Catalytic Activity of WO<Subscript>3</Subscript> and MoO<Subscript>3</Subscript> with Pt and Pd Additives in Oxidation of Hydrogen

We have shown that WO₃ and MoO₃ with Pt or Pd additives exhibit high catalytic activity in the reaction of H₂ oxidation. In the temperature range 313 K to 353 K, we have studied the kinetic behavior of the reaction on 0.1 mass % Pt(Pd)/WO₃ and Pt(Pd)/MoO₃ samples. We have established that the kinetics of H₂ oxidation on these catalysts correspond to an Eley - Rideal mechanism. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 313–316, September–October, 2005.     

Oxidation of hydrogen on previously reduced Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> with Pt and Pd additives

X-ray photoelectron spectroscopy (XPS) was used to establish that the surface layer of catalysts obtained by the reduction of Ta₂O₅ with added Pt and Pd by hydrogen contains nonstoichiometric oxides TaO_x, which enhance the activity of the catalyst. A study of the hydrogen oxidation kinetics showed that the kinetic relationships are described satisfactorily by the Eley-Riedel mechanism, according to which the reaction occurs by an interaction of hydrogen from the gas phase with adsorbed oxygen. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 44, No. 4, pp. 254–258, July–August, 2008.     

Properties of the surface layer and catalytic activity of Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> with Pt or Pd additives in the oxidation of hydrogen

The catalytic activity in the oxidation of hydrogen (in the gaseous state in the presence of excess oxygen) has been studied for samples of Pt(Pd)/Ta₂O_5−x, formed by reduction with hydrogen. The samples obtained had greater activity than the traditional catalysts Pt(Pd)/Al₂O₃. According to X-ray diffraction analysis and electron microscopic studies, Ta₂O_5−x becomes amorphous with the formation of more reduced non-stoichiometric oxygen-deficient tantalum oxides with a surface layer of catalyst. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 44, No. 3, pp. 180–185, May–June, 2008.     

Synthesis,characterization, and catalytic activity in the <Emphasis Type="Italic">n</Emphasis>-heptane conversion over Pt/In–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> sol–gel prepared catalysts

Platinum catalysts supported on indium-doped alumina were prepared by the sol–gel method. The method allows the incorporation of In³⁺ in the alumina network. The indium-doped alumina supports showed narrow pore size distribution (5.4–4.0 nm) and high specific surface areas (258–280 m²/g). The ²⁷Al NMR-MAS spectroscopy identified aluminum in tetrahedral, pentahedral, and octahedral coordination; however, the intensity of the signal assigned to aluminum in pentahedral coordination diminishes with the increase of the content of indium. Total acidity determined by ammonia thermodesorption diminishes strongly in Pt/In–Al₂O₃ catalysts, suggesting a selective deposit of platinum over the acid sites of the support. The effect of the support in the platinum catalytic activity was evaluated in the n-heptane dehydrocyclization reaction. The selectivity patterns for such reaction were modified substantially in the doped Pt/In–Al₂O₃ catalysts, in comparison with the Pt-In/Al₂O₃–I coimpregnated reference catalyst. As an important result, the formation of benzene was suppressed totally over the indium-doped alumina sol–gel supports with a high content (3 wt%) of indium.     

Preparation of Pd(PPh<Subscript>2</Subscript>H)<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>2</Subscript> and its Role as a Precursor of a Dinuclear Complex with Bridging Phosphide Ligands

Reaction of PPh₂H with Pd(PPh₃)₄ in a 4:1 molar ratio produced the Pd complex with two diphenylphosphine ligands, Pd(PPh₂H)₂(PPh₃)₂ (1). Complex (1) was characterized by n.m.r. (¹H and ³¹P{¹H}) spectra as well as by elemental analysis. Reaction of (1) with RhCl(PPh₃)₃ yielded a Pd–Rh heterobimetallic complex with bridging phosphide ligands, formulated as [(Ph₃P)₂Pd(μ-PPh₂)₂Rh(PPh₃)₂]Cl (2).     

