Reactions of nitrogen oxides with heme models. Spectral and kinetic study of nitric oxide reactions with solid and solute Fe(III)(TPP)(NO3)

The reaction(s) of nitric oxide (nitrogen monoxide) gas with sublimed layers containing the nitrato iron(III) complex Fe(III)(TPP)(eta(2)-O(2)NO) (1, TPP = meso-tetraphenyl porphyrinate(2)(-)) leads to formation of several iron porphyrin species that are ligated by various nitrogen oxides. The eventual products of these low-temperature solid-state reactions are the nitrosyl complex Fe(TPP)(NO), the nitro-nitrosyl complex Fe(TPP)(NO(2))(NO), and 1 itself, and the relative final quantities of these were functions of the NO partial pressure. It is particularly notable that isotope labeling experiments show that the nitrato product is not simply unreacted 1 but is the result of a series of transformations taking place in the layered material. Thus, the nitrato complex formed from solid Fe(TPP)(eta(2)-O(2)NO) maintained under a (15)NO atmosphere was found to be the labeled analogue Fe(TPP)(eta(2)-O(2)(15)NO). The reactivities of the layered solids are compared to the behaviors of the same species in ambient temperature solutions. To interpret the reactions of the labeled nitrogen oxides, the potential exchange reactions between N(2)O(3) and (15)NO were examined, and complete isotope scrambling was observed between these species under the reaction conditions (T = 140 K). Overall it was concluded from isotope labeling experiments that the sequence of reactions is initiated by reaction of 1 with NO to give the nitrato nitrosyl complex Fe(TPP)(eta(1)-ONO(2))(NO) (2) as an intermediate. This is followed by a reaction in the presence of excess NO that is equivalent to the loss of the nitrate radical NO(3)(*)( )()to give Fe(TPP)(NO) as another transient species. A plausible pathway involving NO attack on the coordinated nitrate of 2 resulting in the release of N(2)O(4) concerted with electron transfer to the metal center is proposed.     

Reaction of an oxoiron(IV) complex with nitrogen monoxide: oxygen atom or oxide(•1-) ion transfer?

Reaction of [FeO(tmc)(OAc)](+) with the free radical nitrogen monoxide afforded a mixture of two Fe(II) complexes, [Fe(tmc)(OAc)](+) and [Fe(tmc)(ONO)](+) (where tmc = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane and AcO(-) = acetate anion). The amount of nitrite produced in this reaction (ca. 1 equiv with respect to Fe) was determined by ESI mass spectrometry after addition of (15)N-enriched NaNO(2). In contrast to oxygen atom transfer to PPh(3), the NO reaction of [FeO(tmc)(OAc)](+) proceeds through an Fe(III) intermediate that was identified by UV-vis-NIR spectroscopy and ESI mass spectrometry and whose decay is dependent on the concentration of methanol. The observations are consistent with a mechanism involving oxide(?1-) ion transfer from [FeO(tmc)(OAc)](+) to NO to form an Fe(III) complex and NO(2)(-), followed by reduction of the Fe(III) complex. Competitive binding of AcO(-) and NO(2)(-) to Fe(II) then leads to an equilibrium mixture of two Fe(II)(tmc) complexes. Evidence for the incorporation of oxygen from the oxoiron(IV) complex into NO(2)(-) was obtained from an (18)O-labeling experiment. The reported reaction serves as a synthetic example of the NO reactivity of biological oxoiron(IV) species, which has been proposed to have physiological functions such as inhibition of oxidative damage, enhancement of peroxidase activity, and NO scavenging.     

Reactions of meso-hydroxyhemes with carbon monoxide and reducing agents in search of the elusive species responsible for the g = 2.006 resonance of carbon monoxide-treated heme oxygenase. Isolation of diamagnetic iron(II) complexes of octaethyl-meso-hydroxyporphyrin

