Azathia crown ethers carrying pyrene pendant as receptor molecules for metal sensor systems

A series of crown ethers carrying a pyrene group with nitrogen–sulfur donor atoms, that differ in having three, four and five sulfur atoms in the macrocycle was designed and synthesized by the reaction of the corresponding macrocyclic compound and 1-bromomethylpyrene. The influence of metal cations such as Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Al³⁺ on the spectroscopic properties of the ligands was investigated in acetonitrile–dichloromethane (1:1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Fe²⁺, Zn²⁺, Cu²⁺, Pb²⁺ and Hg²⁺. The results of spectrophotometric titration experiments disclosed the complexation compositions and complex stability constants of the novel ligands with Fe²⁺, Zn²⁺, Cu²⁺, Pb²⁺ and Hg²⁺ cations. The monoazatetrathia crown ether showed good sensitivity for Cu²⁺ with linearity in the range 5.0×10^?7–2.5×10^?6 M and detection limit of 1.6×10^?8 M.     

Rhodamine B-based “turn-on” fluorescent and colorimetric chemosensors for highly sensitive and selective detection of mercury (II) ions

Two novel macromolecules based on 2-[3-(2-aminoethylsulfanyl)propylsulfanyl]ethanamine covalently bound to one and two units of rhodamine-B moieties, 1 and 2, were prepared and utilized as fluoroionophores and chromophores for the optical detection of Hg²⁺ ions. The sensors were readily prepared by a conventional two-step synthesis. Especially, sensor 1 exhibits high sensitivity and selective OFF–ON fluorescence enhancement and chromogenic change upon binding to Hg²⁺, which served as a “naked-eye” indicator by a noticeable color change of the solution (from colorless to pink–red color). 1 is shown to discriminate various competing metal ions, particularly Ag⁺ and Cu²⁺, as well as Cd²⁺, Na⁺, Li⁺, K⁺, Ba²⁺, Co²⁺, Ni²⁺, Mg²⁺, Mn²⁺ and Al³⁺, with a detection limit of 10 ppb.     

A New Highly Sensitive and Selective Fluorescent Cadmium Sensor

Condensation product (L) of salicylaldehyde and semicarbazide behaves as a fluorescent sensor for Cd²⁺ ion, in 1:1 DMSO:H₂O, over Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺ ions. The emission peak of L at λ_max = 520 nm, on excitation with 420 nm wavelength photons, showed an enhancement in intensity of ca 60-fold when interacted with Cd²⁺ ion. The intensity was however found to remain unaltered when interacted with metal ions—Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺. The intensity increases by approximately 20 fold on interaction with Zn²⁺ ion. The increase in the fluorescent peak can be explained on the basis of photo induced electron transfer (PET) mechanism. A 1:1 complexation between Cd²⁺ and L with log β = 4.25 has been proved.     

A Novel Ratiometric Fluorescent Chemosensor for Cd2+

Novel ratiometric fluorescent chemosensor C7 was synthesized and characterized by UV–vis and fluorescence spectroscopy. C7 showed high sensitivity for Cd²⁺ among Na⁺, Mg²⁺, Cu²⁺, Pb²⁺, Ni²⁺, Fe³⁺, Zn²⁺, Ag⁺ Hg²⁺ and Cd²⁺ in ethanol.     

New dithiacrown–ether butadienyl dyes: synthesis,structure, and complex formation with heavy metal cations

