The chemistry of trimethylamine on Ru(001) and O/Ru(001)

The interaction and reactivity of trimethylamine (TMA) has been studied over clean and oxygen-covered Ru(001) under UHV conditions, as a model for the chemistry of high-density hydrocarbons on a catalytic surface. The molecule adsorbs intact at surface temperature below 100 K with the nitrogen end directed toward the surface, as indicated from work function change measurements. At coverage less than 0.05 ML (relative to the Ru substrate atoms), TMA fully dissociates upon surface heating, with hydrogen as the only evolving molecule following temperature-programmed reaction/desorption (TPR/TPD). At higher coverage, the parent molecule desorbs, and its desorption peak shifts down from 270 K to 115 K upon completion of the first monolayer, indicating a strong repulsion among neighbor molecules. The dipole moment of an adsorbed TMA molecule has been estimated from work function study to be 1.4 D. Oxygen precoverage on the ruthenium surface has shown efficient reactivity with TMA. It shifts the surface chemistry toward the production of various oxygen-containing stable molecules such as H2CO, CO2, and CO that desorb between 200 and 600 K, respectively. TMA at a coverage of 0.5 ML practically cleans off the surface from its oxygen atoms as a result of TPR up to 1650 K, in contrast to CO oxidation on the O/Ru(001) surface. The overall reactivity of TMA on the oxidized ruthenium surface has been described as a multistep reaction mechanism.     

Kinetics of electron-induced decomposition of CF2Cl2 coadsorbed with water (ice): a comparison with CCl4

The kinetics of decomposition and subsequent chemistry of adsorbed CF(2)Cl(2), activated by low-energy electron irradiation, have been examined and compared with CCl(4). These molecules have been adsorbed alone and coadsorbed with water ice films of different thicknesses on metal surfaces (Ru; Au) at low temperatures (25 K; 100 K). The studies have been performed with temperature programmed desorption (TPD), reflection absorption infrared spectroscopy (RAIRS), and x-ray photoelectron spectroscopy (XPS). TPD data reveal the efficient decomposition of both halocarbon molecules under electron bombardment, which proceeds via dissociative electron attachment (DEA) of low-energy secondary electrons. The rates of CF(2)Cl(2) and CCl(4) dissociation increase in an H(2)O (D(2)O) environment (2-3x), but the increase is smaller than that reported in recent literature. The highest initial cross sections for halocarbon decomposition coadsorbed with H(2)O, using 180 eV incident electrons, are measured (using TPD) to be 1.0+/-0.2 x 10(-15) cm(2) for CF(2)Cl(2) and 2.5+/-0.2 x 10(-15) cm(2) for CCl(4). RAIRS and XPS studies confirm the decomposition of halocarbon molecules codeposited with water molecules, and provide insights into the irradiation products. Electron-induced generation of Cl(-) and F(-) anions in the halocarbon/water films and production of H(3)O(+), CO(2), and intermediate compounds COF(2) (for CF(2)Cl(2)) and COCl(2), C(2)Cl(4) (for CCl(4)) under electron irradiation have been detected using XPS, TPD, and RAIRS. The products and the decomposition kinetics are similar to those observed in our recent experiments involving x-ray photons as the source of ionizing irradiation.     

Asymmetric inter- and intramolecular cyclopropanation of alkenes catalyzed by chiral ruthenium porphyrins. Synthesis and crystal structure of a chiral metalloporphyrin carbene complex.