To examine possible models for the g = 2.006 resonance seen when the hydroxylated heme-heme oxygenase complex in the Fe(III) state is treated with CO, the reactivities of CO and reducing agents with (py)(2)Fe(III)(OEPO) and [Fe(III)(OEPO)](2) (OEPO is the trianion of octaethyl-meso-hydroxyporphyrin) have been examined. A pyridine solution of (py)(2)Fe(III)(OEPO) reacts in a matter of minutes with zinc amalgam (or with hydrazine) under an atmosphere of dioxygen-free dinitrogen to produce bright-red (py)(2)Fe(II)(OEPOH).2py.0.33H(2)O, which has been isolated in crystalline form. The (1)H NMR spectrum of (py)(2)Fe(II)(OEPOH) in a pyridine-d(5) solution is indicative of the presence of a diamagnetic compound, and no EPR resonance was observed for this compound. Treatment of a solution of (py)(2)Fe(II)(OEPOH) in pyridine-d(5) with carbon monoxide produces spectral changes after a 30 s exposure that are indicative of the formation of diamagnetic (OC)(py)Fe(II)(OEPOH). Treatment of a green pyridine solution of (py)(2)Fe(III)(OEPO) with carbon monoxide reveals a slow color change to deep red over a 16 h period. Although a resonance at g = 2.006 was observed in the EPR spectrum of the sample during the reaction, the isolated product is EPR silent. The spectroscopic features of the final solution are identical to those of a solution formed by treating (py)(2)Fe(II)(OEPOH) with carbon monoxide. Addition of hydrazine to solutions of (OC)(py)Fe(II)(OEPOH) produces red, diamagnetic (OC)(N(2)H(4))Fe(II)(OEPOH).py in crystalline form. The X-ray crystal structures of (py)(2)Fe(II)(OEPOH).2py.0.33H(2)O and (OC)(N(2)H(4))Fe(II)(OEPOH).py have been determined. Solutions of diamagnetic (OC)(N(2)H(4))Fe(II)(OEPOH).py and (OC)(py)Fe(II)(OEPOH) are extremely air sensitive and are immediately converted in a pyridine solution into paramagnetic (py)(2)Fe(III)(OEPO) in the presence of dioxygen.     

Modellkomplexe des nickels für die umsetzung von alkinen mit kohlenmonoxid: (phenylacetylen und (bipy)Ni(CO)2)

A five-coordinate, ligand-stabilised alkynenickel carbonyl complex (III), in which bond formation between carbon monoxide and the alkyne does not occur, is formed by reaction of (bipy)ni(CO)₂ (I) with phenylacetylene. The products (V and VII) from the reactions of III with carbon monoxide or t-butylisonitrile are described and characterised. A reaction scheme for the nickel-induced CC-bond formation between alkynes and carbon monoxide is discussed.     

Simultaneous kinetic determination of Fe(III) and Fe(II) by H-point standard addition method

The H-point standard addition method (HPSAM) was applied to kinetic data for simultaneous determination of Fe(III) and Fe(II) or selective determination of Fe(III) in the presence of Fe(II). The method is based on the difference in the rate of two processes; reduction of Fe(III) with Co(II) and subsequent complex formation of resulted Fe(II) with 1,10-phenanthroline, and direct complex formation between Fe(II) and 1,10-phenanthroline in pH 3 and cetyl trimethyl ammonium bromide, CTAB, micellar media. Fe(III) can be determined in the range of 0.75-5.13 mug ml(-1)with satisfactory accuracy and precision in the presence of excess Fe(II) under working conditions. The proposed method was successfully applied to the simultaneous determination of Fe(III) and Fe(II) and also to the selective determination of Fe(III) in the presence of Fe(II) in several synthetic mixtures containing different concentration ratios of Fe(III) to Fe(II).     

Interfacial aggregate growth process of Fe(II) and Fe(III) complexes with pyridylazophenol in solvent extraction system

The complexation mechanism and aggregate formation of bis[2-(5-bromo-2-pyridylazo)-5-diethylaminophenolate] iron(II) and iron(III) complexes at the heptane-water interface were studied spectrophotometrically by the high-speed stirring method and the centrifugal liquid membrane method. Furthermore, the reduction process of the Fe(III) complex with ascorbic acid at the interface was spectrophotometrically observed. The chemical compositions of the interfacial aggregate of complexes have been proved by the X-ray photoelectron spectroscopy. The aggregation of the complex at the interface was observed as a red-shifted, very strong and narrower absorption band with respect to the absorption band of the monomer complex. The aggregate of Fe(III) complex showed more shifted spectrum than that of Fe(II) complex, which proposed the larger aggregation number of Fe(III) aggregate (n = 8) than that of Fe(II) aggregate (n = 3). The obtained rate constants of interfacial aggregation were smaller than rate constants of interfacial monomer complexation, because the formation of aggregate required the assembly of the monomers.     