Studies on the copolymerization of norbornene with CO catalyzed by a new catalytic system PdCl<Subscript>2</Subscript>/phen/M(CF<Subscript>3</Subscript>SO<Subscript>3</Subscript>)<Subscript>n</Subscript>

A new three-component catalytic system, PdCl₂/phen/M(CF₃SO₃)_n where M = La, Y, Yb, Zn, and Cu, was studied for the copolymerization of norbornene (NBE) with CO to prepare polyketone (PK). It was found that the CF₃SO₃H catalytic system gave a low catalytic activity for the copolymerization of norbornene with CO, but when M(CF₃SO₃)_n was introduced instead of CF₃SO₃H, the PdCl₂/phen/M(CF₃SO₃)_n catalytic system exhibited much higher activity. The effects of ligands, M(CF₃SO₃)_n, solvents, and temperatures on the copolymerization have been discussed in detail. The results showed that with 1,10-phenanthroline (phen) and Cu(CF₃SO₃)₂ used as cocatalysts, the corresponding reaction rate reached 82 000 g PK (mol Pd)⁻¹h⁻¹ when the reaction was carried out in methanol at 90°C and 3.0 MPa of CO, and the weight average molecular weight (M _w) of the resultant copolymer is 1090 g/mol. The copolymer was characterized with various techniques such as FT-IR, ¹HNMR, ¹³CNMR, TGA, and DSC. The infrared spectrum of the product includes two features at 1697 and 1732 cm⁻¹ for the NBE/CO copolymer in CH₃OH that are attributed to carbonyl groups in ketones (repeating unit) and esters (end group), respectively. Due to the tension of the ring of norbornene, the degree of copolymerization is not high. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 1, pp. 51–58. This article was submitted by the authors in English.     

Synthesis,Structure and Isomerism of the [Fe<Subscript>3</Subscript>Pt(μ<Subscript>4</Subscript>-Q)(CO)<Subscript>9</Subscript>(dppm)] Clusters (Q = Se,Te; dppm = Ph<Subscript>2</Subscript>PCH<Subscript>2</Subscript>PPh<Subscript>2</Subscript>)

The reaction of K₂[Fe₃(μ₃-Q)(CO)₉] (Q = Se (K₂[1a]), Te (K₂[1b])) with [(dppm)PtCl₂] leads to the addition of a [(dppm)Pt]²⁺ unit to a Fe₂Q face of the initial cluster. By this way new heteronuclear clusters [Fe₃Pt(μ₃-Q)(CO)₉(dppm)] were obtained possessing a butterfly-shaped cluster core bridged by a μ₄-Q unit. It has been found that the resulting Fe-Pt clusters exist as equilibrium mixtures of two isomeric forms in solution differing by the dppm coordination mode: as a chelate ligand coordinated to Pt or as a bridging ligand coordinated to Pt and Fe atoms. The mixtures of isomers can be separated by chromatography and the pure isomers can be isolated as stable crystalline phases. Solutions of both isomers attain equilibrium at normal conditions in about 1 month as found by NMR. Dedicated to Professor Dieter Fenske in the occasion of his 65th birthday.     

XAFS investigation of [Pd(NH<Subscript>3</Subscript>)<Subscript>4</Subscript>][AuCl<Subscript>4</Subscript>]<Subscript>2</Subscript> and its thermolysis products

Thermolysis of double complex salt [Pd(NH₃)₄][AuCl₄]₂ has been studied in helium atmosphere from ambient to 350 °C. The XAFS of Pd K and Au L₃ edges and thermogravimetry measurements have been carried out to characterize the intermediates and the final product. In the temperature range 115–160 °C the complex is decomposed to form Pd(NH₃)₂Cl₂ and AuCl_4−x N _x species with x ranging from 2 to 3. Subsequent heating of the intermediate up to 300 °C leads to the total loss of NH₃. The Au–Cl and Au–Au bonds form the local environment of Au at the stage of decomposition while only four chlorine atoms are around Pd. At the temperature of 330 °C the Au and Pd nanoparticles as well as residues of palladium chloride are detected. The final product consists of separated Au and Pd nanoparticles.     

Accessing HgSe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>S<Subscript><Emphasis Type="Italic">1−x</Emphasis></Subscript> Nanoparticles Using the Single-Source Reagent Me<Subscript>3</Subscript>Si–SeS–SiMe<Subscript>3</Subscript>

Mercury-selenosulfide (HgSe _x S _1-x ) nanoparticles have been synthesized using the single-source reagent Me₃Si–SeS–SiMe₃. The reagent distributes Se²⁻ and S²⁻ to the metal core as the reaction between Me₃Si–SeS–SiMe₃ and mercury acetate occurs via a redox pathway, ultimately giving rise to Se–S bond cleavage. Particles are characterized by EDX, TEM and powder X-ray diffraction analysis in conjunction with UV–Visible absorption spectroscopy. Dedicated to Prof. Dr. Dieter Fenske on the occasion of his 65th birthday.     

