Formation and reactivity of a porphyrin iridium hydride in water: acid dissociation constants and equilibrium thermodynamics relevant to Ir-H, Ir-OH, and Ir-CH2- bond dissociation energetics

Aqueous solutions of group nine metal(III) (M = Co, Rh, Ir) complexes of tetra(3,5-disulfonatomesityl)porphyrin [(TMPS)M(III)] form an equilibrium distribution of aquo and hydroxo complexes ([(TMPS)M(III)(D(2)O)(2-n)(OD)(n)]((7+n)-)). Evaluation of acid dissociation constants for coordinated water show that the extent of proton dissociation from water increases regularly on moving down the group from cobalt to iridium, which is consistent with the expected order of increasing metal-ligand bond strengths. Aqueous (D(2)O) solutions of [(TMPS)Ir(III)(D(2)O)(2)](7-) react with dihydrogen to form an iridium hydride complex ([(TMPS)Ir-D(D(2)O)](8-)) with an acid dissociation constant of 1.8(0.5) × 10(-12) (298 K), which is much smaller than the Rh-D derivative (4.3 (0.4) × 10(-8)), reflecting a stronger Ir-D bond. The iridium hydride complex adds with ethene and acetaldehyde to form organometallic derivatives [(TMPS)Ir-CH(2)CH(2)D(D(2)O)](8-) and [(TMPS)Ir-CH(OD)CH(3)(D(2)O)](8-). Only a six-coordinate carbonyl complex [(TMPS)Ir-D(CO)](8-) is observed for reaction of the Ir-D with CO (P(CO) = 0.2-2.0 atm), which contrasts with the (TMPS)Rh-D analog which reacts with CO to produce an equilibrium with a rhodium formyl complex ([(TMPS)Rh-CDO(D(2)O)](8-)). Reactivity studies and equilibrium thermodynamic measurements were used to discuss the relative M-X bond energetics (M = Rh, Ir; X = H, OH, and CH(2)-) and the thermodynamically favorable oxidative addition of water with the (TMPS)Ir(II) derivatives.     

Equilibrium thermodynamic studies in water: reactions of dihydrogen with rhodium(III) porphyrins relevant to Rh-Rh, Rh-H, and Rh-OH bond energetics

Aqueous solutions of rhodium(III) tetra p-sulfonatophenyl porphyrin ((TSPP)Rh(III)) complexes react with dihydrogen to produce equilibrium distributions between six rhodium species including rhodium hydride, rhodium(I), and rhodium(II) dimer complexes. Equilibrium thermodynamic studies (298 K) for this system establish the quantitative relationships that define the distribution of species in aqueous solution as a function of the dihydrogen and hydrogen ion concentrations through direct measurement of five equilibrium constants along with dissociation energies of D(2)O and dihydrogen in water. The hydride complex ([(TSPP)Rh-D(D(2)O)](-4)) is a weak acid (K(a)(298 K) = (8.0 +/- 0.5) x 10(-8)). Equilibrium constants and free energy changes for a series of reactions that could not be directly determined including homolysis reactions of the Rh(II)-Rh(II) dimer with water (D(2)O) and dihydrogen (D(2)) are derived from the directly measured equilibria. The rhodium hydride (Rh-D)(aq) and rhodium hydroxide (Rh-OD)(aq) bond dissociation free energies for [(TSPP)Rh-D(D(2)O)](-4) and [(TSPP)Rh-OD(D(2)O)](-4) in water are nearly equal (Rh-D = 60 +/- 3 kcal mol(-1), Rh-OD = 62 +/- 3 kcal mol(-1)). Free energy changes in aqueous media are reported for reactions that substitute hydroxide (OD(-)) (-11.9 +/- 0.1 kcal mol(-1)), hydride (D(-)) (-54.9 kcal mol(-1)), and (TSPP)Rh(I): (-7.3 +/- 0.1 kcal mol(-1)) for a water in [(TSPP)Rh(III)(D(2)O)(2)](-3) and for the rhodium hydride [(TSPP)Rh-D(D(2)O)](-4) to dissociate to produce a proton (9.7 +/- 0.1 kcal mol(-1)), a hydrogen atom (approximately 60 +/- 3 kcal mol(-1)), and a hydride (D(-)) (54.9 kcal mol(-1)) in water.     

