In situ Electroreduction of Graphene Oxide: Increased Sensitivity for the Determination of NADH

A novel and useful method to catalyze the electro‐oxidation of nicotinamide adenine dinucleotide (NADH) over a glassy carbon electrode (GCE) modified with graphene oxide (GO) is presented. Based on the presence of oxygen moieties in GO, which can be easily reduced, an in situ electrochemical generation of reduced graphene oxide (denoted as erGO) applying a sufficient negative potential. A potential of ?1.000 V was selected to generate the erGO/GCE as a pretreatment potential before the detection of NADH. The in situ generated erGO/GCE system produces a decrease in the overpotential of NADH oxidation from +0.720 V to +0.230 V compared with GCE. The process also produced an important increase in current signals. The modified electrode was characterized by scanning electron (SEM) and electrochemical microscopies (SECM), cyclic voltammetry and by Raman spectroscopy. Amperometric detection of NADH via this straightforward electrocatalytic method provides a wide linear range between 10 and 100 μM, a lower detection limit of 0.36 μM and an excellent sensitivity of (1.47±0.09) μA mM^?1.     

Electrochemical Determination of Dopamine Using a Poly(3,4-Ethylenedioxythiophene)-Reduced Graphene Oxide-Modified Glassy Carbon Electrode

Poly(3,4-ethylenedioxythiophene) was deposited on a reduced graphene oxide-decorated glassy carbon electrode through an electrochemical polymerization. The resulting glassy carbon electrode-reduced graphene oxide-poly(3,4-ethylenedioxythiophene) electrode was applied as an electrochemical biosensor for the determination of dopamine in the presence of ascorbic acid and uric acid. The material deposited on glassy carbon electrode was investigated in terms of morphology and structural analysis. The comparison of electrochemical behavior of the glassy carbon electrode-reduced graphene oxide-poly(3,4-ethylenedioxythiophene) electrode with the glassy carbon electrode-graphene oxide, glassy carbon electrode-reduced graphene oxide, and glassy carbon electrode-poly(3,4-ethylenedioxythiophene) electrodes exhibited high electrocatalytic activity for dopamine detection. Electrochemical kinetic parameters of glassy carbon electrode-reduced graphene oxide-poly(3,4-ethylenedioxythiophene), including the charge transfer coefficient α (0.49) and electron transfer rate constant k_s (1.04), were determined and discussed. The glassy carbon electrode-reduced graphene oxide-poly(3,4-ethylenedioxythiophene) electrode was studied for the determination of dopamine by differential pulse voltammetry and exhibited a linear range from 19.6 to 122.8?µM with a sensitivity of 3.27?µA?µM^?1?cm^?2 and a detection limit of 1.92?µM. The developed biosensor exhibited good selectivity toward dopamine with high reproducibility and stability.     

Simultaneous Determination of Ascorbic Acid,Dopamine and Uric Acid,at a Graphene Paste Electrode Modified with Functionalized Graphene Sheets

The present study reports the simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA) in phosphate buffer solution (pH 7.0) using graphene paste electrode modified with functionalized graphene sheets (GPE‐MFGSs). The presence of FGS inhibited the adsorption of AA owing to the electrostatic repulsion, but was favorable for the affinity adsorption of DA and UA via the ion exchange and hydrogen bonding mechanisms, respectively. This led to the decrease in the oxidation potential of AA and the significantly enhanced oxidation peak currents of DA and UA at the GPE‐MFGSs. By cyclic voltammetry and differential pulse voltammetry, the oxidation potentials of AA, DA, and UA, at the GPE‐MFGSs in a ternary mixture were found to be well resolved so that their simultaneous determination could be achieved. Furthermore, the influence of some experimental variables such as graphene paste composition, working solution pH, scan rate and pulse amplitude was studied. In addition, by differential pulse voltammetry, the linear dependence of peak current on the concentration was obtained in the ranges of 0.05–9.0, 0.03–13, and 0.03–5.5 µM with the lowest detection limits of 0.02, 0.01, and 0.01 µM for AA, DAand UA, , respectively.     

