Benzolignanoid and Polyphenols from Origanum Vulgare

A new dihydrobenzodioxane derivative, origalignanol ( 10 ), together with nine polyphenolic compounds, salvianolic acid A ( 1 ), salvianolic acid C ( 2 ), lithospermic acid ( 3 ), apigenin 7‐O‐β‐D‐glucuronide ( 4 ), apigenin 7‐O‐β‐D‐(6″‐methyl)glucuronide ( 5 ), luteolin, ( 6 ), luteolin 7‐O‐β‐D‐glucopyranoside ( 7 ), luteolin 7‐O‐β‐D‐glucuronide ( 8 ), and luteolin 7‐O‐β‐D‐xylopyranoside ( 9 ), were isolated from the aqueous ethanolic extract of the aerial parts of Origanum vulgare for the first time. The structure of new compound 10 was determined on the basis of spectroscopic methods. Compound 5 is probably an artifact formed during the isolation. Compounds 1, 2 and 3 showed strong DPPH radical scavenging activity with an EC₅₀ of 7.2 ± 0.4, 9.6 ± 0.9, and 9.5 ± 0.7 μM, respectively, and protected rat hepatocytes from CCl₄‐damage at 100 μM.     

Determined GA by FI‐CE in Luminol‐H2O2 System

It was found that the chemiluminescence arising from the reaction of luminol with H₂O₂ involving Co(II)‐catalyzed in alkaline solution could be strongly inhibited by gibberellic acid. Based on this observation, a new flow injection chemiluminescence method is proposed for the determination of gibberellic acid. The detection limits of the method are 0.09 ng mL^?1 gibberellic acid. The method was successfully applied to the determination of gibberellic acid in bacteria‐free culture liquid.     

Electrochemiluminescence Bioassays with a Water‐Soluble Luminol Derivative Can Outperform Fluorescence Assays

The most efficient and commonly used electrochemiluminescence (ECL) emitters are luminol, [Ru(bpy)₃]²⁺, and derivatives thereof. Luminol stands out due to its low excitation potential, but applications are limited by its insolubility under physiological conditions. The water‐soluble m‐carboxy luminol was synthesized in 15 % yield and exhibited high solubility under physiological conditions and afforded a four‐fold ECL signal increase (vs. luminol). Entrapment in DNA‐tagged liposomes enabled a DNA assay with a detection limit of 3.2 pmol L^?1, which is 150 times lower than the corresponding fluorescence approach. This remarkable sensitivity gain and the low excitation potential establish m‐carboxy luminol as a superior ECL probe with direct relevance to chemiluminescence and enzymatic bioanalytical approaches.     

A Novel Chemiluminescence Immunoassay Using Solid‐Phase Antigen for Free 17β‐Estradiol in Human Serum

A high‐performance chemiluminescence immunoassay, with long‐term durability, good precision and time‐saving, was proposed for the detection of free 17β‐estradiol (E₂) in human serum. Ninety‐six microplates were coated with bovine serum albumin conjugated E₂ antigen as solid phase for the immunoassay. The E₂‐BSA antigen coated on the microplate and the E₂ antigen in the sample competed for the binding sites on the horseradish peroxidase (HRP) labeled anti‐E₂ antibody. Chemiluminescence reaction was subsequently carried out by HRP catalyzing luminol‐H₂O₂ substrates, and the chemiluminescence intensity was inversely proportional to the amount of analyte in human sera samples. The concentration of immunoreagents, immunoreaction time, and other relevant variable conditions upon the immunoassay were studied and optimized. The proposed method exhibited detection limit as low as 5.94×10^?3 µg·L^?1 in a linear detection range from 0.01 to 1.00 µg·L^?1, good recoveries between 105% and 108%, and high precision with intra‐ and inter‐assay coefficients between 7.9% and 14.3%.     

A Multicommuted Flow‐based System for Hydrogen Peroxide Determination by Chemiluminescence Detection Using a Photodiode

Abstract

A simple, rapid, and automated assay for hydrogen peroxide in pharmaceutical samples was developed by combining the multicommutation system with a chemiluminescence (CL) detector. The detection was performed using a spiral flow‐cell reactor made from polyethylene tubing that was positioned in front of a photodiode. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. The chemiluminescence was based on the reaction of luminol with hydrogen peroxide catalyzed by hexacyanoferrate(III).

