Kinetic study of gamma-glutamyltransferase activity by electrophoretically mediated microanalysis combined with micellar electrokinetic capillary chromatography

The use of capillary electrophoresis for the determination of gamma-glutamyltransferase (GGT) activity with gamma-glutamyl-p-nitroanilide (Glu-p-NA) as a substrate was investigated. The reaction velocity was quantified spectrophotometrically by the corrected peak area of the product p-nitroaniline (pNA) at 380 nm. Micelles composed of sodium deoxycholic acid were used in the background electrolyte in order to obtain a baseline separation between the substrate and the product. The presence of the micelles did not influence the enzymatic reaction. The electrophoretic system was used, not only for the separation and quantitation of the different reaction compounds but also for the in-capillary mixing of the enzyme and substrate plugs. This methodology is known as electrophoretically mediated microanalysis (EMMA). With the developed in-capillary activity assay an average Michaelis constant (K(M)) for GGT was calculated to be 2.09 mM (RSD = 7.3%, n = 3), a value consistent with previously reported values.     

High-performance liquid chromatographic assay for acid and alkaline phosphatase in serum.

High-performance liquid chromatography was used to assay serum acid and alkaline phosphatase. Samples were incubated with adenosine-5'-monophosphoric acid (AMP) in a buffer of required pH, 5'-nucleotidase was inhibited with Ni2+ ions, and the phosphatase activity was determined by measuring the concentration of the reaction product, adenosine. The analysis time, after the incubation is terminated, is short (7 min), and the assay is quantitative and reproducible. Complete separation of the reaction product from the substrate and the naturally occurring serum constituents and the high sensitivity of the ultraviolet detection system eliminate some of the problems commonly encountered in spectrophotometric assays.     

Liquid Chromatographic Assay of Peptides Activity with Inhibiting Angiotensin Converting Enzyme

A rapid, simple and interference-free method was developed to evaluate the inhibitory activity of hydro-lyzed peptides from egg white protein against the angiotensin-converting enzyme. The total reaction volume was 60 μL, saving the cost. The assay was based on a HPLC separation and quantification of the synthetic substrate hip-puryl-L-histidyl-L-leucine and its hydrolyzed product―hippuric acid; the separation was performed on a C 18 column eluted by a mobile phase of acetonitrile/water(0.5% TFA) at a volume ratio of 25:75. At a signal to noise ratio(S/N) of 10, the detective limit of the quantitation of hippuric acid was (0.4600±0.0097) μmol/L. The standard curve shows a linear response with a slope of 49488 and a correlation coefficient of 0.9995. The assay was adequate for the study of ACE inhibition by Captopril and peptides derived from food protein, and showed a very good correlation with the previous methods.     

Capillary electrophoretic approach to screen for enzyme inhibitors in natural extracts

This paper demonstrates development of electrophoretically mediated micro analysis (EMMA), for screening protein tyrosine phosphatase (PTP) inhibitors in natural extracts. It is demonstrated that capillary electrophoresis (CE) separation of the substrate and the product allows for using the assay in an on-column format to monitor the reaction without typically used fluorogenic substrates. Michaelis-Menten kinetics parameters calculated based on the EMMA results (Km = 1.2-1.5 microM) were in a good agreement (Km = 1.0-1.5 microM) obtained using an off-line CE functional assay (CE FA). EMMA of PTP titrated with different concentrations of ligand demonstrated the peak-shift phenomenon normally seen in affinity capillary electrophoresis. This feature of EMMA gives an indication of the binding affinity of the ligand in addition to its functional activity, providing another dimension in characterization of the protein-inhibitor interaction. It was demonstrated that simultaneous screening of the primary PTP target and a secondary, counter target (PTP-C) using the EMMA format can be used to prioritize hits based on their specificity.     

Micellar electrokinetic chromatography and laser induced fluorescence detection of botulinum neurotoxin type A activity using a dual-labelled substrate

The activity of Botulinum neurotoxin type A (BoNT A) can be measured by monitoring the toxin's endopeptidase reaction with its peptide substrate. In this report, a sensitive and simple capillary electrophoresis (CE) method for analysing BoNT A activity was developed using a peptide substrate labelled with Fluorescein isothiocynate (FITC) at the N-terminal and biotin at the C-terminal. This dual labelling enables not only highly sensitive laser induced fluorescence (LIF) detection of the reaction product, but also good analytical separation of the product from the peptide substrate by Micellar Electrokinetic Chromatography (MEKC). The separation between the product peak and the substrate peak was approximately 5 min using the dual-labelled substrate, while just about 1 min using the FITC-labelled substrate without biotinylation. Using the current assay method, BoNT A with concentration as low as 0.1 ng ml^?1 (3.6 U mL^?1 in mouse LD₅₀) in water was detected with a S:N ratio of 3 (RSD <19%) and a linear range of four orders of magnitude. With CE's advantages of very small sample volume needed, this method may find particular applications as in assays of BoNT A activity in water samples and kinetic analyses of toxin activity.     

