Hyperbranched polymers with maleic functional groups as radical crosslinkers

The crosslinking performance of the unsaturated hyperbranched polyester poly(allyloxy maleic acid‐co‐maleic anhydride) (MAHP) was investigated with copolymerizations of three different monomers: styrene, vinyl acetate, and methyl methacrylate. Both styrene and vinyl acetate afforded interpenetrating‐polymer‐network copolymer gels. The gels exhibited crosslink density gradients through the polymer matrices on a macroscopic level, and density maximums were concentrated around the MAHP moieties. The heterogeneity of the gels is briefly discussed in terms of a modified two‐phase model, where one phase consists of an elastic part of low crosslinking density and the other phase consists of an inelastic dendritic part with a highly condensed bond density. Unlike the two‐phase model developed by Choquet and Rietsch, the modified two‐phase model takes into account that both phases swell in good solvents. Unlike copolymerizations employing styrene or vinyl acetate, the copolymerization of MAHP with methyl methacrylate afforded noncrosslinked starbranched copolymers that consisted of a MAHP core from which long poly(methyl methacrylate) branches were protruding. The different behaviors of the copolymerizations of the three monomers used in this study can rationally be explained by their different reactivity ratios with maleic end groups of MAHP. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 964–972, 2001     

Synthesis and crosslinking of hyperbranched poly(n‐nonyl acrylate) to form organogels

(2‐Bromo‐n‐nonan‐1‐oxycarbonyl)ethyl acrylate was synthesized as an inimer for self‐condensing vinyl polymerization (SCVP) to produce hyperbranched poly(n‐nonyl acrylate), either as a homopolymer or as a copolymer with n‐nonyl acrylate. The inimer was homopolymerized and copolymerized by atom transfer radical polymerization (ATRP) and activator generated by electron transfer ATRP to produce soluble polymers with broad polydispersities (up to ? = 9.91), which is characteristic of hyperbranched polymers produced by SCVP. The resulting hyperbranched (co)polymers were crosslinked by atom transfer radical coupling in both one‐pot and two‐step procedures. The radical–radical crosslinking reaction is extremely efficient, resulting in hard plastic particles from the homopolymer of (2‐bromo‐n‐nonan‐1‐oxycarbonyl)ethyl acrylate synthesized in bulk. Crosslinked organogels that swell in tetrahydrofuran were formed when the rate of crosslinking decreased using acetonitrile solutions. Dynamic shear and stress relaxation experiments demonstrated that the dry network behaves as a covalently crosslinked soft gel, with a glass transition at ?50 °C according to differential scanning calorimetry. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2399–2410     

Controlling the formation of long‐subchain hyperbranched polystyrene from seesaw‐type AB2 macromonomers: Solvent polarity and solubility

Through atom transfer radical polymerization of styrene with 1,3‐dibromomethyl‐5‐propargyloxy‐benzene as initiator followed by the conversion of bromine end‐groups into azide end‐groups, well‐defined seesaw‐type polystyrene (PSt) macromonomers with two molecular weights (M_n = 8.0 and 28.0 k) were obtained. Thus, a series of long‐subchain hyperbranched (lsc‐hp) PSt with high overall molar masses and regular subchain lengths were obtained via copper‐catalyzed azide–alkyne cycloaddition click chemistry performed in THF and DMF, respectively. The polycondensation of seesaw‐type macromonomers was monitored by gel permeation chromatography. Because DMF is the reaction medium with higher polarity, click reaction proceeds more easily in DMF. Therefore, the growth of lsc‐hp PSt in DMF has faster rate than that in THF for the shorter seesaw‐type macromonomer (Seesaw‐8k). However, THF is the solvent with better solubility to PSt and leads to looser conformation of PSt chains. Thus, for the longer seesaw macromonomer (Seesaw‐28k), lsc‐hp PSt in THF has higher overall molar mass. As well, the self‐cyclization of seesaw‐type macromonomers also depends on both solvent and molar mass of macromonomer. The self‐cyclization degrees of Seesaw‐8k in DMF and THF are almost the same while that of Seesaw‐28k macromonomer is obviously lower in THF. The experimental results suggest a physical consideration to control the growth of hyperbranched polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Shape‐memory effect in hyperbranched poly(ethyleneimine)‐modified epoxy thermosets

