Regioselectivity and equilibrium thermodynamics for addition of Rh-OH to olefins in water

Rhodium(III) tetra(p-sulfonato phenyl) porphyrin ((TSPP)Rh) aquo and hydroxo complexes react with a series of olefins in water to form beta-hydroxyalkyl complexes. Addition reactions of (TSPP)Rh-OH to unactivated terminal alkenes invariably occur with both kinetic and thermodynamic preferences to place rhodium on the terminal carbon to form (TSPP)Rh-CH(2)CH(OH)R complexes. Acrylic and styrenic olefins initially react to place rhodium on the terminal carbon to form Rh-CH(2)CH(OH)X as the kinetically preferred isomer but subsequently proceed to an equilibrium distribution of regioisomers where Rh-CH(CH(2)OH)X is the predominant thermodynamic product. Equilibrium constants for reactions of the diaquo rhodium(III) compound ([(TSPP)Rh(III)(H(2)O)(2)](-3)) in water with a series of terminal olefins that form beta-hydroxyalkyl complexes were directly evaluated and used in deriving thermodynamic values for addition of the Rh-OH unit to olefins. The DeltaG degrees for reactions of the Rh-OH unit with olefins in water is approximately 3 kcal mol(-1) less favorable than the comparable Rh-H reactions in water. Comparisons of the regioisomers and thermodynamics for addition reactions of olefins with Rh-H and Rh-OH units in water are presented and discussed.     

Aqueous organometallic reactions of rhodium porphyrins: equilibrium thermodynamics

The reactivity and equilibrium thermodynamic studies of tetra-p-sulfonatophenyl porphyrin rhodium hydride ([(TSPP)Rh-D]-4) with CO, aldehydes and olefins that produce formyl, alpha-hydroxyalkyl and alkyl complexes have been explored in water and compared with the related reactions in non-aqueous media.     

Equilibrium thermodynamic studies in water: reactions of dihydrogen with rhodium(III) porphyrins relevant to Rh-Rh, Rh-H, and Rh-OH bond energetics

Aqueous solutions of rhodium(III) tetra p-sulfonatophenyl porphyrin ((TSPP)Rh(III)) complexes react with dihydrogen to produce equilibrium distributions between six rhodium species including rhodium hydride, rhodium(I), and rhodium(II) dimer complexes. Equilibrium thermodynamic studies (298 K) for this system establish the quantitative relationships that define the distribution of species in aqueous solution as a function of the dihydrogen and hydrogen ion concentrations through direct measurement of five equilibrium constants along with dissociation energies of D(2)O and dihydrogen in water. The hydride complex ([(TSPP)Rh-D(D(2)O)](-4)) is a weak acid (K(a)(298 K) = (8.0 +/- 0.5) x 10(-8)). Equilibrium constants and free energy changes for a series of reactions that could not be directly determined including homolysis reactions of the Rh(II)-Rh(II) dimer with water (D(2)O) and dihydrogen (D(2)) are derived from the directly measured equilibria. The rhodium hydride (Rh-D)(aq) and rhodium hydroxide (Rh-OD)(aq) bond dissociation free energies for [(TSPP)Rh-D(D(2)O)](-4) and [(TSPP)Rh-OD(D(2)O)](-4) in water are nearly equal (Rh-D = 60 +/- 3 kcal mol(-1), Rh-OD = 62 +/- 3 kcal mol(-1)). Free energy changes in aqueous media are reported for reactions that substitute hydroxide (OD(-)) (-11.9 +/- 0.1 kcal mol(-1)), hydride (D(-)) (-54.9 kcal mol(-1)), and (TSPP)Rh(I): (-7.3 +/- 0.1 kcal mol(-1)) for a water in [(TSPP)Rh(III)(D(2)O)(2)](-3) and for the rhodium hydride [(TSPP)Rh-D(D(2)O)](-4) to dissociate to produce a proton (9.7 +/- 0.1 kcal mol(-1)), a hydrogen atom (approximately 60 +/- 3 kcal mol(-1)), and a hydride (D(-)) (54.9 kcal mol(-1)) in water.     