The feasibility of the flow system was ascertained by analyzing a set of pharmaceutical samples. A linear response within the range of 2.2–210 µmol l^?1 H₂O₂ with a LD of 1.8 µmol l^?1 H₂O₂ and coefficient of variations smaller than 0.8% for 1.0×10^?5 mol l^?1 and 6.8×10^?5 mol l^?1 hydrogen peroxide solutions (n=10) were obtained. Reagents consumption of 90 µg of luminol and 0.7 mg of hexacyanoferrate(III) per determination and sampling rate of 200 samples per hour were also achieved.     

Aptamer‐based detection and quantitative analysis of human immunoglobulin E in capillary electrophoresis with chemiluminescence detection

A novel aptamer‐based CE with chemiluminescence (CL) assay was developed for highly sensitive detection of human immunoglobulin E (IgE). The IgE aptamer was conjugated with gold nanoparticles (AuNPs) to form AuNPs‐aptamer that could specifically recognize the IgE to produce an AuNPs‐aptamer‐IgE complex. The mixture of the AuNPs‐aptamer‐IgE complex and the unbounded AuNPs‐aptamer could be effectively separated by CE and sensitively detected with luminol‐H₂O₂ CL system. By taking the advantage of the excellent catalytic behavior of AuNPs on luminol‐H₂O₂ CL system, the ultrasensitive detection of IgE was achieved. The detection limit of IgE is 7.6 fM (S/N = 3) with a linear range from 0.025 to 250 pM. Successful detection of IgE in human serum samples was demonstrated and the recoveries of 94.9–103.2% were obtained. The excellent assay features of the developed approach are its specificity, sensitivity, adaptability, and very small sample consumption. Our design provides a methodology model for determination of rare proteins in biological samples.     

Automated Sequential‐injection Chemiluminescence Determination of Glucosamine Sulphate via Luminol‐Hydrogen Peroxide System

A highly sensitive automated sequential‐injection chemiluminescence (SIA‐CL) method for determination of glucosamine sulphate (GLS) was developed. The goal of the present work is the evaluation of the enhancement effect of the investigated drug glucosamine sulphate on the chemiluminescence reaction between luminol and H₂O₂ in alkaline medium of 1.0 × 10^?2 mol L^?1 sodium hydroxide at pH 11. The experimental conditions affecting the CL reaction such as the sequence of the reagents, concentrations, flow rate and aspirated volumes of reactants were systematically investigated and optimized. Under optimum conditions 50 μL of 1.0 × 10^?3 mol L^?1 luminol, 30 μL of a GLS test solution and 50 μL of 1.0 × 10^?2 mol L^?1 H₂O₂ were used and the luminescing zone was pushed into the detector at a flow rate 100 μL s^?1. The proposed method recorded high sensitivity, accuracy and simplicity that could be clarified as linear concentration range 1.0‐2000 ng mL^?1 with rectilinear part (r = 0.9992, n = 9) and limit of detection 0.3 ng mL^?1, along with relative standard deviation 1.3%. It was found that the developed method can be used directly to determine the investigated drug GLS in its pharmaceutical dosage forms and in spiked serum and urine by diluting the samples for a 1000 fold. The obtained results were statistically analyzed and compared with those obtained by the reported method.     

Pt NPs catalyzed chemiluminescence method for Hg2+ detection based on a flow injection system

Establishing a simple and accurate method for Hg²⁺ detection is of great importance for the environment and human health. In this work, platinum nanoparticles (Pt NPs) with different capped agents and morphologies were synthesized. It was found that Pt NPs exhibited peroxidase‐like activity that can catalyze the chemiluminescence (CL) of the luminol system without H₂O₂. The most intensive CL signals were obtained by using PVP‐capped Pt NPs as catalysis. Based on the fact that Hg²⁺ could further enhance the CL intensity in the Pt NPs‐luminol CL system, a Pt NPs‐catalyzed CL method based on a flow injection system is developed for the sensitive analysis of Hg²⁺. When the concentration of Hg²⁺ in the system increases, the CL intensity would together increase, thereby achieving sensitive Hg²⁺ detection. The limit of detection (LOD) was calculated to be 8.6 nM. This developed method provides a simple and rapid approach for the sensitive detection of Hg²⁺ and shows great promise for applications in other complex systems.     

