新型生物素标记的苦杏仁苷活性探针的合成

以苦杏仁苷结构中的糖羟基作为反应位点进行生物素化修饰,经酯化、缩醛化、Sonogashira偶联等反应合成了一个新型的生物素标记的苦杏仁苷活性探针,其结构经1H NMR,13C NMR,IR和HR-ESI-MS表征。     

生物油中反应性化合物对羧酸在超临界甲醇中酯化的影响

采用乙酸（AC）、丙烯酸（AR）、乙酰丙酮（AA）、糠醛、2-甲氧基苯酚（MP）和水等组分,研究了羧酸在超临界甲醇中的酯化反应,并考察了各种组分对酯化反应的影响。通过两种羧酸单独酯化和共同酯化的特性以及水分影响的考察发现,超临界酯化过程中存在着不同酸的酯交换作用;水分对酯化反应具有明显的抑制作用,但超临界酯化时具有更高的耐水性。水分的抑制作用主要是削弱了羰基正离子的亲电能力,降低酯化反应速率,而不是因为化学反应平衡移动。超临界酯化的高温可加快反应速率,较弱的氢键环境可部分抵消羰基正离子亲电能力的削弱作用。AA和糠醛对酯化反应基本没有影响,但AA自身会被转化为丙酮和乙酸甲酯,而糠醛会发生缩醛化反应。MP对AR的酯化具有促进作用,并抑制聚合,从而可以提高酯化的转化率和选择性。
     

廉价离子液体体系中玉米芯生成糠醛优化

采用廉价绿色离子液体[TEA][HSO4]作为溶剂,利用微波加热法辅助玉米芯水解并脱水制备糠醛.通过响应面法优化糠醛生成反应条件,有效转换玉米芯中的木糖,并得到82.2％糠醛收率.利用2-丁醇作为萃取剂对糠醛进行回收.重复4次萃取实验,从[TEA][HSO4]中回收99.7％糠醛.在2次[TEA][HSO4]的回收实验...     

氧化锆层柱磷酸锆的制备及性能

考察了不同制备因素对形成氧化锆层柱磷酸锆的影响,发现适中的锆离子浓度,较低的反应温度及较长的反应时间有利于形成稳定的氧化锆层柱磷酸锆。样品经250℃焙烧后形成较为规整的层柱结构,氧化锆柱与层板间以P-O-Zr键相连,比表面为107～183m^2/g,孔径较集中地为2.5nm。层柱样品表面只存在L酸位,无B酸位。对异丙醇脱水反应和苯甲醛还原反应有较好的反应活性,其比活性优于纯的氧化锆,表明它具有良好的酸催化和酸碱双功能催化作用。     

果糖在酸性离子液体中脱水制备5-羟甲基糠醛

制备了多种离子液体,并将其作为催化剂和溶剂催化果糖脱水制备5-羟甲基糠醛（HMF）。 制备的酸性离子液体包括磺酸基功能化酸性离子液体、咪唑类酸性离子液体和吡啶类酸性离子液体。 利用核磁共振仪和红外光谱仪对离子液体的结构进行表征。 利用紫外可见光分光光度计结合Hammett指示剂计算Hammett酸度函数,比较了酸强度的大小对反应的影响。 结果表明,离子液体的酸强度对反应有较大影响,在无其它催化剂和溶剂的情况下,离子液体具有较高的催化活性,通过使用1-丁基-3-甲基咪唑氯盐(BmimCl)作为催化剂,当反应温度为120 ℃,反应进行到4 h时,HMF收率可以达到74.97%。     

氧化锆层柱鳞酸锆的制备及性能

考察了不同制备因素对形成氧化锆层柱磷酸锆的影响,发现适中的锆离子浓度,较低的反应温度及较长的反应时间有利于形成稳定的氧化锆层柱磷酸锆.样品经250℃焙烧后形成较为规整的层柱结构,氧化锆柱与层板间以P-0-Zr键相连,比表面为107～183m2/g,孔径较集中地为2.5nm.层柱样品表面只存在L酸位,无B酸位.对异丙醇脱水反应和苯甲醛还原反应有较好的反应活性,其比活性优于纯的氧化锆,表明它具有良好的酸催化和酸碱双功能催化作用.     