Carrier-facilitated bulk liquid membrane transport of iron(III)-siderophore complexes utilizing first coordination sphere recognition

Carrier-facilitated bulk liquid membrane (BLM) transport from an aqueous source phase through a chloroform membrane phase to an aqueous receiving phase was studied for various hydrophilic synthetic and naturally occurring Fe(III)-siderophore complexes using first coordination sphere recognition. Iron transport systems were designed such that two cis coordination sites on a hydrophilic Fe(III) complex are occupied by labile aquo ligands, while the other four coordination sites are blocked by strong tetradentate ligands (siderophores). The labile aquo coordination sites can be "recognized" by a liquid membrane-bound hydrophobic bidentate ligand, which carries the hydrophilic Fe(III)-siderophore complex across the hydrophobic membrane to an aqueous receiving phase. The system is further designed for uphill transport of Fe(III) against a concentration gradient, driven by anti-port H(+) transport. Three tetradentate siderophore and siderophore mimic ligands were investigated: rhodotorulic acid (H(2)L(RA)), alcaligin (H(2)L(AG)), and N,N'-dihydroxy-N,N'-dimethyldecanediamide (H(2)L(8)). Flux values for the transport of Fe(L(x))(OH(2))(2)(+) (x = RA, AG, 8) facilitated by the hydrophobic lauroyl hydroxamic acid (HLHA) membrane carrier were the highest when x = 8, which is attributed to substrate lipophilicity. Ferrioxamine B (FeHDFB(+)) was also selectively transported through a BLM by HLHA. The process involves partial dechelation of ferrioxamine B to produce the tetradentate form of the complex (Fe(H(2)DFB)(OH(2))(2)(2+)), followed by ternary complex formation with HLHA (Fe(H(2)DFB)(LHA)(+)) and transport across the membrane into the receiving phase. Uphill transport of ferrioxamine B was confirmed by increased flux as [H(+)](source phase) < [H(+)](receiving phase). The membrane flux of ferrioxamine B occurs near neutral pH, as evidence that ternary complex formation and ligand exchange are viable processes at the membrane/receptor surface of microbial cells.     

Sorption of selenite onto chlorite considering mineral dissolution

In this study we investigated the sorption of selenite (SeO₃ ^2?) onto chlorite as a function of Se(IV) concentration, pH, and ionic strength. The sorption isotherm of Se(IV) onto chlorite was successfully presented by both the Langmuir isotherm and Tempkin equation although the Langmuir isotherm is somewhat better than the Tempkin equation. The sorption of Se(IV) onto chlorite was maintained to be constant at an acidic pH region, while the sorption decreased with an increasing pH at neutral and alkaline pH regions. However, the Se(IV) sorption onto chlorite was independent of the ionic strength of NaClO₄ solution. The amount of Se(IV) sorbed onto chlorite was significantly low compared to those of iron oxides such as apatite, goethite, hematite, and magnetite because of the lower content of Fe. We also investigated the effect of Fe(II) ions dissolved from chlorite on the Se(IV) sorption as a function of contact time. The chemical oxidation states of selenium sorbed onto chlorite surface were identified using X-ray absorption near edge structure (XANES) at the Pohang synchrotron light source. The amount of Fe(II) dissolved was increased by the contact time of 28 days but decreased after 28–56 days although the amount of dissolved Fe(II) ions was significantly small. This decrease of the dissolved Fe(II) may be due to the formation of Fe-oxyhydroxides such as ferrihydrite. The results of XANES measurements also showed that the Se(IV) sorbed onto chlorite was not reduced into Se(0) or Se(-II) even in the presence of Fe(II) ions in the solution because of the low Fe content of the chlorite although the mechanism was not clearly understood.     

Photocatalytic reaction by Fe(III)–citrate complex and its effect on the photodegradation of atrazine in aqueous solution

The photodegradation of atrazine in aqueous solutions containing citrate and Fe(III) was studied under Xe lamp irradiation on a time scale of hours. It was found that the presence of Fe(III)–citrate complex enhanced the photodegradation rate of atrazine as a result of OH attack. Atrazine photodegradation followed first-order reaction kinetics and the rate depended upon pH and light intensity. High citrate concentrations led to increased photodegradation of atrazine due to the fact that citrate not only acted as a carboxylate ligand but also a reductant of Fe(III). The interaction of Fe(III) with citrate was characterized using UV–visible absorption and Fourier-transform infrared (FTIR) spectroscopy, indicating that the hydrogen ions on the carboxyl groups were exchanged for Fe(III) ions. On the basis of these results, a reaction scheme was proposed in which the cycling of iron and carbon, the depletion of citrate and O₂, and the formation of reactive oxygen species (ROS) were involved.     

