Study on thermal decomposition of polymers by evolved gas analysis using photoionization mass spectrometry (EGA-PIMS)

Photoionization mass spectrometry (PIMS) with vacuum ultraviolet (VUV) light source provides an efficient and fragmentation-free method for the soft ionization of gaseous compounds, in order to facilitate an understanding of thermal decomposition behavior and chemical composition of polymeric materials. The PIMS was applied to the evolved gas analysis (EGA) system equipped with a skimmer interface which is constituted based upon a jet separator principle between a vacuum MS chamber and an atmospheric sample chamber in a furnace. A photoionization source with a deuterium (D₂) lamp was closely installed to the vacuum ionization chamber of a mass spectrometer to improve the ionization efficiency. The thermal decomposition of typical polymers in inert gas atmosphere was investigated by the EGA-PIMS and the resulting PI mass spectrum was characterized satisfactorily by only the parent ions with no contribution as a result of fragmentation during the ionization. The results suggested that the EGA-PIMS was an especially powerful and desirable in situ thermal analysis method for polymeric materials which evolve organic gases simultaneously and concurrently. The combination of EGA equipped with skimmer interface with no change of evolved gaseous species and PIMS with fragmentation-free during the ionization is described briefly, and the effective results are presented by comparing with EGA using conventional electron impact ionization mass spectrometry.     

Tunable single-photon ionization TOF mass spectrometry using laser-produced plasma as the table-top VUV light source

Here we report on a laser plasma-based tunable VUV photoionization time-of-flight (TOF) mass spectrometer conceived mainly to study complex gaseous mixtures. Ionizing photons at tunable vacuum UV (VUV) wavelengths are generated by a gas-target laser-produced plasma, spectrally dispersed in the range 100–160 nm and efficiently focused onto a sample molecular beam. As a test case, we studied the exhaust gas of a four-stroke moped, a typical example of a complex gaseous mixture. Due to the VUV “soft” ionization, the mass spectra are less congested and more easily interpretable. Substituted benzene derivatives are found to give the most intense signals. Several aliphatic hydrocarbons are also detected. The use of tunable VUV radiation allowed the investigation of the contribution of isomers in the mass spectrum from the onset and shape of the photoionization efficiency spectra. Semiquantitative analysis was performed using known literature data detailing the photoionization cross sections. Our findings suggest that using combined data on the mass/photoionization efficiency spectra may be very helpful for a comprehensive analysis of complex gaseous mixtures.     

Thermal decomposition of polypropylene by tunable synchrotron vacuum ultraviolet photoionization mass spectrometry

The application of synchrotron vacuum ultraviolet (VUV) photoionization combined with molecular-beam mass spectrometry, also called synchrotron VUV photoionization mass spectrometry (SVUV-PIMS), in the research of the thermal decomposition of polypropylene (PP) was studied, and some main pyrolysis products formed at different photon energies have been identified. Using SVUV-PIMS, some isomers can be distinguished, which are much helpful for further understanding of the thermal decomposition of PP.     

Infrared laser desorption/vacuum ultraviolet photoionization mass spectrometry of petroleum saturates: a new experimental approach for the analysis of heavy oils

A novel method combining infrared (IR) laser desorption with tunable synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry (LD/VUV PIMS) is applied to characterize a number of petroleum saturates samples from Lungu atmospheric residue (LGAR) under different treatment procedures. The mass spectra of these saturates are well resolved with even masses as the dominant ions and are clearly sample‐dependent. In order to assess the ability of IR LD/VUV PIMS to determine the average molecular weight of heavy oils, the dependence of the measured molecular weight distributions on the VUV ionization photon energies is also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

GC–MS with photoionization of cold molecules in supersonic molecular beams—Approaching the softest ionization method

