Radiation-induced catalytic degradation of p-nitrophenol (PNP) in the presence of TiO2 nanoparticles

The gamma radiation induced catalytic degradation of p-nitrophenol (PNP) in the presence of titanium dioxide (TiO₂) nanoparticles in aqueous solution was investigated. The initial concentration of PNP solution was 50 mg/L, and the additional TiO₂ doses were 0, 0.5, 1.0, and 2.0 g/L. The experimental results indicated that the PNP decomposition kinetics conformed to the modified pseudo-first order reaction equation under all applied conditions. When the TiO₂ dose was in the range of 0–2.0 g/L, the effect of additional TiO₂ on PNP decomposition rate was not obvious because PNP could be removed quite well by irradiation even in the absence of TiO₂ nanoparticles; however, the removal of total organic carbon (TOC) and total nitrogen (TN) was significantly accelerated in the presence of TiO₂ nanoparticles, the TOC removal efficiency increased from about 16% to 42%, and therefore the mineralization of PNP could be enhanced by TiO₂ nanoparticles. The inorganic nitrogen products were quantitatively measured to estimate the decomposition degree of PNP. The major aromatic intermediates, as well as carboxylic acids were identified by LCMS and IC. Possible reactions involved in radiation induced catalytic decomposition of PNP in aqueous solutions were proposed.     

Ordered nanostructured ceramic–metal composites through multifunctional block copolymer-metal nanoparticle self-assembly

A novel strategy for fabrication of ordered ceramic–metal nanocomposites was demonstrated by multifunctional block copolymer/metal nanoparticle self-assembly. Hybrid organic–inorganic block copolymer poly(3-methacryloxypropyl-T8-heptaisobutyl-polyhedral oligomeric silsesquioxane-block-N,N-dimethylaminoethyl methacrylate) was synthesized and used as a bi-functional structure directing agent for ligand-stabilized platinum nanoparticles to form ordered organic–inorganic nanocomposites with dense loading of inorganic species in both microphase separated domains. Subsequently, thin films of the hybrid material were converted to ordered silica (ceramic)–platinum (metal) nanocomposites via UV-assisted ozonolysis. This is the first time ordered ceramic–metal nanocomposites were achieved through a bottom-up approach, opening up opportunities for the design and synthesis of a broad range of ordered inorganic–inorganic nanocomposites.     

Synthesis of a reduction-sensitive Bletilla striata polysaccharide amphiphilic copolymer

A reduction-sensitive stearic acid modified-Bletilla striata polysaccharide amphiphilic copolymer is synthesized. The copolymer enabled to spontaneously form micelles which display faster docetaxel release rates under reduction condition and enhanced anticancer activity in vitro after incorporating docetaxel into micelles.     

Shear induced structure orientation in norbornene block copolymers: In situ Rheo-SAXS investigations

Alignment of microphase separated block copolymers (BCP) has been achieved by shear-fields in order to achieve a deeper understanding of the melt-infiltration of BCP into nanopores (30–400 nm). BCP’s composed of different perfluorinated sidechains, namely A_m-b-D_n-, A₁₀₀-b-D₁₀₀- and A₁₄₀-b-D₆₀- and A_m-b-C_n–BCPs and A₅₀-b-C₈ and A₅₀-b-C₁₃ have been studied by rheology coupled to in situ-SAXS. BCP’s were prepared by ROMP-methods, generating the BCP’s with low polydispersities and the expected molecular weights. A strong macroscopic orientation of the investigated block copolymer domains A₅₀-b-C₁₃ occurs upon applying oscillatory shear forces at temperatures significantly above the T_g’s using shear amplitudes of 10% and angular frequencies of 10 rad/s for an already short period of time like 100 s. Coupled Rheology to SAXS-measurements on block copolymer A₁₀₀-b-D₁₀₀ at 180 °C revealed a similar picture when sheared at 10% shear amplitude and an angular frequency of 10 rad/s over a time of 100 s. In both BCP’s a slow relaxation of the oriented microphases was observed, which can be explained by the nanophase-separation of the respective fluorinated chains.     