Extensive investigations of asymmetric intermolecular cyclopropanation of terminal alkenes with diazoacetates catalyzed by ruthenium porphyrin [Ru(P*)(CO)(EtOH)] (1, H2P = 5,10,15,20-tetrakis[(1S,4R,5R,8S)-1,2,3,4,5,6,7,8-octahydro-1,4:5,8-dimethanoanthracene-9-yl]porphyrin) and the application of catalyst 1 to asymmetric intramolecular cyclopropanation of allylic or homoallylic diazoacetates are described. The intermolecular cyclopropanation of styrene and its derivatives with ethyl diazoacetate afforded the corresponding cyclopropyl esters in up to 98% ee with high trans/cis ratios of up to 36 and extremely high catalyst turnovers of up to 1.1 x 10(4). Examination of the effects of temperature, diazoacetate, solvent, and substituent in the intermolecular cyclopropanation reveals that (i) both enantioselectivity and trans selectivity increase with decreasing temperature, (ii) sterically encumbered diazoacetates N2CHCO2R, such as R = Bu(t), and donor solvents, such as diethyl ether and tetrahydrofuran, are beneficial to the trans selectivity, and (iii) electron-donating para substituents on styrene accelerate the cyclopropanations, with the log(k(X)/k(H)) vs sigma(+) plot for para-substituted styrenes p-X-C6H4CH=CH2 (X = MeO, Me, Cl, CF3) exhibiting good linearity with a small negative rho(+) value of -0.44 +/- 0.09. In the case of intramolecular cyclopropanation, complex 1 promoted the decomposition of a series of allylic diazoacetates to form the cyclopropyl lactones in up to 85% ee, contributing the first efficient metalloporphyrin catalyst for an asymmetric intramolecular cyclopropanation. Both the inter- and intramolecular cyclopropanations were proposed to proceed via a reactive chiral ruthenium carbene intermediate. The enantioselectivities in these processes were rationalized on the basis of the X-ray crystal structures of closely related stable chiral carbene complexes [Ru(P*)(CPh2)] (2) and [Ru(P*)(C(Ph)CO2CH2CH=CH2)] (3) obtained from reactions of complex 1 with N2CPh2 and N2C(Ph)CO2CH2CH=CH2, respectively.     

A chelate-stabilized ruthenium(sigma-pyrrolato) complex: resolving ambiguities in nuclearity and coordination geometry through 1H PGSE and 31P solid-state NMR studies

Reaction of RuCl2(PPh3)3 with LiNN' (NN' = 2-[(2,6-diisopropylphenyl)imino]pyrrolide) affords a single product, with the empirical formula RuCl[(2,6-iPr2C6H3)N=CHC4H3N](PPh3)2. We identify this species as a sigma-pyrrolato complex, [Ru(NN')(PPh3)2]2(mu-Cl)2 (3b), rather than mononuclear RuCl(NN')(PPh3)2 (3a), on the basis of detailed 1D and 2D NMR characterization in solution and in the solid state. Retention of the chelating, sigma-bound iminopyrrolato unit within 3b, despite the presence of labile (dative) chloride and PPh3 donors, indicates that the chelate effect is sufficient to inhibit sigma --> pi isomerization of 3b to a piano-stool, pi-pyrrolato structure. 2D COSY, SECSY, and J-resolved solid-state 31P NMR experiments confirm that the PPh3 ligands on each metal center are magnetically and crystallographically inequivalent, and 31P CP/MAS NMR experiments reveal the largest 99Ru-31P spin-spin coupling constant (1J(99Ru,31P) = 244 +/- 20 Hz) yet measured. Finally, 31P dipolar-chemical shift spectroscopy is applied to determine benchmark phosphorus chemical shift tensors for phosphine ligands in hexacoordinate ruthenium complexes.     

Multiphoton reactive surfaces using ruthenium(II) photocleavable cages

Photoreactive surfaces derived from a new photocleavable surface modification agent and with photosensitivity in the Vis and IR region are described. A ruthenium(II) caged aminosilane, [Ru(bpy)(2)(PMe(3))(APTS)](PF(6))(2), was synthesized and attached to silica surfaces. Light irradiation removed the cage and generated surface patterns with reactive amine groups. The photosensitivity of this compound under single (460 nm) and two-photon (900) excitation is demonstrated. Functional patterns with site-selective attachment of other molecular species are described.     

Decomposition of ruthenium olefin metathesis catalysts

The decomposition of a series of ruthenium metathesis catalysts has been examined using methylidene species as model complexes. All of the phosphine-containing methylidene complexes decomposed to generate methylphosphonium salts, and their decomposition routes followed first-order kinetics. The formation of these salts in high conversion, coupled with the observed kinetic behavior for this reaction, suggests that the major decomposition pathway involves nucleophilic attack of a dissociated phosphine on the methylidene carbon. This mechanism also is consistent with decomposition observed in the presence of ethylene as a model olefin substrate. The decomposition of phosphine-free catalyst (H2IMes)(Cl)2Ru=CH(2-C6H4-O-i-Pr) (H2IMes = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) with ethylene was found to generate unidentified ruthenium hydride species. The novel ruthenium complex (H2IMes)(pyridine)3(Cl)2Ru, which was generated during the synthetic attempts to prepare the highly unstable pyridine-based methylidene complex (H2IMes)(pyridine)2(Cl)2Ru=CH2, is also reported.     

