FTIR and FTRaman spectra,assignments, ab initio HF and DFT analysis of 4-nitrotoluene

In this work, the experimental and theoretical study on molecular structure and vibrational spectra of 4-nitrotoluene are studied. The FTIR and FTRaman experimental spectra of the molecule have been recorded in the range of 4000–100 cm^?1. Making use of the recorded data, the complete vibrational assignments are made and analysis of the observed fundamental bands of molecule is carried out. The experimental determinations of vibrational frequencies are compared with those obtained theoretically from ab initio HF and DFT quantum mechanical calculations using HF/6-31G (d, p), B3LYP/6-31++G* (d, p) and B3LYP/6-311++G* (d, p) methods. The differences between the observed and scaled wave number values of most of the fundamentals are very small in B3LYP than HF. The geometries and normal modes of vibrations obtained from ab initio HF and B3LYP calculations are in good agreement with the experimentally observed data. Comparison of the simulated spectra provides important information about the ability of the computational method (B3LYP) to describe the vibrational modes. The vibrations of NO₂ and CH₃ groups coupled with skeletal vibrations are also investigated.     

Molecular structure, vibrational spectra and NBO analysis of phenylisothiocyanate by density functional method

The molecular geometry, vibrational frequencies and NBO analysis of phenylisothiocyanate (PITC) in the ground state have been calculated by using density functional theory calculation (B3LYP) with 6-311++G(d,p) basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with experimental values. Comparison of the observed fundamental vibrational frequencies of the PITC and calculated result by density functional theory (B3LYP) indicates B3LYP is superior for molecular vibrational problems. The entropy of the title compound was also performed at HF/B3LYP/6-311++G(d,p) levels of theory. Natural bond orbital (NBO) analysis of title molecule is also carried out. A detailed interpretation of the IR and Raman spectra of PITC is reported on the basis of the calculated potential energy distribution (PED). The theoretical spectrogram for IR spectrum of the title molecule has been constructed.     

Experimental (FT-IR and FT-Raman), electronic structure and DFT studies on 1-methoxynaphthalene

In this work, FT-IR and FT-Raman spectra of 1-methoxynapthalene (C(11)H(10)O) have been reported in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. Density functional method (DFT) has been used to calculate the optimized geometrical parameters, atomic charges, vibrational wavenumbers and intensity of the vibrational bands. The vibrational frequencies have been calculated and scaled values are compared with experimental FT-IR and FT-Raman spectra. The structure optimizations and normal coordinate force field calculations are based on density functional theory (DFT) method with B3LYP/3-21G, B3LYP/6-31G, B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p) basis sets. The complete vibrational assignments of wavenumbers are made on the basis of potential energy distribution (PED). The optimized geometric parameters are compared with experimental values of naphthoic acid. The results of the calculation shows excellent agreement between experimental and calculated frequencies in B3LYP/6-311++G(d,p) basis set. The effects due to the substitutions of methyl group and carbon-oxygen bond are also investigated. A study on the electronic properties, such as excitation energies and wavelengths, were performed by time-dependent DFT (TD-DFT) approach. HOMO and LUMO energies are calculated that these energies show charge transfer occurs within the molecule.     

HF and DFT studies and vibrational spectra of 1,2-bis(2-pyridyl)ethylene and its zinc (II) halide complexes

Ab initio restricted Hartree–Fock and density function theory calculations using BLYP, B3LYP and B3PW91 functionals were carried out to study molecular structure and vibrational spectrum of 1,2-bis(2-pyridyl)ethylene (which is abbreviated as bpe). Comparison of calculated and experimental results indicates the density functional B3LYP and BLYP/6-311G* methods are more accurate in predicting fundamental vibrational frequencies than the scaled other approaches. On the basis of calculated results, assignment of fundamental vibrational modes of bpe was proposed. Complexes of the type Zn(bpe)X₂ [where X = Cl, Br, I] have been studied in the 4000–400 cm⁻¹ region, and assignments of all the observed bands were made. The analysis of the infrared spectra indicates that there is some structure-spectra correlations.     

Infrared and Raman spectra,DFT investigation of the tautomerism,conformational equilibrium,structure and vibrational assignment of 1-(2-benzothiazolyl)-3-methyl pyrazol-5-one

The low energy conformations of the three tautomers, imine-enol, enamine-keto and imine-keto forms of the title compound have been determined at the B3LYP/6-31 + G(d) level of theory using the relaxed PES scan method and their geometries have been refined at B3LYP/6-311 + G(d,p) and PBE0/6-311 + G(d,p) levels. The results show that the title compound exists in the imine-enol tautomeric form, in contrast to the enamine-keto form which exists in the solid crystalline state, followed by enamine-keto and imine-keto forms with extremely low abundances. The geometry parameters of all tautomeric forms calculated at PBE0/6-311 + G(d,p) and B3LYP/6-311 + G(d,p) levels have been compared with those from the experimental X-ray diffraction. The vibrational (FT-IR and Raman) spectroscopic studies of the most stable tautomer, enamine-keto form have been carried out. The assignment of the fundamental bands observed in the IR and Raman spectra have been facilitated by the SQM force field procedure. The frequencies from SQM procedure have a very good fit to the experimental ones. The total root-mean-square error is only ca. 11 cm⁻¹.     