银（III）配合物-鲁米诺流动注射化学发光新体系测定肾上腺素

儿茶酚胺是一类非常重要的神经递质,在人体的心血管系统、神经系统、内分泌腺、肾脏、平滑肌等组织系统的生理活动中起着广泛的调节作用。肾上腺素为儿茶酚胺的一种,建立灵敏、高效的肾上腺素检测技术具有重要的临床意义。本文将银（Ⅲ）配合物与鲁米诺组成新的流动注射化学发光体系,利用碱性介质中肾上腺素对三价银配合物－鲁米诺化学发光体系有明显的增强效应来测定肾上腺素的含量,并据此建立了高效测定肾上腺素的流动注射化学发光新方法。在优化的条件下,该方法测定肾上腺素的线型范围为1.0×10－9～1.0×10－7 mol L-1,检出限为8.0×10－10 mol L-1,对1.5×10－8 mol L-1肾上腺素11次平行测定,其相对标偏差为2.9％。利用建立的分析方法测定了药物肾上腺素,并对三价银－鲁米诺化学发光新体系测定肾上腺素的反应机理进行了讨论。     

Hemin Functionalized Multiwalled Carbon Nanotubes as a Matrix for Sensitive Electrogenerated Chemiluminescence Cholesterol Biosensor

Based on hemin‐MWCNTs nanocomposite and hemin‐catalyzed luminol‐H₂O₂ reaction, a sensitive electrogenerated chemiluminescence (ECL) cholesterol biosensor was proposed in this paper. Firstly, hemin‐MWCNTs was prepared via π–π stacking and modified on the surface of GCE. Subsequently, cholesterol oxidase (ChOx) was adsorbed on the modified electrode to achieve a cholesterol biosensor. Hemin‐MWCNTs nanocomposite provided the electrode with a large surface area to load ChOx, and endowed the nanostructured interface on the electrode surface to enhance the performance of biosensor. The biosensor responded to cholesterol in the linear range from 0.3 µM to 1.2 mM with a detection limit of 0.1 µM (S/N=3).     

On‐Line Radical Scavenging Detection and Characterization of Antioxidants from Artemisia herba‐alba

Four caffeoylquinic acid (CQA) derivatives, 5‐O‐caffeoylquinic acid ( 1 ), 3,5‐di‐O‐caffeoylquinic acid ( 3 ), 4,5‐di‐O‐caffeoylquinic acid ( 4 ), and 3,4,5‐tri‐O‐caffeoylquinic acid ( 5 ), have been isolated from Artemisia herba‐alba growing wild in Algeria, using the on‐line HPLC? DAD? DPPH radical‐scavenging detection technique as guidance. In the course of the purification work, the non‐frequent (E)‐2‐(β‐D ‐glucopyranosyloxy)‐4‐methoxycinnamic acid ( 2 ) has also been isolated. The CQAs showed fair‐to‐good antioxidant activities determined by the DPPH^. scavenging assay. The structures of the five isolated compounds were determined by spectroscopic methods. The on‐line HPLC? DAD? DPPH technique allowed for a rapid pinpointing of antioxidants in the studied plant, accomplishing the facile guided isolation of the target molecules. Algerian A. herba‐alba could be an interesting source of natural antioxidants that deserve further work.     

Detection of Metal Ions (Cu2+, Hg2+) and Cocaine by Using Ligation DNAzyme Machinery

The Cu²⁺‐dependent ligation DNAzyme is implemented as a biocatalyst for the colorimetric or chemiluminescence detection of Cu²⁺ ions, Hg²⁺ ions, or cocaine. These sensing platforms are based on the structural tailoring of the sequence of the Cu²⁺‐dependent ligation DNAzyme for specific analytes. The tethering of a subunit of the hemin/G‐quadruplex DNAzyme to the ligation DNAzyme sequence, and the incorporation of an imidazole‐functionalized nucleic‐acid sequence, which acts as a co‐substrate for the ligation DNAzyme that is tethered to the complementary hemin/G‐quadruplex subunit. In the presence of different analytes, Cu²⁺ ions, Hg²⁺ ions, or cocaine, the pretailored Cu²⁺‐dependent ligation DNAzyme sequence stimulates the respective ligation process by combining the imidazole‐functionalized co‐substrate with the ligation DNAzyme sequence. These reactions lead to the self‐assembly of stable hemin/G‐quadruplex DNAzyme nanostructures that enable the colorimetric analysis of the substrate through the DNAzyme‐catalyzed oxidation of 2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid), ABTS^2?, by H₂O₂ into the colored product ABTS^.?, or the chemiluminescence detection of the substrate through the DNAzyme‐catalyzed oxidation of luminol by H₂O₂. The detection limits for the sensing of Cu²⁺ ions, Hg²⁺ ions, and cocaine correspond to 1 nM , 10 nM and 2.5 μM , respectively. These different sensing platforms also reveal impressive selectivities.     