Thermodynamics of rhodium hydride reactions with CO, aldehydes, and olefins in water: organo-rhodium porphyrin bond dissociation free energies

Tetra(p-sulfonato-phenyl) porphyrin rhodium hydride ([(TSPP)Rh-D(D2O)](-4)) (1) reacts in water (D2O) with carbon monoxide, aldehydes, and olefins to produce metallo formyl, alpha-hydroxyalkyl, and alkyl complexes, respectively. The hydride complex (1) functions as a weak acid in D2O and partially dissociates into a rhodium(I) complex ([(TSPP)Rh(I)(D2O)](-5)) and a proton (D+). Fast substrate reactions of 1 in D2O compared to reactions of rhodium porphyrin hydride ((por)Rh-H) in benzene are ascribed to aqueous media promoting formation of ions and supporting ionic reaction pathways. The regioselectivity for addition of 1 to olefins is predominantly anti-Markovnikov in acidic D2O and exclusively anti-Markovnikov in basic D2O. The range of accessible equilibrium thermodynamic measurements for rhodium hydride substrate reactions is substantially increased in water compared to that in organic media through exploiting the hydrogen ion dependence for the equilibrium distribution of species in aqueous media. Thermodynamic measurements are reported for reactions of a rhodium porphyrin hydride in water with each of the substrates, including CO, H2CO, CH3CHO, CH2=CH2, and sets of aldehydes and olefins. Reactions of rhodium porphyrin hydrides with CO and aldehydes have nearly equal free-energy changes in water and benzene, but alkene reactions that form hydrophobic alkyl groups are substantially less favorable in water than in benzene. Bond dissociation free energies in water are derived from thermodynamic results for (TSPP)Rh-organo complexes in aqueous solution for Rh-CDO, Rh-CH(R)OD, and Rh-CH2CH(D)R units and are compared with related values determined in benzene.     

Aqueous organometallic reactions of rhodium porphyrins: equilibrium thermodynamics

The reactivity and equilibrium thermodynamic studies of tetra-p-sulfonatophenyl porphyrin rhodium hydride ([(TSPP)Rh-D]-4) with CO, aldehydes and olefins that produce formyl, alpha-hydroxyalkyl and alkyl complexes have been explored in water and compared with the related reactions in non-aqueous media.     

Regioselectivity and equilibrium thermodynamics for addition of Rh-OH to olefins in water

Rhodium(III) tetra(p-sulfonato phenyl) porphyrin ((TSPP)Rh) aquo and hydroxo complexes react with a series of olefins in water to form beta-hydroxyalkyl complexes. Addition reactions of (TSPP)Rh-OH to unactivated terminal alkenes invariably occur with both kinetic and thermodynamic preferences to place rhodium on the terminal carbon to form (TSPP)Rh-CH(2)CH(OH)R complexes. Acrylic and styrenic olefins initially react to place rhodium on the terminal carbon to form Rh-CH(2)CH(OH)X as the kinetically preferred isomer but subsequently proceed to an equilibrium distribution of regioisomers where Rh-CH(CH(2)OH)X is the predominant thermodynamic product. Equilibrium constants for reactions of the diaquo rhodium(III) compound ([(TSPP)Rh(III)(H(2)O)(2)](-3)) in water with a series of terminal olefins that form beta-hydroxyalkyl complexes were directly evaluated and used in deriving thermodynamic values for addition of the Rh-OH unit to olefins. The DeltaG degrees for reactions of the Rh-OH unit with olefins in water is approximately 3 kcal mol(-1) less favorable than the comparable Rh-H reactions in water. Comparisons of the regioisomers and thermodynamics for addition reactions of olefins with Rh-H and Rh-OH units in water are presented and discussed.     