A series of shape‐memory epoxy thermosets were synthesized by crosslinking diglycidyl ether of bisphenol A with mixtures of commercially available hyperbranched poly(ethyleneimine) and polyetheramine. Thermal, mechanical and shape‐memory properties were studied and the effect on them of the content and structure of the hyperbranched polymer was discussed. Measurements showed that the glass transition temperature can be tailored from 60 °C to 117 °C depending on the hyperbranched polymer content, and all formulations showed an appropriate glassy/rubbery storage modulus ratio. Shape‐memory programming was carried out at TgE′ given the excellent mechanical properties of the materials, with maximum stress and failure strain up to 15 MPa and 60%, respectively. The resulting shape‐memory behavior was excellent, with maximum shape recovery and shape fixity of 98% as well as a fast shape‐recovery rate of 22%/min. The results show that hyperbranched poly(ethyleneimine) as a crosslinking agent can be used to enhance mechanical and shape‐memory properties with different effects depending on the crosslinking density. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 924–933     

Degradable and chemically recyclable epoxy resins containing acetal linkages: Synthesis,properties, and application for carbon fiber‐reinforced plastics

Four sorts of epoxy resins containing degradable acetal linkages were synthesized by the reaction of bisphenol A (BA) or cresol novolak (CN) resin with vinyl ethers containing a glycidyl group [4‐vinlyoxybutyl glycidyl ether (VBGE) and cyclohexane dimethanol vinyl glycidyl ether (CHDMVG)] and cured with known typical amine‐curing agents. The thermal and mechanical properties of the cured resins were investigated. Among the four cured epoxy resins, the CN‐CHDMVG resin (derived from CN and CHDMVE) exhibited relatively high glass transition temperature (T_g = ca. 110 °C). The treatment of these cured epoxy resins with aqueous HCl in tetrahydrofuran (THF) at room temperature for 12 h generated BA and CN as degradation main products in high yield. Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating the laminated prepreg sheets with BA‐CHDMVG (derived from BA and CHDMVE) and CN‐CHDMVG, in which strands of carbon fibers are impregnated with the epoxy resins containing conventional curing agents and curing accelerators. The obtained CFRPs showed good appearance and underwent smooth breakdown with the aqueous acid treatment in THF at room temperature for 24 h to produce strands of carbon fiber without damaging their surface conditions and tensile strength. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Membrane preparation from hyperbranched perfluorinated polymers

In this research, membrane formation with hyperbranched perfluorinated polymers (HBFP) was investigated. To create a tough membrane, HBFP was blended and crosslinked with a tougher linear polymer. Blending only or crosslinking only was not sufficient to create a tough membrane, but combining blending with crosslinking was successful. Miscibility, phase separation, and thermal and mechanical properties were evaluated for a variety of systems. By using a toughening linear polymer with lower polarity, reduced phase separation and improved mechanical properties were seen. Overall, imidazole‐containing HBFPs produced the clearest and toughest blends. These new hyperbranched ionomers and copolymers are strong candidates for future use in anhydrous proton exchange membranes. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 961–972     

Synthesis of Conjugated Hyperbranched Polytriazoles Containing Truxene Units by Click Polymerization

It has been a challenge to synthesize high molecular weight and soluble conjugated hyperbranched poly(1,2,3‐triazole)s (hb‐PTAs). In this paper a series of soluble hyperbranched polytriazoles, whose number‐average molecular weight (M_n) and polydispersity index ranged in (1.2–3.3)×10⁴ and 1.7–3.0, respectively, were synthesized with A₂+B₃ approach. In the polymerization process, diazides A1 – A4 and triyne B1 were used as A₂ and B₃ monomers; Cu(I)‐catalyst, THF and water were used as their reaction system. At room temperature the final molecular weight could be controlled through reaction time, so finally we obtained soluble conjugated hyperbranched poly(1,2,3‐triazole)s hb‐PTAs (1–4 ). The polymers were soluble in common organic solvents, and all emitted blue light; the films of polymers emitted yellow and blue light, due to the difference in the aggregation of their chromophoric units in the solid state. The thermal properties of the final copolymers were analyzed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA).     

