Significant enhancement of crystallization kinetics of polylactide in its immiscible blends through an interfacial effect from comb-like grafted side chains

A significant enhancement in isothermal crystallization kinetics of biodegradable polylactide (PLA) in its immiscible blends can be accomplished through blending it with a comb-like copolymer. PLA was blended with poly(ethylene glycol) methyl ether acrylate (PEGA) and poly[poly(ethylene glycol) methyl ether acrylate] (PPEGA, a comb-like copolymer), respectively. The results measured from phase contrast optical microscopy (PCOM) and differential scanning calorimetry (DSC) indicate that PLA and PEGA components are miscible, whereas PLA and PPEGA components are immiscible. The study of crystallization kinetics for PLA/PEGA and PLA/PPEGA blends by means of polarized optical microscopy (POM) and DSC indicates that both PEGA and PPEGA significantly increase the PLA spherulitic growth rates, G, although PLA/PPEGA blends are immiscible and the glass transition temperatures of PLA only have slight decreases. PPEGA component enhances nucleation for PLA crystallization as compared with PEGA component owing to the heterogeneous nucleation effect of PPEGA at the low composition of 20 wt%, while PLA crystallization-induced phase separation for PLA/PEGA blend might cause further nucleation at the high composition of 50 wt%. DSC measurement further demonstrates that isothermal crystallization kinetics can be relatively more enhanced for PLA/PPEGA blends than for PLA/PEGA blends. The “abnormal” enhancement in G for PLA in its immiscible blends can be explained by local interfacial interactions through the densely grafted PEGA side chains in the comb-like PPEGA, even though the whole blend system (PLA/PPEGA blends) represents an immiscible one.     

Crystalline Morphology and Crystallization Kinetics of Melt-miscible Crystalline/Crystalline Polymer Blends of Poly（vinylidene fluoride） and Poly（butylene succinate-co-24mol% hexamethylene succinate）

Poly（vinylidene fluoride） （PVDF） and poly（butylene succinate-co-24 mol% hexamethylene succinate） （PBHS）, both crystalline polymers, formed melt-miscible crystalline/crystalline polymer blends. Both the characteristic diffraction peaks and nonisothermal melt crystallization peak of each component were found in the blends, indicating that PVDF and PBHS crystallized separately. The crystalline morphology and crystallization kinetics of each component were studied under different crystallization conditions for the PVDF/PBHS blends. Both the spherulitic growth rates and overall isothermal melt crystallization rates of blended PVDF decreased with increasing the PBHS composition and were lower than those of neat PVDF, when the crystallization temperature was above the melting point of PBHS component. The crystallization mechanism of neat and blended PVDF remained unchanged, despite changes of blend composition and crystallization temperature. The crystallization kinetics and crystalline morphology of neat and blended PBHS were further studied, when the crystallization temperature was below the melting point of PBHS component. Relative to neat PBHS, the overall crystallization rates of the blended PBHS first increased and then decreased with increasing the PVDF content in the blends, indicating that the preexisting PVDF crystals may show different effects on the nucleation and crystal growth of PBHS component in the crystalline/crystalline polymer blends.     

低密度聚乙烯/乙丙烯三元共聚(LDPE/EPO)共混体系的结晶动力学

用DSC方法研究了LDPE/EPO共混体系的等温及非等温结晶动力学,对LDPE/EPO共混体系的等温结晶动力学研究表明,共混物是三维生长的异相成核,共混物在各个结晶温度下的结晶过程都是以方式K_g(Ⅱ)进行的.采用联系Avrami方程和Ozawa方程导出的新非等温结晶动力学方程,处理了LDPE/EPO共混体系,得到了非等温结晶过程的一些基本参数,新方程很好地描述了此共混体系的非等温结晶动力学过程.     