A new type of photoionization ion source was developed for the ionization of cold molecules in supersonic molecular beams (named Cold PI). The system was based on a GC–MS with supersonic molecular beams and its fly‐through EI of cold molecules ion source (Cold EI) plus quadrupole mass analyzer. A continuously operated deuterium VUV photoionization lamp was added and placed above and between the supersonic nozzle and skimmer whereas the Cold EI ion source served only as a portion of the ion transfer ion optics. The supersonic nozzle and skimmer were voltage biased and the VUV light crossed the supersonic expansion about 10 mm from the nozzle. We obtained over three orders of magnitude enhancement in the relative abundance of the molecular ion of squalane in Cold PI versus in photoionization of this compound as a thermal compound. Accordingly, we also proved that standard photoionization is not as soft ionization method as previously perceived for large compounds. We found that Cold PI is as soft as and possibly softer than field ionization; thus, it could be the softest known ionization method. The ionization yield was about 200–300 times weaker than with Cold EI yet our limit of detection was about 200 femtogram in SIM mode for cholesterol and pyrene which is reasonable. Practically, all hydrocarbons gave only molecular ions with rather uniform response whereas alcohols gave some molecular ions plus major fragment ions particularly with a loss of water (similarly to field ionization). We tested Cold PI in the GC–MS analysis of diesel fuels and analyzed the time averaged data for group type information. We also found that we can analyze the diesel fuels by fast under 20‐s flow injection analysis in which the generated averaged mass spectrum of molecular ions only could serve for the characterization of fuels.     

On-line capillary electrophoresis-mass spectrometry using dopant-assisted atmospheric pressure photoionization: setup and system performance

The on-line coupling of capillary electrophoresis (CE) and mass spectrometry (MS) via atmospheric pressure photoionization (APPI) is demonstrated. To achieve CE-APPI-MS, an adapted coaxial sheath-flow interface was combined with an ion-trap mass spectrometer equipped with an APPI source originally designed for liquid chromatography-MS. Effective photoionization of test compounds was accomplished after optimization of several interface and MS parameters, and of the composition and flow rate of the sheath liquid. Further enhancement of the ionization efficiency could be achieved by adding a dopant, such as acetone or toluene, to the sheath liquid to aid indirect ionization. Acetone significantly increased the ionization of the polar test compounds by proton transfer, while toluene was more useful for the enhanced formation of molecular ions from nonpolar compounds. The effect of several common CE background electrolytes (BGEs) on the APPI-MS response of the analytes was also studied. It appeared that in contrast with electrospray ionization, nonvolatile BGEs do not cause suppression of analyte signals using APPI. Therefore, in CE-APPI-MS, a variety of buffers can be chosen, which obviously is a great advantage during method development. Remarkably, also sodium dodecyl sulfate (SDS) did not affect the photoionization of the test compounds, indicating a strong potential of APPI for the on-line coupling of micellar electrokinetic chromatography (MEKC) and MS.     

Analysis of the Products from the Oxidation of Geting Bituminous Coal by Atmospheric Pressure Photoionization–Mass Spectrometry

Geting bituminous coal was directly oxidized in aqueous sodium hypochlorite. The reaction mixture was sequentially extracted with ethyl ether and ethyl acetate. Both extracts were esterified with diazomethane to obtain methyl esterified products, which were analyzed using high performance liquid chromatography–mass spectrometry with electrospray ionization or atmospheric pressure photoionization. A large number of low- and nonpolar products with relatively high molecular masses were determined using atmospheric pressure photoionization mass spectrometry. Toluene and a toluene/anisole mixture (vol/vol = 95:5) were added to the atmospheric pressure photoionization system as dopants. Toluene induced better ionization than the toluene/anisole mixture in both ion signal intensity and number of detected species. Most of the molecular associated compounds contained heteroatoms.     

Photoionization studies on various quinones by an infrared laser desorption/tunable VUV photoionization TOF mass spectrometry

Photoionization and dissociative photoionization characters of six quinones, including 1,2-naphthoquinone (1,2-NQ), 1,4-naphthoquinone (1,4-NQ), 9,10-phenanthroquinone (PQ), 9,10-anthraquinone (AQ), benz[a]- anthracene-7,12-dione (BAD) and 1,2-acenaphthylenedione (AND) have been studied with an infrared laser desorption/tunable synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry (IR LD/VUV PIMS) technique. Mass spectra of these compounds are obtained at different VUV photon energies. Consecutive losses of two carbon monoxide (CO) groups are found to be the main fragmentation pathways for all the quinones. Detailed dissociation processes are discussed with the help of ab initio B3LYP calculations. Ionization energies (IEs) of these quinones and appearance energies (AEs) of major fragments are obtained by measuring the photoionization efficiency (PIE) spectra. The experimental results are in good agreement with the theoretical data.     