Determination of Antimony(III) by Differential Pulse Voltammetry Using a Gold Nanoparticle–Ionic Liquid–Graphene-Modified Selenium-Doped Carbon Paste Electrode

A simple and sensitive differential pulse stripping voltammetric method was developed for the determination of antimony(III) using a selenium-doped carbon paste electrode modified with an ionic liquid, graphene, and gold nanoparticles. The conditions, including the mass of graphene, concentration of hydrochloric acid, deposition potential, and deposition time were optimized by single-factor experiments. Under the optimal conditions, a linear equation of I_Sb(III) (µA)?=??16.9882???11.0929 c (µmol/L) (R?=?0.9965) and a detection limit of 2.7?×?10^?8?mol/L were obtained for 8.0?×?10^?8 to 4.8?×?10^?6?mol/L antimony(III). The response shows that the sensor enhances the sensitivity of antimony due to the high conductivity and large surface areas of the ionic liquid, graphene, and gold nanoparticles. This electrode may provide a new sensing platform for the determination of antimony.     

Novel Electrochemically Treated Graphite Pencil Electrode Surfaces for the Determination of Trace α‐Naphthol in Water Samples

An electrochemically treated graphite pencil electrode (PGPE) has been simply prepared for trace level determination of α‐naphthol. The pretreatment of GPE surfaces is conducted in 0.8 M NaOH by cycling the potential between +1.3 and +1.9 V for 50 CV segments at a scan rate of 100 mV s^?1. The influence of the pretreatment is studied extensively, and optimum conditions are obtained. Linear sweep anodic stripping voltammetry (LSASV) is used for the determination of α‐naphthol. Based on the constructed calibration curve, a linear range of 0.01 μM to 2.0 μM with a detection limit of 1.5 nM (S/N=3) is obtained. The results reveal that the electrochemical treatment of the GPE surface improves its electrochemical catalytic activity with reference to surfaces of the non‐treated GPE. The present method is applied for the determination of trace α‐naphthol in real water samples.     

Synthesis of amphiphilic block copolymer by metal‐free ring‐opening oligomerization of glycidyl phenyl ether initiated with tetra‐n‐butylammonium fluoride in the presence of poly(ethylene glycol) monomethyl ether

Metal‐free ring‐opening oligomerization of glycidyl phenyl ether (GPE) initiated with tetra‐n‐butylammonium fluoride (n‐Bu₄NF) (5.0 mol %) was performed in the presence of poly(ethylene glycol) monomethyl ether (PEGM) (5.0, 10, 20 mol %) as a chain transfer agent, by which the resulting polymers having narrow molecular weight distribution (M_w/M_n < 1.2) were obtained in 80–84% yield. Solubility of the obtained polymers in water increased with the increase of amount of PEGM, owing to an increase of number of PEGM‐block‐oligo(GPE) molecules compared to that of oligo(GPE) molecules having FCH₂– group at the initiating end as well as a decrease in degree of oligomerization of oligo(GPE). The PEGM‐block‐oligo(GPE) was isolated by filtration of the polymer aqueous solution, whose number‐average molecular weights determined by NMR spectroscopic analysis were almost consistent to the theoretical values. The PEGM‐block‐oligo(GPE) formed micelles in aqueous media, whose average particle diameter was 58 and 140 nm for the copolymers having a composition of PEGM:GPE = 62:38 and 53:47, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4451–4458     

铁氰化钴修饰石墨烯平面电极对过氧化氢的传感作用

利用高分子支撑法将气相沉积(CVD)石墨烯从铜基底上转移到聚对苯二甲酸乙二醇酯(PET)基底上,制备出石墨烯平面电极(GPE), 通过循环伏安法将铁氰化钴(CoHCF)纳米颗沉积到GPE上,得到铁氰化钴修饰石墨烯平面电极(CoHCF/GPE).研究表明,此电极对过氧化氢具有良好的传感作用,从而构建一种新型无酶过氧化氢传感器.此传感器在过氧化氢浓度为5.0-1200 μmol/L范围内,响应电流与浓度呈现良好的线性关系,检出限为7.1 nmol/L (S/N=3),响应时间约为2 s,具有稳定性好、抗干扰能力强、制备简单等优点.     