Hydride Ligands Make the Difference: Density Functional Study of the Mechanism of the Murai Reaction Catalyzed by [Ru(H)(2) (H(2) )(2) (PR(3) )(2) ] (R=cyclohexyl)

The catalytic cycle for the Murai reaction at room temperature between ethylene and acetophenone catalyzed by [Ru(H)(2) (H(2) )(2) (PMe(3) )(2) ] has been studied computationally at the B3PW91 level. The active species is the ruthenium dihydride complex [Ru(H)(2) (PMe(3) )(2) ]. Coordination of the ketone group to Ru induces very easy C?H bond cleavage. Coordination of ethylene after ketone de-coordination, followed by ethylene insertion into a Ru?H bond, creates the Ru?ethyl bond. Isomerization of the complex to a Ru(IV) intermediate creates the geometry adapted to C?C bond formation. Re-coordination of the ketone before the C?C coupling lowers the energy of the corresponding TS. The highest point on the potential energy surface (PES) is the TS for the isomerization to the Ru(IV) intermediate, which prepares the catalyst geometry for the C?C coupling step. Inclusion of dispersion corrections significantly lowers the height of the overall activation barrier. The actual bond cleavage and bond forming processes are associated to low activation barriers because of the presence of hydrogen atoms around the Ru center. They act as redox buffers through formation and breaking of H?H bonds in the coordination sphere. This flexibility allows optimal repartition of the various ligands according to the change in stereoelectronic demands along the catalytic cycle.     

Rotationally resolved spectra of jet-cooled RuSi

We report the first gas-phase spectroscopic investigation of diatomic ruthenium silicide (RuSi). The molecules were produced by laser ablation of a Ru disk into a flow of helium carrier gas containing 0.5% SiH(4), and were cooled in a supersonic expansion. The RuSi molecules were then studied using resonant two-photon ionization spectroscopy. Investigations conducted in the spectral range from 18,800 to 23,800 cm(-1) show a large number of excited vibronic levels that cannot readily be grouped into electronic band systems. The ground state is been demonstrated to be of (3)Delta(3) symmetry, deriving from the 2delta(3)14sigma(1) electronic configuration. Correcting for the effects of the spin-uncoupling operator, the ground state bond length (r(0)) is determined to be 2.0921+/-0.0004 A (1sigma error limit). Diatomic RuSi is shown to have strong dpi-ppi bonds, unlike the isovalent AlCo molecule.     

Adsorption of H2O, CO2 and Xe on Soft Surfaces

The interactions of water, carbon dioxide, and Xe with octadecanethiol (C(18)H(37)SH, ODT) self-assembled monolayers (SAMs) were studied under ultrahigh vacuum conditions employing temperature-programmed desorption and optical diffraction measurements. The ODT layer was grown on a 1 nm thick gold film deposited over a Ru(001) single-crystal substrate. The gases used in this report differ in their lateral interactions while adsorbed on ODT-SAM being either repulsive (Xe) or attractive (H(2)O, CO(2)). The activation energies for desorption of the first layer from ODT are E(a) = 3.6 +/- 0.9, 4.1 +/- 0.5, and 8.5 +/- 0.9 kcal/mol for Xe, CO(2), and H(2)O, respectively. Sticking probabilities of the three gases on the soft ODT surface are S(0) = 0.7 +/- 0.1, 0.8 +/- 0.1, and 0.95 +/- 0.05 for xenon, CO(2), and water, respectively, derived from the respective adsorption curves. Optical diffraction studies from multilayer coverage grating of Xe on ODT-SAM have demonstrated that sublimation is a thermodynamically more favorable process over diffusion and wetting. The significantly lower binding energy of the first layers of H(2)O and CO(2) adsorbed on the soft surface of ODT compared to that on clean metals and oxides, reflects generally weak (CO(2)) and hydrophobic (H(2)O) interactions that are important for understanding the behavior of these molecules on interfaces that are found in biological systems.     