Miscibility and transesterification in ternary blends of poly(ethylene naphthalate)/poly(trimethylene terephthalate)/poly(ether imide)

Miscibility and morphology of poly(ethylene 2,6-naphthalate)/poly(trimethylene terephthalate)/poly(ether imide) (PEN/PTT/PEI) blends were investigated by using a differential scanning calorimeter (DSC), optical microscopy (OM), wide-angle X-ray diffraction (WAXD), and proton nuclear magnetic resonance (¹H-NMR). In the ternary blends, OM and DSC results indicated immiscible properties for polyester-rich compositions of PEN/PTT/PEI blends, but all compositions of the ternary blends were phase homogeneous after heat treatment at 300 °C for more than 30 min. An amorphous blend with a single T _g was obtained in the final state, when samples were annealed at 300 °C. Experimental results from ¹H-NMR identified the production of PEN/PTT copolymers by so-called “transesterification”. The influence of transesterification on the behaviors of glass transition and crystallization was discussed in detail. Study results identified that a random copolymer promoted the miscibility of the ternary blends. The critical block lengths for both PEN and PTT hindered the formation of crystals in the ternary blends. Finally, the transesterification product of PEN/PTT blends, ENTT, was blended with PEI. The results for DSC and OM demonstrated the miscibility of the ENTT/PEI blends.     

PET/LCP反应性共混物的非等温结晶动力学

采用DSC方法研究了聚对苯二甲酸乙二酯 (PET)和热致性液晶共聚酯 6 0PHB PET (LCP)体系在少量扩链剂双 (2 唑啉 ) (BOZ)存在下形成的反应性共混物的非等温结晶动力学 .结果表明反应性共混物的Avrami指数均在 3 0～ 4 5之间 ,BOZ的加入使反应共混物中PET组分的结晶速率降低 ;表明BOZ对酯交换的促进作用 ,使所生成的共聚酯中PET嵌段的数均序列长度变短 ,而使结晶在某种程度上较为困难 ,但对体系的成核和结晶生长机理无明显影响 .结果还表明 ,随冷却速率的增大结晶峰向低温方向移动     

低乙烯含量聚丙烯共聚物结晶成核剂研究

利用ＤＳＣ和偏光显微镜等手段研究了部分成核剂对聚丙烯均聚物（ＰＰ）、低乙烯含量聚丙烯共聚物及聚丙烯／聚乙烯（ＰＰ／ＰＥ）共混物结晶行为的影响，结果表明所用成核剂对ＰＰ和改性ＰＰ具有一定的普适性。聚丙烯共聚物中，由于链结构规整性变差，成核剂的作用显得特别突出，而ＰＰ／ＰＥ共混物中，由于成核剂向ＰＥ相迁移而使其对ＰＰ结晶的成核效率降低。     

Isothermal crystallization kinetics of AB2 hyper-branched polymer (HBP)-filled polypropylene (PP)

In this paper, the isothermal crystallization kinetics of pure polypropylene (PP) and AB₂ hyper-branched polymer (HBP)/PP blends have been investigated by differential scanning calorimetry (DSC). During isothermal crystallization, the crystallization rates of the blends are higher than those of PP. Furthermore, in the blends with different HBP contents, the value of t _1/2 became smaller with increasing HBP content; however, the crystallization rate of the blend decreased slightly when the content of HBP is 5 %. An increase in the Avrami exponent means the addition of HBP influences the mechanism of nucleation and the growth of PP crystallites. In addition, the crystallization activation energy of pure PP and HBP/PP blends were also discussed, and the result showed that the crystallization activation energy has decreased remarkably in HBP/PP blends.     

