Simultaneous determination of Co, Ni, Cu and Zn ions in foodstuffs and vegetables with a new Schiff base using artificial neural networks

New complexes of Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ with a recently synthesized Schiff base derived from 3,6-bis((aminoethyl)thio)pyridazine were applied for their simultaneous determination with artificial neural networks. The analytical data show the ratio of metal to ligand in all metal complexes is 1:1. The absorption spectra were evaluated with respect to Schiff base concentration, pH and time of the color formation reactions. It was found that at pH 10.0 and 60 min after mixing, the complexation reactions are completed and the colored complexes exhibited absorption bands in the wavelength range 300-500 nm. Spectral data was reduced using principal component analysis and subjected to artificial neural networks. The data obtained from synthetic mixtures of four metal ions were processed by principal component-feed forward neural networks (PCFFNNs) and principal component-radial basis function networks (PCRBFNs). Performances of the proposed methods were tested with regard to root mean square errors of prediction (RMSEP%), using synthetic solutions. Under the working conditions, the proposed methods were successfully applied to simultaneous determination of Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ in different vegetable, foodstuff and pharmaceutical product samples.     

Simultaneous Determination of Nickel(II) and Copper(II) by Second‐Derivative Spectrophotometric Method in Micellar Media

A second‐derivative spectrophotometric method based on zero‐crossing over technique is developed in simultaneous determination of copper(II) and nickel(II) ions. Methylthymol blue (MTB) as a chromogenic reagent and cetyltrimethylammonium bromide as a surfactant were used, and measurements were carried out in buffered solution at pH 6 and at a temperature of 25 °C. The amplitude of derivative spectra was measured at wavelengths of 631.9 and 587.7 nm for the simultaneous determination of Ni²⁺ and Cu²⁺, respectively. Linearity was obtained in the range of 0.5–5.0 μg mL^?1 for both ions in the presence of 0.0–5.0 μg mL^?1 of the other ion as an interfering ion. IUPAC detection limits for Cu²⁺ and Ni²⁺ ions were obtained at 0.48 and 0.43 μg mL^?1, respectively. The proposed procedure has been applied successfully for the simultaneous determination of copper and nickel in synthetic binary mixtures and real samples.     

Flow-injection chemiluminescence simultaneous determination of cobalt(II) and copper(II) using partial least squares calibration

A flow-injection chemiluminescence (CL) system is proposed for simultaneous determination of Co²⁺ and Cu²⁺ using partial least squares (PLS) calibration. This method is based on the fact that both Co²⁺ and Cu²⁺ catalyse the CL reaction of luminol-H₂O₂, and that their kinetic characteristics of Co²⁺ and Cu²⁺ are significantly different in the luminol-H₂O₂ system. The CL intensity was measured and recorder at different reaction times of luminol-H₂O₂Co²⁺Cu²⁺, and the obtained data were processed by the chemometric approach of partial least squares. The experimental calibration set was composed of 16 sample solutions using an orthogonal calibration design for two component mixtures. The proposed method offers the potential advantages of high sensitivity, simplicity and rapidity for Co²⁺ and Cu²⁺ determination, and was successfully applied to the simultaneous determination of both analytes in real water sample. The present paper demonstrated that the simultaneous determination of two metal ions without any prior separation has been possible using flow-injection CL system.     

Enhanced Specificity and Sensitivity for the Determination of Nickel(II) by Square-wave Adsorptive Cathodic Stripping Voltammetry at Disposable Graphene-modified Pencil Graphite Electrodes