Empty level structure and dissociative electron attachment cross section in (bromoalkyl)benzenes

The gas-phase electron transmission (ET) and dissociative electron attachment (DEA) spectra are reported for the series of (bromoalkyl)benzenes C6H5(CH2)nBr (n = 0-3), where the bromine atom is directly bonded to a benzene ring or separated from it by 1-3 CH2 groups, and the dihalo derivative 1-Br-4-Cl-benzene. The relative DEA cross sections (essentially due to the Br- fragment) are reported, and the absolute cross sections are also evaluated. HF/6-31G and B3LYP/6-31G* calculations are employed to evaluate the virtual orbital energies (VOEs) for the optimized geometries of the neutral state molecules. The pi* VOEs, scaled with empirical equations, satisfactorily reproduce the corresponding experimental vertical electron attachment energies (VAEs). According to the calculated localization properties, the LUMO (as well as the singly occupied MO of the lowest lying anion state) of C6H5(CH2)3Br is largely localized on both the benzene ring and the C-Br bond, despite only a small pi*/sigma*C-Br interaction and in contrast to the chlorine analogue where the LUMO is predicted to possess essentially ring pi character. This would imply a less important role of intramolecular electron transfer in the bromo derivative for production of the halogen negative fragment through dissociation of the first resonant state. The VAEs calculated as the anion/neutral energy difference with the 6-31+G* basis set which includes diffuse functions are relatively close to the experimental values but do not parallel their sequence. In addition the SOMO of some compounds is not described as a valence MO with large pi* character but as a diffuse sigma* MO.     

TiO2-CeO2介孔复合氧化物的合成及应用

以氯化十六烷基吡啶(C16PyCl)为模板剂, 在室温、中性条件下合成了TiO2-CeO2介孔复合氧化物, 分别用红外光谱(FT-IR)、X射线粉末衍射(XRD)和BET 比表面测定等技术对介孔TiO2的结构、晶相和比表面积进行了表征. 结果表明, Ce4+的引入能稳定介孔结构. 负载活性组分Ru 后, Ru 颗粒与介孔复合载体发生相互作用, 尽管可能会部分堵塞孔道, 但对于甲醇分解为CO 和H2, Ru/m-TiO2-CeO2的催化活性依然远高于Ru/m-TiO2. Ru 和CeO2之间的相互作用对甲醇分解反应表现出协同效应.     

Intrazeolite ruthenium(0) nanoclusters: a superb catalyst for the hydrogenation of benzene and the hydrolysis of sodium borohydride

The use of microporous materials with ordered porous structures as the hosts to encapsulate metal nanoclusters has attracted particular interest in catalysis because the pore size restriction could limit the growth of nanoclusters and lead to an increase in the percentage of the catalytically active surface atoms. This letter reports the preparation of ruthenium(0) nanoclusters stabilized by the framework of Zeolite-Y by using a simple, easy, efficient method and their superb catalytic activities in two important reactions: the hydrogenation of arenes (benzene, toluene, o-xylene, mesitylene) and the hydrolysis of sodium borohydride, all at room temperature. Particularly, the intrazeolite ruthenium(0) nanoclusters exhibit unprecedented catalytic activity in the hydrogenation of neat benzene at 22.0 +/- 0.1 degrees C and 40 +/- 1 psig H2 with a record TOF of 1040 mol benzene/mol Ru . h.     

The electronic structure and adsorption geometry of L-histidine on Cu(110)

The adsorption of L-histidine on clean and oxygen-covered Cu(110) surfaces has been studied by soft X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The valence band spectra, carbon, nitrogen and oxygen 1 s XPS and N K edge absorption spectra were measured for submonolayer, monolayer, and multilayer films. The spectra provide a detailed picture of the electronic structure and adsorption geometry at each coverage. In the monolayer, the histidine molecules are randomly oriented, in contrast to the submonolayer regime, where the molecules are coordinated to the copper surface with the imidazole functional group nearly parallel to, and strongly interacting with, the surface. The pi*/sigma* intensity ratio in NEXAFS spectra at the nitrogen edge varies strongly with angle, showing the imidazole ring is oriented. Adsorption models are proposed.     

Influence of amines on the size control of in situ synthesized ruthenium nanoparticles in imidazolium ionic liquids

Very stable suspensions of small sized (c.a. 1.2 nm) and homogeneously dispersed ruthenium nanoparticles (RuNPs) were obtained by decomposition, under H(2), of (η(4)-1,5-cyclooctadiene)(η(6)-1,3,5-cyclooctatriene)ruthenium(0), [Ru(COD)(COT)], in various imidazolium derived ionic liquids (ILs: [RMIm][NTf(2)] (R = C(n)H(2n+1) where n = 2; 4; 6; 8; 10) and in the presence of amines as ligands (1-octylamine, 1-hexadecylamine). These nanoparticles were compared to others stabilized either in pure ILs or by the same ligands in THF. NMR experiments ((13)C solution and DOSY) demonstrate that the amines are coordinated to the surface of the RuNPs. These RuNPs were investigated for the hydrogenation of aromatics and have shown a high level of recyclability (up to 10 cycles) with neither loss of activity nor significant agglomeration.     