Benzothiazole type butadienyl dyes containing a dithia‐15‐crown‐5 ( 2a ) or dithia‐18‐crown‐6 ether ( 2b ) moieties were synthesized. The structures of dyes 2a , b and their complexes with Ag⁺ and Pb²⁺ were studied by an X‐ray crystallography. It was found that the conformations of dithiacrown–ether moieties of dyes 2a , b are unfavorable for complex formation and change significantly upon binding of Ag⁺ or Pb²⁺. The complexation of 2a , b with Ag⁺, Cd²⁺, Pb²⁺, and Hg²⁺ in water–acetonitrile mixtures with different contents of water (P_W = 0–75%, v/v) was studied by ¹H NMR, UV–Vis spectroscopy, and polarography. In anhydrous acetonitrile, the stability constants of 1:1 complexes change in the sequence Cd²⁺ < Pb²⁺ ≤ Ag⁺ << Hg²⁺ in the case of 2a and in the sequence Cd²⁺ < Ag⁺ < Pb²⁺ << Hg²⁺ in the case of 2b . As P_W increases, the thermodynamic stability of Ag⁺ complexes increases. The opposite effect is observed for the complexes with Cd²⁺, Pb²⁺, and Hg²⁺. When P_W ～ 50%, the stability constants of complexes with Cd²⁺ and Pb²⁺ become too small to be measured. The selectivity of ligands 2a , b toward Hg²⁺ versus Ag⁺ is very high at any P_W values (selectivity coefficients > 10⁴). The complexation of 2a , b with Hg²⁺ at P_W ≤ 50% is accompanied by a substantial hypsochromic effect. This allows dithiacrown‐containing butadienyl dyes to be used as selective optical molecular sensors for heavy metal ions, in particular, in aqueous solutions. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensing of Zn2+ion by N-Furfurylsalicylaldimine Based on CHEF Process†

The recognition ability of N-Furfurylsalicylaldimine (HL) toward various cations (Pb²⁺, Hg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Zn²⁺, Cu²⁺, Ni²⁺, Co²⁺, K⁺, Sr²⁺, and Na⁺) has been studied by UV–Vis and fluorescence spectroscopy. The compound showed highly selective fluorescence signaling behaviour for Zn²⁺ ions in methanol-water medium based on CHEF process and is capable of distinguishing Zn²⁺ from Cd²⁺ ion. From single crystal X-ray analysis it is revealed that a Zn²⁺ ion binds two ligand molecules through imine nitrogen and phenolate oxygen atom.

A Rhodamine Derivative Based Chemosensor with High Selectivity and Quick Respond to Cr<Superscript>3+</Superscript> in Aqueous Solution

In this paper, a new kind of colorimetric chemsensor aiming at detecting Cr³⁺ has been synthesized, and it is based on the “Off-On” effect of a rhodamine derivative. Comparing with other metal irons (Na⁺, K⁺, Ni²⁺, Hg²⁺, Fe³⁺, Mn²⁺, Co²⁺, Cd²⁺, Cu²⁺, Pb²⁺, Zn²⁺, Mg²⁺, Ba²⁺, Ag⁺, Fe²⁺, Ce³⁺), the chemsensor has a quick and accurate response to Cr³⁺ in H₂O-EtOH solution (4/1, v/v). There is an obvious change in color, from colorless to bright pink when Cr³⁺ is detected. According to the fitting curve based on Benesi-Hildebrand equation and working curve of absorption strength in UV-vis spectrum, the binding pattern of Cr³⁺ and the rhodamine derivative follows a 1:1 stoichiometry. The chemsensor shows great potential in monitoring Cr³⁺ in the aqueous medium with high efficiency, which is supposed to complete the recognition in the minimum as 5.2?×?10^?7 mol/L within 5 min.     

A Novel Hg<Superscript>2+</Superscript> Selective Ratiometric Fluorescent Chemodosimeter Based on an Intramolecular FRET Mechanism

A irreversible Hg²⁺ selective ratiometric fluorescence probe FR, a fluorescein fluorophore linked to a rhodamine B hydrazide by a thiourea spacer, was designed and synthesized. The developed probe FR exhibited great ratiometric fluorescence enhancement and remarkable yellow-magenta color change toward Hg²⁺ with excellent selectivity in aqueous acetone solution, and the ratiometric fluorescence response to Hg²⁺ was not interfered by other metal cations including Fe³⁺, Co²⁺, Ni²⁺, Cr³⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺ and Mn²⁺. The linear range and the detection limit of this supposed ratiometric fluorescence method for Hg²⁺ were 0.0–10.0 × 10⁻⁶ and 5 × 10⁻⁸ M, respectively.     