Metabolic stability and determination of cytochrome P450 isoenzymes' contribution to the metabolism of medetomidine in dog liver microsomes

Medetomidine is a potent and selective α2‐adrenergic agonist. The activation of α2‐adrenergic receptor mediates a variety of effects including sedation, analgesia, relief of anxiety, vasoconstriction and bradycardia. However, our main interest is the sedative effects of medetomidine when used as a premedicant prior surgery in companion animals, especially in dogs. Recently, data suggested that following intravenous infusion at six dosing regiments non‐linear pharmacokinetics was observed. Major causes of non‐linear pharmacokinetics are the elimination of the drug not following a simple first‐order kinetics and/or the elimination half‐life changing due to saturation of an enzyme system. The goal of this study was to establish the metabolic stability and determine the metabolic pathway of medetomidine in dog liver microsomes. Consequently, Michaelis–Menten parameters (V_max, K_m), T_1/2 and CL_i were determined. The incubations were performed in a microcentrifuge tube and containing various concentrations of medetomidine (10–5000 nm ), 1 mg/mL of microsomal proteins suspended in 0.1 m phosphate buffer, pH 7.4. Microsomal suspensions were preincubated with NADPH (1 mm ) for 5 min at 37°C prior to fortification with medetomidine. Samples were taken at various time points for kinetic information and the initial velocity (v_i) was determined after 10 min incubation. The reaction was stopped by the addition of an internal standard solution (100 ng/mL of dextrometorphan in acetone). Medetomidine concentrations were determined using a selective and sensitive HPLC‐ESI/MS/MS method. Using non‐linear regression, we determined a K_m value of 577 nm , indicating relatively low threshold enzyme saturation consistent with previous in vivo observation. The metabolic stability was determined at a concentration of 100 nm (?K_m) and the observed T_1/2 was 90 min with a CL_i of 0.008 mL/min indicating moderately low clearance in dog liver microsomes, also consistent with previous in vivo data. Moreover, results suggest that principally medetomidine is metabolized by the CYP3A with a small contribution from CYP2D and CYP2E. The participation of CYP3A is an important discovery since medetomidine is used as a premedicant in combination with fentanyl, ketamine and/or midazolam. These findings combined with a low K_m value may indicate that medetomidine can competitively inhibit the metabolism of these drugs and consequently significantly impair metabolic clearance. Copyright © 2009 John Wiley & Sons, Ltd.     

Graphene‐sensitized microporous membrane/solvent microextraction for the preconcentration of cinnamic acid derivatives in Rhizoma Typhonii

A novel graphene‐sensitized microporous membrane/solvent microextraction method named microporous membrane/graphene/solvent synergistic microextraction, coupled with high‐performance liquid chromatography and UV detection, was developed and introduced for the extraction and determination of three cinnamic acid derivatives in Rhizoma Typhonii. Several factors affecting performance were investigated and optimized, including the types of graphene and extraction solvent, concentration of graphene dispersed in octanol, sample phase pH, ionic strength, stirring rate, extraction time, extraction temperature, and sample volume. Under optimized conditions, the enrichment factors of cinnamic acid derivatives ranged from 75 to 269. Good linearities were obtained from 0.01 to 10 μg/mL for all analytes with regression coefficients between 0.9927 and 0.9994. The limits of quantification were <1 ng/mL, and satisfactory recoveries (99–104%) and precision (1.1–10.8%) were also achieved. The synergistic microextraction mechanism based on graphene sensitization was analyzed and described. The experimental results showed that the method was simple, sensitive, practical, and effective for the preconcentration and determination of cinnamic acid derivatives in Rhizoma Typhonii.     

Multi‐Wall Carbon Nanotube Paste Electrode for Adsorptive Stripping Determination of Quercetin: A Comparison with Graphite Paste Electrode via Voltammetry and Chronopotentiometry

Adsorptive‐stripping voltammetry and chronopotentiometry were used to study the adsorption and oxidation of quercetin at both graphite‐nujol paste electrode (GPE) and carbon nanotubes‐nujol paste electrode (CNTPE) for the potential application of carbon nanotube to flavonoids determination. As compared with GPE, CNTPE showed very great power to adsorb quercetin and resulted in a considerable signals enhancement. The adsorption isotherm of quercetin on CNTPE was of Langmuir type, and the stripping of quercetin adsorbed on CNTs showed a quasi‐reversible oxidation reaction involving two‐electron and two‐proton. The high adsorbtive activity of CNTPE was contributed to the high specific surface area and the special surface characteristics of carbon nanotubes. The peak current response of differential pulse voltammetry depended linearly on quercetin concentration. A linear equation I_p(μA)=0.987c(μmol L^?1)+0.023 with a correlation coefficient of 0.994 was obtained over the concentration range 0.1–1.0 μmol L^?1.     