Measuring the activity of farnesyltransferase by capillary electrophoresis with laser-induced fluorescence detection

Enzymatic farnesylation of oncogenic forms of Ras proteins is the initial step in a series of posttranslational modifications essential for Ras activity. The modification is catalyzed by the enzyme, protein farnesyltransferase (PFTase), which transfers a farnesyl moiety from farnesyl diphosphate to the protein. We employed capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection to develop a rapid and sensitive method for the determination of PFTase activity in vitro. The limited substrate specificity of PFTase allowed us to use a fluorescently labeled pentapeptide instead of a Ras protein as a substrate for the enzyme; the product of the enzymatic reaction was the farnesylated pentapeptide. The product was separated from the substrate by CE and quantified with LIF detection. Under optimal conditions, the separation was achieved within 10 min with a resolution of 86. The mass and concentration limits of detection for the farnesylated product were 10(-19) mol and 0.28 nM, respectively. By measuring the rate of accumulation of the farnesylated product, we were able to determine the kinetic parameters of the enzymatic reaction. For yeast PFTase as an enzyme and difluorocarboxyfluorescein-labeled GCVIA peptide as a substrate, the values of k(cat) and K(M) were found to be (3.1 +/- 0.3)x10(-3) s(-1) and (12.0 +/- 1.2) nuM, respectively. Our results suggest that CE-LIF can be efficiently used for the determination of enzymatic activity of PFTase in vitro. After minor modifications, the developed method can be also applied to other reactions of enzymatic prenylation of proteins.     

An integrated on-chip sirtuin assay

A microchip-based assay to monitor the conversion of peptide substrates by human recombinant sirtuin 1 (hSIRT1) is presented. For this purpose a fused silica microchip consisting of a microfluidic separation structure with an integrated serpentine micromixer has been used. As substrate for the assay, we used a 9-fluorenylmethoxycarbonyl (Fmoc)-labeled tetrapeptide derived from the amino acid sequence of p53, a known substrate of hSIRT1. The Fmoc group at the N-terminus resulting from solid-phase peptide synthesis enabled deep UV laser-induced fluorescence detection with excitation at 266 nm. The enzymatic reaction of 0.1 U/μL hSIRT1 was carried out within the serpentine micromixer using a 400 μM solution of the peptide in buffer. In order to reduce protein adsorption, the reaction channel was dynamically coated with hydroxypropylmethyl cellulose. The substrate and the deacetylated product were separated by microchip electrophoresis on the same chip. The approach was successfully utilized to screen various SIRT inhibitors.     

Method development and measurements of endogenous serine/threonine Akt phosphorylation using capillary electrophoresis for systems biology

Signal transduction studies have indicated that Akt is essential for transducing the signals originating from extracellular stimuli. An exploration of the Akt signal transduction mechanism depends on the ability to assay its activation states by determining the ability of Akt to phosphorylate various substrates. This paper describes a CE-based kinase assay for Akt using a UV detection method. The RPRAATF peptide was used as the specific substrate to determine the Akt activity. Under the CE separation conditions used, the phosphorylated and nonphosphorylated forms of the RPRAATF peptide were rapidly resolved in the Akt reaction mixture within 20 min. Using this method for measuring the Akt activity, the incubation time for the Akt reactions as well as the kinetic parameters (KM) were examined. Furthermore, the developed method was applied to a PC12 cell system to assess the dynamics of the Akt activity by examining the effectiveness of the RPRAATF peptide substrate under various cytokine-stimulated environments. These results highlight the feasibility of the CE method, which is a simple and reliable technique for determining and characterizing various enzyme reactions particularly kinase enzymes.     

Determination of enzymatic activity and properties of secretory phospholipase A2 by capillary electrophoresis.