Pyridyl derivatives provide new pathways for labeling protein with fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript>

The purpose of this work was to indirect label IgG with fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and to check the radiochemical behavior of the labeled product. The compound of (bis(2-pyridylmethyl)-amino)-acetic acid (L²H) was synthesized and labeled with fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺. The labeling yield of ¹⁸⁸Re(CO)₃–L²H was more than 90%. The effects of protein concentration, reaction time, pH and reaction temperature of labeling of IgG with ¹⁸⁸Re(CO)₃–L²H were investigated. The conjugation conditions were optimized. The labeled product was analyzed by size exclusion HPLC and TLC. The stability of ¹⁸⁸Re(CO)₃–L²H–IgG in vitro was high. The results of this study may be useful for [¹⁸⁸Re(CO)₃(H₂O)₃]⁺ labeling of protein for radioimmunotherapy.     

Computational study on the reaction of CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>CH<Subscript>3</Subscript> with OH radical: mechanism and enthalpy of formation

The reaction mechanism of CH₃SCH₂CH₃ with OH radical is studied at the CCSD(T)/6-311+G(3df,p)//MP2/6-31+G(2d,p) level of theory. Three hydrogen abstraction channels, one substitution process and five addition–elimination channels are identified in the title reaction. The result shows hydrogen abstraction is dominant. Substitution process and addition–elimination reactions may be negligible because of the high barrier heights. Enthalpies of formation [ \Updelta_f H_{(298.15\textK)}^o \Updelta_{f} H_{(298.15{\text{K}})}^{o} ] of the reactants and products are evaluated at the CBS-QB3, G3 and G3MP2 levels of theory, respectively. It is found that the calculated enthalpies of formation by the aforementioned three methods are in consistent with the available experimental data. Rate constants and branching ratios are estimated by means of the conventional transition state theory with the Wigner tunneling correction over the temperature range of 200–900 K. The calculation shows that the formations of P1 (CH₂SCH₂CH₃ + H₂O) and P2 (CH₃SCHCH₃ + H₂O) are major products during 200–900 K. The three-parameter expressions for the total rate constant is fitted to be k_\texttotal = 1.45 ×10 ^{- 21} T^3.24 exp( - 1384.54/T) k_{\text{total}} = 1.45 \times 10^{ - 21} T^{3.24} \exp ( - 1384.54/T) cm³ molecule⁻¹ s⁻¹ from 200 to 900 K.     

Kinetics of processes occurring at a H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/Pt,H<Subscript>2</Subscript> interface depending on the platinum content on the electrode

Kinetics of processes occurring at H⁺/solid electrolyte/Pt, H₂ three-phase interface are studied subject to the platinum content on the electrode. The study was performed with model electrochemical cells PbO₂/H₃PW₁₂O₄₀/Pt with different platinum content at the working electrode that consisted of platinum deposited onto the E-Tek LT1200-N carbon-nanotubes paper. On the basis of the obtained results, the occurring processes were practically fully separated. It is shown by the analyzing of relaxation curves that there exist at least two processes in the system: the faster one corresponds to the hydrogen reaction; the slower, to the oxygen one. The rates of both processes depend on the platinum content at the working electrode; they have an extreme at the platinum concentration of 0.5 mg/cm². Impedance data allowed revealing the processes’ limiting stages. The experimental data allowed suggesting that at low platinum content the relaxation time is determined by the electrochemical reaction rate; at higher content, by gas diffusion through the platinum dense layer.     

Mixed amphoteric oxide ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> as catalyst for the conversion of 2-methyl-3-butyn-2-ol

The TPR spectra of the conversion of 2-methyl-3-butyn-2-ol (MBOH) on mixed ZrO₂-Al₂O₃ oxides with different ZrO₂ contents were obtained by desorption mass spectrometry. It was shown that MBOH is dehydrated to 3-methyl-3-buten-1-yne on the acid centers (H₀ ≥ –3.3) and is decomposed to acetylene and acetone at the basic centers (H_– ≤ +6.8) of this oxide. The formation of acid centers in the amorphous structure of ZrO₂-Al₂O₃ at 1.5 < Al/Zr < 3is explained by the Tanabe rule.     

Oxidation of Diethyl Sulfide in Aqueous Solutions by Peroxynitrite and the H<Subscript>2</Subscript>O<Subscript>2</Subscript>-NO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> System

It was found that nitrite anions are effective activators of hydrogen peroxide in the reaction with diethyl sulfide. The observed kinetics are consistent with the proposed intermediate formation of peroxynitrous acid (ONOOH). The rate constants for the reaction of diethyl sulfide Et₂S with the acid ONOOH (k₀ = 1.8⋅10³ L/mol⋅s) and with the anion ONOO⁻ (k₋ = 6⋅10⁻² L/mol⋅s) are respectively 10⁵ and three times higher than with hydrogen peroxide. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 290–295, September–October, 2005.     