Molecular structure and vibrational assignment of 2-,4-,6-methylquinoline by density functional theory (DFT) and ab initio Hartree-Fock (HF) calculations

The molecular geometry, the normal mode frequencies and corresponding vibrational assignments of 2-,4-,6-methylquinoline (2-,4-,6-mq) in the ground state were performed by HF and DFT/B3LYP levels of theory using the 6-31++G(d,p) basis set. Harmonic and anharmonic vibrational frequencies were calculated. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method by using parallel quantum mechanic solutions program. The general agreements between the observed and calculated frequencies are shown.     

FT-IR and FT-Raman spectroscopic investigation, computed vibrational frequency analysis and IR intensity and Raman activity peak resemblance analysis on 2-nitroanisole using HF and DFT (B3LYP and B3PW91) calculations

Fourier-transform Raman and infrared spectra of 2-nitroanisole are recorded (4000-100 cm(-1)) and interpreted by comparison with respective theoretical spectra calculated using HF and DFT method. The geometrical parameters with C(S) symmetry, harmonic vibrational frequencies, infrared and Raman scattering intensities are determined using HF/6-311++G (d, p), B3LYP/6-311+G (d, p), B3LYP/6-311++G (d, p) and B3PW91/6-311++G (d, p) level of theories. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The results of the calculations have been used to simulate IR and Raman spectra for the molecule that showed good agreement with the observed spectra. The SQM method, which implies multiple scaling of the DFT force fields has been shown superior to the uniform scaling approach. The vibrational frequencies and the infrared intensities of the C-H modes involved in back-donation and conjugation are also investigated.     

FT-IR, FT-Raman spectra and quantum chemical calculations of some chloro substituted phenoxy acetic acids

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of o-chlorophenoxy acetic acid (OCPAA) and p-chlorophenoxy acetic acids (PCPAA). The FT-IR and Fourier transform-Raman spectra of both the compounds was recorded in the solid phase. The optimized geometry was calculated by HF and B3LYP methods with 6-311++G(d,p) basis set and harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by density functional B3LYP method with the 6-311++G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compounds were also performed at B3LYP/6-311++G(d,p) level of theory. A detailed interpretation of the infrared and Raman spectra of o-chloro and p-chlorophenoxy acetic acid is reported. The theoretical FT-IR spectrograms for the title molecules have been constructed.     

Quantum chemical studies of FT-IR and Raman spectra of methyl 2,5-dichlorobenzoate

In this paper, experimental and theoretical studies on the molecular structure and vibrational spectra of methyl 2,5-dichlorobenzoate (MDCB) are presented. Fourier transform infrared and Raman spectra of the title molecule in the solid phase were recorded and analyzed. The geometrical parameters were calculated using DFT (B3LYP) with 6-311G(d,p) and 6-311++G(d,p) basis sets, and compared with the experimental data. The vibrational frequencies, infrared intensities and Raman scattering activities were also reported. The detailed assignments were given based on the total energy distribution of the vibrational modes, calculated with scaled quantum mechanics method. The observed and calculated frequencies are found to be in good agreement.     

FT-IR,FT-Raman,NMR spectra and DFT calculations on 4-chloro-N-methylaniline

In this work, the vibrational spectral analysis was carried out by using FT-IR and FT-Raman spectroscopy in the range 400–4000 and 50–3500 cm^?1 respectively, for the title molecule. The structural and spectroscopic data of the molecule in the ground state were calculated by using density functional method using 6-311++G(d,p) basis set. The vibrational frequencies were calculated and scaled values were compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments of all the vibrational mode were performed on the basis of the total energy distributions (TED). ¹³C and ¹H NMR chemical shifts results were given and are in agreement with the corresponding experimental values. The theoretically constructed FT-IR and FT-Raman spectra exactly coincides with experimental one.     