CaSO_4纳米晶须对PBT-PE-液晶离聚物杂化材料形态结构与力学性能的影响

通过熔融共混法将CaSO4纳米晶须和含磺酸离子的液晶离聚物(LCI)与聚对苯二甲酸丁二醇酯-聚乙烯(PBT-PE),制成PBT-PE-LCI-CaSO4纳米晶须杂化材料。通过DSC、红外图像系统分析和拉伸试验对共混体系的热性能、形态结构和力学性能进行了研究。结果表明:在共混体系中加入LCI提高了体系中PE的结晶温度和结晶度,并且LCI包裹着CaSO4纳米晶须,分散相PE均匀地分散在PBT基体中;当基体与CaSO4纳米晶须的质量比为100∶3时,杂化材料的力学性能最好。     

Interplay between two phase transitions: crystallization and liquid-liquid phase separation in a polyolefin blend

The interplay between liquid-liquid phase separation (LLPS) and crystallization at several compositions in statistical copolymer blends of poly(ethyleneco-hexene) and poly(ethylene-cobutene) has been examined by optical microscopy (OM), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The phase contrast optical microscopy shows interconnected bicontinuous structures for deeply quenched LLPS, characteristic of spinodal decomposition. After a second quench to a temperature below the melting point, an overwhelming change in crystallization kinetics has been clearly observed, which is caused by the increase of the nucleation rate assisted by concentration fluctuations due to the spontaneous spinodal LLPS. We propose a new mechanism of "fluctuation assisted nucleation" in the crystallization process for such interactive process in a blend system. The experimental results from OM, AFM, and DSC measurements at various conditions are all consistent with the fluctuation assisted nucleation model.     

Miscibility and crystallization behavior of PBT/epoxy blends

The miscibility and the isothermal crystallization kinetics for PBT/Epoxy blends have been studied by using differential scanning calorimetry, and several kinetic analyses have been used to describe the crystallization process. The Avrami exponents n were obtained for PBT/Epoxy blends. An addition of small amount of epoxy resin (3%) leads to an increase in the number of effective nuclei, thus resulting in an increase in crystallization rate and a stronger trend of instantaneous three‐dimensional growth. For isothermal crystallization, crystallization parameter analysis showed that epoxy particles could act as effective nucleating agents, accelerating the crystallization of PBT component in the PBT/Epoxy blends. The Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT/Epoxy 97/3 had lower nucleation constant K_g than 100/0, 93/7, and 90/10 PBT/Epoxy blends. Analysis of the crystallization data of PBT/Epoxy blends showed that crystallization occurs in regime II. The fold surface free energy, σ_e = 101.7–58.0 × 10^?3 J/m², and work of chain folding, q = 5.79–3.30 kcal/mol, were determined. The equilibrium melting point depressions of PBT/Epoxy blends were observed and the Flory–Huggins interaction parameters were obtained. It indicated that these blends were thermodynamically miscible in the melt. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1320–1330, 2006     

Evaluation of the fractionated crystallization of isotactic polypropylene and high density polyethylenes in their blends with Cycloolefin copolymers

Crystallization of semi-crystalline polyolefins (i-polypropylenes and HD-polyethylenes) in their blends with amorphous cycloolefin copolymers (COC) were studied. The thermal behaviour of the blends was characterized by Differential Scanning Calorimetry (DSC) whereas blend morphologies were investigated by Scanning Electronic Microscopy (SEM). In iPP/COC blends, a phenomenon of fractionated crystallization is evidenced when i-PP is finely dispersed in the COC matrix. Such a behavior is generally observed when the number of droplets is much larger than the number of heterogeneities originally present in the bulk polymer. In HDPE/COC blends, complex morphologies are observed which do not fit good correlation with DSC results. The nucleation and crystallization modes seem to be largely influenced by the characteristics of the micro-dispersed phase, largely dependent on the PE molecular weights and polydispersity indices.     