柠檬醛及中间体的合成

以异戊烯醛和异戊烯醇为原料,经异戊烯酸催化缩醛化反应得到3-甲基-2-丁烯醛二异戊烯基缩醛,再经磷酸二氢铵催化消除反应得到顺/反-异戊二烯基-3-甲基丁二烯醚,并进一步热重排获得柠檬醛。研究了缩醛化反应条件和消除反应条件对转化率的影响。结果表明,以0.3%异戊烯酸为酸性催化剂,70～75℃共沸脱水反应8 h,异戊烯醛的单程转化率达到63%～64%,处理后可得含量为97.5%的3-甲基-2-丁烯醛二异戊烯基缩醛,收率96.8%;以0.2%～0.5%磷酸二氢铵为催化剂,100～130℃,2.66 kPa下反应并及时将反应产物蒸出,处理后得到含量为95.9%的顺/反-异戊二烯基-3-甲基丁二烯醚,收率97.0%。顺/反-异戊二烯基-3-甲基丁二烯醚在120～130℃重排反应1 h,其反应产物柠檬醛含量97.5%,收率90.2%。     

酸功能化离子液体固相催化材料的制备及应用

酸功能化离子液体固相催化材料是把酸性离子液体负载到无机载体、有机载体和金属-有机骨架化合物等多种类型的固相材料上,形成一种集酸性离子液体和固相载体性质于一身的新型多相催化材料,具有良好的催化活性,解决了催化剂重复性不好及分离困难等问题,在多种催化过程中发挥重要作用。本文综述了酸功能化离子液体固相催化材料的最新研究进展,重点介绍了基于不同载体的杂化材料的制备方法,及其在烷基化反应、缩醛化反应和酯化反应等多种催化反应中的应用,同时分析了目前应用过程中存在的问题,并对其前景进行了展望。     

ZnAl-LDHs热致拓扑转变的理论及实验研究

层状复合金属氢氧化物(LDHs)材料具有纳米尺度的二维层状结构.其晶体结构在煅烧的条件下可发生热致拓扑转变,利用此性质可以LDHs为前驱体制备高分散催化剂.本文采用基于密度泛函的第一性原理分子动力学模拟方法并结合热重分析(TG-DTA)研究了ZnAl-LDHs在升温过程的拓扑转变机理.通过TG-DTA数据明确了发生分解反应的两个关键性温度273和800℃,并在这两个温度进行模拟.在273℃,模拟了LDHs层间阴离子分解及层板脱羟基过程中金属离子的迁移机理,结果表明,层间阴离子CO_3~(2-)通过与主体层板作用形成单齿配体进行分解,产物水分子先于CO_2释放到层间区域内.此时LDHs层板结构已经坍塌,金属离子在层板方向及垂直层板方向都发生了显著的迁移,拓扑不变量(层板方向迁移度)变化明显.因此,ZnAl-LDHs不存在记忆效应.在800℃,模拟发现LDHs结构已经完全坍塌,生成了多孔性的混合金属氧化物,与文献实验结果相符合.本文从原子水平上理解了LDHs整个结构从分解的起始阶段到完全脱水的演变过程,并解释了ZnAl-LDHs没有记忆效应的原因,为认识LDHs热致拓扑转变机理,设计高分散催化剂提供了有益的理论信息和指导.     

曙红催化的缩醛化反应研究

以醇溶性曙红为催化剂,在温和条件下高效催化缩醛化反应,该催化体系适应于不同种类的脂肪醛或芳香醛与短链一元醇或二元醇的羰醇缩合反应,于室温反应24 h,缩醛化产物收率58%~99%,其结构经¹H NMR, ¹³C NMR和HR-MS确证。     

H+−H− Pairs in Partially Oxidized MAX Phases for Bifunctional Catalytic Conversion of Furfurals into Linear Ketones

Currently, less favorable C=O hydrogenation and weak concerted acid catalysis cause unsatisfactory catalytic performance in the upgrading of biomass-derived furfurals (i.e., furfural, 5-methyl furfural, and 5-hydroxymethyl furfural) to ketones (i.e., cyclopentanone, 2,5-hexanedione, and 1-hydroxyl-2,5-hexanedione). A series of partially oxidized MAX phase (i.e., Ti₃AlC₂, Ti₂AlC, Ti₃SiC₂) supporting Pd catalysts were fabricated, which showed high catalytic activity; Pd/Ti₃AlC₂ in particular displayed high performance for conversion of furfurals into targeted ketones. Detailed studies of the catalytic mechanism confirm that in situ hydrogen spillover generates Frustrated Lewis H⁺−H⁻ pairs, which not only act as the hydrogenation sites for selective C=O hydrogenation but also provide acid sites for ring opening. The close intimate hydrogenation and acid sites promote bifunctional catalytic reactions, substantially reducing the reported minimum reaction temperature of various furfurals by at least 30–60 °C.     