Comparison of the sensitivity of mass spectrometry atmospheric pressure ionization techniques in the analysis of porphyrinoids

The porphyrinoids chemistry is greatly dependent on the data obtained in mass spectrometry. For this reason, it is essential to determine the range of applicability of mass spectrometry ionization methods. In this study, the sensitivity of three different atmospheric pressure ionization techniques, electrospray ionization, atmospheric pressure chemical ionization and atmospheric pressure photoionization, was tested for several porphyrinods and their metallocomplexes. Electrospray ionization method was shown to be the best ionization technique because of its high sensitivity for derivatives of cyanocobalamin, free‐base corroles and porphyrins. In the case of metallocorroles and metalloporphyrins, atmospheric pressure photoionization with dopant proved to be the most sensitive ionization method. It was also shown that for relatively acidic compounds, particularly for corroles, the negative ion mode provides better sensitivity than the positive ion mode. The results supply a lot of relevant information on the methodology of porphyrinoids analysis carried out by mass spectrometry. The information can be useful in designing future MS or liquid chromatography–MS experiments. Copyright © 2013 John Wiley & Sons, Ltd.     

The characterization of selected drugs with infrared laser desorption/tunable synchrotron vacuum ultraviolet photoionization mass spectrometry

Some selected drugs including captopril, fudosteine and racecadotril have been analyzed by infrared (IR) laser desorption/tunable synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry (PIMS). The molecular ions of captopril and racecadotril are exclusively observed without any fragments at near threshold single-photon ionization (SPI). However, fudosteine easily forms fragments even at a photon energy near the ionization threshold, indicating the instability of its molecular ion. For these drugs, a number of fragments are yielded with the increase of photon energy. The structures of such fragments proposed by IR LD/VUV PIMS are supported by electron ionization time-of-flight mass spectrometry (EI-TOFMS) results. Fragmentation pathways are discussed in detail.     

Using electrospray-assisted pyrolysis ionization/mass spectrometry for the rapid characterization of trace polar components in crude oil, amber, humic substances, and rubber samples

We describe the use of electrospray-assisted pyrolysis ionization/mass spectrometry (ESA-Py/MS) to selectively ionize trace polar compounds that coexist with large amounts of nonpolar hydrocarbons in crude oil, amber, humic substances, and rubber samples. Samples of different origins are distinguished rapidly by their positive ion ESA-Py mass spectra without prior separation or chemical pretreatment. During ESA-Py analysis, the samples in their solid or liquid states were pyrolyzed at 590, 630 or 940 degrees C using a commercial Curie-point pyrolysis probe. The gaseous pyrolysates were transferred into a glass reaction cell. The polar compounds (M) in the pyrolysates were then ionized by electrospray ionization (ESI), yielding protonated molecules (MH+). Although the major components of the pyrolysates are nonpolar hydrocarbons, their lack of functional groups that can receive a proton in the ESA-Py source results in no hydrocarbon ion signals being produced; thus, the positive ions detected in ESA-Py mass spectra all result from trace polar components in the pyrolysates.     

Structural determination of picomole amounts of phospholipids via electrospray ionization tandem mass spectrometry

The remarkable sensitivity of electrospray ionization was exploited to achieve great increases in the sensitivity of tandem mass spectrometric analyses of phospholipids derived from both synthetic and biologic sources. Herein, we demonstrate that (1) product-ion spectra after electrospray ionization can be obtained easily by utilizing ≤ 5 pmol of phospholipid with a mass-selected window of less than 2 mass units, (2) the low energy inherent in the electrospray ionization method facilitates analysis of labile molecular ions that are not easily detected with the relatively high energy employed during fast-atom bombardment desorption, and (3) collision-induced dissociation of precursor ions generated from electrospray ionization often resulted in novel product-ion patterns. Collectively, these results underscore the utility of electrospray ionization tandem mass spectroscopy for the structural determination of diminutive amounts of phospholipids.     

Thin‐layer chromatography and mass spectrometry coupled using proximal probe thermal desorption with electrospray or atmospheric pressure chemical ionization

An atmospheric pressure proximal probe thermal desorption sampling method coupled with secondary ionization by electrospray or atmospheric pressure chemical ionization was demonstrated for the mass spectrometric analysis of a diverse set of compounds (dyestuffs, pharmaceuticals, explosives and pesticides) separated on various high‐performance thin‐layer chromatography plates. Line scans along or through development lanes on the plates were carried out by moving the plate relative to a stationary heated probe positioned close to or just touching the stationary phase surface. Vapors of the compounds thermally desorbed from the surface were drawn into the ionization region of a combined electrospray ionization/atmospheric pressure chemical ionization source where they merged with reagent ions and/or charged droplets from a corona discharge or an electrospray emitter and were ionized. The ionized components were then drawn through the atmospheric pressure sampling orifice into the vacuum region of a triple quadrupole mass spectrometer and detected using full scan, single ion monitoring, or selected reaction monitoring mode. Studies of variable parameters and performance metrics including the proximal probe temperature, gas flow rate into the ionization region, surface scan speed, read‐out resolution, detection limits, and surface type are discussed. Published in 2010 by John Wiley & Sons, Ltd.     