Synthesis of novel hyperbranched polymers featuring oxazoline linear units and their application in fast‐drying solvent‐borne coating formulations

Novel acid‐terminated hyperbranched polymers (HBPs) containing adipic acid and oxazoline monomers derived from oleic and linoleic acid have been synthesized via a bulk polymerization procedure. Branching was achieved as a consequence of an acid‐catalyzed opening of the oxazoline ring to produce a trifunctional monomer in situ which delivered branching levels of >45% as determined by ¹H and ¹³C NMR spectroscopy. The HBPs were soluble in common solvents, such as CHCl₃, acetone, tetrahydrofuran, dimethylformamide, and dimethyl sulfoxide and were further functionalized by addition of citronellol to afford white‐spirit soluble materials that could be used in coating formulations. During end group modification, a reduction in branching levels of the HBPs (down to 12–24%) was observed, predominantly on account of oxazoline ring reformation and trans‐esterification processes under the reaction conditions used. In comparison to commercial alkyd resin paint coatings, formulations of the citronellol‐functionalized hyperbranched materials blended with a commercial alkyd resin exhibited dramatic decreases of the blend viscosity when the HBP content was increased. The curing characteristics of the HBP/alkyd blend formulations were studied by dynamic mechanical analysis which revealed that the new coatings cured more quickly and produced tougher materials than otherwise identical coatings prepared from only the commercial alkyd resins. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3964–3974     

Polyethersulfone‐epoxy terminated materials as thermosetting resins for microelectronic devices

A totally aromatic polyether/sulfone resin (PES‐E) was synthesized and tested as an insulating glue in the construction of a Chip‐on‐Chip (CoC) device. PES‐E, essentially constituted of open‐chain macromolecules of low molecular mass (M _n of about 3000 Da) with hydroxy and/or epoxy end‐groups, has a glass transition temperature of about 150 °C and is subject to crosslinking at temperatures higher than 320 °C. A CoC device was assembled using a five‐step process by interposing a layer of PES‐E between two chips. After curing, SEM cross section images showed a homogeneous crosslinked resin layer well stuck (flick and shear tests) to both chips. The chemical structure of the chains and the hydroxy/epoxy end‐groups ratio were optimized to obtain a crosslinked material with good adhesion and sufficient flexibility to avoid cracking during assembly and use. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5682–5689, 2009     

Synthesis of a new hyperbranched‐linear‐hyperbranched triblock copolymer and its use as a chemical modifier for the cationic photo and thermal curing of epoxy resins

A new hyperbranched‐linear‐hyperbranched polymer was prepared in a one pot process by reaction of 4,4‐bis(4‐hydroxyphenyl)valeric acid and poly(ethylene glycol) (HPH). After characterization by ¹H and ¹³C NMR, SEC, DSC, and TGA, this polymer was used, in proportions of 5, 10, and 15 phr, as a chemical modifier in the UV and thermal cationic curing of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexyl carboxylate epoxy resin. The curing process was studied by calorimetry, demonstrating the accelerating effect of the hydroxyl groups present in HPH's structure. The morphology of the resulting thermosets depended on the curing system used, as demonstrated by FE‐SEM microscopy, but in both cases phase separation occurred. Thermosets obtained by thermal curing presented lower thermal stability than UV‐cured materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of hyperbranched poly(ether nitrile)s by one‐step polycondensation of an AB2 monomer

