Br2+2HI=2HBr＋I2应机理的密度泛函理论

用密度泛函理论(DFT)B3LYP方法，取3-21G**基组研究了气相反应Br2＋2HI=2HBr＋I2的机理，求得一系列四中心和三中心的过渡态.双分子基元反应Br2＋HI→HBr＋IBr和IBr＋HI→I2＋HBr的活化能(81.02和121.08 kJ•mol－1)小于Br2、HI和IBr的解离能(249.21、320.16和232.42 kJ•mol－1)，故从理论上证明了标题反应将优先以分子与分子作用形式分两步完成.同时发现I原子与Br2分子反应生成较稳定的IBr2是一个无能垒过程，IBr2分解为IBr和Br原子的能垒为70.88 kJ•mol－1.     

Cl2+2HBr=2HCl+Br2反应的机理和应用

用密度泛函理论(DFT)B3LYP方法,取6-311G**基组,细致研究了反应Cl2+2HBr= 2HCl+Br2的机理,求得一系列四中心和三中心过渡态.双分子基元反应Cl₂+HBr®HCl+ BrCl和BrCl+HBr®Br₂+HCl的活化能(138.96和147.24 kJ· mol-1)小于Cl₂,HBr和BrCl的解离能,从理论上证明了标题反应将优先以分子与分子作用形式完成.将其应用于从HBr中回收溴,以Cl₂直接与HBr气体反应,生成的含溴混合气体,经冷凝并以四氯化碳吸收分离得到液溴和盐酸;溴的回收率大于96%,其含氯量小于3.0%.提供了运用基础理论解决生产中难题的成功例证.     

Cl_2 2HI=2HCl I_2反应机理的理论研究

分别在MP2/3-21G!!、CCSD(T)/3-21G!!//MP2/3-21G!!和B3LYP/3-21G!!3种水平上,计算研究了气相反应Cl2 2HI=2HCl I2的机理,求得一系列四中心和三中心的过渡态.通过比较六种反应通道的活化能大小,得到了相同的结论:双分子基元反应Cl2 HI"HCl ICl和ICl HI"I2 HCl的最小活化能小于Cl2、HI和ICl的解离能,从理论上证明了反应Cl2 2HI=2HCl I2将优先以分子与分子作用形式分两步完成.用内禀反应坐标(IRC)验证了MP2/3-21G!!方法计算得到的过渡态.     

溴代烷烃在紫外波段的光解离过程

在飞行时间质谱仪中，采用波长为234 nm和267 nm的激光，研究溴代烷烃CHBr3、CH2Br2、C2H5Br及C2H4Br2的光离解过程.在UV激光的作用下，溴代烷烃分子主要发生的是吸收1个光子解离出Br原子，然后继续吸收光子发生Br原子的（2＋1）共振增强多光子电离的过程.其中由溴代烷烃分子解离得到的Br原子可能存在着两种布居：基态Br(2P03/2)及激发态Br*(2P01/2).研究解离得到的Br原子的分支比 N(Br*)/N(Br)，并给出测量结果：溴代烷烃分子解离得到的Br原子在267 nm激光作用下的分支比明显大于在234 nm激光作用下的结果.对此多光子过程的机理，也进行了分析讨论.     

F~2+2HCl→2HF+Cl~2反应机理的密度泛函理论研究

用密度泛函理论(DFT)B3LYP方法,在6-311G^*^*基组下,计算研究了反应F~2+2HCl→2HF+Cl~2的机理。求得各可能反应途径的系列过渡态,并通过振动分析和内禀反应坐标(IRC)分析加以证实。比较反应能垒(理论计算活化能)发现,标题反应若以分子与分子作用机理进行,则需克服的最大能垒为150.63kJ.mol^-^1;若以F~2分子先裂解为F原子再反应的机理进行,则需越过能垒154.82kJ.mol^-^1,求得反应F+HCl→HF+Cl的线形和三角形两种过渡态,以三角形较稳定;求得反应HCl+Cl→H+Cl~2的两种过渡态,以线形较稳定。     

真空下X2 (X=Cl、Br)与AgOCN气-固反应机理

在真空条件下完成了X2 (X=Cl、Br)与AgOCN间的气-固异相反应，利用紫外光电子能谱（PES）仪，探测与确定反应产物是XNCO (X=Cl、Br)，并推断其可能为一过渡态反应，生成中间络合物，新键产生与旧键断裂同时进行.     