A capillary electrophoretic (CE) system coupled with a diode array UV detector was used for the assay of secretory phospholipase A2 (sPLA2) activity. This method is based on monitoring both the breakdown of substrates and the formation of products simultaneously using micellar electrokinetic chromatographic techniques. Under our developed separation conditions, we analyzed the substrates and products quantitatively, and investigated enzyme activity as a function of reaction time and presence of enzyme activator or inhibitor. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was also utilized to confirm the phosphatidylcholine, a substrate of sPLA2. In order to test the feasibility of the developed method for measurement of enzymatic activity, we compared it to the conventional radioactive assay method for sPLA2. On the basis of our results, the conventional method can be complemented, or even replaced, by this new CE method which possesses the advantages of short analysis time, use of non-radiolabeled and inexpensive substrates, simple measurement of enzymatic activity, and exact quantitation of substrate and product.     

High temporal resolution monitoring of enzyme reaction and inhibition using optically gated vacancy capillary electrophoresis and immobilized enzyme

A novel method for monitoring of enzyme reaction and inhibition with high temporal resolution was developed by using optically gated vacancy capillary electrophoresis (OGVCE) with laser-induced fluorescence (LIF) detection and immobilized enzyme. Trypsin cleavage reaction and inhibition were investigated by the presented OGVCE-LIF assay, using carboxyfluorescein (FAM) end-labeled Angiotensin as the substrate and commercially available immobilized trypsin. The substrate and the product were continuously loaded into the capillary by the electroosmotic flow while the immobilized enzyme remained in the sample vial. Substrate consumption and product formation were monitored simultaneously at 5 s interval during the whole reaction time. The enzymatic reaction rates obtained from the substrate and the product were highly consistent. The enzyme activity and the Michaelis constants of trypsin cleavage reaction, as well as the inhibition constant (for reversible competitive inhibitor) and the inhibition fraction (for irreversible inhibitor), were obtained. It was showed that the reported OGVCE-LIF method can perform fast, accurate, sensitive and reproducible CE enzyme assay with high temporal resolution, thus has great potential in application of the enzyme-substrate systems with fast reaction rate and the fluorescent substrate and products.     

Off-line and in-line determination of catechol- O-methyltransferase activity in a capillary electrophoretic system

The use of capillary electrophoresis for the determination of catechol-O-methyltransferase (COMT) activity with dihydroxybenzoic acid as a substrate was investigated. Both an off-line and in-line capillary electrophoresis determination of COMT activity was developed and the two approaches are discussed. In the presented methods, substrate and reaction products are monitored at the same time. The initial velocity of the reaction is quantified spectrophotometrically by the corrected peak area of the products at 200 nm. In the off-line setup, capillary zone electrophoresis is used to separate and quantify the different reaction compounds. Each electrophoretic run required only 37 nL of the enzymatic reaction solution. Based on the off-line assay, an in-line determination of COMT activity was developed by a methodology known as electrophoretically mediated microanalysis (EMMA). All the different steps (i.e. mixing, incubation, separation and in-line quantitation) are combined in the capillary, which is used as a microreactor for the enzymatic reaction. Full automation of the assay is achieved with this microscale approach.     

Assay of sialidase activity using ion-exchange chromatography and acidic ninhydrin reaction.

A new assay method for sialidase (EC 3.2.1.18) activity using ion-exchange chromatography and acidic ninhydrin reaction has been developed. Fetuin, 4-methylumbelliferyl-N-acetylneuraminic acid (MUB-NANA), gangliosides and N-acetylneuramin-lactose were examined as substrates. Free sialic acid liberated from these substrates by sialidase reaction was isolated with a Dowex 1-X8 column (trifluoroacetate form, 1.5 cm x 0.5 cm I.D.) and determined by acidic ninhydrin reaction. Among the substrates tested, MUB-NANA was the best in the present method, N-Acetylneuramin-lactose could not be used as the substrate, because it was not separated from liberated sialic acid under the conditions used. The recovery of N-acetylneuraminic acid was above 88%, and the sensitivity of the method was 20 nmol in 300 microliters of the reaction mixture. The method was applied to the sialidase assay during its purification from rat skeletal muscle, and a Michaelis constant of 1.15 mM was obtained with MUB-NANA as the substrate. The method using the acidic ninhydrin reaction was simple and exhibited good reproducibility.     