FT-IR, FT-Raman vibrational spectra and molecular structure investigation of 2-chloro-4-methylaniline: A combined experimental and theoretical study

In this work, the experimental and theoretical vibrational spectra of 2-chloro-4-methylaniline (2Cl4MA, C₇H₈NCl) were studied. FT-IR and FT-Raman spectra of 2Cl4MA in the liquid phase have been recorded in the region 4000–400 cm⁻¹ and 3500–50 cm⁻¹, respectively. The structural and spectroscopic data of the molecule in the ground state have been calculated by using Hartree-Fock (HF) and density functional method (B3LYP) with the 6-31G(d), 6-31G(d,p), 6-31+G(d,p), 6-31++G(d,p) and 6-311G(d), 6-311G(d,p), 6-311+G(d,p), 6-311++G(d,p) basis sets. The vibrational frequencies have been calculated and scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The DFT-B3LYP/6-311++G(d,p) calculations have been found more reliable than the ab initio HF/6-311++G(d,p) calculations for the vibrational study of 2Cl4MA. The optimized geometric parameters (bond lengths and bond angles) were compared with experimental values of aniline and p-methylaniline molecules.     

去氢抗坏血酸分子振动光谱的理论研究

采用RHF, MP2, DFT(B3LYP)方法, 以6-311++G**为基组研究了去氢抗坏血酸分子(DHA)的平衡几何构型和振动光谱. 计算结果表明, 采用RHF, B3LYP以及MP2 方法优化得到的几何结构以及频率值是一致的. 采用B3LYP/6-311++G**计算了DHA分子平衡构型下的谐振动力场﹑振动频率和振动强度. 使用Wilson的GF矩阵方法对DHA分子进行了简正坐标分析, 依据所得的势能分布对DHA分子的振动基频进行了合理的理论归属.     

Molecular structure and vibrational analysis of 3-Ethylpyridine using ab initio HF and density functional theory (B3LYP) calculations

The FT-Raman and FT-IR spectra for 3-Ethylpyridine (3-EP) have been recorded in the region 4000-100 cm(-1) and compared with the harmonic vibrational frequencies calculated using HF/DFT (B3LYP) method by employing 6-31G(d,p) and 6-311++G(d,p) basis set with appropriate scale factors. IR intensities and Raman activities are also calculated by HF and DFT (B3LYP) methods. Optimized geometries of the molecule have been interpreted and compared with the reported experimental values of some substituted benzene. The experimental geometrical parameters show satisfactory agreement with the theoretical prediction from HF and DFT. The scaled vibrational frequencies at B3LYP/6-311++G(d,p) seem to coincide with the experimentally observed values with acceptable deviations. The theoretical spectrograms (IR and Raman) have been constructed and compared with the experimental FT-IR and FT-Raman spectra. Some of the vibrational frequencies of the pyridine are effected upon profusely with the C2H5 substitutions in comparison to pyridine and these differences are interpreted.     

FT-IR and FT-Raman investigation, computed vibrational intensity analysis and computed vibrational frequency analysis on m-Xylol using ab-initio HF and DFT calculations

The FT-IR and FT-Raman spectra of m-Xylol molecule have been recorded using Bruker IFS 66V spectrometer in the range 4000-100cm(-1). The molecular geometry and vibrational frequencies in the ground state are evaluated using the Hartree-fock (HF) and B3LYP with 6-31+G (d, p), 6-31++G (d, p) and 6-311++G (d, p) basis sets. The computed frequencies are scaled using a suitable scale factors to yield good agreement with the observed values. The HF and DFT analysis agree well with experimental observations. Comparison of the fundamental vibrational frequencies with calculated results by HF and B3LYP methods indicate that B3LYP/6-311++G (d, p) is superior to HF/6-31+G (d, p) for molecular vibrational problems. The complete data of this title compound provide some useful information for the study of substituted benzenes. The influences of Methyl groups on the geometry of benzene and its normal modes of vibrations have also been discussed.     

Density functional theory study on the structure and vibrational frequencies of glycylglycine

Eleven possible conformers of glycylglycine have been studied by using the BLYP, B3LYP methods of density functional theory and the HF method at the basis set of 6-311++G**. BLYP (using Becke's and Lee-Yang-Parr's correlation functionals), ab initio Hartree-Fock (HF) and hybrid DFT/HF B3LYP calculations have been carried out to study the structure and vibrational spectra of glycylglycine. Glycylglycine crystal structure has been determined by X-ray diffraction analysis. The title compound has been crystallizes in the orthorhombic space group C1, with Z=4. And the unit cell parameters are: a=8.1184(12)A, b=9.5542(14)A, c=7.8192(11)A and V=577.95(15)A(3). Molecular conformation calculations have got 11 possible conformers. In these possible conformers, the most stable one has been selected. The BLYP/6-311++G** and scaled HF/6-311++G** frequencies correspond well with available experimental assignments of the normal vibrational modes. Comparison of the observed fundamental vibrational frequencies of glycylglycine and calculated results by density functional B3LYP and Hartree-Fock (HF) methods indicates that B3LYP is superior to the scaled Hartree-Fock (HF) for molecular vibrational issues.     