Microplasma Discharge Vacuum Ultraviolet Photoionization Source for Atmospheric Pressure Ionization Mass Spectrometry

In this paper, we demonstrate the first use of an atmospheric pressure microplasma-based vacuum ultraviolet (VUV) photoionization source in atmospheric pressure mass spectrometry applications. The device is a robust, easy-to-operate microhollow cathode discharge (MHCD) that enables generation of VUV photons from Ne and Ne/H₂ gas mixtures. Photons were detected by excitation of a microchannel plate detector and by analysis of diagnostic sample ions using a mass spectrometer. Reactive ions, charged particles, and metastables produced in the discharge were blocked from entering the ionization region by means of a lithium fluoride window, and photoionization was performed in a nitrogen-purged environment. By reducing the output pressure of the MHCD, we observed heightened production of higher-energy photons, making the photoionization source more effective. The initial performance of the MHCD VUV source has been evaluated by ionizing model analytes such as acetone, azulene, benzene, dimethylaniline, and glycine, which were introduced in solid or liquid phase. These molecules represent species with both high and low proton affinities, and ionization energies ranging from 7.12 to 9.7 eV. Figure

?     

On the use of single-photon ionization for inorganic surface analysis

Summary A general surface analysis method has been developed based on non-selective photoionization of sputtered or desorbed neutral atoms and molecules above the surface, followed by time-of-flight mass spectrometry. The approach, currently utilizes two main types of ionizing radiation and a variety of desorption probes. For photoionization, coherent untuned sources are used; an intense focused pulsed UV laser beam is used for non-resonant multiphoton ionization to give elemental and limited chemical information, usually used for inorganic analysis; a coherent VUV source is used for single-photon ionization at 118 nm (10.5 eV) produced by frequency tripling of 355 nm light from a Nd:YAG laser. This paper focuses on single-photon ionization for inorganic systems. The desorption probes used are ion, electron, and laser beams as well as thermal desorption. For depth profiling, ion beams are specifically used. Any focused desorption probe beam can provide lateral spatial resolution.     

Photoionization Mass Spectrometry: A Useful Method to Evaluate the Pyrolysis Process of Glycoside Flavor Precursor

The thermal decomposition behavior and the pyrolysis products of benzyl‐2,3,4,6‐tetra‐O‐acetyl‐β‐D‐glucopyranoside (BGLU) were studied with synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry at temperatures of 300, 500 and 700 °C at 0.062 Pa. Several pyrolysis products and intermediates were identified by the measurement of photoionization mass spectra at different photon energies. The results indicated that the primary decomposition reaction was the cleavage of O‐glycosidic bond of the glycoside at low temperature, proven by the discoveries of benzyloxy radical (m/z = 107) and glycon radical (m/z = 331) in mass spectra. As pyrolysis temperature increased from 300 to 700 °C, two possible pyrolytic modes were observed. This work reported an application of synchrotron VUV photoionization mass spectrometry in the study of the thermal decomposition of glycoside flavor precursor, which was expected to help understand the thermal decomposition mechanism of this type of compound. The possibility of this glycoside to be used as a flavor precursor in high temperature process was evaluated.     

Rapid separation and identification of phenolic and diterpenoid constituents from Radix Salvia miltiorrhizae by high-performance liquid chromatography diode-array detection, electrospray ionization time-of-flight mass spectrometry and electrospray ionization quadrupole ion trap mass spectrometry