Screening of tyrosinase inhibitors by capillary electrophoresis with immobilized enzyme microreactor and molecular docking

A new method for screening tyrosinase inhibitors from traditional Chinese medicines (TCMs) was successfully developed by capillary electrophoresis with reliable online immobilized enzyme microreactor (IMER). In addition, molecular docking study has been used for supporting inhibition interaction between enzyme and inhibitors. The IMER of tyrosinase was constructed at the outlet of the capillary by using glutaraldehyde as cross‐linker. The parameters including enzyme reaction, separation of the substrate and product, and the performance of immobilized tyrosinase were investigated systematically. Because of using short‐end injection procedure, the product and substrate were effectively separated within 2 min. The immobilized tyrosinase could remain 80% active for 30 days at 4°C. The Michaelis–Menten constant of tyrosinase was determined as 1.78 mM. Kojic acid, a known tyrosinase inhibitor, was used as a model compound for the validation of the inhibitors screening method. The half‐maximal inhibitory concentration of kojic acid was 5.55 μM. The method was successfully applied for screening tyrosinase inhibitors from 15 compounds of TCM. Four compounds including quercetin, kaempferol, bavachinin, and bakuchiol were found having inhibitory potentials. The results obtained in this work were supported by molecular docking study.     

High-performance liquid chromatographic assay for thymidylate synthase from the human malaria parasite, Plasmodium falciparum

A rapid and highly sensitive high-performance liquid chromatographic assay for thymidylate synthase activity is described. The assay is based on the separation of the substrate, deoxyuridylate (dUMP), and its product, deoxythymidylate (dTMP), on a LiChrosorb RP-8 reversed-phase column with 44 mM triethylammonium phosphate (pH 7.0) as mobile phase and a flow-rate of 1.0 ml/min. In addition, using a mu Bondapak C18 reversed-phase column with 10 mM potassium phosphate (pH 4.0) and a gradient of 0-28% methanol, dUMP, dTMP and deoxythymidine (dTdR) are well separated within 30 min. The latter system is also applied to assay thymidine kinase activity with dTdR and dTMP as substrate and product, respectively. This method is sensitive enough to measure dTMP at concentrations as low as 25 pmol, and it was used to show that crude extracts of the human malaria parasite Plasmodium falciparum contain thymidylate synthase but not thymidine kinase activity.     

Michaelis-Menten analysis of bovine plasma amine oxidase by capillary electrophoresis using electrophoretically mediated microanalysis in a partially filled capillary

A method for determining bovine plasma amine oxidase (PAO; EC 1.4.3.6) activity with benzylamine (Bz) as substrate is described. Electrophoretically mediated microanalysis (EMMA) combined with micellar electrokinetic capillary chromatography (MEKC) was used to perform an on-capillary enzymatic reaction and to separate the generated benzaldehyde from the other reaction products. The capillary was only partially filled with the separation solution, since the enzyme was unstable in the presence of the applied surfactant. The initial reaction velocity of the enzyme-catalyzed reaction was estimated from the peak area of the enzyme product, benzaldehyde. An amplification step was introduced by means of an on-capillary incubation of 15 min, in order to accumulate enough reaction product to detect spectrophotometrically at 254 nm. This set-up resulted in a fully automated assay, which can be carried out in less then 35 min. Using the Lineweaver-Burk equation, an average Michaelis constant (K(M)) for PAO was calculated to be 0.74 mM +/- 0.05 mM, which is consistent with previously reported values.     

Screening neuraminidase inhibitors from glycosaminoglycan and natural extract by capillary electrophoresis

An electrophoretically mediated microanalysis (EMMA) method for screening neuraminidase inhibitors in depolymerized glycosaminoglycan and natural extracts is described. In the present method, enzyme and substrate were individually introduced into the capillary as distinct plugs, and then mixed for a short time. Afterwards the voltage was reapplied to separate the product from the unreacted substrate and the natural extract. The measured peak area of the product at 214 nm represents the enzyme activity. The electrophoretic conditions for the enzyme reaction and separation of substrate and product were optimized in this study. Under the optimal conditions, the Michaelis–Menten constant and the inhibitive mechanism of zanamivir were studied, which agreed with the literature data. Furthermore, the inhibitory ratios of enzymatic activity of depolymerized glycosaminoglycan and traditional Chinese drugs were determined. The EMMA method has superiority over traditional assay methods, in not only minimizing the false-positive results but also in simplifying the experimental procedure. Therefore, it could be employed to screen inhibitors from natural sources.     