Conformational stability, the spectroscopic (FT-IR and UV), first order hyperpolarizability, NBO analysis, HOMO and LUMO analysis of 6,8-diphenylimidazo[1,2-α]pyrazine molecule by ab initio HF and density functional methods

The conformational analysis of 6,8-diphenylimidazo[1,2-α]pyrazine molecule (abbreviated as 68DIP) was performed by using B3LYP/6-31G(d) level of theory to find the most stable form. Two staggered stable conformers were observed on the torsional potential energy surface. The equilibrium geometry, bonding features and vibrational frequencies of 68DIP have been investigated by using the DFT (B3LYP) and HF methods for the lowest energy conformer. The first order hyperpolarizability (β(total)) of this molecular system and related properties (β, μ, <α> and Δα) are calculated using HF/6-311++G(d,p) and B3LYP/6-311++G(d,p) methods based on the finite-field approach. Stability of the molecule arising from hyperconjugative interactions, charge delocalization and C-H?N intramolecular hydrogen-bond-like weak interaction has been analyzed using natural bond orbital (NBO) analysis by using B3LYP/6-311++G(d,p) method. The results show that electron density (ED) in the σ* and π* antibonding orbitals and second order delocalization energies E((2)) confirm the occurrence of intramolecular charge transfer (ICT) within the molecule. UV-vis spectrum of the compound was recorded and electronic properties, such as HOMO, LUMO energies, excitation energies and wavelength were performed by TD-DFT/B3LYP, CIS and TD-HF methods by using 6-311++G(d,p) basis set. Finally, the calculation results were applied to simulated infrared spectra of the title compound which show good agreement with observed spectra.     

FT-IR and FT-Raman vibrational spectra and molecular structure investigation of nicotinamide: A combined experimental and theoretical study

In this work, the experimental and theoretical spectra of nicotinamide (C₆H₆N₂O) are studied. FT-IR and FT-Raman spectra of title molecule in the liquid phase have been recorded in the region 4000–100 cm^?1. The structural and spectroscopic data of the molecule in the ground state have been calculated by using Hartree–Fock and density functional method (B3LYP) with the 6-31+G*(d, p) and 6-31++G* (d, p)basis set. The vibrational frequencies have been calculated and scaled values have been compared with the experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found in good agreement. The DFT-B3LYP/6-31++G (d, p) calculations have been found are more reliable than the ab initio HF/6-31+G (d, p) calculations for the vibrational study of nicotinamide. The optimized geometric parameters (bond lengths and bond angles) are compared with experimental values of the molecule. The alteration of vibrational bands due to the substitutions in the base molecule is also investigated from their characteristic region of linked spectrum.     

Trimethylsilyl trichloroacetate vibrational,structural and electronic properties and their comparison with related acetates

The molecular structure of trimethylsilyl trichloroacetate, CCl₃C(O)OSi(CH₃)₃, was determined by ab initio (MP2) and DFT calculations using 6-31G(d), 6-311G(d,p), 6-311++G(d,p) and 6-311++G(3df,3pd) basis sets. The infrared and Raman spectra for the liquid phase were also recorded and the bands observed assigned to the vibrational normal modes. The study was completed using natural bond orbital (NBO) analysis and atoms in molecules (AIM) calculations. The comparison between the calculated molecular geometrical parameters, conformation and vibrational properties and those measured for CX₃C(O)OR [X = F, Cl and R = CH₃, Si(CH₃)₃] was of particular interest in order to check the behavior of the CO and CO with respect to the different substitutions. The experimental vibrational data, along with calculated theoretical force constants, were used to define a scaled quantum mechanical force field for the target system that enabled us to estimate the measured wavenumbers with a final root-mean-square deviation of 8.92 cm⁻¹.     

1,2,4-Triazole derivative containing thiophen ring: Comparison of theoretical IR and NMR data with experimental

The molecular structure of 1,2,4-triazole containing thiophene derivative which called as ethyl-2-(4-amino-5-oxo-3-(thiophene-2-ylmethyl)-4,5-dihydro-1,2,4-triazole-1-yl) acetate (I) was optimized using DFT/B3LYP method with 6–311++G(d,p) basis set and the structural parameters of the compound were obtained. Thus, the molecular structure was compared with that identified by X-ray analysis. IR and NMR parameters were calculated by DFT/B3LYP/6–311++G(d,p) method. Theoretical vibrational frequencies and NMR chemical shift values were obtained. In addition, the molecular electrostatic potential (MEP) map was calculated. The structural and spectral data obtained from the theoretical study strongly confirm the experimental data. The compatibility of the structural parameters reveal that the choice of the method and the basis function is appropriate.