Ligand Fluorination to Optimize Preferential Oxidation (PROX) of Carbon Monoxide by Water-Soluble Rhodium Porphyrins

Catalytic, low temperature preferential oxidation (PROX) of carbon monoxide by aqueous [5,10,15,20-tetrakis(4-sulfonatophenyl)-2,3,7,8,12,13,17,18-octafluoroporphyrinato]rhodium(III) tetrasodium salt, (1[Rh(III)]) and [5,10,15,20-tetrakis(3-sulfonato-2,6-difluorophenyl)-2,3,7,8,12,13,17,18-octafluoroporphyrinato]rhodium(III) tetrasodium salt, (2[Rh(III)]) is reported. The PROX reaction occurs at ambient temperature in buffered (4 ≤ pH ≤ 13) aqueous solutions. Fluorination on the porphyrin periphery is shown to increase the CO PROX reaction rate, shift the metal centered redox potentials, and acidify ligated water molecules. Most importantly, β-fluorination increases the acidity of the rhodium hydride complex (pK(a) = 2.2 ± 0.2 for 2[Rh-D]); the dramatically increased acidity of the Rh(III) hydride complex precludes proton reduction and hydrogen activation near neutral pH, thereby permitting oxidation of CO to be unaffected by the presence of H(2). This new fluorinated water-soluble rhodium porphyrin-based homogenous catalyst system permits preferential oxidation of carbon monoxide in hydrogen gas streams at 308 °K using dioxygen or a sacrificial electron acceptor (indigo carmine) as the terminal oxidant.     

Stereochemical nonrigidity of a chiral rhodium boryl hydride complex: a sigma-borane complex as transition state for isomerization

Experimental and computational studies are reported on half-sandwich rhodium complexes that undergo B-H bond activation with pinacolborane (HBpin = HB(OCMe2CMe2O)). The photochemical reaction of [Rh(eta5-C5H5)(R,R-phospholane)(C2H4)] 3 (phospholane = PhP(CHMeCH2CH2CHMe)) with HBpin generates the boryl hydride in two distinguishable isomers [(SRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5a and [(RRh)-Rh(eta5-C5H5)(Bpin)(H)(R,R-phospholane)] 5b that undergo intramolecular exchange. The presence of a chiral phosphine allowed the determination of the interconversion rates (epimerization) by 1D 1H EXSY spectroscopy in C6D6 solution yielding DeltaH = 83.4 +/- 1.8 kJ mol-1 for conversion of 5a to 5b and 79.1 +/- 1.4 kJ mol-1 for 5b to 5a. Computational analysis yielded gas-phase energy barriers of 96.4 kJ mol-1 determined at the density functional theory (DFT, B3PW91) level for a model with PMe3 and B(OCH2CH2O) ligands; higher level calculations (MPW2PLYP) on an optimized QM/MM(ONIOM) geometry for the full system place the transition state 76.8 kJ mol-1 above the average energy of the two isomers. The calculations indicate that the exchange proceeds via a transition state with a sigma-B-H-bonded borane. The B-H bond lies in a mirror plane containing rhodium and phosphorus. No intermediate with an eta2-B-H ligand is detected either by experiment or calculation. Complex 3 has also been converted to the [Rh(eta5-C5H5)Br2(R,R-phospholane)] (characterized crystallographically) and [Rh(eta5-C5H5)(H)2(R,R-phospholane)]. The latter exhibits two inequivalent hydride resonances that undergo exchange with DeltaH = 101 +/- 2 kJ mol-1. DFT calculations indicate that the boryl hydride complex has a lower exchange barrier than the dihydride complex because of steric hindrance between the phospholane and Bpin ligands in the boryl hydride.     

Mechanistic studies on the reactions of cyanide with a water-soluble Fe(III) porphyrin and their effect on the binding of NO