In‐capillary reactant mixing for monitoring glycerol kinase kinetics by CE

CE was used for the first time to study the two‐substrate enzyme glycerol kinase. The capillary was used as a nanoreactor in which the enzyme and its two substrates glycerol and adenosine‐5′‐triphosphate were in‐capillary mixed to realize the enzymatic assay. For kinetic parameters determination, reactants were injected (50 mbar × 5 s) as follows: (i) incubation buffer; (ii) adenosine‐5′‐triphosphate; (iii) enzyme, and (iv) glycerol. Enzymatic reaction was then initiated by mixing the reactants using electrophoretically mediated microanalysis (+20 kV for 6 s) followed by a zero‐potential amplification step of 3 min. Finally, electrophoretic separation was performed; the product adenosine‐5′‐diphosphate was detected at 254 nm and quantified. For enzyme inhibition, an allosteric inhibitor fructose‐1,6‐bisphosphate plug was injected before the first substrate plug and +20 kV for 8 s was applied for reactant mixing. A simple, economic, and robust CE method was developed for monitoring glycerol kinase activity and inhibition. Only a few tens of nanoliters of reactants were used. The results compared well with those reported in literature. This study indicates, for the first time, that at least four reactant plugs can be in‐capillary mixed using an electrophoretically mediated microanalysis approach.     

A rapid assay to screen adenosine deaminase inhibitors from Ligustri Lucidi Fructus against metabolism of cordycepin utilizing ultra-high-performance liquid chromatography–tandem mass spectrometry

Cordycepin has recently received increased attention owing to its extensive pharmacological activity. Adenosine deaminase (ADA) is widely distributed in mammalian blood and tissues; as a result, cordycepin is quickly metabolized upon entering into the body and converted into the inactive metabolite 3′-deoxyinosine, thus limiting its activity when administered alone. We herein present a novel ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method for screening ADA inhibitors against the metabolism of cordycepin. Cordycepin and 3′-deoxyinosine were chosen as substrate and product, respectively. A proper separation was achieved for all analytes within 3 min. 3′-Deoxyinosine was quantified in the presence or absence of potential ADA inhibitors to evaluate ADA activity. The assay can simultaneously determine substrate and product, with the endogenous substance and ADA inhibitors added not interfering in its activity. After optimizing the enzymatic incubation and UHPLC–MS/MS conditions, K_m and V_max values for ADA deamination of cordycepin were 95.18 ± 7.85 μm and 363.90 ± 12.16 μmol/min/unit, respectively. Oleanolic acid and ursolic acid from Ligustri Lucidi Fructus were chosen as ADA inhibitors with half maximal inhibitory concentration values of 21.82 ± 0.39 and 18.41 ± 0.14 μm , respectively. A non-competitive inhibition model was constructed and this assay can be used to screen other potential ADA inhibitors quickly and accurately.     

二氢叶酸还原酶抑制剂的高效毛细管电泳法筛选模型的建立与应用

建立了一种采用毛细管电泳法(CE)测定二氢叶酸还原酶(DHFR)反应动力学参数的新方法。以含0.002%Brij-35的50 mmol/L 的硼砂缓冲溶液（pH 9.18）作为电泳介质,检测波长280 nm,于19 min内实现了体系中各组分的基线分离。根据酶反应过程中反应物和反应产物的浓度变化计算有关反应动力学参数。将已知的氨甲喋呤、甲氧苄胺嘧啶和叶酸3种抑制剂作用于所建立的二氢叶酸还原酶体系,测得抑制剂的半数抑制浓度与文献值相接近,证明本体系可用于二氢叶酸还原酶抑制剂(DHFRI)的筛选。     

高效液相色谱法测定血管紧张素转化酶抑制剂的活性

建立了体外直接测定血管紧张素转化酶抑制剂活性的高效液相色谱分析方法。以马尿酰-组氨酰-亮氨酸为反应底物,血管紧张素转化酶为催化剂,反应所生成的马尿酸为测定指标,未加酶抑制剂的反应为空白对照。使用ZORBAX SB-C18色谱柱(4.6 mm i.d.×150 mm,填料粒径5　μm),柱温25 ℃,流动相为乙腈-超纯水(体积比为25∶75,各含0.05%（体积分数）三氟乙酸及0.1%（体积分数）三乙胺),流速0.5 mL/min,检测波长228 nm。在马尿酸浓度为0.005～1.000 mmol/L时,马尿酸浓度与其峰面积呈良好的线性关系(r＝0.9999),最小检测限为0.50 μmol/L;该方法对马尿酸的回收率为99.48%～105.64%,相对标准偏差(RSD)为2.20%(n＝6)。该方法可适用于血管紧张素转化酶抑制剂活性的体外测定,具有操作简便、精密度和准确性高的特点,为降血压药物的研制提供了方便可靠的检测手段。