Phenylazo-pyridine and phenylazo-pyrazole chlorido ruthenium(II) arene complexes: arene loss, aquation, and cancer cell cytotoxicity

Ru(II) eta6-arene complexes containing p-cymene (p-cym), tetrahydronaphthalene (thn), benzene (bz), or biphenyl (bip), as the arene, phenylazopyridine derivatives (C5H4NN:NC6H5R; R = H (azpy), OH (azpy-OH), NMe2 (azpy-NMe2)) or a phenylazopyrazole derivative (NHC3H2NN:NC6H5NMe2 (azpyz-NMe2)) as N,N-chelating ligands and chloride as a ligand have been synthesized (1-16). The complexes are all intensely colored due to metal-to-ligand charge-transfer Ru 4d6-pi* and intraligand pi -->pi* transitions (eta = 5000-63 700 M-1 cm-1) occurring in the visible region. In the crystal structures of [(eta6-p-cym)Ru(azpy)Cl]PF6 (1), [(eta6-p-cym)Ru(azpy-NMe2)Cl]PF6 (5), and [(eta6-bip)Ru(azpy)Cl]PF6 (4), the relatively long Ru-N(azo) and Ru-(arene-centroid) distances suggest that phenylazopyridine and arene ligands can act as competitive pi-acceptors toward Ru(II) 4d6 electrons. The pKa* values of the pyridine nitrogens of the ligands are low (azpy 2.47, azpy-OH 3.06 and azpy-NMe2 4.60), suggesting that they are weak sigma-donors. This, together with their pi-acceptor behavior, serves to increase the positive charge on ruthenium, and together with the pi-acidic eta6-arene, partially accounts for the slow decomposition of the complexes via hydrolysis and/or arene loss (t(1/2) = 9-21 h for azopyridine complexes, 310 K). The pKa* of the coordinated water in [(eta6-p-cym)Ru(azpyz-NMe2)OH2]2+ (13A) is 4.60, consistent with the increased acidity of the ruthenium center upon coordination to the azo ligand. None of the azpy complexes were cytotoxic toward A2780 human ovarian or A549 human lung cancer cells, but several of the azpy-NMe2, azpy-OH, and azpyz-NMe2 complexes were active (IC50 values 18-88 microM).     

Ligand-stabilized ruthenium nanoparticles: synthesis, organization, and dynamics

The decomposition of the ruthenium precursor Ru(COD)(COT) (1, COD = 1,5-cyclooctadiene; COT = 1,3,5-cyclooctatriene) in mild conditions (room temperature, 1--3 bar H(2)) in THF leads, in the presence of a stabilizer (polymer or ligand), to nanoparticles of various sizes and shapes. In THF and in the presence of a polymer matrix (Ru/polymer = 5%), crystalline hcp particles of uniform mean size (1.1 nm) homogeneously dispersed in the polymer matrix and agglomerated hcp particles (1.7 nm) were respectively obtained in poly(vinylpyrrolidone) and cellulose acetate. The same reaction, carried out using various concentrations relative to ruthenium of alkylamines or alkylthiols as stabilizers (L = C(8)H(17)NH(2), C(12)H(25)NH(2), C(16)H(33)NH(2), C(8)H(17)SH, C(12)H(25)SH, or C(16)H(33)SH), leads to agglomerated particles (L = thiol) or particles dispersed in the solution (L = amine), both displaying a mean size near 2--3 nm and an hcp structure. In the case of amine ligands, the particles are generally elongated and display a tendency to form worm- or rodlike structures at high amine concentration. This phenomenon is attributed to a rapid amine ligand exchange at the surface of the particle as observed by (13)C NMR. In contrast, the particles stabilized by C(8)H(17)SH are not fluxional, but a catalytic transformation of thiols into disulfides has been observed which involves oxidative addition of thiols on the ruthenium surface. All colloids were characterized by microanalysis, infrared spectroscopy after CO adsorption, high-resolution electron microscopy, and wide-angle X-ray scattering.     

An NMR investigation of CO tolerance in a Pt/Ru fuel cell catalyst.