A Novel Electrogenerated Chemiluminescence Reaction Scheme Using Core-Shell LuminoI-Based SiO2 Nanoparticles as a Regulator and Its Analytical Application

A novel core-shell luminol-based SiO2 nanoparticle While these nanoparticles were used as electrogenerated was synthesized by two step micro-emulsion method. chemiluminescence （ECL） reagent, the electrochemical （EC） reaction as well as the subsequent chemiluminescence （CL） reaction not only could be separated spatially, but also presented high efficiency for analytical purpose. In this case, the core-shell luminol-based SiO2 nanoparticles offered more potential to avoid the contradiction between the EC and the CL reaction conditions. A new ECL method based on the nanoparticle was developed, and isoniazid was selected as a model analyte to illustrate the characteristics of this new ECL method. Under the selected conditions, the proposed ECL response to isoniazid concentration was linear in the range of 1.0 ×10^-10 to 1.0 × 10^-6 g/mL with 2 × 10^-11g/mL detection limit.     

A Highly Efficient Chemiluminescence Probe for the Detection of Singlet Oxygen in Living Cells

Singlet oxygen is among the reactive oxygen species (ROS) with the shortest life‐times in aqueous media because of its extremely high reactivity. Therefore, designing sensors for detection of ¹O₂ is perhaps one of the most challenging tasks in the field of molecular probes. Herein, we report a highly selective and sensitive chemiluminescence probe ( SOCL‐CPP ) for the detection of ¹O₂ in living cells. The probe reacts with ¹O₂ to form a dioxetane that spontaneously decomposes under physiological conditions through a chemiexcitation pathway to emit green light with extraordinary intensity. SOCL‐CPP demonstrated promising ability to detect and image intracellular ¹O₂ produced by a photosensitizer in HeLa cells during photodynamic therapy (PDT) mode of action. Our findings make SOCL‐CPP the most effective known chemiluminescence probe for the detection of ¹O₂. We anticipate that our chemiluminescence probe for ¹O₂ imaging would be useful in PDT‐related applications and for monitoring ¹O₂ endogenously generated by cells in response to different stimuli.     

Chemiluminescence determination of ω-chloroacetophenone

A chemiluminescence method for the determination of ω-chloroacetophenone in ethanolic extracts is elaborated. The method is based on the linearity of the concentration dependence of the intensity of luminol chemiluminescence upon the action of peroxide species forming in the reaction of ω-chloroacetophenone with air oxygen activated by hemin in alkaline solutions. The detection limit makes (1.0 ± 0.3) × 10⁻⁵ mg/mL (P = 0.95, n = 5, RSD = 32 %) at 293 K.     

On-line selective detection of antioxidants free-radical scavenging activity based on Co(II)/EDTA-induced luminol chemiluminescence by flow injection analysis

This study establishes a new method to analyze the radical scavenging activity of antioxidants based on the luminol-H₂O₂-Co(II)/EDTA chemiluminescence and flow injection analysis. The method is based on the catalytic oxidation of hydrogen peroxide by Co(II)/EDTA complex, forming a free radical flux that can produce a stable chemiluminescence signal which is attenuated in the presence of antioxidants. A properly designed FIA manifold and the appropriate regulation of the chemiluminescence-reagent mixture enabled the establishment of a reaction-sensitive analytical procedure that minimizes oxidant-antioxidant interactions while favors the inhibition effect of antioxidants on the free radicals flux. In that manner, the uncontrolled experimental variability induced by side-reactions occurring antagonistically is reduced. The method was examined in-vitro for the continuous monitoring of the generation of oxygen-derived free radicals and antioxidants, which is closer to in-vivo conditions, with three common antioxidants (ascorbic acid, glutathione and uric acid). All three antioxidants were found to inhibit the luminescent signal with strict logarithmic linear mode, yielding calibration curves rectilinear in the range of 5 × 10⁻⁸-5 × 10⁻⁵ mol L⁻¹ and detection limits at the 10⁻⁸ mol L⁻¹ levels. The F-statistic was employed to assess the ability of the method to detect differences in the activity of the examined antioxidants. The results suggest that the proposed method can be used efficiently for the detection of free radical activity in real samples.     

Simultaneous quantification of catecholamines in rat brain by high‐performance liquid chromatography with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence detection