Hyperbranched poly(ether nitrile)s were prepared from a novel AB₂ type monomer, 2‐chloro‐4‐(3,5‐dihydroxyphenoxy)benzonitrile, via nucleophilic aromatic substitution. Soluble and low‐viscous hyperbranched polymers with molecular weights upto 233,600 (M_w) were isolated. According to the ¹H NMR and GPC data, the unique polymerization behavior was observed, which implies that the weight average molecular weight increased after the number average molecular weight reached plateau region. Model compounds were prepared to characterize the branching structure. Spectroscopic measurements of the model compounds and the resulting polymers, such as ¹H, DEPT ¹³C NMR, and MS, strongly suggest that the ether exchange reaction and cyclization are involved in the propagation reaction. The side reactions would affect the unique polymerization behavior. The resulting polymers showed a good solubility in organic solvents similar to other hyperbranched aromatic polymers. The hydroxy‐terminated polymer was even soluble in basic water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5835–5844, 2009     

Solid polymer electrolytes I,preparation, characterization,and ionic conductivity of gelled polymer electrolytes based on novel crosslinked siloxane/poly(ethylene glycol) polymers

A series of crosslinked siloxane/poly(ethylene glycol) (Si–PEG) copolymers were synthesized from the reactive methoxy‐functional silicone resin (Si resin) and PEGs with different molecular weights via two kinds of crosslinking reactions during an in situ curing stage. One of the crosslinking reactions is the self‐condensation between two methoxy groups in the Si resin, and another one is an alkoxy‐exchange reaction between the methoxy group in the Si resin and the OH group in PEG. The synthesized crosslinked copolymers were characterized by Fourier transform infrared spectroscopy, DSC, and ¹³C NMR. The crosslinked copolymers were stable in a moisture‐free environment, but the Si? O? C linkages were hydrolyzed in humid conditions. The gel‐like solid polymer electrolytes (SPEs) were prepared by impregnating these crosslinked Si–PEG copolymers in a propylene carbonate (LiClO₄/PC) solution. The highest conductivity reached 2.4 × 10^?4 S cm^?1 at 25 °C and increased to 8.7 × 10^?4 S cm^?1 at 85 °C. The conductivities of these gel‐type SPEs were affected by the content of LiClO₄/PC, the molecular weights of PEGs, and the weight fraction of the Si resin. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2051–2059, 2004     

Hyperbranched polyalkenylsilanes by hydrosilylation with platinum catalysts. I. Polymerization

Hyperbranched polycarbosilanes were synthesized by hydrosilylation addition of methyldivinylsilane, methyldiallylsilane, triallylsilane, and methyldiundecenylsilane. Molecular mass distributions of the hyperbranched polymers were investigated upon systematic variation of the reaction conditions. The formation of hyperbranched polycarbosilanes depended strongly on the reaction conditions and the monomer structure. Although cyclization reactions impeded the build up of molecular weight, crosslinking due to rearrangement reactions caused the formation of multimodal molecular weight distributions and gelation. Crosslinking could be avoided by the appropriate choice of the reaction conditions. In the case of methyldiundecenylsilane, where the distance between the double bond and silicon atom essentially was enlarged, high molecular weight polymers with remarkably narrow molecular weight distributions were obtained; the molecular mass could be controlled by subsequent addition of further monomer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 741–751, 2000     

Solvent replacement to thermo‐responsive nanoparticles from long‐subchain hyperbranched PSt grafted with PNIPAM for encapsulation

Long‐subchain hyperbranched polystyrene (lsc‐hp PSt) with uniform subchain length was obtained through copper‐catalyzed azide‐alkyne cycloaddition click chemistry from seesaw macromonomer of PSt having one alkynyl group anchored at the chain centre and two azido group attached to both chain ends [alkynyl‐(PSt‐N₃)₂]. After precipitation fraction, different portions of lsc‐hp PSt having narrow overall molecular weight distribution were obtained for further grafting with alkynyl‐capped poly(N‐isopropylacrylamide) (alkynyl‐PNIPAM), which was obtained via single‐electron transfer living radical polymerization of NIPAM with propargyl 2‐bromoisobutyrate as the initiator and grafted onto the peripheral azido groups of lsc‐hp PSt via click chemistry. Thus, amphiphilic lsc‐hp PSt grafted with PNIPAM chains (lsc‐hp PSt‐g‐PNIPAM) was obtained and would have star‐like conformation in tetrahydrofuran (THF). By replacing THF with water, lsc‐hp PSt‐g‐PNIPAM was dissolved at molecular level in aqueous solution due to the hydrophilicity of PNIPAM and exhibited thermal induced shrinkage of PNIPAM arms. The water‐insoluble lsc‐hp PSt would collapse densely and could be served as a reservoir to absorb hydrophobic chemicals in aqueous solution. The influence of overall molecular weight of lsc‐hp PSt on the absorption of pyrene was studied. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s from A2 + B3 approach in poly(phosphoric acid)