Cl_2+2HBr=2HCl+ Br_2反应的机理和应用

用密度泛函理论（ＤＦＴ）Ｂ３ＬＹＰ方法,取６－３１１ Ｇ**基组,细致研究了反应Ｃｌ２＋ ２ＨＢｒ＝ 2ＨＣｌ＋ Ｂｒ２的机理,求得一系列四中心和三中心过渡态．双分子基元反应 Ｃｌ２＋ ＨＢｒ→ ＨＣｌ＋ ＢｒＣｌ和 ＢｒＣｌ＋ ＨＢｒ → Ｂｒ２＋ ＨＣｌ的活化能（１３８．９６和 １４７．２４ ｋＪ· ｍｏｌ－１）小 于Ｃｌ-２,ＨＢｒ和ＢｒＣｌ的解离能,从理论上证明了标题反应将优先以分子与分子作用形式 完成．将其应用于从ＨＢｒ中回收溴,以Ｃｌ２直接与ＨＢｒ气体反应,生成的含溴混合气体, 经冷凝并以四氯化碳吸收分离得到液溴和盐酸;溴的回收率大于９６％,其含氟量小于 ３．０％．提供了运用基础理论解决生产中难题的成功例证．     

气相离子对SN2反应LiY+CH3Cl→CH3Y+LiCl(Y=F～I) 的密度泛函理论研究

在双分子亲核取代反应中,常见的亲核试剂是各种阴离子或中性分子.当亲核试剂是中性的离子化合物时,就有可能发生离子对SN2反应.尽管关于这种离子对SN2反应已有一些实验结果[1,2],但相应的理论研究报道仅限于少量的对称取代反应[3].本文采用密度泛函理论,在B3LYP/6-311+G(d,p)水平上对离子对SN2反应LiY+CH3Cl→CH3Y+LiCl(Y=F,Cl,Br,I)进行了计算研究,并与相应的阴离子SN2反应Y-+CH3Cl→CH3Y+Cl-(Y=F,Cl,Br,I)进行了比较,得到了一些有价值的结论,这些结论能帮助我们更深入地了解离子对SN2反应所遵循的规律.     

超分子化合物[UO2Cl4][phenH]2的合成、晶体结构、荧光性质及[UO2Cl4][phenH]2/PVA薄膜的发光性能

水热条件下合成了一种含铀的超分子化合物[UO2Cl4][phenH]2(phen=1,10-邻菲罗啉),进行了X射线单晶衍射、红外光谱、紫外光谱和荧光光谱分析。 晶体结构分析表明,该化合物由2个[phenH]+阳离子和1个阴离子[UO2Cl4]2-组成。 红外光谱和X射线单晶衍射表明,标题化合物的三维框架是由N-H…Cl、C-H…Cl和C-H…O弱氢键相互作用所构建。 中心U原子是六配位,有4个Cl原子和2个O原子。 此外,没参与配位的phen利用氢键和π…π堆积与[UO2Cl4]2-相互作用。 含U原子的阴离子是一种扭曲八面体结构。 利用溶胶-凝胶法合成了化合物的PVA薄膜。 标题化合物和薄膜均有较强的荧光性。CCDC:713149     

亲核试剂的亲卤反应2, 冠醚促进的二氟二溴甲烷与硫酚钠的反应

在苯、乙醚等溶剂中,CF_2Br_2与 PhSNa不反应或反应极慢.加入催化量的二苯并-18-冠-6,则反应在数分钟内完成,主产物 PhSCF_2Br 的产率提高至75～85%,副产物 PhSCF_2H 及 PhSSPh受到显著抑制.本体系明显优于最近文献报道的其他反应体系.讨论了反应机理,给出了表明反应主要是阴离子型链式机理的进一步证据:反应速度和产物分布对水、醇等给质子性杂质敏感,对氢原子供体型溶剂及光、氧、自由基捕获剂不敏感;在以 CCl_4为溶剂的反应中,得到 PhSCF_2Cl 和属于~-CCl_3的产物,而未检测到自由基型机理所预期的 CCl_3CCl_3.     

Studies on the Reaction Mechanism of Br2 ＋ I2 = 2IBr

1 INTRODUCTION Interhalogen compounds have played an impor- tant role in environment and chemical engineering production. During the course of ozone exhaustion induced by sunlight in polar region, Br2, BrCl and HOBr are all precursors of Br atom[1]. Lately, scien- tists have detected that the content of BrCl in polar region sunlight was 35 ppt, larger than that of Br2 (25 ppt). Previous studies suggested that the con- centration of BrCl and O3 exhibits obvious negative correlation: w…     

Investigation on the mechanism and applications of the reaction Cl_2+2HBr=2HCl+Br_2