Reactivity and equilibrium thermodynamic studies of rhodium tetrakis(3,5-disulfonatomesityl)porphyrin species with H2, CO, and olefins in water

Aqueous (D2O) solutions of tetrakis(3,5-disulfonatomesityl)porphyrin rhodium(III) aquo/hydroxo complexes ([(TMPS)Rh(III)(D2O)2]-7 (1), [(TMPS)Rh(III)(OD)(D2O)]-8 (2), and [(TMPS)Rh(III)(OD)2]-9 (3)) react with hydrogen (D2) to form an equilibrium distribution with a rhodium hydride ([(TMPS)Rh-D(D2O)]-8 (4)) and a rhodium(I) complex ([(TMPS)Rh(I)(D2O)]-9 (5)). Equilibrium constants (298 K) are measured that define the distribution for all five of these (TMPS)Rh species in this system as a function of the dihydrogen (D2) and hydrogen ion (D+) concentrations. The hydride complex [(TMPS)Rh-D(D2O)]-8 is a weak acid in D2O (Ka(298 K) = 4.3 x 10(-8)). Steric demands of the TMPS porphyrin ligand prohibit formation of a Rh(II)-Rh(II)-bonded complex, related rhodium(I)-rhodium(III) adducts, and intermolecular association of alkyl complexes which are prominent features of the rhodium tetra(p-sulfonatophenyl)porphyrin ((TSPP)Rh) system. The rhodium(II) complex ([(TMPS)Rh(II)(D2O)]-8) reacts with water to form hydride and hydroxide complexes and is not observed in D2O. The (TMPS)Rh-OD and (TMPS)Rh-D bond dissociation free energies (BDFE) are virtually equal and have a value of approximately 60 kcal mol(-1). Reactions of [(TMPS)Rh-D(D2O)]-8 in water with CO and olefins produce rhodium formyl and alkyl complexes which have equilibrium thermodynamic values comparable to the values for the corresponding substrate reactions of [(TSPP)Rh-D(D2O)]-4.     

Formation and reactivity of a porphyrin iridium hydride in water: acid dissociation constants and equilibrium thermodynamics relevant to Ir-H, Ir-OH, and Ir-CH2- bond dissociation energetics

Aqueous solutions of group nine metal(III) (M = Co, Rh, Ir) complexes of tetra(3,5-disulfonatomesityl)porphyrin [(TMPS)M(III)] form an equilibrium distribution of aquo and hydroxo complexes ([(TMPS)M(III)(D(2)O)(2-n)(OD)(n)]((7+n)-)). Evaluation of acid dissociation constants for coordinated water show that the extent of proton dissociation from water increases regularly on moving down the group from cobalt to iridium, which is consistent with the expected order of increasing metal-ligand bond strengths. Aqueous (D(2)O) solutions of [(TMPS)Ir(III)(D(2)O)(2)](7-) react with dihydrogen to form an iridium hydride complex ([(TMPS)Ir-D(D(2)O)](8-)) with an acid dissociation constant of 1.8(0.5) × 10(-12) (298 K), which is much smaller than the Rh-D derivative (4.3 (0.4) × 10(-8)), reflecting a stronger Ir-D bond. The iridium hydride complex adds with ethene and acetaldehyde to form organometallic derivatives [(TMPS)Ir-CH(2)CH(2)D(D(2)O)](8-) and [(TMPS)Ir-CH(OD)CH(3)(D(2)O)](8-). Only a six-coordinate carbonyl complex [(TMPS)Ir-D(CO)](8-) is observed for reaction of the Ir-D with CO (P(CO) = 0.2-2.0 atm), which contrasts with the (TMPS)Rh-D analog which reacts with CO to produce an equilibrium with a rhodium formyl complex ([(TMPS)Rh-CDO(D(2)O)](8-)). Reactivity studies and equilibrium thermodynamic measurements were used to discuss the relative M-X bond energetics (M = Rh, Ir; X = H, OH, and CH(2)-) and the thermodynamically favorable oxidative addition of water with the (TMPS)Ir(II) derivatives.     

Gas-phase synthesis and reactivity of the organomagnesates [CH3MgL2]- (L = Cl and O2CCH3): from ligand effects to catalysis