用Lewis酸或Brnsted酸催化剂和N2汽提法使木糖脱水为糠醛（英文）

The activity of Lewis (Nb2O5) and Br nsted (Amberlyst 70) acid catalysts for the cyclodehydration of xylose to furfural was studied. The nature of the acidity resulted in significant changes in the reaction mechanism. Lewis acid sites promote the formation of xylulose, while Br nsted acid sites are required to further dehydrate the sugar to furfural. Amberlyst 70 in water/toluene at 175 ℃ showed lower activity but gave a higher furfural yield. Using N2 as the stripping agent considerably improved the furfural yield and product purity in the stripped stream. Catalyst stability was also studied.     

Synthesis and catalytic performance of ZSM-5/MCM-41 composite molecular sieve from palygorskite

ZSM-5/MCM-41 composite molecular sieve has been hydrothermally synthesized through a two-step crystallization process using palygorskite (PAL) as silicon and aluminum source. The products were characterized by various means and their catalytic properties for acetalization of cyclohexanone and esterification of acetic acid and n-butanol were also investigated. In the first step ZSM-5 zeolite could be formed from the acid-treated PAL after hydrothermal treatment using tetrapropylammonium bromide as template. XRD patterns, N₂ adsorption and desorption data, and TEM images show that the composite obtained in the secondary step had a well-ordered mesoporous MCM-41 phase and a microporous ZSM-5 zeolite phase. Compared with ZSM-5, ZSM-5/MCM-41 composite possessed more total acid amount, weak acid sites and large pore structure due to the formation of MCM-41 and exhibited higher catalytic activity for the acetalization and esterification reaction.     

The composition and structure of polyvinyl butyral furfural: NMR study

With the use of ¹H NMR, ¹³C NMR and two-dimensional NMR spectroscopy, the composition and structure of polyvinyl butyral furfural samples obtained at different stages of poly(vinyl alcohol) acetalization have been determined. The structure of low-molecular-mass and oligomer admixtures that may be formed in the course of synthesis of the copolymer or during its dissolution in alcohol has been estimated via one-dimensional and two-dimensional diffusion NMR spectroscopy.     

介孔磷酸铌一锅法高效催化木糖制备糠醛

木糖转化到糠醛一般包括两步: 首先在酶、碱或路易斯(L)酸的催化作用下异构化木糖到木酮糖, 接下来木酮糖在酸的作用下脱水得到糠醛. 针对木糖水相脱水一步制备糠醛, 利用十六烷基三甲基溴化铵(CTAB)为模板剂, 借助软模板合作策略制备了一种抗水的新型固体酸催化剂, 介孔磷酸铌, 并利用X射线衍射(XRD)、N₂吸脱附、透射电镜(TEM)、氨气程序升温脱附(NH₃-TPD)和吡啶吸附傅里叶变换红外(Py-FTIR)光谱对材料的结构和酸性质进行了表征. 研究发现介孔磷酸铌不仅具有很高的比表面积(>200 m²·g^-1), 比较窄的孔径分布(3.5nm), 同时还具有很强的L酸性和布朗斯特(B)酸性. 通过L酸催化的木糖异构化为木酮糖/来苏糖和B酸催化的木酮糖/来苏糖进一步脱水得到糠醛, 实现了一步由木糖到糠醛的高效转化. 为了优化反应条件, 考察了水溶液中反应温度、投料质量比及反应时间对木糖转化率和糠醛收率的影响, 在最佳的反应条件下, 木糖的转化率为96.5%, 糠醛的收率达49.8%. 进一步地, 为了提高收率且易于分离, 利用4-甲基-2-戊酮(MIBK)/NaCl水溶液(体积比为7:3)作为反应混合溶剂, 使糠醛收率提高到68.4%.     

A Lamellar Coordination Polymer with Remarkable Catalytic Activity

A positively charged lamellar coordination polymer based on a flexible triphosphonic acid linker is reported. [Gd(H₄nmp)(H₂O)₂]Cl ? 2 H₂O ( 1 ) [H₆nmp=nitrilotris(methylenephosphonic acid)] was obtained by a one‐pot approach by using water as a green solvent and by forcing the inclusion of additional acid sites by employing HCl in the synthesis. Compound 1 acts as a versatile heterogeneous acid catalyst with outstanding activity in organic reactions such as alcoholysis of styrene oxide, acetalization of benzaldehyde and cyclohexanaldehyde and ketalization of cyclohexanone. For all reaction systems, very high conversions were reached (92–97 %) in only 15–30 min under mild conditions (35 °C, atmospheric pressure). The coordination polymer exhibits a protonic conductivity of 1.23×10^?5 S cm^?1 at 98 % relative humidity and 40 °C.     