The mechanism of reaction CI2+2HBr=2HCI+Br2 has been carefully investigated with density functional theory (DFT) at B3LYP/6-311G** level. A series of three-centred and four-centred transition states have been obtained. The activation energy (138.96 and 147.24 kJ/mol, respectively) of two bimolecular elementary reactions CI2+HBr→HCI+BrCI and BrCI+HBr→HCI+Br2 is smaller than the dissociation energy of CI2, HBr and BrCI, indicating that it is favorable for the title reaction occurring in the bimolecular form. The reaction has been applied to the chemical engineering process of recycling Br2 from HBr. Gaseous CI2 directly reacts with HBr gas, which produces gaseous mixtures containing Br2, and liquid Br2 and HCI are obtained by cooling the mixtures and further separated by absorption with CCI4. The recovery percentage of Br2 is more than 96%, and the CI2 remaining in liquid Br2 is less than 3.0%. The paper provides a good example of solving the difficult problem in chemical engineering with basic theory.     

Theoretical study and rate constant calculation for the reactions of SH (SD) with Cl2, Br2, and BrCl

The mechanisms of the SH (SD) radicals with Cl2 (R1), Br2 (R2), and BrCl (R3) are investigated theoretically, and the rate constants are calculated using a dual-level direct dynamics method. The optimized geometries and frequencies of the stationary points are calculated at the MP2/6-311G(d,p) and MPW1K/6-311G(d,p) levels. Higher-level energies are obtained at the approximate QCISD(T)/6-311++G(3df, 2pd) level using the MP2 geometries as well as by the multicoefficient correlation method based on QCISD (MC-QCISD) using the MPW1K geometries. Complexes with energies less than those of the reactants or products are located at the entrance or the exit channels of these reactions, which indicate that the reactions may proceed via an indirect mechanism. The enthalpies of formation for the species XSH/XSD (X = Cl and Br) are evaluated using hydrogenation working reactions method. By canonical variational transition-state theory (CVT), the rate constants of SH and SD radicals with Cl2, Br2, and BrCl are calculated over a wide temperature range of 200-2000 K at the a-QCISD(T)/6-311++G(3df, 2pd)//MP2/6-311G(d, p) level. Good agreement between the calculated and experimental rate constants is obtained in the measured temperature range. Our calculations show that for SH (SD) + BrCl reaction bromine abstraction (R3a or R3a') leading to the formation of BrSH (BrSD) + Cl in a barrierless process dominants the reaction with the branching ratios for channels 3a and 3a' of 99% at 298 K, which is quite different from the experimental result of k3a'/k3' = 54 +/- 10%. Negative activation energies are found at the higher level for the SH + Br2 and SH + BrCl (Br-abstraction) reactions; as a result, the rate constants show a slightly negative temperature dependence, which is consistent with the determination in the literature. The kinetic isotope effects for the three reactions are "inverse". The values of kH/kD are 0.88, 0.91, and 0.69 at room temperature, respectively, and they increase as the temperature increases.     

Cl2+2HI=2HCl+I2反应机理的理论研究

分别在MP2/3-21G**、CCSD(T)/3-21G**//MP2/3-21G**和B3LYP/3-21G**3种水平上, 计算研究了气相反应Cl₂+2HI=2HCl+I₂的机理, 求得一系列四中心和三中心的过渡态. 通过比较六种反应通道的活化能大小, 得到了相同的结论：双分子基元反应Cl₂+HIHCl+ICl和ICl+HII₂+HCl的最小活化能小于Cl₂、HI和ICl的解离能, 从理论上证明了反应Cl₂+2HI=2HCl+I₂将优先以分子与分子作用形式分两步完成. 用内禀反应坐标(IRC)验证了MP2/3-21G**方法计算得到的过渡态.     

Combined vacuum ultraviolet laser and synchrotron pulsed field ionization study of CH2BrCl

The pulsed field ionization-photoelectron (PFI-PE) spectrum of bromochloromethane (CH2BrCl) in the region of 85,320-88,200 cm-1 has been measured using vacuum ultraviolet laser. The vibrational structure resolved in the PFI-PE spectrum was assigned based on ab initio quantum chemical calculations and Franck-Condon factor predictions. At energies 0-1400 cm-1 above the adiabatic ionization energy (IE) of CH2BrCl, the Br-C-Cl bending vibration progression (nu1+=0-8) of CH2BrCl+ is well resolved and constitutes the major structure in the PFI-PE spectrum, whereas the spectrum at energies 1400-2600 cm-1 above the IE(CH2BrCl) is found to exhibit complex vibrational features, suggesting perturbation by the low lying excited CH2BrCl+(A 2A") state. The assignment of the PFI-PE vibrational bands gives the IE(CH2BrCl)=85,612.4+/-2.0 cm-1 (10.6146+/-0.0003 eV) and the bending frequencies nu1+(a1')=209.7+/-2.0 cm-1 for CH2BrCl+(X2A'). We have also examined the dissociative photoionization process, CH2BrCl+hnu-->CH2Cl++Br+e-, in the energy range of 11.36-11.57 eV using the synchrotron based PFI-PE-photoion coincidence method, yielding the 0 K threshold or appearance energy AE(CH2Cl+)=11.509+/-0.002 eV. Combining the 0 K AE(CH2Cl+) and IE(CH2BrCl) values obtained in this study, together with the known IE(CH2Cl), we have determined the 0 K bond dissociation energies (D0) for CH2Cl+-Br (0.894+/-0.002 eV) and CH2Cl-Br (2.76+/-0.01 eV). We have also performed CCSD(T, full)/complete basis set (CBS) calculations with high-level corrections for the predictions of the IE(CH2BrCl), AE(CH2Cl+), IE(CH2Cl), D0(CH2Cl+-Br), and D0(CH2Cl-Br). The comparison between the theoretical predictions and experimental determinations indicates that the CCSD(T, full)/CBS calculations with high-level corrections are highly reliable with estimated error limits of <17 meV.     