TiO2/EDTA-rich carbon composites: Synthesis,characterization and visible-light-driven photocatalytic reduction of Cr(VI)

TiO₂/EDTA-rich carbon composites exhibits excellent photoreduction of Cr(VI) activity via ligand-to-metal charge transfer process.     

Novel amphiphilic triblock copolymer based on PPDO,PCL, and PEG: Synthesis,characterization, and aqueous dispersion

Amphiphilic triblock copolymer, poly(p-dioxanone-co-caprolactone)-block-poly(ethylene oxide)-block-poly(p-dioxanone-co-caprolactone) (PPDO-co-PCL-b-PEO-b-PPDO-co-PCL) was synthesized by ring opening polymerization (ROP) of p-dioxanone and ɛ-caprolactone initiated through the hydroxyl end of poly(ethylene glycol) (PEG) in the presence of stannous 2-ethyl hexanoate [Sn(oct)₂] as a catalyst. Polymerization and structural features of the polymers were analyzed by different physicochemical techniques (GPC, ¹H NMR, ¹³C NMR, FT-IR, DSC and TGA). The splitting of ¹H NMR resonance at δ 2.3 and δ 4.1 ppm reveals the random copolymerization. Polymeric nanoparticles were prepared in phosphate buffer (pH 7.4) by co-solvent evaporation technique at room temperature (25 °C). Existence of hydrophobic domains as cores of the micelles were characterized by ¹H NMR spectroscopy and further confirmed with fluorescence technique using pyrene as a probe. Critical micelle concentration (CMC) of the polymer in phosphate buffer (pH. 7.4) was decreased from 2.3 × 10⁻³ to 7.6 × 10⁻⁴ g/L with the fraction of PCL. Polymeric nanoparticles observed by atomic force microscopy (AFM) were uniform and spherical, with smooth textured of around 50–30 nm diameter. Dynamic light scattering (DLS) and electrophoretic light scattering (ELS) measurements showed a monodisperse size distribution of around 113–90 nm hydrodynamic diameters and negative zeta (ζ) potential (−4 to −14 mV), respectively. The investigations for the polymeric nanoparticles in aqueous medium showed that the composition of the hydrophobic segment of amphiphilic block copolymer makes a significant influence on its physicochemical characteristics.     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Coassembly of Metal and Titanium Dioxide Nanocrystals Directed by Monolayered Block Copolymer Inverse Micelles for Enhanced Photocatalytic Performance

Functional nanostructures of self‐assembled block copolymers (BCPs) incorporated with various inorganic nanomaterials have received considerable attention on account of their many potential applications. Here we demonstrate the two‐dimensional self‐assembly of anisotropic titanium dioxide (TiO₂) nanocrystals (NCs) and metal nanoparticles (NPs) directed by monolayered poly(styrene)‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) copolymer inverse micelles. The independent position‐selective assembly of TiO₂ NCs and silver nanoparticles (AgNPs) preferentially in the intermicelle corona regions and the core of micelles, respectively, for instance, was accomplished by spin‐coating a mixture solution of PS‐b‐P4VP and ex situ synthesized TiO₂ NCs, followed by the reduction of Ag salts coordinated in the cores of micelles into AgNPs. Hydrophobic TiO₂ NCs with a diameter and length of approximately 3 nm and 20–30 nm, respectively, were preferentially sequestered in the intermicelle nonpolar PS corona regions energetically favorable with the minimum entropic packing penalty. Subsequent high‐temperature annealing at 550 °C not only effectively removed the block copolymer but also transformed the TiO₂ NCs into connected nanoparticles, thus leading to a two‐dimensionally ordered TiO₂ network in which AgNPs were also self‐organized. The enhanced photocatalytic activity of the AgNP‐decorated TiO₂ networks by approximately 27 and 44 % over that of Ag‐free TiO₂ networks and randomly deposited TiO₂ nanoparticles, respectively, was confirmed by the UV degradation property of methylene blue.     