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s (HPEKs) were prepared from “A₂ + B₃” approach by using different monomer solubility in reaction medium. 1,3,5‐Triphenoxybenzene as a hydrophobic B₃ monomer was reacted with commercially available terephthalic acid or 4,4′‐oxybis(benzoic acid) as a hydrophilic A₂ monomer in a hydrophilic reaction medium, polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅). The resultant HPEKs were soluble in various common organic solvents and had the weight‐average molecular weight in the range of 3900–13,400 g/mol. The results implied that HPEKs were branched structures instead of crosslinked polymers. The molecular sizes and shapes of HPEKs were further assured by morphological investigation with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hence, the applied polymerization condition was indeed strong enough to efficiently facilitate polycondensation via “direct” Friedel‐Crafts reaction without gelation. It could be concluded that the polymer forming reaction was kinetically controlled by automatic and slow feeding of the hydrophobic B₃ monomer into the hydrophilic reaction mixture containing hydrophilic comonomer. As a result, hyperbranched structures were formed instead of crosslinked polymers even at full conversion (equifunctional monomer feed ratio). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3326–3336, 2009     

Extension of the chain‐end,free‐volume theory for predicting glass temperature as a function of conversion in hyperbranched polymers obtained through one‐pot approaches

Compared with linear polymers, more factors may affect the glass‐transition temperature (T_g) of a hyperbranched structure, for instance, the contents of end groups, the chemical properties of end groups, branching junctions, and the compactness of a hyperbranched structure. T_g's decrease with increasing content of end‐group free volumes, whereas they increase with increasing polarity of end groups, junction density, or compactness of a hyperbranched structure. However, end‐group free volumes are often a prevailing factor according to the literature. In this work, chain‐end, free‐volume theory was extended for predicting the relations of T_g to conversion (X) and molecular weight (M) in hyperbranched polymers obtained through one‐pot approaches of either polycondensation or self‐condensing vinyl polymerization. The theoretical relations of polymerization degrees to monomer conversions in developing processes of hyperbranched structures reported in the literature were applied in the extended model, and some interesting results were obtained. T_g's of hyperbranched polymers showed a nonlinear relation to reciprocal molecular weight, which differed from the linear relation observed in linear polymers. T_g values decreased with increasing molecular weight in the low‐molecular‐weight range; however, they increased with increasing molecular weight in the high‐molecular‐weight range. T_g values decreased with increasing log M and then turned to a constant value in the high‐molecular‐weight range. The plot of T_g versus 1/M or log M for hyperbranched polymers may exhibit intersecting straight‐line behaviors. The intersection or transition does not result from entanglements that account for such intersections in linear polymers but from a nonlinear feature in hyperbranched polymers according to chain‐end, free‐volume theory. However, the conclusions obtained in this work cannot be extended to dendrimers because after the third generation, the end‐group extents of a dendrimer decrease with molecular weight. Thus, it is very possible for a dendrimer that T_g increases with 1/M before the third generation; however, it decreases with 1/M after the third generation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1235–1242, 2004     

Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Influence of the type of epoxy hardener on the structure and properties of interpenetrated vinyl ester/epoxy resins