茂金属间规立构聚丙烯结晶动力学研究

用ＤＳＣ和密度法对茂金属间规立构聚丙烯（ｓＰＰ）样品进行了等温和非等温结晶动力学研究．测得平衡熔点Ｔ０ｍ为１５８℃,平衡熔融热焓ΔＨ０ｍ为３７ｋＪ／ｍｏｌ,侧表面自由能σ＝５２ｅｒｇ／ｃｍ２,折叠链表面自由能σｅ＝６９ｅｒｇ／ｃｍ２,链堆砌功ｑ＝３３７５ｋＪ／ｍｏｌ．对非等温结晶过程研究表明,由熔体结晶的ｓＰＰ具有非均相成核,三维球状生长机理．成核与生长活化能ΔＥ＝７３１ＫＪ／ｍｏｌ     

Effect of phthalimide as an efficient nucleating agent on the crystallization kinetics of poly(lactic acid)

The effect of phthalimide compound on the nonisothermal and isothermal crystallization behavior of poly(lactic acid) (PLA) was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy. It was found that the incorporation of a small amount of phthalimide promoted the crystallization of PLA significantly. The Avrami model was applied to analyze the isothermal crystallization kinetics. It was found that the Avrami exponent was higher for PLA/phthalimide blends than for neat PLA, indicating a heterogeneous nucleation mechanism. These results indicate that phthalimide may act as an efficient nucleating agent to improve the crystallization of PLA and expand its applications.     

RPS／CPE的反应性共混及其对PS／PE的增容作用

用ＦＴＩＲ、ＤＳＣ等方法研究了含恶唑啉官能力的聚苯乙烯（ＲＰＳ）与氯化聚乙烯（ＣＰＥ）之间的反应。ＲＰＳ、ＣＰＥ、ＰＳ、ＰＥ在不同温度下用反应式挤出要熔融共辊，结果表明，ＲＰＳ／ＣＰＥ对ＰＳ／ＰＥ共混物具有增容作用，提高了共混物的力学性能。此反应性共混适宜在较低温度下进行，对ＲＰＳＣＰＥ共混物还进行了动态力学表征，并与ＲＰＳ进行比较以进一步了解共混物的特征。     

不同分子量聚L-乳酸的非等温结晶动力学研究

采用DSC方法研究了不同分子量聚乳酸在不同降温速率下的结晶过程,利用Ozawa方程和Kissinger方程研究了其非等温结晶动力学。结果表明,随着降温速率的增大和分子量增加,结晶峰向低温偏移,且峰形趋于平缓。求得分子量为2.6×104的聚乳酸的Ozawa指数m接近3,以异相成核的三维球晶生长为主,而分子量为14.3×104和19.2×104的聚乳酸的Ozawa指数m接近4,以均相成核的三维球晶生长为主,结晶活化能分别为-165.8kJ/mol、-82.1kJ/mol和-75.4kJ/mol。建立的"铰链"模型解释了不同分子量聚乳酸结晶活化能的显著差异,得到了聚乳酸分子量与结晶活化能的关系。     

电子束辐照法制备交联共混物聚(ε-己内酯)/苯乙烯-丙烯腈共聚物的结晶动力学研究

将线形聚(ε-己内酯)(PCL)、苯乙烯-丙烯腈共聚物(SAN)和三烯丙基异三聚氰酸酯(TAIC)熔融共混,通过电子束辐照法制备了3组凝胶含量不同的交联PCL和PCL/SAN共混物样品.采用相差显微镜(PCOM)观察发现PCL与SAN具有良好的相容性.利用示差扫描量热法(DSC)和偏光显微镜(POM)研究了交联PCL和PCL/SAN共混物的等温结晶动力学和非等温结晶行为.结果表明,当体系交联程度相近时,交联聚己内酯的结晶动力学随SAN含量的增加而明显减慢.在SAN含量相同时,交联聚己内酯的结晶速率随交联程度增大而减小.对分离提取的线形和交联组分进行结晶动力学的研究则表明SAN引入对PCL的结晶速率起到了关键性的抑制作用.     