Chemical sensors relying on graphene-based materials have been widely used for electrochemical determination of metal ions and have demonstrated excellent signal amplification. This study reports an electrochemically reduced graphene oxide (ERGO)/mercury film (HgF) nanocomposite-modified pencil graphite electrode (PGE) prepared through successive electrochemical reduction of graphene oxide (GO) sheets and an in situ plated HgF. The ERGO-PG-HgFE, in combination with dimethylglyoxime (DMG) and square-wave adsorptive cathodic stripping voltammetry (SW-AdCSV), was evaluated for the determination of Ni²⁺ in tap and natural river water samples. A single-step electrode pre-concentration approach was employed for the in situ Hg-film electroplating, metal-chelate complex formation, and non-electrolytic adsorption at –0.7 V. The current response due to nickel-dimethylglyoxime [Ni(II)-DMG₂] complex reduction was studied as a function of experimental paratmeters including the accumulation potential, accumulation time, rotation speed, frequency and amplitude, and carefully optimized for the determination of Ni²⁺ at low concentration levels (μg?L^?1) in pH 9.4 of 0.1 M NH₃–NH₄Cl buffer. The reduction peak currents were linear with the Ni²⁺ concentration between 2 and 16?μg?L^?1. The limits of detection and quantitation were 0.120?±?0.002?µg?L^?1 and 0.401?±?0.007?µg?L^?1 respectively, for the determination of Ni²⁺ at an accumulation time of 120?s. The ERGO-PG-HgFE further demonstrated a highly selective stripping response toward Ni²⁺ determination compared to Co²⁺. The electrode was found to be sufficiently sensitive to determine metal ions in water samples at 0.1?µg?L^?1, well below the World Health Organization standards.     

Simultaneous determination of silicate and phosphate in environmental waters using pre-column derivatization ion-pair liquid chromatography

A highly sensitive HPLC method for the simultaneous determination of soluble silicate and phosphate in environmental waters was developed, using ion-pair liquid chromatography preceded by the formation of their yellow α-heteropolymolybdates. The moderate-pH mobile phase enabled to use a highly efficient reversed-phase silica column. The pre-column coloring reactions at moderate-pH were reproducible for both silicate and phosphate in all quantification ranges with R.S.D.s less than 2% and 5%, respectively. The linear calibration lines between concentrations (mg-SiO₂/L and mg-PO₄/L) and peak area intensities were obtained for silicate and phosphate both with acceptable determination coefficients (r²) of 0.9999. The limits of determination for both analytes were 0.007 mg-SiO₂/L and 0.003 mg-PO₄/L, which were calculated theoretically using 10σ/slope. The four-digit dynamic ranges were obtained for 0.007-10 mg-SiO₂/L and 0.003-20 mg-PO₄/L. The developed method was applied for the analysis of tap water, river water, coastal seawater, well water, hot-spring water, commercial mineral water, and laboratory water. The results were very reasonable and acceptable from the environmental viewpoints, which were well correlated with those confirmed by the molybdenum-blue spectrophotometry.     

Blends of polyester having amino sulfonic acid moieties with poly(vinyl alcohol) and their metal complex formation

Polyester having amino sulfonic acid moieties (TBES) was prepared by a liquid/solid biphase polycondensation of terephthaloyl chloride (TPC) and N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid (BES) in trimethyl phosphate (TMP) using triethylamine (TEA) as an acid acceptor. Blends of TBES with PVA and their metal complexes with Ni²⁺ and Co²⁺ ions were prepared. A strong interaction was observed between TBES and PVA. An electric conductivity of 10⁻⁶ S cm⁻¹ was attained for the blend films containing about 5 wt % water. A coordination structure with two chelate rings is proposed for the metal complex with Ni²⁺ and Co²⁺ ions when the molar ratio of amino sulfonic acid groups in TBES to metal ions is larger than 2. Polymer blends complexed with Ni²⁺ or Co²⁺ ions result in semi-interpenetrating polymer networks from chelate formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3561–3569, 1997     

A differential receptor for selective and quantitative multi-ion analysis for Co and Ni/Cu

The differential mode of complexation of chromogenic sensor 3 with Co²⁺ versus Ni²⁺ (or Cu²⁺) at pH 4.0 in water leads to new absorption bands at λ_max 620 nm in the case of Co²⁺, at λ_max 380 and 460 nm for Ni²⁺ and at λ_max 460 nm for Cu²⁺. These differential responses allow sensor 3 to be used for the selective and quantitative estimation of Co²⁺ and Ni²⁺ or Co²⁺ and Cu²⁺ from their mixtures.     