One‐Step Synthesis of β‐Cyclodextrin Functionalized Graphene/Ag Nanocomposite and Its Application in Sensitive Determination of 4‐Nitrophenol

β‐Cyclodextrin functionalized graphene/Ag nanocomposite (β‐CD/GN/Ag) was prepared via a one‐step microwave treatment of a mixture of graphene oxide and AgNO₃. β‐CD/GN/Ag was employed as an enhanced element for the sensitive determination of 4‐nitrophenol. A wide linear response to 4‐nitrophenol in the concentration ranges of 1.0×10^?8–1.0×10^?7 mol/L, and 1.0×10^?7–1.5×10^?3 mol/L was achieved, with a low detection limit of 8.9×10^?10 mol/L (S/N=3). The mechanism and the heterogeneous electron transfer kinetics of the 4‐nitrophenol reduction were discussed according to the rotating disk electrode experiments. Furthermore, the sensing platform has been applied to the determination of 4‐nitrophenol in real samples.     

Determination of E. coli by a Graphene Oxide-Modified Quartz Crystal Microbalance

A biosensor for the determination of Escherichia coli using graphene oxide on the crystal (gold) surface was fabricated by the drop cast method. The E. coli sensing characteristics of the biosensor, such as a change in frequency, were examined by exposing the graphene oxide-coated crystal to various functionalization steps at room temperature. Graphene oxide was functionalized by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride–N-hydroxysuccinimide to covalently conjugate β-galactosidase antibodies to recognize microorganisms that produce this material. Frequency changes in the quartz crystal microbalance are dependent on the absorbed/desorbed masses of the analytes on the functional surface of the crystal. In addition, various characterization techniques were optimized for the morphological elemental analysis of the nanocoating that included field emission scanning electron microscopy, scanning electron microscopy, and electron diffraction spectroscopy. This surface was used in a quartz crystal microbalance nanoplatform for the rapid, sensitive, and label-free detection of E. coli. Under optimal conditions, the frequency of quartz crystal microbalance biosensor was directly proportional to the concentration of antigen with a dynamic range from 0.5?mg?mL^?1 to 5?ng?mL^?1 and a minimum detection limit of 5?ng?mL^?1, and a sensitivity of 0.037?Hz?g?ml^?1?cm^?1. These results show that the graphene oxide-coated crystal had excellent performance for E. coli. This research reports a simple, inexpensive, and effective highly stable biosensor using graphene oxide as the sensing medium.     

Electrodeposition of PdAu Alloy Nanoparticles on Ionic Liquid Functionalized Graphene Film for the Voltammetric Determination of Oxalic Acid

An ionic liquid functionalized graphene film was prepared and PdAu nanoparticles (NPs) were electrodeposited on it. The PdAu NPs were characterized by various methods and they showed the features of alloys. In 0.2 M H₂SO₄ solution, oxalic acid (OA) exhibited a sensitive anodic peak at the resulting electrode at about 1.1 V (vs. SCE), and the peak current was linear to OA concentration in the range of 5–100 µM with a sensitivity of 45.5 µA/mM. The detection limit was 2.7 µM (S/N=3). The electrode was successfully applied to the determination of OA in real sample.     

Gold Nano Particle and Reduced Graphene Oxide Composite Modified Carbon Paste Electrode for the Ultra Trace Detection of Arsenic (III)

Gold nanoparticles (AuNPs) and reduced graphene oxide (RGO) composite modified carbon paste electrode (CPE) was prepared by electrodepositing AuNPs over the reduced graphene oxide (RGO) modified carbon paste electrode. The composite material was characterised using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and atomic force microscopy (AFM) techniques. The nano composite modified electrode was applied for the determination of total As and for the inorganic speciation of As(III) and As(V) in environmental samples. The linear dynamic range was obtained for the determination of As(III) in the present method from 1μgL⁻¹ to 20 μgL⁻¹ and the limit of detection(LOD) in the standard solution was found to be 0.13 μgL⁻¹ for the 300 sec deposition time in 10 mL supporting electrolyte solution. This method was applied for the determination of As (III) in water and soil samples. The results were agreed well with the result obtained from the hydride generation atomic absorption spectrometry.     