聚丁二酸丁二醇酯的自成核结晶行为

利用差示扫描量热仪(DSC)研究了自成核对聚丁二酸丁二醇酯(PBS)的结晶行为的影响. 研究结果表明, PBS的有效自成核温度处理区间为118～120 ℃. PBS经自成核处理后结晶温度提高, 可以在100~118 ℃温度区间内迅速结晶. 同时, 研究了自成核处理后样品在100～104 ℃范围内的等温结晶行为、动力学过程及熔融行为. 结果表明, 随着等温结晶温度的升高, 结晶速率变慢, 熔融曲线出现多重熔融峰. Hoffman-Weeks方程分析结果表明, 自成核处理对PBS的平衡熔点没有影响. Avrami等温结晶动力学方程适合分析自成核处理样品的等温结晶动力学过程, 获得其动力学参数K与n, 其中n值偏大的原因在于自成核的样品结晶生长点增多. 根据Arrhenius方程, 计算获得PBS自成核处理后等温结晶活化能为-286 kJ/mol.     

Mutual influence of LDPE and PP in their blends during crystallization

An indication for the mutual influence of LDPE and PP was the change of the morphology parameters of PE and PP at different ratios of the polymers in blends. That influence depends on the blend composition and is different for PE and PP. It is especially interesting in the blend PE75/PP25 where the influence between PE and PP shows dependence also on the sample geometry. Melting parameters, non-isothermal crystallization parameters - crystallization peak temperature T_c, crystallization begin temperature T_onset, half-width w_1/2 of the crystallization peak, degree of crystallinity α and crystallization rate coefficient CRC, as well as the isothermal kinetics parameters showed dependence on the blend composition. It was established that PE is more stable then PP concerning the mutual influence of both polymers on their crystallization. It was established that PE affects the crystal nucleation of PP and causes a decreasing of PP spherulite size.     

Effect of nanoscale fully vulcanized acrylic rubber powders on crystallization of poly(butylene terephthalate): Isothermal crystallization

Poly(butylene terephthalate) (PBT) was blended with nanoscale fully vulcanized acrylic rubber (FVAR) powders in a twin extruder, and the FVAR powders were dispersed well in PBT from scanning electron microscopy (SEM) and transmission electron microscope (TEM) investigation. The isothermal crystallization kinetics of PBT/FVAR blends were investigated by differential scanning calorimeter (DSC) and simulated by Avrami model. Equilibrium melting temperature was estimated by the nonlinear Hoffman-Weeks relation. The active energy (ΔE) and nucleation parameters (K_g) increased with the addition of FVAR, suggesting that FVAR particles hindered the crystallization; however more content FVAR had a lower ΔE and K_g because FVAR powders acted as heterogeneous nuclei in the nucleation of crystallization and facilitated the crystallization of PBT. The crystallization ability followed the order: PBT > PBT/FVAR6 > PBT/FVAR3 > PBT/FVAR1 when undercooling was considered.     

Effect of aging on fractional crystallization of poly(ethylene oxide) component in poly(ethylene oxide)/poly(3‐hydroxybutyrate) blends

The effect of aging on the fractional crystallization of the poly(ethylene oxide) (PEO) component in the PEO/poly(3‐hydroxybutyrate) (PHB) blend has been investigated. The partial miscibility of the PEO/PHB blends with high PEO molecular weight (M_v = 2.0 × 10⁵ g/mol) was confirmed by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis. The fractional crystallization behavior of the PEO component in the PEO/PHB blends with low PEO content (not more than 30 wt% of PEO), before and after aging under vacuum at 25 °C for 6 months, were compared by DSC, fourier transform infrared microscopic spectroscopy, small angle X‐ray diffraction, and scanning electron microscopy. It was confirmed that nearly all the PEO components remain trapped within interlamellar regions of PHB for the PEO/PHB blends before aging. Under this condition, the crystallization of PEO is basically induced by much less active heterogeneities or homogeneous nucleation at high supercoolings. While, after the same PEO/PHB samples were stored at 25 °C in vacuum for 6 months, a part of the PEO component was expelled from the interlamellar region of PHB. Under this condition, the expelled PEO forms many separate domains with bigger size and crystallizes at low supercoolings by active heterogeneous nucleation, whereas the crystallization of PEO in the interlamellar region is still mainly induced by less active heterogeneities or homogeneous nucleation at extreme supercoolings. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2665–2676, 2005