Metal Complexation Properties of Schiff Bases Containing 1,3,5-Triazine Derived from 2-Hydroxy-1-Naphthaldehyde in Solution. A Simple Spectrofluorimetric Method to Determine Mercury (II)

Four new Schiff base ligands carrying naphthalene groups were prepared from the reaction of 2,4-diamino-6-methyl-1,3,5-triazine and 2,4-diamino-6-undecyl-1,3,5-triazine with 2-hydroxy-1-naphthaldehyde. The influence of a series of metal ions including Cu²⁺, Co²⁺, Hg²⁺, Al³⁺, Cr³⁺, Fe³⁺, Pb²⁺, Ni²⁺, Cd²⁺, Zn²⁺, Mn²⁺, Ag⁺, Ba²⁺, Ca²⁺ and Mg²⁺ on the spectroscopic properties of the ligands was investigated by means of absorption and emission spectrometry. The results of spectrophotometric and spectrofluorimetric titrations disclosed the complexation stoichiometry and complex stability constant of the ligands with metal ions. A simple spectrofluorimetric method was developed using the Schiff base derived from 2,4-diamino-6-undecyl-1,3,5-triazine to determine Hg²⁺ ion. No cleanup or enrichment of the tap water sample was required. A modified standard addition method was used to eliminate matrix effect. The standard addition graph was linear between 0.2 and 2.6 mg/L in determination of Hg²⁺. Detection and quantification limits were 0.08 and 0.23 mg/L, respectively. The simple and cost-effective method can be applied to water samples.     

Fluorescence Sensors for Selective Detection of Hg2+ Ion Using a Water-Soluble Poly(vinyl alcohol) Bearing Rhodamine B Moieties

The novel water-soluble poly(vinyl alcohol) with pendant rhodamine B moiety as colorimetric and fluorescene chemosensor for Hg²⁺ ions was prepared by grafting poly(vinyl alcohol) using rhodamine B hydrazide and hexamethylenediisocyanate as fluorescent dye and coupling agent, respectively. Because of their good water-solubility, the polymers binding rhodamine B can be used as chemosensors in aqueous media. With the addition of Hg²⁺ ions into the aqueous solution, visual color changes and fluorescence enhancements were detected. In addition, we also noticed that other metal ions such as Ag⁺, Cd²⁺, Co²⁺, Cu²⁺, K⁺, Mg²⁺, Ba²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Cr³⁺, Fe³⁺ and Zn²⁺ cannot induce obvious changes to the fluorescence spectra of the polymer chemosensors. The combination of water solubility and positive fluorescence response as well as color change are hence particularly promising for the practical utility of the sensors.     

8-Hydroxyquinoline Functionalized Graphene Oxide: an Efficient Fluorescent Nanosensor for Zn<Superscript>2+</Superscript> in Aqueous Media

A nanosensor, based on 8-hydroxyquinoline functionalized graphene oxide, was developed for the fluorescence detection of Zn²⁺. It showed high selectivity and sensitivity for Zn²⁺ion in aqueous solution over other metal ions such as Li⁺, Na⁺, Ca²⁺, Mg²⁺, Al³⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Fe²⁺, Fe³⁺and Cr³⁺. Due to the linearity of the emission intensity toward Zn²⁺ concentration, fluorescent technique could be used for the detection of Zn²⁺ ion even at very low concentrations.     

Effects of excessive Zn2+ ions on intrinsic magnetic and structural properties of Ni0.2Zn0.6Cu0.2Fe2O4 powder prepared by chemical coprecipitation method

Zn(OH)₂ is a kind of amphoteric compound. Therefore, for chemical coprecipitation method, the precipitation of Zn²⁺ ions may be incomplete if using NaOH as precipitator. In this study, single-phase powder specimens with a nominal composition Ni_0.2Zn_0.6Cu_0.2Fe₂O₄ were prepared with chemical coprecipitation method, and the effects of excessive Zn²⁺ content (x, x = 3%, 5%, 7%, 9%) in working solution on intrinsic magnetic and structural properties were studied by vibrating sample magnetometer and X-ray diffractometer, respectively. It was found that the magnetization when H_m = 398 kA/m (5000 Oe) reached a maximum when x = 5%, and then decreased with the increase of x, which was attributed to the effect of different amount of Zn²⁺ in A sites on the A–B and B–B exchange interaction. Moreover, it was found that the lattice parameter was affected by the Zn²⁺ and Fe³⁺ ions due to their different ion radius to a certain extent.     