Multistage mass spectrometry experiments combined with density functional theory (DFT) calculations were used to examine the gas-phase synthesis and ion-molecule reactions of the organomagnesates [CH(3)MgL(2)](-) (L = Cl and O(2)CCH(3)). Neutral species containing an acidic proton (HX) react with the [CH(3)MgL(2)](-) ions via addition with concomitant elimination of methane to form [XMgL(2)](-) ions. Kinetic measurements combined with DFT calculations revealed reduced reactivity of [CH(3)Mg(O(2)CCH(3))(2)](-) toward water, caused by the bidentate binding mode of acetate, which induces overcrowding of the Mg coordination sphere. The [CH(3)MgL(2)](-) ions reacted with (i) aldehydes with enolizable protons via enolization rather than the Grignard reaction and (ii) CH(3)CO(2)H to complete a catalytic cycle for the decarboxylation of acetic acid. Other electrophilic reagents such as pivaldehyde, benzaldehyde, methyl iodide, and trimethylborate are unreactive. DFT calculations on the competition between enolization and the Grignard reaction for [CH(3)MgCl(2)](-) ions reacting with acetaldehyde suggest that while the latter has a smaller barrier, it is entropically disfavored.     

Anti-markovnikov N-H and O-H additions to electron-deficient olefins catalyzed by well-defined Cu(I) anilido, ethoxide, and phenoxide systems

The monomeric Cu(I) complexes (IPr)Cu(Z) (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene, Z = NHPh, OEt, or OPh) react with YH (Y = PhNH, PhCH2NH, EtO, or PhO) to catalytically add Y-H bonds across the C=C bond of electron-deficient olefins to yield anti-Markovnikov organic products. Catalytic activity has been observed for olefins CH2C(H)(X) with X = CN, C(O)Me, or CO2Me as well as crotononitrile. Preliminary studies implicate an intermediate in which the C-Y bond forms through a nucleophilic addition pathway.     

Hydrothermal and solid-state transformation of ruthenium-supported Keggin-type heteropolytungstates [XW11O39{Ru(II)(benzene)(H2O)}]n- (X = P (n = 5), Si (n = 6), Ge (n = 6)) to ruthenium-substituted Keggin-type heteropolytungstates

A new pathway for the preparation of mono-ruthenium (Ru)(iii)-substituted Keggin-type heteropolytungstates with an aqua ligand, [PW(11)O(39)Ru(iii)(H(2)O)](4-) (1a), [SiW(11)O(39)Ru(iii)(H(2)O)](5-) (1b) and [GeW(11)O(39)Ru(iii)(H(2)O)](5-) (1c), using [Ru(ii)(benzene)Cl(2)](2) as a Ru source was described. Compounds 1a-1c were prepared by reacting [XW(11)O(39)](n-) (X = P, Si and Ge) with [Ru(ii)(benzene)Cl(2)](2) under hydrothermal condition and were isolated as caesium salts. Ru(benzene)-supported heteropolytungstates, [PW(11)O(39){Ru(ii)(benzene)(H(2)O)}](5-) (2a), [SiW(11)O(39){Ru(ii)(benzene)(H(2)O)}](6-) (2b) and [GeW(11)O(39){Ru(ii)(benzene)(H(2)O)}](6-) (2c), were first produced in the reaction media, and then transformed to 1a, 1b and 1c, respectively, under hydrothermal conditions. Calcination of Ru(benzene)-supported heteropolytungstates, 2a, 2b and 2c, in the solid state produced mixtures of 1a, 1b and 1c with CO (carbon monoxide)-coordinated complexes, [PW(11)O(39)Ru(ii)(CO)](5-) (4a), [SiW(11)O(39)Ru(ii)(CO)](6-) (4b) and [GeW(11)O(39)Ru(ii)(CO)](6-) (4c), respectively. From comparison of their catalytic activities in water oxidation reaction, it was indicated that ruthenium should be incorporated in the heteropolytungstate in order to promote catalytic activity.     

Superoxo, peroxo, and hydroperoxo complexes formed from reactions of rhodium porphyrins with dioxygen: thermodynamics and kinetics

Rhodium(II) porphyrin complexes react with dioxygen to form terminal superoxo and bridged mu-peroxo complexes. Equilibrium constants for dioxygen complex formation with rhodium(II) tetramesitylporphyrin ((TMP)Rh*) and a m-xylyl-tethered dirhodium(II) diporphyrin complex (*Rh(m-xylyl)Rh*) are reported. (TMP)Rh-H reacts with oxygen to form a transient hydroperoxy complex ((TMP)Rh-OOH), which reacts on to form the rhodium(II) complex ((TMP)Rh*) and water. Kinetic studies for reactions of (TMP)Rh-H with O2 suggest a near concerted addition of dioxygen to the (TMP)Rh-H unit. Reactivity studies for mixtures of H2/O2 and CH4/O2 with the dirhodium(II) complex (*Rh(m-xylyl)Rh*) are reported.     

