Structure Optimisation of a Possible 1.5-μm GaAs-based Vertical-cavity Surface-emitting Laser Diode with the GaInNAsSb/GaNAs Quantum-well Active Region

Structure optimisation of the GaAs-based GaInNAsSb/GaNAs quantum-well (QW) vertical-cavity surface-emitting diode lasers (VCSELs) has been carried out using the comprehensive three-dimensional self-consistent physical model of their room-temperature (RT) continuous-wave (CW) threshold operation. The model has been applied to investigate a possibility to use these devices as carrier-wave lasing sources in the third-generation optical-fibre communication. In this simulation, all physical (optical, electrical, thermal and gain) phenomena crucial for a laser operation including all important interactions between them are taken into consideration. As expected, the 1.5λ-cavity VCSEL has been found to demonstrate the lowest RT CW threshold. However, for many VCSEL applications, the analogous VCSEL equipped with a longer 3λ-cavity should be recommended because it exhibits only slightly higher threshold but manifest much better mode selectivity – the desired single-fundamental-mode operation has been preserved in these devices up to at least 380 K. The Auger recombination has been found to be decidedly the main reason of the threshold current increase at higher temperatures. A proper initial red detuning of the resonator wavelength with respect to the gain spectrum may drastically decrease CW lasing thresholds, especially at higher temperatures.     

Electric polarization rotation in a hexaferrite with long-wavelength magnetic structures

We report on the control of electric polarization (P) by using magnetic fields (B) in a hexaferrite having magnetic order above room temperature (RT). The material investigated is hexagonal Ba0.5Sr1.5Zn2Fe12O22, which is a nonferroelectric helimagnetic insulator in the zero-field ground state. By applying B, the system undergoes successive metamagnetic transitions, and shows concomitant ferroelectric order in some of the B-induced phases with long-wavelength magnetic structures. The magnetoelectrically induced P can be rotated 360 degrees by external B. This opens up the potential for not only RT magnetoelectric devices but also devices based on the magnetically controlled electro-optical response.     

Large room-temperature magnetoresistance and temperature-dependent magnetoresistance inversion in La0.67Sr0.33MnO3/Alq3 - Co nanocomposites/Co devices

Large room-temperature (RT) magnetoresistance (MR) and temperature-dependent MR inversion have been observed in tris (8-hydroxyquinoline) aluminum (Alq₃)-cobalt nanocomposites-based organic-inorganic hybrid devices. Negative MR-high resistance for parallel electrodes configuration — due to magnetization reversal of ferromagnetic (FM) electrodes has been observed at low temperatures. As the temperature increases, the MR undergoes a sign change. At room temperature, a positive MR of ∼9.7% with the resistivity dropping monotonously with increasing magnetic fields has been observed. The RT MR is about two orders of magnitude of that in organic-FM nanocomposites measured with nonmagnetic electrodes. The enhancement of RT MR is attributed to the injection of spin polarized carriers into Alq₃-Co nanocomposites.     

Comprehensive self-consistent three-dimensional simulation of an operation of the GaAs-based oxide-confined 1.3-μm quantum-dot (InGa)As/GaAs vertical-cavity surface-emitting lasers

In the paper, a comprehensive fully self-consistent three-dimensional simulation of an operation of the GaAs-based oxide-confined long-wavelength 1.3-m quantum-dot (QD)(InGa)As/GaAs vertical-cavity surface-emitting diode lasers is demonstrated. The model has been intentionally prepared for the PC-class microcomputers to enable its easy application in designing optimal structures of the above devices with desired performance characteristics. An impact of some structure parameters on QD VCSEL room-temperature (RT) continuous-wave (CW) lasing thresholds is discussed. A stable RT CW operation on a single fundamental mode has been found to be possible in modern QD VCSELs with active regions containing more uniform and more dense QDs in stacks of QD layers. The desired single fundamental-transverse-mode operation is possible for smaller active regions of diameters not exceeding 8 m. In the case of larger active regions, on the other hand, higher-order transverse modes of an increasing order are excited first because of increasingly more non-uniform optical-gain distributions.     