Conversion factors for carbohydrate analysis by hydrolysis and <Superscript>1</Superscript>H-NMR spectroscopy

Conversion factor to calibrate the lower xylan content in carbohydrate compositional analysis in wood by ¹H-NMR spectroscopy was investigated. During acid hydrolysis, xylan monomer was dehydrated as furfural, and that furfural was further degraded or condensed in acidic reaction condition. Anomeric hydrogen peaks integration in ¹H-NMR spectroscopic method excluded xylose reacted products (such as furfural and their condensed or degraded products). Only 52% of xylose was counted in anomeric hydrogen integration and 62% of xylose was counted in integration of furfural peak and anomeric hydrogen. For accurate carbohydrate compositional analysis by NMR spectroscopic method, furfural and their reacted products should be counted as xylose. Conversion factor for xylose content analysis was introduced from the acid hydrolysis of several different combinations of standard cellulose and xylan. In this study xylan conversion factor 0.66 was obtained based on compared NMR data from the prepared cellulose and xylan mixtures acid hydrolyzed with the same condition for woodmeal and pulps. With corrected xylan content calculation, NMR spectroscopic method gave rather closer carbohydrate composition compared to the other analytical methods.     

Selective conversion of cellulose to levulinic acid and furfural in sulfolane/water solvent

Direct conversion of cellulose into levulinic acid and furfural in sulfolane media with the aid of water and H₂SO₄ was performed at 140–220 °C under the pressures of 0–1.5 MPa. This approach could obtain 72.5 mol% levulinic acid and 11.5 mol% furfural formation under an optimal condition in which the mass ratio of sulfolane, water and H₂SO₄ was 90:10:1. It was found that the decrease of water content led to an increasing yield of furfural and that the maximum furfural yield (51.1 mol%) could be obtained in the absence of water. The synergism of sulfolane and water in the selective liquefied system was demonstrated to be responsible for not only reinforced effect of optimizing and isolating the target products but also for reducing re-polymerization and side reactions. Furthermore, sulfolane in our case could be recycled and re-used for the conversion of cellulose with the same yield, which shed light on the remarkable potential for future industrial application.     

糠醛在Pt(111)表面的吸附和脱碳反应

采用广义梯度近似的密度泛函理论并结合平板模型的方法, 优化了糠醛分子在Pt(111)面的吸附模型,并探究了糠醛脱碳反应形成呋喃的机理. 结果表明: 吸附后糠醛分子环上的C―H(O)键及支链―CHO相对于金属表面倾斜上翘, 分子平面被扭曲, 易于呋喃的形成; 同时, 糠醛分子向Pt表面转移电子0.765e, 环中的大π键与Pt(111)表面的d轨道发生较强的相互作用, 使得糠醛的芳香性被破坏, 环上的碳原子呈现准sp³杂化. 此外, 对糠醛脱碳反应中的各反应步骤进行过渡态搜索, 通过比较各步骤的活化能, 得出糠醛更易先失去支链上的H形成酰基中间体(C₄H₃O)CO, 中间体继续脱碳加氢形成产物呋喃. 该过程的控速步骤为(C₄H₃O)CO^*+^*→C₄H₃O^*+CO^* (^*为吸附位),活化能为127.65 kJ·mol^-1.     

Effect of intercalation of metal ions on the colloidal and solid properties of vanadium pentaoxide hydrate,V2O5 nH2O

The colloidal stability of V₂O₅ nH₂O was studied on the basis of the measurements of critical flocculation concentration (CFC) by metal ions, amount of ions exchanged (or intercalated), and -potential. In total, the CFC values obeyed the Schulze Hardy law and strong Hofmeister's series was found in the systems including alkaline ions. The sequence of colloidal stability of V₂O₅ nH₂O in the electrolyte solutions was related to the intercalation of metal ions in the interlayer spaces of the solid. The largest CFC value for Li⁺ (87 mmol dm^–3) was explained by smaller affinity of Li⁺ to be intercalated in V₂O₅ nH₂O as well as smaller Hamaker constant of the intercalated solid compared to the other systems.Effect of intercalation of metal ions on the crystalline properties of the materials was measured by use of XRD and electron microscope. Under highly dehydrated condition the ions whose radii are smaller than 0.1 nm are captured in the structure of V₂O₅ nH₂O without changing interlayer distances, while those larger than 0.1 nm increase the interlayer distance. In a saturated H₂O vapor interlayer distances increased with increasing charge of intercalated ions. However, when intercalated with ions carrying the same valency the interlayer distances of the sample decreased with decrease in the hydration property of ions. Hydrolyzable Cr³⁺ gave exceptionally larger interlayer distances, both in a vacuum and in H₂O vapor.