Synthesis,X-ray studies,spectroscopic investigation,and DFT calculations of [ReBr<Subscript>3</Subscript>(dppt)(OPPh<Subscript>3</Subscript>)]

The reaction of [ReOBr₃(PPh₃)₂] with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) has been examined and [ReBr₃(dppt)(OPPh₃)] has been obtained. It was characterised by IR, UV–Vis spectroscopy, magnetic measurements, and X-ray crystallography. The electronic structure of [ReBr₃(dppt)(OPPh₃)] has been studied by DFT/B3LYP level calculations, and TDDFT calculations were employed for discussion of its electronic spectrum in more detail. The magnetic behavior is characteristic of mononuclear complexes with d⁴ low-spin octahedral Re(III) complexes (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state.     

Photocatalytic intercalated material based on HLaNb<Subscript>2</Subscript>O<Subscript>7</Subscript> as host and Cd<Subscript>0.8</Subscript>Zn<Subscript>0.2</Subscript>S as guest

A novel photocatalytic material (Pt,Cd0.8Zn0.2S)/HLaNb2O7 was fabricated by successive intercalation and exchange reactions. The (Pt,Cd0.8Zn0.2S)/HLaNb2O7 possessed a gallery height less than 0.5 nm and showed a broad absorption with wavelength over 370-500 nm. Using (Pt,Cd0.8Zn0.2S)/HLaNb2O7 as catalyst, the photocatalytic H2 evolution was more than 160 cm3·h-1·g-1 in the presence of Na2S as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. Furthermore, the catalyst showed photocatalytic activity even under visible light irradiation.     

Structure and lithium mobility of Li<Subscript>4</Subscript>Pt<Subscript>3</Subscript>Si

The lithium-rich silicide Li₄Pt₃Si was synthesised from the elements by high-temperature synthesis in a sealed niobium ampoule. Its structure was refined on the basis of single-crystal X-ray diffraction data: R32, a = 693.7(2), c = 1627.1(4) pm, wR2 = 0.0762, 525 F² values and 21 variables. The striking structural motifs of the Li₄Pt₃Si structure are silicon atoms with a slightly distorted trigonal prismatic platinum coordination with short Si–Pt distances (238–246 pm). Always two trigonal prisms are condensed via a common Pt₃ triangle, and these double units built up a three-dimensional network by condensation via common corners. The channels left by this prismatic network are filled by two crystallographically independent lithium sites in a 3:1 ratio. The single crystal X-ray data were fully confirmed by neutron powder diffraction and ⁷Li magic-angle spinning (MAS)–nuclear magnetic resonance (NMR) results. The two distinct lithium sites are well differentiated by their ⁷Li isotropic chemical shift and nuclear electric quadrupolar interaction parameters. MAS-NMR spectra reveal signal coalescence effects above 300 K, indicating chemical exchange between the lithium sites on the millisecond timescale. The spectra can be simulated with a simple two-site exchange model. From the resulting temperature-dependent correlation times, an activation energy of 50 kJ/mol is extracted.     

A comparative study on p-doping behavior of polythiophenes with CH<Subscript>3</Subscript>SO<Subscript>3</Subscript>H

Four kinds of polythiophenes have been doped with CH3SO3H in CHCl3 under air, oxygen, and nitrogen. In the doping of two types of poly(3-hexylthiophene)s, P3HexTh(Zn/Ni) and P3HexTh(Fe) with different contents of a head-to-tail unit, the p-doping occurs at a similar rate. The reaction between poly(3-dodecylthiophene), P3DodTh, and the acid takes place more rapidly. P3OBuTh with a butoxy substituent undergoes more facile p-doping and receives photochemical reaction with CHCl3, and this reaction obeys a pseudo-first-order rate law with a rate constant kobs of 1.42×10-5 s-1 at room temperature.     

Structure and properties of H<Subscript>8</Subscript>(PW<Subscript>11</Subscript>TiO<Subscript>39</Subscript>)<Subscript>2</Subscript>O heteropoly acid

Heteropoly acid (HPA) H₈(PW₁₁TiO₃₉)₂O·xH₂O (I) is synthesized by three different ways and studied by chemical analysis, potentiometric titration, mass-spectrometry, IR, ³¹P, ¹⁸³W, and ¹⁷O NMR spectroscopy, thermogravimetry, and transmission electron microscopy. Anion I consists of two subparticles of the Keggin structure bridged by Ti-O-Ti. The dimeric anion exists in HPA aqueous solutions at [I] > 0.02 M. At pH > 0.6 it splits to a [PW₁₁TiO₄₀]⁵⁻ monomer stable up to pH ∼ 6. When heated (150–400)°C, I splits into H₃PW₁₂O₄₀ and, apparently, H₃PW₁₀Ti₂O₃₈ without phase separation. Thermolysis products are soluble and when dissolved in water turn again into I. Complete decomposition of I to oxides occurs at ∼450°C.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)