The studies on structural and thermal properties of delithiated LixNi1/3Co1/3Mn1/3O2 (0 < x ≤ 1) as a cathode material in lithium ion batteries

The structural and thermal properties of the delithiated Li_xNi_1/3Co_1/3Mn_1/3O₂ (0 < x ≤ 1) material have been investigated by using diffraction and thermoanalytical techniques such as XRD and TG-DSC methods. XRD result shows that the delithiated materials maintain the O3-type structure with defined stoichiometric number at the range of 0.24 < x ≤ 1, exhibiting good crystal structural stability. The cobalt and nickel ions in the delithiated materials change their valence state (i.e. Co³⁺ to Co⁴⁺ and Ni³⁺ to Ni⁴⁺) when x < 0.49; the irreversible changes of the transformation may affect the first cycle of charge–discharge efficiency of the materials. A comparison of the results of TG-DSC with TPD-MS shows that the irreversible change of oxygen species during the delithiation process of Li_xNi_1/3Co_1/3Mn_1/3O₂ have great influence on the structural and thermal stability and reversibility of the materials.     

Multi-ion and pH sensitivity of AgGeSe ion selective electrodes

Many chalcogenide glasses have been found to combine benefits such as good chemical durability, selectivity, and reproducibility for applications as solid-state sensitive membranes of ion selective electrodes (ISEs). In previous works, we have shown that ISEs with ionic conductive AgGeSe membranes have good sensitivity to Ag⁺ ions. In the present work, we explore the Ag_x(Ge_0.25Se_0.75)_100−x, 10≤x≤30 (at%) system as candidate for ISEs applications detecting several other ions (K⁺, Mg²⁺, Cr³⁺, Fe³⁺, Ni²⁺, Cd²⁺, Hg²⁺, and Pb²⁺). We evaluated ISEs fabricated with bulk as well as with thin film membranes. We found no dependence of the sensing properties on the Ag content of the ionic conductive membranes. Thin films exhibited the same properties than bulk membranes, indicating that these chalcogenide glasses have great potential for miniaturization. The ISEs showed a high response (Nernstian or super-Nernstian) to the presence of Hg²⁺, Pb²⁺, and Fe³⁺, a low response (sub-Nernstian) to the presence of Cr³⁺, and a total lack of response to the presence of Cd²⁺, Ni²⁺, Mg²⁺, and K⁺. We also tested how the pH of the solution affected the response of the ISEs. The potentials of the ISEs were practically constant in neutral or acidic solutions, while decreased drastically in basic solutions when the primary ion was not present. The latter phenomenon was caused by the slow dissolution of the membrane into the solution, meaning that long-term basic environments should be avoided for these ISEs. We concluded that ISEs with ionic conductive AgGeSe membranes are good candidates to integrate multi-electrode systems.     

Formation of nickel and nickel,zinc-bearing ferrite in aqueous suspension by air oxidation

Stoichiometric Ni-bearing ferrite was formed by air oxidation of an iron(II) hydroxide suspension at an initial Ni : Fe_tot mol ratio (r_Ni) of 0.20 : 2.80 at pH 10.0 and 65°C. Most of products formed at r_Ni=0.40 : 2.60 and 0.60 : 2.40 were Ni-bearing ferrites, of which vacancies of Fe³⁺ ion on the lattice points may be considered. Only Ni, Zn-bearing ferrites were formed in the suspensions at initial (Ni + Zn)  : Fe_tot mol ratios (r_{Ni + Zn}) of 0.20 : 2.80–0.60 : 2.40 at pH 10.0 and 65°C. At higher r_Ni or r_{Ni + Zn} by-products containing Ni, Fe and O₄²⁻ were formed. The formation of the by-products was depressed in the suspensions containing chloride ions in the place of sulfate ions.     