The reaction of the water-soluble Fe(III)(TMPS) porphyrin with CN(-) in basic solution leads to the stepwise formation of Fe(III)(TMPS)(CN)(H(2)O) and Fe(III)(TMPS)(CN)(2). The kinetics of the reaction of CN(-) with Fe(III)(TMPS)(CN)(H(2)O) was studied as a function of temperature and pressure. The positive value of the activation volume for the formation of Fe(III)(TMPS)(CN)(2) is consistent with the operation of a dissociatively activated mechanism and confirms the six-coordinate nature of the monocyano complex. A good agreement between the rate constants at pH 8 and 9 for the formation of the dicyano complex implies the presence of water in the axial position trans to coordinated cyanide in the monocyano complex and eliminates the existence of Fe(III)(TMPS)(CN)(OH) under the selected reaction conditions. Both Fe(III)(TMPS)(CN)(H(2)O) and Fe(III)(TMPS)(CN)(2) bind nitric oxide (NO) to form the same nitrosyl complex, namely, Fe(II)(TMPS)(CN)(NO(+)). Kinetic studies indicate that nitrosylation of Fe(III)(TMPS)(CN)(2) follows a limiting dissociative mechanism that is supported by the independence of the observed rate constant on [NO] at an appropriately high excess of NO, and the positive values of both the activation parameters ΔS(?) and ΔV(?) found for the reaction under such conditions. The relatively small first-order rate constant for NO binding, namely, (1.54 ± 0.01) × 10(-2) s(-1), correlates with the rate constant for CN(-) release from the Fe(III)(TMPS)(CN)(2) complex, namely, (1.3 ± 0.2) × 10(-2) s(-1) at 20 °C, and supports the proposed nitrosylation mechanism.     

Rhodium complexes of a chelating ligand with imidazol-2-ylidene and pyridin-2-ylidene donors: the effect of C-metalation of nicotinamide groups on uptake of hydride ion

Rhodium complexes of the imidazolylidene (C-im) N-heterocyclic carbene (NHC) ligand, C-im-pyH(+), bearing a nicotinamide cation substituent (pyH(+)) have been targeted for ligand-centered uptake and delivery of hydride ion. This work reveals that rhodium(I) complexes such as [Rh(C-im-pyH(+))(COD)X][PF(6)] (1, a: X = Cl, b: X = I) undergo facile C-metalation of the nicotinamide ring to afford rhodium complexes of a novel chelate ligand, C,C'-im-py, with coordinated imidazolylidene (C(im)) and pyridylidene (C(py)) NHC-donors. Seven examples were characterized and include rhodium(III) monomers of the general formula [Rh(C,C'-im-py)L(x)I(2)](z+) (2: z = 1, L = H(2)O or solvent, x = 2; 3, 5, 7: z = 0, L = carboxylate, x = 1) and novel rhodium(II) dimers, the anti/syn-isomers of [Rh(2)(C,C'-im-py)(2)(μOAc)(2)I(2)] (4-anti/syn). The NMR data, backed by DFT calculations, is consistent with attribution of the C,C'-im-py ligand as a bis(carbene) donor. Single crystal X-ray diffraction studies are reported for 2, 3, 4-anti, 4-syn and 7. Consistently, within the each complex, the Rh-C(im) bond length is shorter than the Rh-C(py) bond length, which is the opposite trend to that expected based on simple electronic considerations. It is proposed that intramolecular steric interactions imposed by different rings in the rigid C,C'-im-py chelate ligand dictate the observed Rh-C(NHC) bond lengths. Attempts to add hydride to the C-metalated nicotinamide ring in 3 were unsuccessful. The redox behavior of 3 and 4 and, for comparison, an analogous bis(imidazolylidene)rhodium(III) monomer (8), were characterized by cyclic voltammetry, electron paramagnetic resonance (EPR), and UV-vis spectroelectrochemistry. In 3 and 4, the C-metalated nicotinamide ring is found to exhibit a one-electron reduction process at far lower potential (-2.34 V vs. Fc(+)/Fc in acetonitrile) than the two-electron nicotinamide cation-dihydronicotinamide couple found for the corresponding nonmetalated ring (-1.24 V). The C,C'-ligand is electrochemically silent over a large potential range (from -2.3 V to the anodic solvent limit), thus for both 3 and 4 the first reduction processes are metal-centered. For 4-anti, the cyclic voltammetry and UV-vis spectrochemical results are consistent with a diamagnetic [Rh(I)Rh(II)](2) tetrameric reduction product. Density functional theory (DFT) calculations were used to further probe the uptake of hydride ion by the nicotinamide ring, both before and after C-metalation. It is found that C-metalation significantly decreases the ability of the nicotinamide ring to take up hydride ion, which is attributed to the "carbene-like" character of a C-metalated pyridylidene ring.     