The morphology–toughness relationship of vinyl ester/cycloaliphatic epoxy hybrid resins of interpenetrating network (IPN) structures was studied as a function of the epoxy hardening. The epoxy was crosslinked via polyaddition reactions (with aliphatic and cycloaliphatic diamines), cationic homopolymerization (via a boron trifluoride complex), and maleic anhydride. Maleic anhydride worked as a dual‐phase crosslinking agent by favoring the formation of a grafted IPN structure between the vinyl ester and epoxy. The type of epoxy hardener strongly affected the IPN morphology and toughness. The toughness was assessed by linear elastic fracture mechanics, which determined the fracture toughness and energy. The more compact the IPN structure was, the lower the fracture energy was of the interpenetrated vinyl ester/epoxy formulations. This resulted in the following toughness ranking: aliphatic diamine > cycloaliphatic diamine ≥ boron trifluoride complex > maleic anhydride. For IPN characterization, the width of the entangling bands and the surface roughness parameters were considered. Their values were deduced from atomic force microscopy scans taken on ion‐etched surfaces. More compact, less rough IPN‐structured resins possessed lower toughness parameters than less compact, rougher structured ones. The latter were less compatible according to dynamic mechanical thermal and thermogravimetric analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5471–5481, 2004     

Influence of the Nature of Crosslinking Agent on the Oxidation Behavior of Crosslinked Polystyrene‐Supported Polyoxyethylene Bound Permanganate

Abstract

Polystyrene‐supported polyoxyethylene (PSPOE) bound permanganate with varying crosslinking agents have been prepared and used as a new class of recyclable oxidizing agents for low molecular weight alcohols and aldehydes. The effect of the nature of crosslinking agents on the oxidation reactions was studied in detail. The crosslinking agents used were ethyleneglycol dimethacrylate (EGDMA), 1,4‐butanediol dimethacrylate (BDDMA), and 1,6‐hexanediol diacrylate (HDODA). Polymer supports were synthesized by free radical suspension polymerization. Chloromethylation was done using the Friedel‐Crafts reaction. A cyclic polyether type compound was developed by the reaction of functionlized resin with polyethylene glycol (PEG₆₀₀) and sodium. Polystyrene‐supported polyoxyethylene was equilibrated with potassium permanganate in benzene to give the oxidizing agent. The results reveal that the reactivity of HDODA‐crosslinked system shows higher reactivity than the BDDMA, and EGDMA‐crosslinked systems. This is due to higher flexibility of the HDODA‐crosslinked system compared to the BDDMA, and EGDMA‐crosslinked systems. The effect of solvent, temperature, and molar concentration of the reagent on oxidation were carried out using benzoin to benzil as the model reaction. For a less flexibile EGDMA‐crosslinked resin, tetrahydrofuran (THF) is the best solvent, for BDDMA‐crosslinked system dioxane and for the highly flexible HDODA‐crosslinked system CHCl₃ is found to be best. In all cases, the reactivity of the reagent increased with an increase in temperature and molar excess of the reagent.     

Complex amphiphilic networks derived from diamine‐terminated poly(ethylene glycol) and benzylic chloride‐functionalized hyperbranched fluoropolymers

Amphiphilic copolymer networks were prepared from hyperbranched fluoropolymer (HBFP*, M_n = 38 kDa, by atom transfer radical‐self condensing vinyl copolymerization) and linear diamine‐terminated poly(ethylene glycol) (DA‐PEG, M_n = 1,630 Da). Model studies found that the crosslinking mechanism occurred at ambient temperature as a result of reaction between DA‐PEG and the benzylic chlorides of HBFP*. These networks underwent covalent attachment to glass microscope slides derivatized with 3‐aminopropyltriethoxysilane, whereupon gel percent studies at various weight percentages of DA‐PEG to HBFP* found that curing could be achieved at lower temperatures and shortened time periods relative to the previously reported parent HBFP–PEG system. Thermogravimetric analysis revealed that the crosslinked materials gave no evident mass loss up to 250 °C. Differential scanning calorimetry of the complex amphiphilic networks showed a suppressed glass transition temperature, relative to that observed for neat HBFP*, and multiple melting DA‐PEG endotherm(s) near 30 °C. The films possessed a topographically‐complex surface with features that increased in tandem with an increase in the ratio of DA‐PEG to HBFP*, as detected by atomic force microscopy and quantified by increased rms roughness values. Internal reflection infrared imaging revealed a heterogeneous surface composition and confirmed that the domain sizes increased as the weight percent of DA‐PEG increased. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4782–4794, 2006