Synthesis and characterization of two new fluorescent macrocycles: A novel fluorescent chemosensor for zinc ion

Two new macrocyclic systems (L¹, L²) containing two emissive naphthalene were synthesized and characterized. The macrocycles were studied by ¹H NMR, ¹³C NMR, COSY, HMQC, DEPT, microanalysis and mass spectroscopy. The influence of metal cations Na⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ on the spectroscopic properties of the macrocyclic systems in acetonitrile/DMF 9:1 (v/v) mixtures were investigated by means of absorption and emission spectrophotometry. The macrocycle L¹ was found to be as an effective fluorescence sensor for Zn²⁺ ions. Zn²⁺ and Cd²⁺ ions show the most effects on the fluorescence intensity of L².     

Influences of Al doping concentration on structural,electrical and optical properties of Zn0.95Ni0.05O powders

Nanocrystalline Zn_0.95−xNi_0.05Al_xO (x = 0.01, 0.02, 0.05 and 0.10) diluted magnetic semiconductors have been synthesized by an auto-combustion method. X-ray diffraction measurements indicate that all Al-doped Zn_0.95Ni_0.05O samples have the pure wurtzite structure. Transmission electron microscope analyses show that the as-synthesized powders are of the size 40–45 nm. High-resolution transmission electron microscope, energy dispersive spectrometer and X-ray photoemission spectroscope analyses indicate that Ni²⁺ and Al³⁺ uniformly substitute Zn²⁺ in the wurtzite structure without forming any secondary phases. The Al doping concentration dependences of cell parameters (a and c), resistance and the ratio of green emission to UV emission have the similar trends.     

A New Reactive 1,8-Naphthalimide Derivative for Highly Selective and Sensitive Detection of Hg<Superscript>2+</Superscript>

A 1,8-naphthalimide derivative with a reactive aliphatic hydroxyl was designed and synthesized as a fluorescent probe. Its structure was characterized by IR, ¹H NMR, ¹³C NMR, LC-MS and HPLC. The probe showed high selectivity and sensitivity to Hg²⁺ over other metal ions such as Pb²⁺, Na⁺, K⁺, Cd²⁺, Cr³⁺, Zn²⁺, Cu²⁺, Ni²⁺, Ca²⁺, Fe³⁺, Fe²⁺, Co²⁺, Mn²⁺ and Mg²⁺ in MeCN/H₂O (15/85, v/v). The increase in fluorescence intensity was linearly proportional to the concentration of Hg²⁺ in the range of 18–40 μM with a detection limit of 1.38 × 10^?7 mol/L. The probe could work in a pH span of 4.3–9.0 and respond to Hg²⁺ quickly with strong anti-interference ability. Job’s plot suggested a 1:2 complex of the probe and Hg²⁺.     

The growth and field evaporation of Er and deuterated Er films

The morphological structure of clean and deuterated Er films deposited on W substrates and their removal by field evaporation have been investigated as part of a program directed toward the development of deuterium ion sources for neutron generators. Annealed Er films up to ~ 20 monolayers in thickness deposited on W < 110 > substrates appear pseudomorphic. Thicker annealed films form a hexagonal close-packed < 0001 > orientated over-layer with the Pitsch–Schrader orientation relation. The pseudomorphic and hexagonal close-packed character of the films is retained up to the last atomic layer that forms the film-substrate interface. Deuterated Er films appear polycrystalline. At 77 K in Ar, annealed Er films field evaporate at 2.5 V/Å primarily as Er^2 + and deuterated Er films evaporate at ~ 2.4 V/Å primarily as ErD_x^2 +. Field evaporation of both clean and deuterated Er films shows signs of space charge induced field lowering when film thicknesses exceeding ~ 10 layers were field evaporated using 20 ns duration voltage pulses.     

A Selective Fluorescent Sensor for Hg2+

A novel rhodamine based fluorescent chemosensor RQP was prepared and characterized by ¹HNMR, ¹³CNMR and HR-MS. The properties of RQP were studied through UV–Vis spectroscopy and fluorescence spectroscopy. RQP showed highly selectivity toward Hg²⁺ over other metal ions, including Ag⁺, Cd²⁺, Cu²⁺, Na⁺, Mg²⁺, Ni²⁺, Pb²⁺, Fe³⁺, and Zn²⁺ in aqueous solutions. The recognition process is reversible and confirmed by EDTA experiment.