Synthesis, characterization, and DNA-binding and -photocleavage properties of water-soluble lanthanide porphyrinate complexes

A series of cationic lanthanide porphyrinate complexes of the general formula [(Por)Ln(H(2)O)(3)](+) (Ln(3+)=Yb(3+) and Er(3+)) were synthesized in moderate yields through the interaction of meso-pyridyl-substituted porphyrin free bases (H(2)Por) with [Ln{N(SiMe(3))(2)}(3)]·x[LiCl(thf)(3)], and the corresponding neutral derivatives [(Por)Ln(L(OMe))] (L(OMe)(-)=[(η(5)-C(5)H(5))Co{P(=O)(OMe)(2)}(3)](-)) were also prepared from [(Por)Ln(H(2)O)(3)](+) by the addition of the tripodal anion, L(OMe)(-), an effective encapsulating agent for lanthanide ions. Furthermore, the water-soluble lanthanide(III) porphyrinate complexes--including [(cis-DMPyDPP)Yb(H(2)O)(3)]Cl(3) (cis-DMPyDPP=5,10-bis(N-methylpyridinium-4'-y1)-15,20-di(phenyl)porphyrin), [(trans-DMPyDPP)Yb(H(2)O)(3)]Cl(3) (trans-DMPyDPP=5,15-bis(N-methylpyridinium-4'-y1)-10,20-di(phenyl)porphyrin), [(TMPyP)Yb(L(OMe))]I(4), and [(TMPyP)Er(L(OMe))]I(4) (TMPyP=tetrakis(N-methylpyridinium-4-y1)porphyrin)--were obtained by methylation of the corresponding complexes with methyl iodide and unambiguously characterized. The binding interactions and photocleavage activities of the water-soluble lanthanide(III) porphyrinate complexes towards DNA were investigated by UV-visible, fluorescence, and near-infrared luminescence spectroscopy, as well as circular dichroism and gel electrophoresis.     

Oxygen reduction reactions of monometallic rhodium hydride complexes

Selective reduction of oxygen is mediated by a series of monometallic rhodium(III) hydride complexes. Oxidative addition of HCl to trans-Rh(I)Cl(L)(PEt(3))(2) (1a, L = CO; 1b, L = 2,6-dimethylphenylisocyanide (CNXy); 1c, L = 1-adamantylisocyanide (CNAd)) produces the corresponding Rh(III) hydride complex cis-trans-Rh(III)Cl(2)H(L)(PEt(3))(2) (2a-c). The measured equilibrium constants for the HCl-addition reactions show a pronounced dependence on the identity of the "L" ligand. The hydride complexes effect the reduction of O(2) to water in the presence of HCl, generating trans-Rh(III)Cl(3)(L)(PEt(3))(2) (3a-c) as the metal-containing product. In the case of 2a, smooth conversion to 3a proceeds without spectroscopic evidence for an intermediate species. For 2b/c, an aqua intermediate, cis-trans-[Rh(III)(OH(2))Cl(2)(L)(PEt(3))(2)]Cl (5b/c), forms along the pathway to producing 3b/c as the final products. The aqua complexes were independently prepared by treating peroxo complexes trans-Rh(III)Cl(L)(η(2)-O(2))(PEt(3))(2) (4b/c) with HCl to rapidly produce a mixture of 5b/c and 3b/c. The reactivity of the peroxo species demonstrates that they are plausible intermediates in the O(2)-reduction chemistry of hydride complexes 2a-c. These results together show that monometallic rhodium hydride complexes are capable of promoting selective reduction of oxygen to water and that this reaction may be controlled with systematic alteration of the ancillary ligand set.     

