of temperature-responsive semi-IPN hydrogels from PVA-PNVC-PAm for controlled release of anti-cancer agent

A series of semi-interpenetrating polymeric network (semi-IPN) hydrogels were synthesized using poly(vinyl alcohol) (PVA), monomers N-vinylcaprolactam (NVC) acrylamide (Am), and cross-linker bis[2-methacryloyloxy] ethyl phosphate (BMEP). The hydrogels were synthesized by using free-radical polymerization using ammonium persulphate (APS) as an initiator at 60°C. The hydrogels were characterized by various techniques such as Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) to confirm the formation, crystallinity, and morphological behavior. The swelling behavior at various temperatures and pH conditions showed that the semi-IPN hydrogels were good candidates for temperature-responsive nature. 5-Flurouracil (FU), a model anticancer drug, was successfully encapsulated and the encapsulation efficiency was found in range of 50–74% for different hydrogels. Further, in-vitro release studies were performed to investigate the release mechanism. The cumulative release studies showed that the developed hydrogels are potentially efficient for the gastrointestinal drug delivery of FU.     

Poly(N-isopropylacrylamide) thermoresponsive cross-linked conjugates containing polymeric soybean oil and/or polypropylene glycol

Synthesis, characterization and solution properties of a new series of the PNIPAM-soybean oil and/or polypropylene glycol, PPG, conjugates (conjugates also referred to as co-networks) have been described. For this purpose free radical polymerization of NIPAM monomer was initiated by macroinitiators based on PSB and/or PPG in order to obtain PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM cross-linked graft copolymers. The autooxidation of soybean oil under air at room temperature rendered waxy soluble polymeric soybean oil peroxide associated with cross-linked parts. The soluble polymeric oil macro-peroxide isolated from the cross-linked part was used to initiate the free radical polymerization of NIPAM to give PSB-g-PNIPAM cross-linked copolymer. To obtain PPG-macromonomeric initiator, PPG-MIM, PPG-bis amino propyl ether with Mn 400 (or 2000) Dalton was reacted with 4,4′-azo bis cyanopentanoyl chloride and methacryloyl chloride, respectively. PPG-MIM also initiated the free radical polymerization of NIPAM at 80 °C to yield PPG-g-PNIPAM cross-linked thermoresponsive product. In order to obtain PSB-g-PPG-g-PNIPAM cross-linked triblock copolymer, NIPAM was polymerized by using the mixture of two macroinitiators, PSB and PPG-MIM. PSB contents in the graft copolymers were calculated via elemental analysis of nitrogen in graft copolymers. Thermal analysis, SEM, FTIR and ¹H NMR techniques were used in the characterization of the products. The effect of polymeric soybean oil, PSB, and/or PPG on the thermal response rate of poly(N-isopropylacrylamide, PNIPAM, cross-linked-graft copolymers swollen in water has been investigated by means of swelling-deswelling and drug release behaviors against to temperature change. Lower critical solution temperatures (LCST) of the cross-linked PNIPAM conjugates (conjugates also referred to as co-networks) were determined from the curves of swelling degrees versus solution temperatures. The response temperature of the hydrophobically modified PNIPAM conjugates was reduced to 27 °C, 23 °C and 27 °C for PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM, respectively. We have found that the graft copolymers were not pH-responsive. In addition, higher pH ranges cause the hydrolysis of the PSB ester linkages, quickly and makes the cross-linked graft copolymers soluble.The fastest shrinking of the gels was observed by loosing water between 65% and 98% at 50 °C.Methyl orange (MO), was used as a model drug, loaded into cross-linked graft copolymers to examine and compare the effects of controlled release at lower and higher temperatures of lower critical solution temperature (LCST).