High-performance liquid chromatography-diode array detection (HPLC-DAD), electrospray ionization time-of-flight mass spectrometry (HPLC-ESI-TOF-MS) and electrospray ionization quadrupole ion trap mass spectrometry (HPLC-ESI-MSn) were used for the isolation, identification and structural analysis of water-soluble phenolic and nonpolar diterpenoid constituents in Dan-shen (Radix Salvia miltiorrhizae) which was prepared by sonication in 70% methanol. Mass spectra were obtained by ESI-TOF-MS and electrospray ionization quadrupole ion trap mass spectrometry (ESI-QIT-MS). A formula database of known constituents in Dan-shen was established and most constituents were rapidly identified by HPLC-DAD/ESI-TOF-MS by matching their accurate molecular masses with the formulae of the compounds in the database. Compounds with the same molecular formula could not be differentiated by TOF-MS; however, QIT-MS could differentiate those compounds and elucidate their structures based on their characteristic fragmentation. HPLC-DAD, HPLC/ESI-TOF-MS and HPLC/ESI-MSn provided complementary information for the identification of the constituents in Dan-shen. Forty constituents were identified in 30 min based on their positive and negative ion ESI mass spectra and liquid chromatographic information. Thus the method described is useful for the rapid analysis of multiple constituents in Dan-shen.     

Analysis of lipids with desorption atmospheric pressure photoionization‐mass spectrometry (DAPPI‐MS) and desorption electrospray ionization‐mass spectrometry (DESI‐MS)

In this article, the effect of spray solvent on the analysis of selected lipids including fatty acids, fat‐soluble vitamins, triacylglycerols, steroids, phospholipids, and sphingolipids has been studied by two different ambient mass spectrometry (MS) methods, desorption electrospray ionization‐MS (DESI‐MS) and desorption atmospheric pressure photoionization‐MS (DAPPI‐MS). The ionization of the lipids with DESI and DAPPI was strongly dependent on the spray solvent. In most cases, the lipids were detected as protonated or deprotonated molecules; however, other ions were also formed, such as adduct ions (in DESI), [M‐H]⁺ ions (in DESI and DAPPI), radical ions (in DAPPI), and abundant oxidation products (in DESI and DAPPI). DAPPI provided efficient desorption and ionization for neutral and less polar as well as for ionic lipids but caused extensive fragmentation for larger and more labile compounds because of a thermal desorption process. DESI was more suitable for the analysis of the large and labile lipids, but the ionization efficiency for less polar lipids was poor. Both methods were successfully applied to the direct analysis of lipids from pharmaceutical and food products. Although DESI and DAPPI provide efficient analysis of lipids, the multiple and largely unpredictable ionization reactions may set challenges for routine lipid analysis with these methods. Copyright © 2012 John Wiley & Sons, Ltd.     

Anisole, a new dopant for atmospheric pressure photoionization mass spectrometry of low proton affinity, low ionization energy compounds

Atmospheric pressure photoionization (APPI) is a novel method of ionization in liquid chromatography/mass spectrometry (LC/MS). It was originally developed in order to broaden the range of LC/MS ionizable compounds towards less polar compounds that cannot be analyzed by electrospray (ESI) and atmospheric pressure chemical ionization (APCI). Studies done thus far have shown that non-polar compounds that earlier were not ionizable in LC/MS can indeed be ionized by the use of APPI. However, the best ionization efficiency for low polarity samples has been achieved with low proton affinity (PA) solvents that are not suitable in reversed-phase LC (RP-LC). Here it is demonstrated that the signals for analytes with low proton affinities in acetonitrile can be increased 100-fold by using anisole as the dopant for APPI, which takes the sensitivity to the same level achieved in the analysis of high PA analytes.     

Matrix-assisted ionization vacuum for protein detection,fragmentation and PTM analysis on a high resolution linear ion trap-orbitrap platform

Matrix-assisted ionization vacuum (MAIV) is a novel ionization technique that generates multiply charged ions in vacuum without the use of laser ablation or high voltage. MAIV can be achieved in intermediate-vacuum and high-vacuum matrix-assisted laser desorption/ionization (MALDI) sources and electrospray ionization (ESI) sources without instrument modification. Herein, we adapt MAIV onto the MALDI-LTQ-Orbitrap XL platform for biomolecule analysis. As an attractive alternative to MALDI for in solution and in situ analysis of biomolecules, MAIV coupling to high resolution and accurate mass (HRAM) MS instrument has successfully expanded the mass detection range and improved the fragmentation efficiency due to the generation of multiply charged ions. Additionally, the softness of MAIV enables potential application in labile post-translational modification (PTM) analysis. In this study, proteins as large as 18.7 kDa were detected with up to 18 charges; intact peptides with labile PTM were well preserved during the ionization process and characterized MS/MS; peptides and proteins in complex tissue samples were detected and identified both in liquid extracts and in situ. Moreover, we demonstrated that this method facilitates MS/MS analysis with improved fragmentation efficiency compared to MALDI-MS/MS.