Superoxo, peroxo, and hydroperoxo complexes formed from reactions of rhodium porphyrins with dioxygen: thermodynamics and kinetics

Rhodium(II) porphyrin complexes react with dioxygen to form terminal superoxo and bridged mu-peroxo complexes. Equilibrium constants for dioxygen complex formation with rhodium(II) tetramesitylporphyrin ((TMP)Rh*) and a m-xylyl-tethered dirhodium(II) diporphyrin complex (*Rh(m-xylyl)Rh*) are reported. (TMP)Rh-H reacts with oxygen to form a transient hydroperoxy complex ((TMP)Rh-OOH), which reacts on to form the rhodium(II) complex ((TMP)Rh*) and water. Kinetic studies for reactions of (TMP)Rh-H with O2 suggest a near concerted addition of dioxygen to the (TMP)Rh-H unit. Reactivity studies for mixtures of H2/O2 and CH4/O2 with the dirhodium(II) complex (*Rh(m-xylyl)Rh*) are reported.     

Aqueous rhodium(III) hydrides and mononuclear rhodium(II) complexes

In aqueous solutions, as in organic solvents, rhodium hydrides display the chemistry of one of the three limiting forms, i.e. {Rh(I)+ H+}, {Rh(II)+ H.}, and {Rh(III)+ H-}. A number of intermediates and oxidation states have been generated and explored in kinetic and mechanistic studies. Monomeric macrocyclic rhodium(II) complexes, such as L(H2O)Rh2+ (L = L1 = [14]aneN4, or L2 = meso-Me6[14]aneN4) can be generated from the hydride precursors by photochemical means or in reactions with hydrogen atom abstracting agents. These rhodium(II) complexes are oxidized rapidly with alkyl hydroperoxides to give alkylrhodium(III) complexes. Reactions of Rh(II) with organic and inorganic radicals and with molecular oxygen are fast and produce long-lived intermediates, such as alkyl, superoxo and hydroperoxo complexes, all of which display rich and complex chemistry of their own. In alkaline solutions of rhodium hydrides, the existence of Rh(I) complexes is implied by rapid hydrogen exchange between the hydride and solvent water. The acidity of the hydrides is too low, however, to allow the build-up of observable quantities of Rh(I). Deuterium kinetic isotope effects for hydride transfer to a macrocyclic Cr(v) complex are comparable to those for hydrogen atom transfer to various substrates.     

Visible light promoted hydroxylation of a Si-C(sp3) bond catalyzed by rhodium porphyrins in water

Catalytic activation of an unstrained, unactivated Si-C(sp(3)) bond in water to form methane and silanol by electrophilic rhodium(III) porphyrin [(por)Rh(III)] in acidic aqueous solutions under visible light (λ ≥ 420 nm) has been developed. Activation of the Si-C(sp(3)) bond occurs through direct Si-C bond cleavage, with methyl group transfer to rhodium to give a porphyrin rhodium methyl complex. Photolysis of (por)Rh-CH(3) in water yields methyl radical and (por)Rh(II). Subsequently, (por)Rh(II) reacts with water rapidly to produce (por)Rh-H and (por)Rh-OH. (por)Rh-OH is then protonated to regenerate (por)Rh(III)-OH(2), and (por)Rh-H undergoes hydrogen atom abstraction by methyl radical to form the observed methane.     

Anionic platinum complexes with 2-pyridylphosphines as ligands for rhodium: synthesis of zwitterionic Pt-Rh organometallic compounds

Bimetallic zwitterionic platinum(II)-rhodium(I) complexes of the type [(C(6)F(5))(3)Pt(micro-PPy(n)Ph(3)(-)(n)Rh(CO)(2))] and [(C(6)F(5))(3)Pt(micro-PPy(n)Ph(3)(-)(n)())Rh(diene))] (n = 2, 3; Py = 2-pyridyl) have been prepared. The P end of the bridging ligands (micro-PPy(n)Ph(3)(-)(n)) is always coordinated to the Pt center, while the N-donor ends chelate the Rh atom, giving metallacycles comparable to pyrazolylborate-Rh complexes. These metallacycles can adopt two conformations, either with the Pt complex in pseudoaxial position approaching the Rh center or with the Pt complex in a remote position. The preferred conformation depends on the steric hindrance at the rhodium center. In less sterically demanding Rh-carbonyl complexes the Pt moiety gets close to the Rh moiety as this brings closer the opposite charges of the zwitterion. For diene complexes mixtures of conformers are obtained. The X-ray structures of [(C(6)F(5))(3)Pt(micro-PPhPy(2))Rh(COD)] (COD = 1,5-cyclooctadiene) and [(C(6)F(5))(3)Pt(micro-PPhPy(2))Rh(CO)(2)] are reported.     