We report the first combined application of solid-state electrochemical NMR (EC NMR), cyclic voltammetry (CV), and potentiostatic current generation to investigate the topic of the ruthenium promotion of MeOH electro-oxidation over nanoscale platinum catalysts. The CV and EC NMR results give evidence for two types of CO: CO on essentially pure Pt and CO on Pt/Ru islands. There is no NMR evidence for rapid exchange between the two CO populations. CO molecules on the primarily Pt domains behave much like CO on pure Pt, with there being little effect of Ru on the Knight shift or on Korringa relaxation. In sharp contrast, COs on Pt/Ru have highly shifted (13)C NMR resonances, much weaker Korringa relaxation, and, at higher temperatures, they undergo thermally activated surface diffusion. For CO on Pt, the correlation observed between the 2pi* Fermi level local density of states and the steady-state current suggests a role for Ru in weakening the Pt-CO bond, thereby increasing the CO oxidation rate (current). The combined EC NMR/electrochemistry approach thus provides new insights into the promotion of CO tolerance in Pt/Ru fuel cell catalysts, in addition to providing a novel route to investigating promotion in heterogeneous catalysis in general.     

First example of mu(3)-sulfido bridged mixed-valent triruthenium complex triangle Ru(III)(2)Ru(II)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-S) (1) incorporating simultaneous O,O- and gamma-C-bonded bridging acetylacetonate units. Synthesis,crystal structure,and spectral and redox properties

The reaction of mononuclear ruthenium precursor [Ru(II)(acac)(2)(CH(3)CN)(2)] (acac = acetylacetonate) with the thiouracil ligand (2-thiouracil, H(2)L(1) or 6-methyl -2-thiouracil, H(2)L(2)) in the presence of NEt(3) as base in ethanol solvent afforded a trinuclear triangular complex Ru(3)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-sulfido) (1). In 1, each ruthenium center is linked to one usual O,O-bonded terminal acetylacetonate molecule whereas the other three acetylacetonate units act as bridging functions: each bridges two adjacent ruthenium ions through the terminal O,O-donor centers at one end and via the gamma-carbon center at the other end. Moreover, there is a mu(3)-sulfido bridging in the center of the complex unit, which essentially resulted via the selective cleavage of the carbon-sulfur bond of the thiouracil ligand. In diamagnetic complex 1, the ruthenium ions are in mixed valent Ru(III)Ru(III)Ru(II) state, where the paramagnetic ruthenium(III) ions are antiferromagnetically coupled. The single crystal X-ray structure of 1 showed two crystallographically independent C(3)-symmetric molecules, Ru(3)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-S) (1), in the asymmetric unit. Bond distances of both crystallographically independent molecules are almost identical, but there are some significant differences in bond angles (up to 6 degrees ) and interplanar angles (up to 8 degrees ). Each ruthenium atom exhibits a distorted octahedral environment formed by four oxygen atoms, two from each of the terminal and bridging acetylacetonate units, one gamma-carbon of an adjacent acetylacetonate ligand, and the sulfur atom in the center of the complex. In agreement with the expected 3-fold symmetry of the complex molecule, the (1)H and (13)C NMR spectra of 1 in CDCl(3) displayed signals corresponding to two types of ligand units. In dichloromethane solvent, 1 exhibited three metal center based successive quasireversible redox processes, Ru(III)Ru(III)Ru(III)-Ru(III)Ru(III)Ru(II) (couple I, 0.43 V vs SCE); Ru(III)Ru(III)Ru(IV)-Ru(III)Ru(III)Ru(III) (couple II, 1.12 V); and Ru(III)Ru(III)Ru(II)-Ru(III)Ru(II)Ru(II) (couple III, -1.21 V). However, in acetonitrile solvent, in addition to the three described couples [(couple I), 0.34 V; (couple II), 1.0 V; (couple III), -1.0], one irreversible oxidative response (Ru(III)Ru(III)Ru(IV) --> Ru(III)Ru(IV)Ru(IV) or oxidation of the coordinated sulfide center) appeared at E(pa), 1.50 V. The large differences in potentials between the successive couples are indicative of strong coupling between the ruthenium ions in the mixed-valent states. Compound 1 exhibited a moderately strong charge-transfer (CT) transition at 654 nm and multiple ligand based intense transitions in the UV region. In the Ru(III)Ru(III)Ru(III) (1(+)) state, the CT band was slightly blue shifted to 644 nm; however, the CT band was further blue shifted to 520 nm on two-electron oxidation to the Ru(III)Ru(III)Ru(IV) (1(2+)) state with a reduction in intensity.     