Preparation and properties of biocomposites composed of bio‐based epoxy resin,tannic acid,and microfibrillated cellulose

As new bio‐based epoxy resin systems, glycerol polyglycidyl ether (GPE) and sorbitol polyglycidyl ether (SPE) were cured with tannic acid (TA) at various conditions. When the curing conditions were optimized for the improvement of thermal and mechanical properties, the most balanced properties were obtained for the GPE/TA and SPE/TA cured at 160 °C for 2–3 h at the epoxy/hydroxyl ratio of 1/1. The cured SPE/TA had a higher glass transition temperature (T_g) and tensile strength than the cured GPE/TA. Next, biocomposites of GPE/TA and SPE/TA with microfibrillated cellulose (MFC) were prepared by mixing aqueous solution of the epoxy/curing reagent with MFC, and subsequent drying and curing at the optimized condition. For both the GPE/TA/MFC and SPE/TA/MFC biocomposites, T_g and the storage modulus at rubbery plateau region increased with increasing MFC content over the studied range of 3–15 wt %. The tensile strength at 25 °C for GPE/TA/MFC biocomposite with MFC content 10 wt % was 76% higher than that of control GPE/TA, while the tensile modulus was little improved. On the other hand, the tensile strength and modulus of SPE/TA/MFC biocomposite with MFC content 10 wt % were 30 and 55% higher than those of control SPE/TA, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 425–433, 2010     

Mechanistic study of ring‐opening copolymerization of ɛ‐caprolactam with epoxide: Development of novel thermosetting epoxy resin system

We investigated the mechanism of the ring‐opening copolymerization of ?‐caprolactam (?‐CL) with glycidyl phenyl ether (GPE) to afford poly(?‐CL‐co‐GPE) as a model reaction of the thermal curing of certain epoxy resins with ?‐CL. The reaction of ?‐CL and GPE proceeded efficiently in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) at 170^°C for 2 h. The monomer reactivities r₁ of ?‐CL and r₂ of GPE calculated according to the Fineman‐Ross method and the Kelen‐Tüdös method were 0.58 and 5.52, respectively. These values indicate that poly(?‐CL‐co‐GPE) has a pseudo‐block gradient copolymer. Based on these results, we examined the thermal curing reactions of certain epoxy resins with ?‐CL. The corresponding novel cured products were obtained quantitatively, and each of them showed a high glass transition temperature and high thermal stability, presumably due at least in part to a pseudo‐block gradient primary structure resembling that of poly(?‐CL‐co‐GPE). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2220–2228     

Investigation of Methanol Behavior at the Designed Electrochemical Sensor based on Ni(II) Complex and Graphene Nanosheets

In this work, the electrochemical oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with (N‐5‐methoxysalicylaldehyde, N´‐2‐hydroxyacetophenon‐1, 2 phenylenediimino nickel(II) complex (Ni(II)–MHP) and reduced graphene oxide (RGO), which is named Ni(II)‐MHP/RGO/CPE, in an alkaline solution. This modified electrode was found to be efficient for the oxidation of methanol. It was found that methanol was oxidized by the NiOOH groups generated by further electrochemical oxidation of nickel(II) hydroxide on the surface of the modified electrode. Under optimum conditions, some parameters of the analyte (MeOH), such as the electron transfer coefficient (α), the electron transfer rate constant) k_s), and the diffusion coefficient of species in a 0.1 M solution (pH = 13), were determined. The designed sensor showed a linear dynamic range of 2.0–100.0 and 100.0–1000.0 μM and a detection limit of 0.68 μM for MeOH determination. The Ni(II)‐MHP/RGO/CPE sensor was used in the determination of MeOH in a real sample.     