Mechanistic studies on the reactions of cyanide with a water-soluble Fe(III) porphyrin and their effect on the binding of NO

The reaction of the water-soluble Fe(III)(TMPS) porphyrin with CN(-) in basic solution leads to the stepwise formation of Fe(III)(TMPS)(CN)(H(2)O) and Fe(III)(TMPS)(CN)(2). The kinetics of the reaction of CN(-) with Fe(III)(TMPS)(CN)(H(2)O) was studied as a function of temperature and pressure. The positive value of the activation volume for the formation of Fe(III)(TMPS)(CN)(2) is consistent with the operation of a dissociatively activated mechanism and confirms the six-coordinate nature of the monocyano complex. A good agreement between the rate constants at pH 8 and 9 for the formation of the dicyano complex implies the presence of water in the axial position trans to coordinated cyanide in the monocyano complex and eliminates the existence of Fe(III)(TMPS)(CN)(OH) under the selected reaction conditions. Both Fe(III)(TMPS)(CN)(H(2)O) and Fe(III)(TMPS)(CN)(2) bind nitric oxide (NO) to form the same nitrosyl complex, namely, Fe(II)(TMPS)(CN)(NO(+)). Kinetic studies indicate that nitrosylation of Fe(III)(TMPS)(CN)(2) follows a limiting dissociative mechanism that is supported by the independence of the observed rate constant on [NO] at an appropriately high excess of NO, and the positive values of both the activation parameters ΔS(?) and ΔV(?) found for the reaction under such conditions. The relatively small first-order rate constant for NO binding, namely, (1.54 ± 0.01) × 10(-2) s(-1), correlates with the rate constant for CN(-) release from the Fe(III)(TMPS)(CN)(2) complex, namely, (1.3 ± 0.2) × 10(-2) s(-1) at 20 °C, and supports the proposed nitrosylation mechanism.     

Synthesis and reactivity studies of a manganese 'microperoxidase' containing b-type heme

Mn(III)protoporphyrin IX-6(7)-gly-gly-his methyl ester (MnGGH) has been prepared by condensation of glycyl-glycyl-L-histidine methyl ester with the propionic side chains of Mn(III)protoporphyrin IX. It was characterised by mass spectrometry and UV/VIS spectroscopy. Stopped-flow spectrophotometry was used to study the reaction of the Mn 'microperoxidase' with hydrogen peroxide. The formation of active intermediates analogous to previously described metal-hydroperoxo (compound 0) and metal-oxo (compound I) intermediates of the 'natural' Fe(III) microperoxidase-8 and Mn(III) microperoxidase-8 was observed. The rate of formation of the MnGGH-based compound I analogue was found to increase dramatically with increasing pH. A steady-state kinetic analysis of the catalytic peroxidase activity of MnGGH towards K4[Fe(CN)6], L-tyrosine methyl ester, o-dianisidine, o-methoxyphenol and ascorbic acid showed that the peroxidase reaction proceeds via the formation of a microperoxidase-substrate complex followed by electron transfer from the substrate to the metal. The reactivity of MnGGH depends on the size and hydrophobicity of the substrate, and these properties appear to influence the rate of the electron transfer, which is the rate-limiting step for the whole process. MnGGH showed higher reactivity towards reducing substrates than its Fe(iii) analogue.     