Novel synthesis of high-surface-area ordered mesoporous TiO2 with anatase framework for photocatalytic applications

Ordered mesoporous TiO₂ materials with an anatase frameworks have been synthesized by using a cationic surfactant cetyltrimethylammonium bromide (C₁₆TMABr) as a structure-directing agent and soluble peroxytitanates as Ti precursor through a self-assembly between the positive charged surfactant S⁺ and the negatively charged inorganic framework I^? (S⁺I^? type). The low-angle X-ray diffraction (XRD) pattern of the as-prepared mesoporous TiO₂ materials indicates a hexagonal mesostructure. XRD and transmission electron microscopy results and nitrogen adsorption–desorption isotherms measurements indicate that the calcined mesoporous TiO₂ possesses an anatase crystalline framework having a maximum pore size of 6.9 nm and a maximum Brunauer–Emmett–Teller specific surface area of 284 m² g^?1. This ordered mesoporous anatase TiO₂ also demonstrates a high photocatalytic activity for degradation of methylene blue under ultraviolet irradiation.     

Dual-response nanocarrier based on graft copolymers with hydrazone bond linkages for improved drug delivery

Core–shell micelles with biodegradability, thermo- and pH-response were successfully demonstrated by poly(2-oxepane-1,5-dione-co-ɛ-caprolactone) (P(OPD-co-CL)) grafted with hydrophilic segments of amine-terminated poly(N-isopropylacrylamide) (At-PNIPAM). To compare with the graft copolymer, P(OPD-co-CL) block PNIPAM polymer was also prepared. The micelles with core–shell structure were formed with both graft and block copolymers by self-assembly in aqueous solutions, of which PNIPAM shell is thermo-response. Furthermore, P(OPD-co-CL)-g-PNIPAM also showed pH-sensitivity, which was attributed to the acid-cleavable property of the hydrazone bond. The low critical micelle concentrations (CMCs) of graft polymers and block polymers were 6.7 mg/L and 14.3 mg/L, respectively, which indicated the formation of stable micelles. Both drug-free and drug-loaded micelles were in uniformly spherical shape observed by transmission electron microscopy (TEM). The sizes of the drug-free and drug-loaded micelles prepared from graft polymer were 123.5 nm and 146.5 nm, respectively, and the sizes of those prepared from block polymer were 197.5 nm and 211.5 nm, respectively. The lower critical solution temperature (LCST) for the graft polymer was 34.3 °C, while that for the block polymer was 28.1 °C, demonstrating a thermo-response. The graft polymeric micelles exhibited thermo-triggered decelerated release at pH 7.4, and pH-triggered accelerated release at 25 °C in vitro release test, indicating that the graft polymeric micelles could be a promising site-specific drug delivery system for enhancing the bioavailability of the drug in targeted pathological areas.     

Synthesis and studies on photochromic properties of vanadium doped TiO2 nanoparticles

Pure and (0.5–3 at%) vanadium doped TiO₂ nanoparticles have been synthesized by wet chemical method. The as synthesized materials have been characterized by using XRD, atomic force microscope (AFM), Raman, EPR and UV–vis spectroscopy techniques. From XRD studies, both pure as well as vanadium doped TiO₂ have been found to show pure anatase phase. The value of lattice constant c is smaller in doped TiO₂ as compared to undoped and has been found to decrease with increase in vanadium concentration. AFM studies show formation of spherical particles with particle size ～23 nm in all the samples. Photochromic behavior of these materials has been studied by making their films in alkyd resin. Vanadium doped TiO₂ films show reversible change in color from beige-yellow to brownish violet on exposure to UV light. The mechanism of coloration and bleaching process has been discussed.     