DPASV Method for Determination of Trace Concentrations of Manganese in Non-Buffered Chloride Solutions by Addition of Cyanide as a Masking Agent

 A highly sensitive, selective, and rapid differential pulse anodic stripping voltammetric method at HMDE is described for the determination of trace concentrations of Mn²⁺. The determination of Mn²⁺ in non-buffered chloride solution is seriously disturbed by the presence of Ni²⁺, Co²⁺, Cr³⁺, Zn²⁺ and Cu²⁺ due to intermetallic compound formation. The procedure is based on the addition of low amounts of cyanide as a masking agent. The interference of < 20 μgL⁻¹ of Ni²⁺, Co²⁺ and Cr³⁺ and < 75 μgL⁻¹ of Cu²⁺ and Zn²⁺ can thus be avoided, as the formed cyanide complexes prevent intermetallic compound formation during the short accumulation period. Thus, the addition of cyanide greatly improves the DPASV determination of manganese in non-buffered medium. A comparison between the determination of Mn²⁺ in the presence of a mixed cyanide/non-buffered chloride and in the ammoniacal buffer solution shows that the peak current of manganese in the presence of cyanide is four times higher with the same peak potential. The proposed method is shown to be applicable for the Mn²⁺ determination in both ground and tap water. A good agreement is obtained between the results by DPASV and AAS. Received May 14, 1999. Revision May 25, 2000.     

Simultaneous determination of metal ions as complexes of pentamethylene dithiocarbamate in Indus river water,Pakistan

River water samples before and after mixing with industrial effluents were collected at an interval of 4 weeks for one year and analyzed for simultaneous determination of Fe³⁺, Cr³⁺, Mn²⁺, Cu²⁺, Ni²⁺and Co²⁺ after preconcentration using pentamethylene dithiocarbamate (PMDTC) as derivatizing reagent and subsequent solvent extraction by high performance liquid chromatography (HPLC). The average levels (n = 12) of metal ions were found in the range of 14.2–542 μg/L. The results were then compared with a standard flame atomic absorption spectrophotometric method revealed no significant differences.     

Simultaneous Analysis of Co2+, Cu2+ Mn2+, Ni2+ and Zn2+ in The Ultraviolet Region Using 4-(Pyridil-2-AZO) Resorcinol and Multivariate Calibration

ABSTRACT

A multicomponent spectrophotometric methodology for the simultaneous determination of Co²⁺, Cu²⁺, Mn²⁺, Ni²⁺ and Zn²⁺ in aqueous solution is reported, using (4-(pyridil-2-azo) resorcinol), a diode array spectrophotometer and multivariate calibration by partial least-squares and principal component regerssions. Spectra are recorded in the UV region. The 225 – 320 nm range is selected as optimal, through a criterion based on tederivatives of the differences between individual spectra, which compares favorably with a genetic algorithm. The methodology is applied to the simultaneous determination of the five than 1.5 mgL^?1. The best result are obtanied at pH 9.0, with average absolute errors of prediction lower than 0.09 mgL^?1     

On-line preconcentration and simultaneous determination of heavy metal ions by inductively coupled plasma-atomic emission spectrometry

A flow injection analysis system for on-line preconcentration and simultaneous determination of Bi³⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe³⁺, Ni²⁺, Pb²⁺ and Zn²⁺ in aqueous samples by inductively coupled plasma (ICP)-atomic emission spectrometry with a charge coupled detector is described. The preconcentration of analytes is accomplished by retention of their chelates with sodium diethyldithiocarbamate in aqueous solution on a solid phase containing octadecyl silica in a minicolumn. Methanol, as eluent, is introduced into the conventional nebulizer of the ICP instrument. The effects of different parameters, including preconcentration flow rate (equal to sample flow rate (SR)), eluent flow rate (ER), weight of solid phase (W) and eluent loop volume (EV), were optimized by the super-modified simplex method. The optimum conditions were evaluated to be SR 7.2 ml min⁻¹, ER 3.5 ml min⁻¹, W of 100 mg and EV of 0.8 ml. An enrichment factor of 312.5 for each analyte was obtained. The detection limits of the proposed method for Bi³⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe³⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were evaluated as 1.3, 1.0, 0.8, 0.3, 14.7, 0.5, 5.5 and 0.1 ng l⁻¹, respectively. The effect of several metal ions on percent recovery was also studied. The method was applied to the recovery of these heavy metals from real matrices and to the simultaneous determination of these cations in different water samples.     