Solvent-dependent interconversions between Rh(I), Rh(II), and Rh(III) complexes of an aryl-monophosphine ligand

Reaction of the aryl-monophosphine ligand alpha(2)-(diisopropylphosphino)isodurene (1) with the Rh(I) precursor [Rh(coe)(2)(acetone)(2)]BF(4) (coe=cyclooctene) in different solvents yielded complexes of all three common oxidation states of rhodium, depending on the solvent used. When the reaction was carried out in methanol a cyclometalated, solvent-stabilized Rh(III) alkyl-hydride complex (2) was obtained. However, when the reaction was carried out in acetone or dichloromethane a dinuclear eta(6)-arene Rh(II) complex (5) was obtained in the absence of added redox reagents. Moreover, when acetonitrile was added to a solution of either the Rh(II) or Rh(III) complexes, a new solvent-stabilized, noncyclometalated Rh(I) complex (6) was obtained. In this report we describe the different complexes, which were fully characterized, and probe the processes behind the remarkable solvent effect observed.     

Kinetics and mechanism of the reduction of a macrocyclic Rh(III) complex by chromium(II) ions: pH-controlled selectivity to rhodium(II) vs. rhodium(III) hydride

Aqueous chromium(II) ions reduce a macrocyclic Rh(III) complex L(1)(H(2)O)(2)Rh(3+) (L(1) = 1,4,8,11-tetraazacyclotetradecane) to the hydride L(1)(H(2)O)RhH(2+) in two discrete, one-electron steps. The first step generates L(1)(H(2)O)Rh(2+) with kinetics that are first order in each rhodium(III) complex and Cr(H(2)O)(6)(2+), and inverse in [H(+)], k/M(-1) s(-1) = 0.065/(0.0031 + [H(+)]). Further reduction of L(1)(H(2)O)Rh(2+) to L(1)(H(2)O)RhH(2+) is kinetically independent of [H(+)], k/M(-1) s(-1) = 0.30. The difference in [H(+)] dependence allows relative rates of the two steps to be manipulated to generate either L(1)(H(2)O)Rh(2+) or L(1)(H(2)O)RhH(2+) as the final product.     

Interplay between solvent and counteranion stabilization of highly unsaturated rhodium(III) complexes: facile unsaturation-induced dearomatization

Abstraction of the chloride ligand from the PCN-based chloromethylrhodium complex 2 by AgX (X=BF(4)(-), CF(3)SO(3)(-)) or a direct C-C cleavage reaction of the PCN ligand 1 with [(coe)(2)Rh(solv)(n)](+)X(-) (coe=cyclooctene) lead to the formation of the coordinatively unsaturated rhodium(III) complexes 3. Compound 3 a (X=BF(4)(-)) exhibits a unique medium effect; the metal center is stabilized by reversible coordination of the bulky counteranion or solvent as a function of temperature. Reaction of [(PCN)Rh(CH(3))(Cl)] with AgBAr(f) in diethyl ether leads to an apparent rhodium(III) 14-electron complex 4, which is stabilized by reversible, weak coordination of a solvent molecule. This complex coordinates donors as weak as diethyl ether and dichloromethane. Upon substitution of the BF(4)(-) ion in [(PCN)Rh(CH(3))]BF(4) by the noncoordinating BAr(f)(-) ion in a noncoordinating medium, the resulting highly unsaturated intermediate undergoes a 1,2-metal-to-carbon methyl shift, followed by beta-hydrogen elimination, leading to the Rh-stabilized methylene arenium complex 5. This process represents a unique mild, dearomatization of the aromatic system induced by unsaturation.     