A lotus root-like porous nanocomposite polymer electrolyte

A lotus root-like porous nanocomposite polymer electrolyte (NCPE) based on poly(vinylidene difluoride-co-hexafluoropropylene) [P(VDF-HFP)] copolymer and TiO₂ nanoparticles was easily prepared by a non-solvent induced phase separation (NIPS) process. The formation mechanism of the lotus root-like porous structure is explained by a qualitative ternary phase diagram. The resulting NCPE had a high ionic conductivity up to 1.21 × 10⁻³ S cm⁻¹ at room temperature, and exhibited a high electrochemical stability potential of 5.52 V (vs. Li/Li⁺), lithium ion transference number of 0.65 and 22.89 kJ mol⁻¹ for the apparent activation energy for transportation of ions. It is of great potential application in polymer lithium ion batteries.     

TiO2/polyaniline composites： An efficient photocatalyst for the degradation of methylene blue under natural light

Polyaniline (PAn) sensitized nanocrystalline TiO_2 composites (TiO_2/PAn) were successfully prepared and used as an efficient photocatalyst for the degradation of dye methylene blue (MB).The results showed that PAn was able to sensitize TiO_2 efficiently and the composite photocatalyst could be activated by absorbing both the ultraviolet and visible light (λ:190～800nm),whereas pure TiO_2 absorbed ultraviolet light only (λ<380nm).Under the irradiation of natural light,MB could be degraded more efficiently on the TiO_2/PAn composites than on the TiO_2.Furthermore,it could be easily separated from the solution by simple sedimentation.     

Organic/inorganic nanocomposite polymer electrolyte

The organic/inorganic nanocomposites polymer electrolytes were designed and synthesized. The organic/inorganic nanocom-posites membrane materials and their lithium salt complexes have been found thermally stable below 200℃. The conductivity of the organic/inorganic nanocomposites polymer electrolytes prepared at room temperature was at magnitude range of 10-6 S/cm.     

Visible LED light photoelectrochemical sensor for detection of L-Dopa based on oxygen reduction on TiO2 sensitized with iron phthalocyanine

The present work describes the development of a new strategy to photoelectrochemical detection of L-Dopa at low potential based on oxygen reduction on TiO₂ sensitized with iron phthalocyanine (FePc/TiO₂). The FePc/TiO₂ composite shows a photocurrent 10-fold higher than that of pure TiO₂ nanoparticles and it was 4-fold higher than that of FePc exploiting visible light. The band gaps of pure TiO₂ nanoparticles, FePc and FePc/TiO₂, calculated according to the Kubelka–Munk equation, were 3.22 eV, 3.11 eV and 2.82 eV, respectively. The FePc/TiO₂ composite showed a low charge transfer resistance in comparison to the photoelectrode modified with FePc or TiO₂. Under optimized conditions, the photoelectrochemical sensor shows a linear response range from 20 up to 190 μmol L^− 1 with a sensitivity of 31.8 μA L mmol^− 1 and limit of detection of 1.5 μmol L^− 1 for the detection of L-Dopa.     

Photocatalytic activity of TiO2 nanotube layers loaded with Ag and Au nanoparticles

Ag and Au nanoparticles were found to significantly enhance the photocatalytic activity of self-organized TiO₂ nanotubular structures. The catalyst systems are demonstrated to be highly efficient for the UV-light induced photocatalytic decomposition of a model organic pollutant – Acid Orange 7. The metallic nanoparticles with a diameter of ∼10 ± 2 nm (Ag) and ∼28 ± 3 nm (Au) were attached to a nanotubular TiO₂ layer that consists of individual tubes of ∼100 nm of diameter, ∼2 μm in length and approx. 15 nm of wall thickness. Both metal particle catalyst systems enhance the photocatalytic decomposition significantly more on the nanotubes support than placed on a compact TiO₂ surface.     