Catalysis of H(2)/D(2) scrambling and other H/D exchange processes by [Fe]-hydrogenase model complexes

Protonation of the [Fe]-hydrogenase model complex (mu-pdt)[Fe(CO)(2)(PMe(3))](2) (pdt = SCH(2)CH(2)CH(2)S) produces a species with a high field (1)H NMR resonance, isolated as the stable [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+)[PF(6)](-) salt. Structural characterization found little difference in the 2Fe2S butterfly cores, with Fe.Fe distances of 2.555(2) and 2.578(1) A for the Fe-Fe bonded neutral species and the bridging hydride species, respectively (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Yarbrough, J. C.; Darensbourg, M. Y. J. Am. Chem. Soc. 2001, 123, 9710). Both are similar to the average Fe.Fe distance found in structures of three Fe-only hydrogenase active site 2Fe2S clusters: 2.6 A. A series of similar complexes (mu-edt)-, (mu-o-xyldt)-, and (mu-SEt)(2)[Fe(CO)(2)(PMe(3))](2) (edt = SCH(2)CH(2)S; o-xyldt = SCH(2)C(6)H(4)CH(2)S), (mu-pdt)[Fe(CO)(2)(PMe(2)Ph)](2), and their protonated derivatives likewise show uniformity in the Fe-Fe bond lengths of the neutral complexes and Fe.Fe distances in the cationic bridging hydrides. The positions of the PMe(3) and PMe(2)Ph ligands are dictated by the orientation of the S-C bonds in the (mu-SRS) or (mu-SR)(2) bridges and the subsequent steric hindrance of R. The Fe(II)(mu-H)Fe(II) complexes were compared for their ability to facilitate H/D exchange reactions, as have been used as assays of H(2)ase activity. In a reaction that is promoted by light but inhibited by CO, the [(mu-H)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) complex shows H/D exchange activity with D(2), producing [(mu-D)(mu-pdt)[Fe(CO)(2)(PMe(3))](2)](+) in CH(2)Cl(2) and in acetone, but not in CH(3)CN. In the presence of light, H/D scrambling between D(2)O and H(2) is also promoted by the Fe(II)(mu-H)Fe(II) catalyst. The requirement of an open site suggests that the key step in the reactions involves D(2) or H(2) binding to Fe(II) followed by deprotonation by the internal hydride base, or by external water. As indicated by similar catalytic efficiencies of members of the series, the nature of the bridging thiolates has little influence on the reactions. Comparison to [Fe]H(2)ase enzyme active site redox levels suggests that at least one Fe(II) must be available for H(2) uptake while a reduced or an electron-rich Fe(I)Fe(I) metal-metal bonded redox level is required for proton uptake.     

Visible light promoted hydroxylation of a Si-C(sp3) bond catalyzed by rhodium porphyrins in water

Catalytic activation of an unstrained, unactivated Si-C(sp(3)) bond in water to form methane and silanol by electrophilic rhodium(III) porphyrin [(por)Rh(III)] in acidic aqueous solutions under visible light (λ ≥ 420 nm) has been developed. Activation of the Si-C(sp(3)) bond occurs through direct Si-C bond cleavage, with methyl group transfer to rhodium to give a porphyrin rhodium methyl complex. Photolysis of (por)Rh-CH(3) in water yields methyl radical and (por)Rh(II). Subsequently, (por)Rh(II) reacts with water rapidly to produce (por)Rh-H and (por)Rh-OH. (por)Rh-OH is then protonated to regenerate (por)Rh(III)-OH(2), and (por)Rh-H undergoes hydrogen atom abstraction by methyl radical to form the observed methane.     

Novel bis-acac-O,O-Ir(III) catalyst for anti-Markovnikov,hydroarylation of olefins operates by arene CH activation

A novel, thermally stable, homogeneous Ir catalyst for the anti-Markovnikov, hydroarylation of olefins is shown to operate by arene CH activation via the formation of a bisacac-O,O phenyl-Ir(III) species.     