金属锡Rayleigh-Taylor不稳定性对模型参数敏感性的数值分析

利用自研的爆轰与冲击动力学欧拉计算程序和Steinberg-Guinan(SG)本构模型,数值模拟分析了样品初始参数(初始振幅、初始波长、样品初始厚度)和SG本构模型初始参数对爆轰驱动锡Rayleigh-Taylor(RT)不稳定性增长的影响。结果表明金属锡样品的初始参数对其RT不稳定性增长有很大的影响。RT不稳定性增长随着初始振幅的减小而减小,且存在一个截止初始振幅;存在一个最不稳定的模态(波长),当初始波长大于该波长时,RT不稳定性增长随着初始波长的减小而增大,反之,RT不稳定性增长随着初始波长的减小而减小;样品厚度的增大可以抑制RT不稳定性增长,而且存在一个样品截止厚度。金属锡的RT不稳定性增长对其SG本构模型应变硬化系数和应变硬化指数的变化不敏感,而对压力硬化系数和热软化系数比较敏感。从采用扰动增长法预估材料强度的角度来说,修正压力硬化系数以获得锡合理的材料强度是合理的途径。     

Ablation effects on weakly nonlinear Rayleigh-Taylor instability with a finite bandwidth

A weakly nonlinear but numerically tractable model (to third order in amplitude and including bandwidth effects) has been developed for the ablative Rayleigh-Taylor (RT) instability. Model results clearly show growth reduction from linear ablative RT values and even amplitude saturation in some realistic cases. For excitation of a band of wave numbers near the cutoff for growth, the behavior is dominated by the mode with the largest linear growth rate, and not by the mode with the largest initial amplitude. This type of model is likely to be important for the future assessment of the RT effects on specific target designs of the inertial confinement fusion.     

PROFINET的实时性及其协议分析

针对目前现场总线技术无法满足工业控制领域对信息传输的速率以及信息传输实时性的较高需求,PROFINET实时协议迅速发展起来,该协议在通信方面较现场总线技术有更好的实时性以及更高的传输速率;首先对标准TCP/IP协议进行了研究,分析了PROFINET对标准TCP/IP协议的优化方式;然后详细介绍了PROFINET RT和PROFINET IRT的帧结构以及基于具体数据的实时性分析,为西门子STEP7对PROFINET的组态配置提供了一定的借鉴作用;最后采用西门子的PROFINET IO设备、IO控制器等,通过STEP7的组态配置,验证了PROFINET IO之间的通信。     

Investigation of temperature characteristics of modern InAsP/InGaAsP multi-quantum-well TJ-VCSELs for optical fibre communication

Continuous-wave (CW) performance of modern 1.3-μm InAsP/InGaAsP multi-quantum-well (MQW) tunnel-junction vertical-cavity surface-emitting diode lasers (TJ-VCSELs) is investigated using our comprehensive self-consistent simulation model to suggest their optimal design for room and elevated temperatures. For increasing ambient temperatures, an increase in the VCSEL threshold current has happened to be mostly associated with the Auger recombination. Nevertheless, the InAsP/InGaAsP VCSELs have been found to exhibit encouraging thermal behaviour with the quite high value of maximal operating temperature of 350 K. It has been found that 5-μm devices seem to be the most optimal ones because they demonstrate both the room temperature (RT) threshold current equal to only 0.55 mA and maximum operating temperature equal to as much as 345 K. For these devices, the characteristic temperature T0 is equal to 92 K for 290–305 K, 51 K for 310–325 K and 29 K for 330–345 K. Therefore, the InAsP/InGaAsP VCSELs have been found to offer very promising performance both at room and elevated temperatures as sources of the carrier 1.3-μm wave in the fibre optical communication using silica fibres.     

任意Atwood数Rayleigh-Taylor和 Richtmyer-Meshkov 不稳定性气泡速度研究

本文将Layzer气泡模型推广到任意界面Atwood数情形,得到了自洽的微分方程组.该模型描述了气泡从早期的指数增长阶段到气 泡以渐近速度上升的非线性阶段的发展过程,给出了Rayleigh-Taylor(RT)和Richtmyer-Meshkov(RM)不稳定性的二维和 三维气泡速度渐近解,还求出了二维和三维RT不稳定性气泡顶点附近速度的解析解.     

A fast infrared radiative transfer model based on the adding-doubling method for hyperspectral remote-sensing applications

A fast infrared radiative transfer (RT) model is developed on the basis of the adding-doubling principle, hereafter referred to as FIRTM-AD, to facilitate the forward RT simulations involved in hyperspectral remote-sensing applications under cloudy-sky conditions. A pre-computed look-up table (LUT) of the bidirectional reflection and transmission functions and emissivities of ice clouds in conjunction with efficient interpolation schemes is used in FIRTM-AD to alleviate the computational burden of the doubling process. FIRTM-AD is applicable to a variety of cloud conditions, including vertically inhomogeneous or multilayered clouds. In particular, this RT model is suitable for the computation of high-spectral-resolution radiance and brightness temperature (BT) spectra at both the top-of-atmosphere and surface, and thus is useful for satellite and ground-based hyperspectral sensors. In terms of computer CPU time, FIRTM-AD is approximately 100-250 times faster than the well-known discrete-ordinate (DISORT) RT model for the same conditions. The errors of FIRTM-AD, specified as root-mean-square (RMS) BT differences with respect to their DISORT counterparts, are generally smaller than 0.1 K.     