Thermal plasma synthesis of nanotitania and its characterization

Titanium dioxide (TiO₂) nanoparticles were prepared by the thermal plasma synthesis; which give a highly crystalline product. Their morphological studies are carried out by using techniques like SEM, EDAX, TEM and SEAD. Crystal size was calculated by XRD using Scherrer equation; which is observed at two current amperes; at 80 A size ranges between 25 and 30 nm and at 120 A size ranges between 30 and 42 nm. Composition analysis was done by TEM–EDAX, FTIR and Fast Fourier Transform techniques. The FTIR peaks clearly show that synthesized TiO₂ nanoparticles are in anatase phase; this phase is generally preferred because of its high photocatalytic activity, since it has a more negative conduction band edge potential (higher potential energy of photogenerated electrons), high specific area, nontoxic, photochemically stable and relatively in expensive.     

Synthesis and characterization of push–pull organic semiconductors with various acceptors for solution-processed small molecule organic solar cells

New efficient push–pull organic semiconductors comprising of the bis(9,9-dimethyl-9H-fluoren-2-yl)aniline (bisDMFA) donor and the various acceptors such as NO₂, DCBP, and TCF, which were linked with bithiophene or vinyl bithiophene π-conjugation bridges, were synthesized, and their photovoltaic characteristics were investigated in solution-processed small molecule organic solar cells (SMOSCs). The intramolecular charge transfers of these materials were effectively appeared in between bisDMFA donor and acceptors, depending on the electron-withdrawing strength of acceptors. The organic semiconductors having NO₂ and DCBP acceptors exhibited the most efficient photovoltaic performance, showing power conversion efficiency (PCE) of 1.98% (±0.17) and 2.01% (±0.21), respectively. When the TiO_x thin layer was treated on photoactive layer, the organic semiconductor having NO₂ showed the best PCE of 2.70% with short circuit current of 8.19 mA/cm², fill factor of 0.40, and open circuit voltage of 0.83 V in SMOSC devices.     

Electrochemically synthesized CdS nanoparticle-modified TiO2 nanotube-array photoelectrodes: Preparation,characterization, and application to photoelectrochemical cells

A novel electrodeposited CdS nanoparticle-modified highly-ordered TiO₂ nanotube-array photoelectrode and its application to photoelectrochemical cells is reported. Results show formation of a thin, nanoparticulate CdS layer, comprised of sphere-like 10–20 nm diameter nanoparticles, on the anodic synthesized TiO₂ nanotube-array (inner diameter of 70 nm, wall thickness 25 nm and ca. 400 nm length) electrode. The resulting CdS–TiO₂ photoelectrode has an as-fabricated bandgap of 2.53, and 2.41 eV bandgap after sintering at 350 °C in N₂ ambient. Photoelectrochemical properties are described in detail.     

Microwave-irradiated synthesized platinum nanoparticles/carbon nanotubes for oxidative determination of trace arsenic(III)

Platinum nanoparticles/carbon nanotubes (Pt_nano/CNTs) were rapidly synthesized by microwave radiation, and applied for the oxidative determination of arsenic(III). The transmission electron microscopy (TEM) revealed the size of synthesized Pt nanoparticles with nominal diameter of 15 ± 3 nm. Pt_nano/CNTs modified glassy carbon electrode (Pt_nano/CNTs/GCE) exhibited better performance for arsenic(III) analysis than that of Pt nanoparticles modified GCE (Pt_nano/GCE) by electrochemical deposition or Pt foil electrode. Excellent reproducibility of the Pt_nano/CNTs/GCE was obtained with the relative standard deviation (RSD) of 3.5% at 20 repeated analysis of 40 μM As(III), while the RSD was 9.8% for Pt_nano/GCE under the same conditions. The limit of determination (LOD) of the Pt_nano/CNTs/GCE was 0.12 ppb, which was 1–2 orders of magnitude lower than that of Pt_nano/GCE or Pt foil electrode.