S-oxygenation of thiocarbamides I: Oxidation of phenylthiourea by chlorite in acidic media

The oxidation of 1-phenyl-2-thiourea (PTU) by chlorite was studied in aqueous acidic media. The reaction is extremely complex with reaction dynamics strongly influenced by the pH of reaction medium. In excess chlorite concentrations the reaction stoichiometry involves the complete desulfurization of PTU to yield a urea residue and sulfate: 2ClO2- + PhN(H)CSNH2 + H2O --> SO4(2-) + PhN(H)CONH2 + 2Cl- + 2H+. In excess PTU, mixtures of sulfinic and sulfonic acids are formed. The reaction was followed spectrophotometrically by observing the formation of chlorine dioxide which is formed from the reaction of the reactive intermediate HOCl and chlorite: 2ClO2- + HOCl + H+ --> 2ClO2(aq) + Cl- + H2O. The complexity of the ClO2- - PTU reaction arises from the fact that the reaction of ClO2 with PTU is slow enough to allow the accumulation of ClO2 in the presence of PTU. Hence the formation of ClO2 was observed to be oligooscillatory with transient formation of ClO2 even in conditions of excess oxidant. The reaction showed complex acid dependence with acid catalysis in pH conditions higher than pKa of HClO2 and acid retardation in pH conditions of less than 2.0. The rate of oxidation of PTU was given by -d[PTU]/dt = k1[ClO2-][PTU] + k2[HClO2][PTU] with the rate law: -d[PTU]/dt = [Cl(III)](T)[PTU]0/K(a1) + [H+] [k1K(a1) + k2[H+]]; where [Cl(III)]T is the sum of chlorite and chlorous acid and K(a1) is the acid dissociation constant for chlorous acid. The following bimolecular rate constants were evaluated; k1 = 31.5+/-2.3 M(-1) s(-1) and k2 = 114+/-7 M(-1) s(-1). The direct reaction of ClO2 with PTU was autocatalytic in low acid concentrations with a stoichiometric ratio of 8:5; 8ClO2 + 5PhN(H)CSNH2 + 9H2O --> 5SO4(2-) + 5PhN(H)CONH2 + 8Cl- + 18H+. The proposed mechanism implicates HOCl as a major intermediate whose autocatalytic production determined the observed global dynamics of the reaction. A comprehensive 29-reaction scheme is evoked to describe the complex reaction dynamics.     

Sunlight induces N epsilon-(carboxymethyl)lysine formation from glycated polylysine-iron(III) complex

Sunlight was found to strongly induce the formation of N epsilon-(carboxymethyl)lysine (CML) from glycated polylysine in the presence of Fe(III) ion. The initial step of this Fe(III)-catalyzed CML formation was noted to be similar to that of blueprint photography as was confirmed by the production of Turnbull's blue in sunlight-exposed glycated human serum albumin ferricyanide solution in the presence of Fe(III). Based on this, photoinduced oxidative C-C bond cleavage of the Amadori compound was assumed to be initiated by photochemical single electron transfer front ligand to Fe(III) in the Fe(III)-Amadori compound complex affording the Fe(II)-Amadori compound radical intermediate, which eventually yields either CML or active oxygen species. CML is thus a useful oxidative stress marker. The mechanism proposed here would explain the high accumulation of CML in lens protein and skin actinic elastosis.     

Iron analysis in atmospheric water samples by atomic absorption spectroscopy (AAS) in water–methanol

To distinguish between Fe(II) and Fe(III) species in atmospheric water samples, we have adapted an analytical procedure based on the formation of a specific complex between Fe(II) and ferrozine (FZ) on a chromatographic column. After elution of Fe(III), the Fe(II) complex is recovered with water–methanol (4:1). The possibility of trace iron measurements in this complex medium by graphite-furnace atomic-absorption spectrometry has been investigated. A simplex optimization routine was required to complete the development of the analytical method.     