Diastereoselective Synthesis, Spectroscopy, and Electrochemistry of Ruthenium(II) Complexes of Substituted Pyrazolylpyridine Ligands

We report the synthesis of the hetero- and homoleptic ruthenium(II) complexes Ru(bpy)(2)L(2+), Ru(bpy)L(2)(2+) (bpy is 2,2'-bipyridine), and RuL(3)(2+) of six new bidentates L, the substituted pyrazolylpyridines 1-6 (1-substituted-3-(2-pyridinyl)-4,5,6,7-tetrahydroindazoles with substituents R = H, CH(3), Ph, or C(6)H(4)-4"-COOX where X = H, CH(3), or C(2)H(5)). These were fully characterized by (1)H- and (13)C-NMR spectroscopy and elemental analysis. The UV-visible spectra and redox properties of the complexes, some in the ruthenium(III) and reduced bipyridine oxidation states, are also discussed. The substituents R played a role in determining the stereochemistry of the Ru(bpy)L(2)(2+) and RuL(3)(2+) products. The reaction of Ru(DMSO)(4)Cl(2) with 3 equiv of L bearing aromatic substituents gave only meridional RuL(3)(2+) isomers. The one-step reaction of Ru(bpy)Cl(3).H(2)O with 2 equiv of L provided a mixture of the three possible Ru(bpy)L(2)(2+) isomers, from which one symmetric isomer (labeled beta) was isolated pure. A trans arrangement of the pyrazole groups was deduced by (1)H-NMR and confirmed by X-ray crystallography for one such stereomer (beta-[Ru(bpy)(5)(2)](PF(6))(2), R = C(6)H(4)-4"-COOC(2)H(5)). In contrast, Ru(DMSO)(4)Cl(2) reacted with 2 equiv of L and then 1 equiv of bpy to selectively form the other symmetric isomer (labeled alpha) where the pyridine groups of L are trans. Crystal data for beta-[Ru(bpy)(5)(2)](PF(6))(2) (C(52)H(50)N(8)O(4)F(12)P(2)Ru) with Mo Kalpha (lambda = 0.710 73 ?) radiation at 295 K: a = 28.442(13) ?, b = 18.469(15) ?, c = 23.785(9) ?, beta = 116.76(0) degrees, monoclinic, space group C2/c, Z = 8. Fully anisotropic (except for H and disordered F atoms), full-matrix, weighted least-squares refinement on F(2) gave a weighted R on F(2) of 0.2573 corresponding to R on F of 0.1031 for data where F > 4sigma(F ).     

Scope and mechanistic study of the ruthenium-catalyzed ortho-C-H bond activation and cyclization reactions of arylamines with terminal alkynes

The cationic ruthenium hydride complex [(PCy(3))(2)(CO)(CH(3)CN)(2)RuH](+)BF(4)(-) was found to be a highly effective catalyst for the C-H bond activation reaction of arylamines and terminal alkynes. The regioselective catalytic synthesis of substituted quinoline and quinoxaline derivatives was achieved from the ortho-C-H bond activation reaction of arylamines and terminal alkynes by using the catalyst Ru(3)(CO)(12)/HBF(4).OEt(2). The normal isotope effect (k(CH)/k(CD) = 2.5) was observed for the reaction of C(6)H(5)NH(2) and C(6)D(5)NH(2) with propyne. A highly negative Hammett value (rho = -4.4) was obtained from the correlation of the relative rates from a series of meta-substituted anilines, m-XC(6)H(4)NH(2), with sigma(p) in the presence of Ru(3)(CO)(12)/HBF(4).OEt(2) (3 mol % Ru, 1:3 molar ratio). The deuterium labeling studies from the reactions of both indoline and acyclic arylamines with DCCPh showed that the alkyne C-H bond activation step is reversible. The crossover experiment from the reaction of 1-(2-amino-1-phenyl)pyrrole with DCCPh and HCCC(6)H(4)-p-OMe led to preferential deuterium incorporation to the phenyl-substituted quinoline product. A mechanism involving rate-determining ortho-C-H bond activation and intramolecular C-N bond formation steps via an unsaturated cationic ruthenium acetylide complex has been proposed.