Gas-generating Porous Electrodes: Effect of the Catalyst Activity on the Polarization Curves

Effect of the activity of the catalyst in gas-generating porous electrodes (GPE) of the DSA type on the anodic branch of polarization curves is studied. The structure of the GPE porous space and the electrode kinetics are assumed to remain invariant. The quantities that are varied are the electrode thickness and the exchange current j ₀. Characteristics of GPE electrodes of high, medium, and low activity (j ₀ of 1.2 × 10^–2,1.2 × 10^–4, and 1.2 × 10^–6 A cm^–2, respectively) are compared. The standard thicknesses, calculated for these electrodes, are 1, 5, and 20 m. In GPE of high and medium activity, after the emergence of first gas pores, the gas generation region, which before this was localized in a narrow region near the front surface of GPE, can rapidly expand by tens of times, so can the overall current. With a further overvoltage increase, ohmic restrictions again press the gas generation region to the front surface of GPE. In the low-activity GPE, the expansion of the gas generation region and the increase in the overall current are insignificant. It is shown that the medium-activity GPE commonly used in the chlorine electrolysis may be viewed as optimal. However, this by no means implies that the DSA operation mechanism is ideal. Perfecting the porous-space structure of DSA even further gives one a chance to considerably better its electrochemical characteristics.     

β‐Cyclodextrin‐modified three‐dimensional graphene oxide‐wrapped melamine foam for the solid‐phase extraction of flavonoids

A new three‐dimensional graphene oxide‐wrapped melamine foam was prepared and used as a solid‐phase extraction substrate. β‐Cyclodextrin was fabricated onto the surface of three‐dimensional graphene oxide‐wrapped melamine foam by a chemical covalent interaction. In view of a specific surface area and a large delocalized π electron system of graphene oxide, in combination with a hydrophobic interior cavity and a hydrophilic peripheral face of β‐cyclodextrin, the prepared extraction material was proposed for the determination of flavonoids. In order to demonstrate the extraction properties of the as‐prepared material, the adsorption energies were theoretically calculated based on periodic density functional theory. Static‐state and dynamic‐state binding experiments were also investigated, which revealed the monolayer coverage of flavonoids onto the β‐cyclodextrin/graphene oxide‐wrapped melamine foams through the chemical adsorption. ¹H NMR spectroscopy indicated the formation of flavonoids–β‐cyclodextrin inclusion complexes. Under the optimum conditions, the proposed method exhibited acceptable linear ranges (2–200 μg/L for rutin and quercetin‐3‐O‐rhamnoside; 5–200 μg/L for quercetin) with correlation coefficients ranging from 0.9979 to 0.9994. The batch‐to‐batch reproducibility (n = 5) was 3.5–6.8%. Finally, the as‐established method was satisfactorily applied for the determination of flavonoids in Lycium barbarum (Goji) samples with relative recoveries in the range of 77.9–102.6%.     

Anionic alternating copolymerization behavior of bifunctional six‐membered lactone and glycidyl phenyl ether

A copolymerization of 10‐methyl‐2H,8H‐benzo‐[1,2‐b:5,4‐b′]bipyran‐2,8‐dione ( 1 ) and glycidyl phenyl ether (GPE) was studied. 1 was a bislactone designed as a bifunctional analogue of 3,4‐dihydrocoumarin (DHCM), of which anionic 1:1 alternating copolymerization with GPE has been reported by us, previously. This alternating nature was inherited by the present copolymerization of 1 and GPE, leading to an intriguing copolymerization behavior in contrast to the ordinary statistical copolymerizations of monofunctional monomers and bifunctional monomers usually controlled by the proportional dependence of the crosslinking density on the monomer feed ratio: (1) When the feed ratio [GPE]₀/[ 1 ]₀ was 1, the two monomers underwent the 1:1 alternating copolymerization. In this case, 1 behaved as a monofunctional monomer, that is, only one of the two lactones in 1 participated in the copolymerization allowing the other lactone moiety to be introduced into the side chain almost quantitatively. (2) Increasing the feed ratio [GPE]₀/[1]₀ to larger than 4 allowed almost all of the lactone moieties to participate in the copolymerization system to give the corresponding networked polymers efficiently. The compositions of the copolymers [GPE unit]/[ 1 ‐derived acyclic ester unit] were always biased to smaller values than the feed ratios [GPE]₀/[lactone moiety in 1 ]₀ by the intrinsic 1:1 alternating nature of the copolymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3662–3668, 2009