Preconcentration and Determination of Copper(II) by Novel Solid-Phase Extraction and High-Resolution Continuum Source Flame Atomic Absorption Spectrometry

Amberlite XAD-4 modified with N-para-anisidine-3,5-di-tert-butylsalicylaldimine was investigated as a new chealting sorbent for the selective separation and preconcentration of Cu(II). The metal ion was retained by chemical sorption on the modified resin, eluted by hydrochloric acid, and determined by high-resolution continuum source flame atomic absorption spectrometry. The prepared resin was characterized for the solid-phase extraction of Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ in a column. The influence of the pH, the mass of solid phase, eluent, flow rate, and sample volume was optimized. Using the optimum conditions, only Cu(II) showed quantitative sorption at the 95% confidence level, and the recoveries of the other metal ions were below 80%. A preconcentration factor 125 was obtained for Cu(II) with a limit of detection of 0.56?µg?L^?1. The method was used for the determination of Cu(II) in tap water, river water, tomato leaves, and fish. The relative standard deviation and the relative error were lower than 7%.     

A circular dichroism sensor for Ni and Co based on l-cysteine capped cadmium sulfide quantum dots

A new circular dichroism sensor for detecting Ni²⁺ and Co²⁺ was proposed for the first time using chiral chelating quantum dots. The detection principle was based on changing of circular dichroism signals of the chiral quantum dots when forming a chiral complex with Ni²⁺ or Co²⁺. l-Cysteine capped cadmium sulfide quantum dots (l-Cyst-CdS QDs) were proposed as a chiral probe. The CD spectrum of l-Cyst-CdS QDs was significantly changed in the presence of Ni²⁺ and Co²⁺. On the other hand, other studied cations did not alter the original CD spectrum. Moreover, when increasing the concentration of Ni²⁺ or Co²⁺, the intensity of the CD spectrum linearly increased as a function of concentration and could be useful for the quantitative analysis. The proposed CD sensor showed linear working concentration ranges of 10–60 μM and 4–80 μM with low detection limits of 7.33 μМ and 1.13 μM for the detection of Ni²⁺ and Co²⁺, respectively. Parameters possibly affected the detection sensitivity such as solution pH and incubation time were studied and optimized. The proposed sensor was applied to detect Ni²⁺ and Co²⁺ in real water samples, and the results agreed well with the analysis using the standard ICP-OES.     

Spectrofluorimetric determination of picogram level Pb(II) using a dimercaptothiadiazole fluorophore

This paper describes the spectrofluorimetric determination of picogram level Pb(II) using 2,5-dimercapto-1,3,4-thiadiazole (DMT) as a fluorophore. Excitation of DMT at 330 nm shows an emission maximum at 435 nm. The colorless solution of DMT changes into highly emittive yellow color immediately after the addition of 0.5 μM Pb(II) and nearly 245-fold increase in emission intensity at 435 nm was observed. These changes were attributed to the complex formation between Pb(II). The emission intensity linearly increases in the concentration range of 10–100 nM Pb(II) and DMT. Based on the fluorescence enhancement, the concentration of Pb(II) was determined. Interestingly, the emission intensity was increased even in the presence of 0.1 pM Pb(II). The fluorophore showed an extreme selectivity towards 100 nM Pb(II) even in the presence of 50,000-fold higher concentrations of common metal ions interferences such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Fe²⁺, Cd²⁺, Cr³⁺, Mn²⁺, Zn²⁺, Co²⁺, Ni²⁺ and 5000-, 100- and 40-fold of Cu²⁺, Hg²⁺ and Ag⁺ ions, respectively. The lowest detection of 20 pg L⁻¹ Pb(II) was achieved for the first time using DMT. The proposed method was successfully utilized for the determination of Pb(II) in tap water, polluted river water and industrial waste water samples. The results obtained in the present study were validated with both AAS and ICP-AES methods.     