Tris(pyrazolyl)borate carbosilane dendrimers and metallodendrimers

A modified tris(pyrazolylborate) ligand has been prepared in two steps. First, reaction of triisopropylborate with allylmagnesium bromide and further treatment with benzoyl chloride gave CH(2) = CHCH(2)B(O(i)Pr), which was then reacted with potassium pyrazolate and pyrazole to give the compound K[CH(2) = CHCH(2)Bpz(3)]. The new allyl-containing scorpionate anion of acts as a bi- or tri-dentate ligand, as shown by the mononuclear complexes [CH(2) = CHCH(2)Bpz(3)M(LL)] (M = Rh, LL = nbd, ; LL = tfb, ; LL = (CO)(PPh(3)), ; M = Ir, LL = cod, ), obtained from reactions of the chlorido-bridged dinuclear complexes [{M(mu-Cl)(LL)}(2)] with 2. Furthermore, the borate represents a key material to achieve the attachment of tris(pyrazolyl)borate groups to the peripheries of carbosilane dendrimers. Thus, the platinum-catalyzed hydrosilylation reactions of compound with the dendritic cores Si[(CH(2))(3)SiMe(2)H](4) (G(0)-(SiH)(4)), (G(1)-(SiH)(8)), and (G(2)-(SiH)(16)) gave the corresponding borate-containing dendrimers Si[(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)](4) (G(0)-B(4)), Si[(CH(2))(3)SiMe{(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)}(2)](4) (G(1)-B(8)), and Si[(CH(2))(3)SiMe{(CH(2))(3)SiMe[(CH(2))(3)SiMe(2)(CH(2))(3)B(O(i)Pr)(2)](2)}(2)](4) (G(2)-B(16)) selectively in the anti-Markovnikov direction. Further reactions of G(0)-B(4), G(1)-B(8) and G(2)-B(16) with potassium pyrazolate and pyrazole rendered the corresponding polyanionic dendrimers K(4)[Si{(CH(2))(3)SiMe(2)(CH(2))(3)Bpz(3)}(4)] (G(0)-(Bpz(3))(4)), G(1)-(Bpz(3))(8), and G(2)-(Bpz(3))(16), respectively, which contain 4, 8, and 16 tris(pyrazolyl)borate groups symmetrically located around the dendritic peripheries. These unusual polyanionic dendrimers are excellent scaffolds to support metal centres, as shown by the reactions of G(0)-(Bpz(3))(4), G(1)-(Bpz(3))(8), and G(2)-(Bpz(3))(16) with [{Rh(mu-Cl)(nbd)}(2)] to give the neutral rhodadendrimers [Si{(CH(2))(3)SiMe(2)(CH(2))(3)Bpz(3)Rh(nbd)}(4)] G(0)-(Bpz(3)Rh)(4), G(1)-(Bpz(3)Rh)(8) and G(2)-(Bpz(3)Rh)(16) as stable solids in excellent yields. Following this protocol, mixed rhodium/iridium metallodendrimers can be prepared.     

Binuclear half-sandwich cobalt(III) and rhodium(III) ortho-carboranedichalocogenolato complexes with ether chain-bridged bis(cyclopentadienyl) ligand

1, 1'-(3-Oxapentamethylene)dicyclopentadiene [O(CH(2)CH(2)C(5)H(5))(2)], containing a flexible chain-bridged group, was synthesized by the reaction of sodium cyclopentadienide with bis(2-chloroethyl) ether through a slightly modified literature procedure. Furthermore, the binuclear cobalt(III) complex O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(CO)I(2)](2) and insoluble polynuclear rhodium(III) complex {O[CH(2)CH(2)(eta(5)-C(5)H(4))RhI(2)](2)}(n) were obtained from reactions of with the corresponding metal fragments and they react easily with PPh(3) to give binuclear metal complexes, O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))I(2)](2) and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))I(2)](2), respectively. Complexes react with bidentate dilithium dichalcogenolato ortho-carborane to give eight binuclear half-sandwich ortho-carboranedichalcogenolato cobalt(III) and rhodium(III) complexes O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))](2)Co(2)(E(2)C(2)B(10)H(10)) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(E(2)C(2)B(10)H(10))](2) (E = S and Se and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se). All complexes have been characterized by elemental analyses, NMR spectra ((1)H, (13)C, (31)P and (11)B NMR) and IR spectroscopy. The molecular structures were determined by X-ray diffractometry.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

Isomerization of Aldehydes Catalyzed by Rhodium(I) Olefin Complexes

A mixture of isomeric aldehydes is formed in a catalytic isomerization of alkyl aldehydes with [C(5)Me(5)Rh(olefin)(2)] complexes. This process offers an indirect method for altering the n:iso ratio of aldehydes formed in hydroformylation reactions. For example the reaction of n-butanal with [C(5)Me(5)Rh(CH(2)=CHMe)(2)] (1) results in the formation of a bis-alkyl carbonyl rhodium complex 2 which is the resting state during the isomerization of n-butanal to a mixture of n- and iso-butanals (see scheme). In the presence of other olefins transfer formylation is observed.     