Discrete-ordinate radiative transfer in a stratified medium with first-order rotational Raman scattering

Rotational Raman scattering (RRS) by air molecules in the Earth's atmosphere is predominantly responsible for the Ring effect: Fraunhofer and absorption-feature filling-in observed in UV/visible backscatter spectra. Accurate determination of RRS effects requires detailed radiative transfer (RT) treatment. In this paper, we demonstrate that the discrete-ordinate RT equations may be solved analytically in a multi-layer multiple scattering atmosphere in the presence of RRS treated as a first-order perturbation. Based on this solution, we develop a generic pseudo-spherical RT model LIDORT-RRS for the determination of backscatter radiances with RRS included; the model will generate output at arbitrary viewing geometry and optical thickness. Model comparisons with measured RRS filling-in effects from OMI observations show very good agreement. We examine telluric RRS filling-in effects for satellite-view backscatter radiances in a spectral range covering the ozone Huggins absorption bands. The model is also used to investigate calcium H and K Fraunhofer filling-in through cloud layers in the atmosphere.     

Effects of Compressibility on the Rayleigh-Taylor Instability in Z-pinch Implosions

In this paper we shall consider the effect of compressibility on the RT instability in Z-pinch implosions, importance is the comparing growth rates of the RT instability for two systems of the compressible and incompressible MHD plasma. For which reason, we shall use as simple model as possible. Obviously, slab geometry is the most simple. For example, in the case of annular plasma implosion, during the linear growth phase of the RT instability there are vacuums at both sides of the annular plasma shell and its thickness is sufficiently smaller than the pinch radius, allowing us to use slab geometry instead of the annular one. For simplicity, we do not consider the effects of the finite Larmor radius and the sheared axial flow which are the important physical mechanisms to compress the RT instabilities.     

轴向剪切流对Z箍缩等离子体瑞利-泰勒不稳定性的抑制

利用理想磁流体力学模型对有轴向剪切流的Z箍缩等离子体不稳定性进行了分析。给出了可压缩模型的色散关系,分别对可压缩及不可压缩模型中轴向剪切流对Z箍缩等离子体瑞利-泰勒不稳定性的抑制作用进行了比较,讨论了可压缩性对含有轴向剪切流系统不稳定性的影响。结果表明,可压缩性能够减缓瑞利-泰勒P凯尔文-亥姆霍兹(RTPKH)模扰动的增长,因而使得轴向剪切流对系统不稳定性的抑制作用表现得更为突出。计算结果还说明,在RT不稳定性线性增长阶段,等离子体温度较低,使用可压缩模型能够更真实地描述系统的状态。     

The effect of disordering on the spectral properties of partial monolayers of H on Si(111)

Ultraviolet photoemission measurements are reported for a H covered Si(111) surface for which the H coverage ranged from a fraction to a full monolayer. These measurements reveal striking differences depending whether the Si(111) substrate is kept at room temperature (RT) or 150°C. In particular, the 150°C sample UPS spectral series shows monotonic growth with little line shape change while the RT series shows significant line shape modification with coverage. These results are interpreted as island growth at 150°C and disordered adsorption at RT. Theoretical model calculations are carried out of the electron density of states of a fractional monolayer of H chemisorbed to Si(111) that reproduce the essential features of the RT data and confirm the role of disordering there.     

Analysis of Rayleigh–Taylor mixing-zone development by means of a multilayer perceptron

The problem of Rayleigh–Taylor (RT) instability is considered. The research technique is based on the statistical treatment of variants of the RT instability numerical simulations. Such treatment can be performed by means of neuron networks. To predict the mixing-zone width and embedded mass at arbitrary instants, a multilayer perceptron model is applied. The initial shape of a heavy–light liquid interface is used to make the prediction.     

SPICE modeling of flux-controlled unipolar memristive devices

Unipolar memristive devices are an important kind of resistive switching devices. However, few circuit models of them have been proposed. In this paper, we propose the SPICE modeling of flux-controlled unipolar memristive devices based on the memristance versus state map. Using our model, the flux thresholds, ON and OFF resistance, and compliance current can easily be set as model parameters. We simulate the model in HSPICE using model parameters abstracted from real devices, and the simulation results show that the proposed model caters to the real device data very well, thus demonstrating that the model is correct. Using the same modeling methodology, the SPICE model of charge-controlled unipolar memristive devices could also be developed. The proposed model could be used to model resistive memory cells, logical gates as well as synapses in artificial neural networks.     