Kationenaustausch an komplexbildender Cellulose mit α (β)-Alanin-N,N-diessigsäure-Ankergruppen

The efficiency of a complex forming cellulose ion-exchanger with α(β)-alanin-N,N-diacetic acid anchor groups, containing still weakly acid carboxylic groups, is compared with that of a modified carboxyethylcellulose with the same type of the anchoring carboxylic functional groups and its specific behaviour in column chromatography was followed by binary mixtures of the cations CrO ₄ ^2? , Fe³⁺, Cu²⁺, Ni²⁺, Pb²⁺, Co²⁺, Cd²⁺, Mn²⁺, Ca²⁺, Mg²⁺.     

Comparison of Partial Least Squares Regression and H-Point Standard Addition Method for Simultaneous Spectrophotometric Determination of Zinc, Cobalt and Nickel by 1-(2-Pyridylazo)2-Naphthol in Micellar Media

Simultaneous spectrophotometric methods are described for the determination of Zn²⁺, Co²⁺ and Ni²⁺ by 1-(2-pyridylazo)2-naphthol (PAN) in micellar media, using absorbance correction-H-point standard addition method (HPSAM) and partial least squares (PLS) regression. The ligand and its metal complexes, i.e. Zn²⁺-PAN, Co²⁺-PAN and Ni²⁺-PAN, were made water-soluble by the neutral surfactant Triton X-100, and therefore extraction with organic solvents was no longer required. Formation of all of these complexes was complete within 10min at pH 9.2. The linear range was 0.1–1.5mgL^–1 for Zn²⁺, 0.1–2.0mgL^–1 for Co²⁺ and 0.1–2.0mgL^–1 for Ni²⁺. The relative standard deviation (RSD) for the simultaneous determination of 0.50mgL^–1 each of Zn²⁺, Ni²⁺ and Co²⁺ by applying the H-point standard addition method was 2.55%, 2.04% and 3.70%, respectively. The total relative standard error for applying the PLS method to 9 synthetic samples in the linear ranges of these metals was 1.8%. Interference effects of common anions and cations were studied, and both methods were applied to the simultaneous determination of Zn²⁺, Co²⁺ and Ni²⁺ in alloy samples.     

Simultaneous Kinetic Determination of Phosphate and Silicate by Spectrophotometric H‐Point Standard Addition Method

The H‐point standard addition method (HPSAM), based on spectrophotometric measurements for simultaneous determination of phosphate and silicate, has been established. The method is based on the difference between their reactions rates with molybdenum in the presence of ascorbic acid. The results revealed that phosphate and silicate could be determined simultaneously with the concentration ratios of phosphate to silicate varying from 1:10 to 12:1 in the binary mixtures. The effects of chelating agent nature, time, interferents and experimental variables are also investigated. Under working conditions, the proposed method was successfully applied to the simultaneous determination of phosphate and silicate in synthetic detergents.     

Simultaneous determination of Mn(II), Cu(II) and Fe(III) as 2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol complexes by adsorptive cathodic stripping voltammetry at a carbon paste electrode