A new method based on high‐performance liquid chromatography (HPLC) coupled with on‐line gold nanoparticle‐catalyzed luminol chemiluminescence (CL) detection was developed for the simultaneous quantitation of catecholamines in rat brain. In the present CL system, gold nanoparticles were produced by the on‐line reaction of H₂O₂, NaHCO₃?Na₂CO₃ (buffer solution of luminol) and HAuCl_4. Norepinephrine (NE), epinephrine (EP) and dopamine (DA) could strongly enhance the CL signal of the on‐line gold nanoparticle‐catalyzed luminol system. The UV?visible absorption spectra and transmission electron microscopy studies were carried out, and the CL enhancement mechanism was proposed. Catecholamines promoted the on‐line formation of more gold nanoparticles, which better catalyzed the luminol–H₂O₂ CL reaction. The good separation of NE, EP and DA was achieved with isocratic elution using a mixture of methanol and 0.2% aqueous phosphoric acid (5:95, v/v) within 8.5 min. Under the optimized conditions, the detection limits, defined as a signal‐to‐noise ratio of 3, were in the range of 1.32–1.90 ng/mL, corresponding to 26.4?38.0 pg for 20 μL sample injection. The recoveries of catecholamines added to rat brain sample were >94.6%, with the precisions <5.5%. The validated HPLC?CL method was successfully applied to determine NE and DA in rat brain without prior sample purification. Copyright © 2014 John Wiley & Sons, Ltd.     

In Vitro Monitoring of Picogram Levels of Captopril in Human Urine Using Flow Injection Chemiluminescence with Immobilized Reagent Technique

Abstract

A flow‐injection procedure for detection of captopril using a Co²⁺‐captopril complex formed on line based enhancement of luminol and dissolved oxygen chemiluminescence is described. The chemiluminescence reagents, luminol and Co²⁺, were both immobilized on ion exchange resin in the flow injection system. When captopril solution flowed through the immobilized Co²⁺ column, the Co²⁺‐captopril (1:2) complex formed on line could greatly enhanced the chemiluminescence intensity generated from the reaction between luminol and dissolved oxygen. The increment of chemiluminescence emission was correlated with the captopril concentration in the range from 7 to 1000 pg mL^?1, and the detection limit was 2 pg mL^?1 (3σ). One analysis cycle, including sampling and washing, could be accomplished in 0.5 min with relative standard deviations of less than 3.0% (n=11). The proposed method was applied directly in the assay of human urine without any pretreatment and it was found that the captopril concentration reached its maximum after being administrated orally for 1.5 hours, with the mean excretion ratio in 6.5 hours of 54.3% in the body of volunteers. The possible chemiluminescence mechanism was discussed.     

On‐line Liquid‐liquid Extraction Coupled to a Reversed Micellar‐mediated Chemiluminescence Detection System: Application to the Determination of Amino/Nitroaromatic Compounds

A simple and fast flow method for the trace level determination of p‐toluidine, 2‐methyl‐5‐nitroaniline, and 2,4‐dinitroaniline in aqueous samples is reported. These amino/nitroaromatics are related to trinitrotoluene (TNT) and appear during the degradation process of the explosive. The chemical principles of ion‐pair formation and liquid‐liquid extraction are applied: In aqueous acidic medium, the protonated analyte [HA]⁺ makes an ion‐pair with the tetrachloroaurate(III) ion, followed by on‐line ion‐pair extraction into the dichloromethane carrier used. After membrane separation, the CH₂Cl₂ containing the ion‐pair, [HA]⁺[AuCl₄]⁻, is mixed with the reversed micellar luminescent reagent of luminol (in 0.3 M Na₂CO₃) prepared from cetyl‐trimethylammonium chloride in CH₂Cl₂‐cyclohexane and the [AuCl₄⁻‐luminol chemiluminescence (CL) output is recorded. The detection limits (S/N> 3) are: p‐toluidine, 1.0 × 10⁻⁴M; 2‐methyl‐5‐nitroaniline, 1.0 × 10⁻⁷ M; 2,4‐dinitroaniline, 1.0 × 10⁻⁷ M, while the calibration curves are linear between 1.0 × 10⁻⁴ — 1.0 × 10⁻² M for all the compounds. Although spectral studies indicated the formation and extraction of a very small amount of the ion‐pair species, the reversed micellar‐mediated CL detection system provides an alternative procedure for the determination of degradation products of the explosive TNT in environmental aqueous samples.     

Flavonoid Glycosides from Terminalia catappa L.

Under the inhibition of Cu⁺²‐induced LDL oxidation‐guided fractionation, two new flavone glycosides with galloyl substitution were isolated from the dried fallen leaves of Terminalia catappa L. Their structures were established as apigenin 6‐C‐(2″‐O‐galloyl)‐β‐D‐glucopyranoside ( 1 ) and apigenin 8‐C‐(2″‐O‐galloyl)‐β‐D‐glucopyranoside ( 2 ), together with four known flavone glycosides, isovitexin, vitexin, isoorientin, and rutin, on the basis of spectroscopic method. Compounds 1 and 2 showed significant antioxidative effects. Their IC₅₀ were 2.1 and 4.5 μM, respectively.