Mononuclear Rh(II) PNP-type complexes. Structure and reactivity

The Rh(II) mononuclear complexes [(PNPtBu)RhCl][BF4] (2), [(PNPtBu)Rh(OC(O)CF3)][OC(O)CF3] (4), and [(PNPtBu)Rh(acetone)][BF4]2 (6) were synthesized by oxidation of the corresponding Rh(I) analogs with silver salts. On the other hand, treatment of (PNPtBu)RhCl with AgOC(O)CF3 led only to chloride abstraction, with no oxidation. 2 and 6 were characterized by X-ray diffraction, EPR, cyclic voltammetry, and dipole moment measurements. 2 and 6 react with NO gas to give the diamagnetic complexes [(PNPtBu)Rh(NO)Cl][BF4] (7) and [(PNPtBu)Rh(NO)(acetone)][BF4]2 (8) respectively. 6 is reduced to Rh(I) in the presence of phosphines, CO, or isonitriles to give the Rh(I) complexes [(PNPtBu)Rh(PR3)][BF4] (11, 12) (R = Et, Ph), [(PNPtBu)Rh(CO)][BF4] (13) and [(PNPtBu)Rh(L)][BF4] (15, 16) (L = tert-butyl isonitrile or 2,6-dimethylphenyl isonitrile), respectively. On the other hand, 2 disproportionates to Rh(I) and Rh(III) complexes in the presence of acetonitrile, isonitriles, or CO. 2 is also reduced by triethylphosphine and water to Rh(I) complexes [(PNPtBu)RhCl] (1) and [(PNPtBu)Rh(PEt3)][BF4] (11). When triphenylphosphine and water are used, the reduced Rh(I) complex reacts with a proton, which is formed in the redox reaction, to give a Rh(III) complex with a coordinated BF4, [(PNPtBu)Rh(Cl)(H)(BF4)] (9).     

Heteronuclear rhodium, palladium, platinum, and gold organoimido complexes from dinuclear organoamido rhodium precursors

Treatment of the organoamido complexes [Rh(2)(mu-4-HNC(6)H(4)Me)(2)(L(2))(2)] (L(2) = 1,5-cyclooctadiene (cod), L = CO) with nBuLi gave solutions of the organoimido species [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(L(2))(2)]. Further reaction of [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(cod)(2)] with [Rh(2)(mu-Cl)(2)(cod)(2)] afforded the neutral tetranuclear complex [Rh(4)(mu-4-NC(6)H(4)Me)(2)(cod)(4)] (2), which rationalizes the direct syntheses of 2 from [Rh(2)(mu-Cl)(2)(cod)(2)] and Li(2)NC(6)H(4)Me. Reactions of [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(CO)(4)] with chloro complexes such as [Rh(2)(mu-Cl)(2)(CO)(4)], [MCl(2)(cod)] (M = Pd, Pt), and [Ru(2)(mu-Cl)(2)Cl(2)(p-cymene)(2)] afforded the homo- and heterotrinuclear complexes PPN[Rh(3)(mu-4-NC(6)H(4)Me)(2)(CO)(6)] (5; PPN=bis(triphenylphosphine)iminium), [(CO)(4)Rh(2)(mu-4-NC(6)H(4)Me)(2)M(cod)] (M = Pd (6), Pt(7)) and [(CO)(4)Rh(2)(mu-4-NC(6)H(4)Me)(2)Ru(p-cymene)] (8), while the reaction with [AuCl(PPh(3))] gave the tetranuclear compound [(CO)(4)Rh(2)(mu--4-NC(6)H(4)Me)(2)[Au(PPh(3))](2)] (9). The structures of complexes 6, 8, and 9 were determined by X-ray diffraction studies. The anion of 5 reacts with [AuCl(PPh(3))] to give the butterfly cluster [[Rh(3)(mu-4-NC(6)H(4)Me)(2)(CO)(6)]Au(PPh(3))] (10), in which the Au atom is bonded to two rhodium atoms. Reaction of the anion of 5 with [Rh(cod)(NCMe)(2)](BF(4)) gave the tetranuclear complex [Rh(4)(mu-4-NC(6)H(4)Me)(2)(CO)(6)(cod)] (11) in which the Rh(cod) fragment is pi-bonded to one of the arene rings, while the reaction of the anion of 5 with [PdCl(2)(cod)] afforded the heterotrinuclear complex 6 through a metal exchange process.