Reactivity studies of a corrole germanium hydride complex with aldehydes, olefins and alkyl halides

The tris(pentafluorophenyl) corrole germanium hydride complex (TPFC)Ge-H was prepared by the reduction of (TPFC)Ge-OCH(3) with NaBH(4). The reactivity of (TPFC)Ge-H with series of aldehydes, olefins and alkyl halides to produce α-hydroxy alkyl and alkyl complexes was studied.     

钒促铑基催化剂上合成气反应中的H2／D2同位素效应

铑基催化剂可催化合成气生成甲烷、乙醇等,CO中C—O键断裂是该反应的关键步骤。Ⅴ助剂可显著提高Rh的催化活性,其作用本质被认为是促进了CO的直接解离。本文考察了Ⅴ助剂对Rh催化性能的影响及Rh/SiO_2、Rh-V(1:1)/SiO_2上合成气反应的H_2/D_2同位素效应,根据实验结果及键级守恒-Morse势法的计算结果初步探讨了Ⅴ助剂的作用本质。     

Substitution reactions of [Ru(dppe)(CO)(H(2)O)(3)][OTf](2)

The labile nature of the coordinated water ligands in the organometallic aqua complex [Ru(dppe)(CO)(H(2)O)(3)][OTf](2) (1) (dppe = Ph(2)PCH(2)CH(2)PPh(2); OTf = OSO(2)CF(3)) has been investigated through substitution reactions with a range of incoming ligands. Dissolution of 1 in acetonitrile or dimethyl sulfoxide results in the facile displacement of all three waters to give [Ru(dppe)(CO)(CH(3)CN)(3)][OTf](2) (2) and [Ru(dppe)(CO)(DMSO)(3)][OTf](2) (3), respectively. Similarly, 1 reacts with Me(3)CNC to afford [Ru(dppe)(CO)(CNCMe(3))(3)][OTf](2) (4). Addition of 1 equiv of 2,2'-bipyridyl (bpy) or 4,4'-dimethyl-2,2'-bipyridyl (Me(2)bpy) to acetone/water solutions of 1 initially yields [Ru(dppe)(CO)(H(2)O)(bpy)][OTf](2) (5a) and [Ru(dppe)(CO)(H(2)O)(Me(2)bpy)][OTf](2) (6a), in which the coordinated water lies trans to CO. Compounds 5a and 6a rapidly rearrange to isomeric species (5b, 6b) in which the ligated water is trans to dppe. Further reactivity has been demonstrated for 6b, which, upon dissolution in CDCl(3), loses water and coordinates a triflate anion to afford [Ru(dppe)(CO)(OTf)(Me(2)bpy)][OTf] (7). Reaction of 1 with CH(3)CH(2)CH(2)SH gives the dinuclear bridging thiolate complex [[(dppe)Ru(CO)](2)(mu-SCH(2)CH(2)CH(3))(3)][OTf] (8). The reaction of 1 with CO in acetone/water is slow and yields the cationic hydride complex [Ru(dppe)(CO)(3)H][OTf] (9) via a water gas shift reaction. Moreover, the same mechanism can also be used to account for the previously reported synthesis of 1 upon reaction of Ru(dppe)(CO)(2)(OTf)(2) with water (Organometallics 1999, 18, 4068).     

Ruthenium-catalyzed oxidative cleavage of olefins to aldehydes.

Three oxidation protocols have been developed to cleave olefins to carbonyl compounds with ruthenium trichloride as catalyst (3.5 mol %). These methods convert olefins that are not fully substituted to aldehydes rather than carboxylic acids. While aryl olefins were cleaved to aromatic aldehydes in excellent yields by using the system of RuCl3-Oxone-NaHCO3 in CH3CN-H2O (1.5:1), aliphatic olefins were converted into alkyl aldehydes with RuCl3-NaIO4 in 1,2-dichloroethane-H2O (1:1) in good to excellent yields. It is noteworthy that terminal aliphatic olefins were cleaved to the corresponding aldehydes in excellent yields by using RuCl3-NaIO4 in CH3CN-H2O (6:1).