A simple and precise square-wave adsorptive cathodic stripping voltammetry (SW-AdCSV) method has been described for simultaneous determination of Mn(II), Cu(II) and Fe(III) in water samples using a carbon paste electrode. In 0.1 mol L⁻¹ acetate buffer (pH 5) containing 50 μmol L⁻¹ of 2-(5′-bromo-2′-pyridylazo)-5-diethylaminophenol (5-Br-PADAP), Mn(II), Cu(II) and Fe(III) were simultaneously determined as metal-complexes with 5-Br-PADAP following preconcentration onto the carbon paste electrode by adsorptive accumulation at +1.0 V (vs. Ag/AgCl/3 M KCl). Insignificant interference from various cations (K⁺, Na⁺, Mg²⁺, Ca²⁺, Al³⁺, Bi³⁺, Sb³⁺, Se⁴⁺, Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Pb²⁺, V⁵⁺, Ti⁴⁺ and NH₄⁺), anions (HCO₃⁻, Cl⁻, NO³⁻, SO₄²⁻ and PO₄³⁻) and ascorbic acid was noticed. Limits of detection of 0.066, 0.108 and 0.093 μg L⁻¹ and limits of quantitation of 0.22, 0.36 and 0.31 μg L⁻¹ Mn(II), Cu(II) and Fe(III), respectively, were achieved by the described method. The described stripping voltammetry method was successfully applied for simultaneous determination of Mn(II), Cu(II) and Fe(III) in ground, tap and bottled natural water samples.     

Chemometrics-assisted cross injection analysis for simultaneous determination of phosphate and silicate

This work presents a novel method for simultaneous spectrophotometric determination of phosphate and silicate by using a cross injection analysis (CIA) coupled with the use of partial least squares (PLS) for data evaluation. The detection principle is based on the well-known ‘molybdenum blue’ method. The molybdate ions in the presence of stannous chloride in acidic medium give phosphomolybdenum blue and silicomolybdenum blue as products. In this work, all the liquids, including sample and reagents were simultaneously introduced into a CIA platform by using two peristaltic pumps for controlling the x-channel and y-channel flow which was automatically manipulated by using in-house control board. Crossflow provides sufficient mixing inside the platform prior detection of the absorption spectra of blue complexes in the wavelength of 400–900 nm. Since spectra of the blue colour product of phosphate and silicate are resemblant, these two analytes therefore reciprocally interfere with one another. This results in difficulty in simultaneous analysis of phosphate and silicate. In this work, PLS was utilised as assistor of CIA system for simultaneous analysis of phosphate and silicate using molybdenum blue reaction without using any modification of reagents and addition of selective masking agent. The calibration ranges are 0.1–6 mgP L^?1 and 5–100 mgSi L^?1 for phosphate and silicate, respectively. By using CIA coupled with PLS for data evaluation, the analysis of two analytes was achieved within 1.5 min with only single injection. The developed system was applied to natural water samples and the system was validated with the conventional methods. By statistical paired t-test, there was no evidence of significant difference at 95% confidence level (t_stat = 2.28, t_critical = 2.31 and t_stat = 0.62, t_critical = 2.31 for phosphate and silicate, respectively). This implied that the chemometrics-assisted CIA system was successfully developed for simultaneous spectrophotometric determination of phosphate and silicate.     

Preconcentration and Determination of Trace Amounts of Heavy Metals in Water Samples Using Membrane Disk and Flame Atomic Absorption Spectrometry

A fast and simple method for preconcentration of Ni^2＋, Cd^2＋, Pb^2＋, Zn^2＋, Cu^2＋ and Co^2＋ from natural water samples was developed. The metal ions were complexed with sodium diethyldithiocarbamate （Na-DDTC）, then adsorbed onto octadecyl silica membrane disk, recovered and determined by FAAS. Extraction efficiency, influence of sample volume and eluent flow rates, effects of pH, amount of Na-DDTC, nature and amount of eluent for elution of metal ions from membrane disk, break through volume and limit of detection have been evaluated. The effect of foreign ions on the percent recovery of heavy metal ions has also been studied. The limit of detection of the proposed method for Ni^2＋, Cd^2＋, Pb^2＋, Zn^2＋, Cu^2＋ and Co^2＋was found to be 2.03, 0.47, 3.13, 0.44, 1.24 and 2.05 ng·mL^-1, respectively. The proposed （DDTC） method has been successfully applied to the recovery and determination of heavy metal ions in different water samples.