A supramolecular receptor of diatomic molecules (O2, CO, NO) in aqueous solution

A per-O-methylated beta-cyclodextrin dimer, Py2CD, was conveniently prepared via two steps: the Williamson reaction of 3,5-bis(bromomethyl)pyridine and beta-cyclodextrin (beta-CD) yielding 2A,2'A-O-[3,5-pyridinediylbis(methylene)bis-beta-cyclodextrin (bisCD) followed by the O-methylation of all the hydroxy groups of the bisCD. Py2CD formed a very stable 1:1 complex (Fe(III)PCD) with [5,10,15,20-tetrakis(p-sulfonatophenyl)porphinato]iron(III) (Fe(III)TPPS) in aqueous solution. Fe(III)PCD was reduced with Na2S2O4 to afford the Fe (II)TPPS/Py2CD complex (Fe(II)PCD). Dioxygen was bound to Fe(II)PCD, the P(1/2)(O2) values being 42.4 +/- 1.6 and 176 +/- 3 Torr at 3 and 25 degrees C, respectively. The k(on)(O2) and k(off)(O2) values for the dioxygen binding were determined to be 1.3 x 10(7) M(-1) s(-1) and 3.8 x 10(3) s(-1), respectively, at 25 degrees C. Although the dioxygen adduct was not very stable (K(O2) = k(on)(O2)/k(off)(O2) = 3.4 x 10(3) M(-1)), no autoxidation of the dioxygen adduct of Fe(II)PCD to Fe(III)PCD was observed. These results suggest that the encapsulation of Fe (II)TPPS by Py2CD strictly inhibits not only the extrusion of dioxygen from the cyclodextrin cage but also the penetration of a water molecule into the cage. The carbon monoxide affinity of Fe(II)PCD was much higher than the dioxygen affinity; the P(1/2)(CO), k(on)(CO), k(off)(CO), and K(CO) values being (1.6 +/- 0.2) x 10(-2) Torr, 2.4 x 10(6) M(-1) s(-1), 4.8 x 10(-2) s(-1), and 5.0 x 10(7) M(-1), respectively, at 25 degrees C. Fe(II)PCD also bound nitric oxide. The rate of the dissociation of NO from (NO)Fe(II)PCD ((5.58 +/- 0.42) x 10(-5) s(-1)) was in good agreement with the maximum rate ((5.12 +/- 0.18) x 10(-5) s(-1)) of the oxidation of (NO)Fe(II)PCD to Fe(III)PCD and NO3(-), suggesting that the autoxidation of (NO)Fe(II)PCD proceeds through the ligand exchange between NO and O2 followed by the rapid reaction of (O2)Fe(II)PCD with released NO, affording Fe(II)PCD and the NO3(-) anion inside the cyclodextrin cage.     

Quantum mechanical/molecular mechanical study of mechanisms of heme degradation by the enzyme heme oxygenase: the strategic function of the water cluster

Heme degradation by heme oxygenase (HO) enzymes is important in maintaining iron homeostasis and prevention of oxidative stress, etc. In response to mechanistic uncertainties, we performed quantum mechanical/molecular mechanical investigations of the heme hydroxylation by HO, in the native route and with the oxygen surrogate donor H2O2. It is demonstrated that H2O2 cannot be deprotonated to yield Fe(III)OOH, and hence the surrogate reaction starts from the FeHOOH complex. The calculations show that, when starting from either Fe(III)OOH or Fe(III)HOOH, the fully concerted mechanism involving O-O bond breakage and O-C(meso) bond formation is highly disfavored. The low-energy mechanism involves a nonsynchronous, effectively concerted pathway, in which the active species undergoes first O-O bond homolysis followed by a barrier-free (small with Fe(III)HOOH) hydroxyl radical attack on the meso position of the porphyrin. During the reaction of Fe(III)HOOH, formation of the Por+*FeIV=O species, compound I, competes with heme hydroxylation, thereby reducing the efficiency of the surrogate route. All these conclusions are in accord with experimental findings (Chu, G. C.; Katakura, K.; Zhang, X.; Yoshida, T.; Ikeda-Saito, M. J. Biol. Chem. 1999, 274, 21319). The study highlights the role of the water cluster in the distal pocket in creating "function" for the enzyme; this cluster affects the O-O cleavage and the O-Cmeso formation, but more so it is responsible for the orientation of the hydroxyl radical and for the observed alpha-meso regioselectivity of hydroxylation (Ortiz de Montellano, P. R. Acc. Chem. Res. 1998, 31, 543). Differences/similarities with P450 and HRP are discussed.     

A theoretical study on the complete catalytic cycle of the hetero-Pauson-Khand-type [2+2+1] cycloaddition reaction of ketimines,carbon monoxide and ethylene catalyzed by iron carbonyl complexes