H2CO与双卤分子间卤键的电子密度分析

运用B3LYP和MP2方法在6-311++G(d,p)基组水平上, 对H2CO-XY(XY=F2、Cl2、Br2、ClF、BrF、BrCl)卤键体系进行构型全优化, 得到了O…X—Y型卤键复合物. 结果表明, MP2/6-311++G(d,p)计算结果与实验值较吻合. 并在MP2水平下计算了分子间的相互作用能, 用完全均衡校正CP(counterpoise procedure)方法对基函数重叠误差(BSSE)进行了校正. 利用电子密度拓扑分析方法对卤键复合物的电子密度拓扑性质进行了分析研究.     

New members of an old family: isolation of IC(O)Cl and IC(O)Br and evidence for the formation of weakly bound Br*...CO

The photochemically induced reactions of a dihalogen, XY, with CO isolated together in an Ar matrix at about 15 K lead to the formation of carbonyl dihalide molecules XC(O)Y, where X and Y may be the same or different halogen atoms, Cl, Br, or I. In addition to the known compounds OCCl2, OCBr2, and BrC(O)Cl, the carbonyl iodide chloride, IC(O)Cl, and carbonyl iodide bromide, IC(O)Br, compounds have thus been identified for the first time as products of the reactions involving ICl and IBr, respectively. The first product to be formed in reactions with Cl2, BrCl, or ICl is the ClCO* radical, which reacts subsequently with a second halogen atom to give the corresponding carbonyl dihalide [OCCl2, BrC(O)Cl, or IC(O)Cl]. The analogous reaction with Br2 affords, in low yield, the unusually weakly bound BrCO* radical, better described as a van der Waals complex, Br*...CO. The changes have been followed and the products characterized experimentally by their infrared spectra, and the spectra have been analyzed in light of the results afforded by ab initio (Hartree-Fock and Moeller-Plesset second-order) and density functional theory calculations.     

Addition reaction of adamantylideneadamantane with Br2 and 2Br2: a computational study

Ab initio calculations were carried out for the reaction of adamantylideneadamantane (Ad=Ad) with Br2 and 2Br2. Geometries of the reactants, transition states, intermediates, and products were optimized at HF and B3LYP levels of theory using the 6-31G(d) basis set. Energies were also obtained using single point calculations at the MP2/6-31G(d)//HF/6-31G(d), MP2/6-31G(d)//B3LYP/6-31G(d), and B3LYP/6-31+G(d)//B3LYP/6-31G(d) levels of theory. Intrinsic reaction coordinate (IRC) calculations were performed to characterize the transition states on the potential energy surface. Only one pathway was found for the reaction of Ad=Ad with one Br2 producing a bromonium/bromide ion pair. Three mechanisms for the reaction of Ad=Ad with 2Br2 were found, leading to three different structural forms of the bromonium/Br3- ion pair. Activation energies, free energies, and enthalpies of activation along with the relative stability of products for each reaction pathway were calculated. The reaction of Ad=Ad with 2Br2 was strongly favored over the reaction with only one Br2. According to B3LYP/6-31G(d) and single point calculations at MP2, the most stable bromonium/Br3- ion pair would form spontaneously. The most stable of the three bromonium/Br3- ion pairs has a structure very similar to the observed X-ray structure. Free energies of activation and relative stabilities of reactants and products in CCl4 and CH2ClCH2Cl were also calculated with PCM using the united atom (UA0) cavity model and, in general, results similar to the gas phase were obtained. An optimized structure for the trans-1,2-dibromo product was also found at all levels of theory both in gas phase and in solution, but no transition state leading to the trans-1,2-dibromo product was obtained.