非理想流体中Rayleigh-Taylor和Richtmyer-Meshkov不稳定性气泡速度研究

在随气泡顶端运动的坐标系中, 通过将理想流体模型推广到非理想流体的情况, 研究了流体黏性和表面张力对Rayleigh-Taylor (RT)和Richtmyer-Meshkov (RM)不稳定性气泡速度的影响. 首先得到了RT和RM不稳定性气泡运动的控制方程 (自洽的微分方程组); 其次给出了二维平面坐标和三维柱坐标中气泡速度的数值解和渐近解, 并定量分析了流体黏性和表面张力对RT和RM气泡速度和振幅的影响. 结果表明: 从线性阶段到非线性阶段的全过程中, 非理想流体中的气泡速度和振幅小于理想流体中的气泡速度和振幅. 也就是说, 流体黏性和表面张力对RT和RM不稳定性的发展都具有致稳作用. 关键词： Rayleigh-Taylor不稳定性 Richtmyer-Meshkov不稳定性 气泡速度 非理想流体     

Temperature and injection current dependent electroluminescence study of GaInP/AlGaInP quantum well laser diode grown using tertiarybutylarsine and tertiarybutylphosphine

GaInP/AlGaInP triple quantum well (TQW) lasers, grown by metalorganic chemical vapor deposition (MOCVD) using tertiarybutylarsine (TBAs) and tertiarybutylphosphine (TBP), were fabricated with a pulsed anodic oxidation (PAO) process. The devices worked at room temperature (RT) with the lowest threshold current density (J_th) of 1.5 kA/cm² ever reported for GaInP/AlGaInP lasers grown using TBAs and TBP. Temperature dependent (35–250 K) electroluminescence (EL) study of the GaInP/AlGaInP laser diode showed almost the same luminescence quenching behavior at a high temperature region (120–250 K), independent of the injection current (100–150 mA). A model involving a nonradiative recombination mechanism was presented to interpret the EL quenching behavior over the experimental temperature range. The nonradiative recombination centers in the Al-containing barrier or cladding layer are believed to contribute to the loss of carriers via nonradiative recombination. PACS 78.60.Fi; 71.20.Nr; 78.67.De; 81.15.Gh; 42.55.Px     

平面上方二维介质目标对高斯波束的电磁散射研究

基于矩量法、互易性定理及镜像理论,提出了一种新的混合方法用于研究水平分界面上方二维介质目标对垂直入射高斯波束的差值散射场.应用镜像理论,介质水平分界面可被原始目标相对于该分界面的镜像目标所替代,从而给出散射问题的等效模型.在等效模型中,应用矩量法求解了原始目标及镜像目标对高斯波束的散射场,同时结合互易性定理得到了原目标与其镜像目标之间的耦合散射场.数值计算结果与相关文献方法及MoM所得结果进行了比较,验证了该混合方法的有效性. 关键词： 互易性定理 电磁散射 高斯波束 二维目标     

Designing strategy to enhance mode selectivity of higher-output oxide-confined vertical-cavity surface-emitting lasers

Performance of modern oxide-confined (OC) vertical-cavity surface-emitting diode lasers (VCSEL s) is more sensitive to the construction details than in the case of other VCSEL s. In particular, a stable single-fundamental-mode operation is difficult to be achieved in these VCSEL s especially in higher-output large-size continuous-wave (cw) operating devices at higher temperatures. In the present paper, an operation of OC VCSEL s has been investigated with the aid of the comprehensive fully self-consistent model using the (GaIn)(NAs)/GaAs quantum-well VCSEL with two oxide apertures as a typical example. A new approach is proposed to enhance cw RT single-fundamental-mode low-threshold operation in higher-output OC VCSEL s. One of their oxide apertures should be shifted to the node position of the resonator standing wave where it is working as the electrical aperture only. Then diameters of both apertures may be changed independently giving an additional degree of freedom for VCSEL designing, which enables their optimisation. While the larger-diameter optical aperture placed in the anti-node position creates an efficient radial waveguiding effect, the smaller-diameter electrical aperture enhances a more uniform current injection into the VCSEL active region. Due to combining influence of both the apertures, the single-fundamental-mode operation is predicted in a large device with the 10-m-diameter active region even for 80 K active-region temperature increase over RT of the ambient. An impact of intentional detuning at room-temperature (RT) of VCSEL active-region gain spectrum towards shorter wavelengths with respect to the resonator mode improves mode selectivity is also analysed. PACS  42.55.Px; 02.60.Cb; 85.60.Bt