The [2+2+1] cycloaddition reaction of 1,4-diazabutadienes, carbon monoxide and ethylene catalyzed by iron carbonyl complexes produces pyrrolidin-2-one derivatives. Only one of the two imine moieties is activated during the catalysis. The mechanism of this cycloaddition reaction is studied by density functional theory at the B3LYP/6-311++G(d,p) level of theory. In accordance with experimental results, a [(diazabutadiene)Fe(CO)(3)] complex of square-pyramidal geometry is used as the starting compound S of the catalytic cycle. Based on experimental experience, the reaction with ethylene is considered to take place before any interaction with carbon monoxide. According to the computational results, the reaction does not proceed by ligand dissociation followed by addition of ethylene and subsequent intramolecular activation steps but by the approach of an ethylene molecule from the base of the square-pyramidal complex. This reaction yields an intermediate I(4) in which ethylene is coordinated to the iron centre and a new C-C bond between ethylene and one of the imine groups is formed. The insertion of a terminal carbon monoxide ligand into the metal-carbon bond between ethylene and iron produces the key intermediate I(7). The reaction proceeds by metal-assisted formation of a lactam P. The catalytic cycle is closed by a ligand-exchange reaction in which the diazabutadiene ligand substitutes P with reformation of S. This reaction pathway is found to be energetically favored over a reductive elimination. It leads to the experimentally observed heterocyclic product P and a reactive [Fe(CO)(3)] fragment.     

The effects of axial ligands on electron distribution and spin states in iron complexes of octaethyloxophlorin, intermediates in heme degradation

The results presented here show that the nature of the axial ligand can alter the distribution of electrons between the metal and the porphyrin in complexes where there is an oxygen atom replacing one of the meso protons. The complexes (1-MeIm)(2)Fe(III)(OEPO) and (2,6-xylylNC)(2)Fe(II)(OEPO(*)) (where OEPO is the trianionic octaethyloxophlorin ligand and OEPO(*) is the dianionic octaethyloxophlorin radical) were prepared by addition of an excess of the appropriate axial ligand to a slurry of [Fe(III)(OEPO)](2) in chloroform under anaerobic conditions. The magnetic moment of (2,6-xylylNC)(2)Fe(II)(OEPO(*)) is temperature invariant and consistent with a simple S = (1)/(2) ground state. This complex with an EPR resonance at g = 2.004 may be considered as a model for the free-radical like EPR signal seen when the meso-hydroxylated heme/heme oxygenase complex is treated with carbon monoxide. In contrast, the magnetic moment of (1-MeIm)(2)Fe(III)(OEPO) drops with temperature and indicates a spin-state change from an S = (5)/(2) or an admixed S = (3)/(2),(5)/(2) state at high temperatures (near room temperature) to an S = (1)/(2) state at temperatures below 100 K. X-ray diffraction studies show that each complex crystallizes in centrosymmetric form with the expected six-coordinate geometry. The structure of (1-MeIm)(2)Fe(III)(OEPO) has been determined at 90, 129, and 296 K and shows a gradual and selective lengthening of the Fe-N(axial bond). This behavior is consistent with population of a higher spin state at elevated temperatures.     

Kinetic spectrophotometric determination of Fe(II) in the presence of Fe(III) by H-point standard addition method in mixed micellar medium

The H-point standard addition method was applied to kinetic data for simultaneous determination of Fe(II) and Fe(III) or selective determination of Fe(II) in the presence of Fe(III). The method is based on the difference in the rate of complex formation between iron in two different oxidation states and methylthymol blue (MTB) at pH 3.5 in mixed cetyltrimethylammonium bromide (CTAB) and Triton X-100 micellar medium. Fe(II) can be determined in the range 0.25-2.5 microg ml(-1) with satisfactory accuracy and precision in the presence of excess Fe(III) and other metal ions that rapidly form complexes with MTB under working condition. The proposed method was successfully applied to the simultaneous determination of Fe(II) and Fe(III) or selective determination of Fe(II) in the presence of Fe(III) in spiked real environmental and synthetic samples with complex composition.     

Synthesis and magnetic properties of new mono- and binuclear iron complexes with salicyloylhydrazono dithiolane ligand

We report here experimental evidence for the formation in the solid state of a new binuclear Fe (III) 2(mu-OMe) 2(HL) 4 complex (H 2L is 2-salicyloylhydrazono-1,3-dithiolane). The isostructural Mn (III) 2(mu-OMe) 2(HL) 4 complex has provided the strongest ferromagnetic interaction value (J approximately 20 cm (-1)) between Mn (III) ions to date. The new iron binuclear compound presented in this study shows antiferromagnetic intramolecular coupling, which agrees with the theoretical study that we previously proposed. During our synthetic work, we also observed an unexpected spontaneous reduction of the new Fe (III)(HL) 2Cl,S complex to the new Fe (II)(H 2L) 2Cl 2 high-spin mononuclear complex. This process has been checked by cyclo-voltammetry as well as pseudosteady voltammetry.