聚藏红T修饰电极的制备及对多巴胺的电催化性能

用循环伏安法在石墨电极和ITO导电玻璃上制备了藏红T聚合物薄膜修饰电极,研究了电聚合过程及循环伏安性质.聚藏红T膜修饰石墨电极在pH 6.81的PBS中循环扫描,有两对氧化还原峰,峰电位分别为Ep,a(P1)=-0.5 V,Ep,c(P1)=-0.575 V,Ep,a(P2)=-0.36 V,Ep,c(P2)=-0.425 V,而且聚合物较稳定.测定了聚藏红T膜的可见光谱性质.实验表明,聚藏红T膜修饰电极对多巴胺有明显的催化作用.     

电化学合成Pt-Au复合催化剂及其对甲醇的电催化氧化

在ITO导电玻璃上, 采用循环伏安法制备Pt-Au复合催化剂. 通过扫描电镜(SEM), X射线能量色散谱(EDX), X射线衍射(XRD)及其电化学方法对催化剂样品进行了表征. SEM结果表明, Pt-Au复合催化剂的形貌近似球状粒子. 循环伏安法和计时电流法的测试结果表明, 复合催化剂中Au的加入有利于甲醇的电催化氧化, 并提高了Pt对甲醇氧化的抗毒化能力. 同时研究了复合催化剂中Au的不同含量对甲醇氧化的影响, 结果表明, 当 Pt和Au物质的量比为1.07∶1时, Pt-Au/ITO催化剂具有最佳的甲醇电催化氧化活性.     

细胞色素C551在ITO电极上的直接电化学

在不加任何电子转移促进剂的条件下,用循环伏安法(CV)和微分脉冲伏安法(DPV)观察到细胞色素C551在ITO导电玻璃上的直接电化学行为.结果显示电极反应过程为准可逆性质,计算得到细胞色素C551的扩散系数、式电位和异相电子转移标准速率常数,并对其在ITO导电玻璃电极上的电子转移机制进行了初步分析.     

磷钼钨杂多酸-L-半胱氨酸自组装膜电极的电化学性质

磷钼钨杂多阴离子通过分子间静电作用吸附在L-半胱氨酸自组装单分子膜修饰金电极表面,制备了磷钼钨杂多酸-L-半胱氨酸自组装超分子膜电极,探讨了成膜条件.采用循环伏安(CV)、计时库仑(CC)、水平衰减全反射傅立叶变换红外光谱(ATR-FTIR)表征了膜的组成及电化学性质.实验发现,该膜电极在1.0 mol•L－1H2SO4溶液中,于0.8～－0.2 V(υs SCE)间CV扫描出现3对稳定、可逆的氧化还原峰,计时库仑法计算了薄膜内的电子传递系数D为 2.64×10－7 cm2•s－1,初步探讨了膜电极的氧化还原性能.     

微波辅助合成Ru(Ⅱ)配合物及其自组装多层膜

运用微波辅助合成技术制备得到对称性钌(Ⅱ)配合物,对该配合物进行了¹H NMR,ESI-MS和TG分析.该钌配合物两端对称的磷酸基团可通过共价键作用组装到纳米铟锡金属氧化物导电玻璃(Indium Tin Oxides,ITO)表面,使ITO表面呈现亲水性.利用锆离子作为桥梁成功组装了钌多层膜,并对该多层膜进行了循环伏安法(Cyclic Voltammetry,CV)及紫外-可见吸收光谱法(Ultraviolet-visible absorption spectrometry,UV-Vis)等光电化学分析,实验结果表明层层自组装过程中膜沉积均匀,在0.53 V出现可逆的氧化还原峰,在300~600 nm的紫外可见区域出现强且宽的吸收峰,表明该钌配合物具有优良的光电性能.     

RuO_2/TiO_2纳米薄膜的新构建及对CO_2的电催化还原

在旋涂有球状纳米TiO2薄膜的导电玻璃(ITO)基底上采用循环伏安法(CV)电沉积RuO2作为电催化还原CO2的阴极.采用场发射扫描电子显微镜(FE-SEM)表征了RuO2/TiO2纳米薄膜的形貌,并应用近稳态电位扫描法和计时电流法(i～t)研究了薄膜的电催化CO2性能.结果表明所构建的RuO2/TiO2薄膜中纳米粒子大小均匀、排列致密,且较传统热分解法所得催化剂有更好的电催化性能.     

3-氨基苯硼酸-苯胺在ITO玻璃上的电聚合及对维生素C的光学响应

在硫酸介质中,以氧化铟锡(ITO)透明导电玻璃为载体,利用循环伏安法制备3-氨基苯硼酸-苯胺共聚物膜,研究了该薄膜对维生素C(AA)的光学响应.结果表明,利用电聚合方法可在ITO玻璃表面形成均匀致密的蓝色3-氨基苯硼酸-苯胺共聚物薄膜,薄膜的厚度可通过控制电位循环圈数来进行调节,薄膜使用后可用恒电位法和循环伏安法进行再生;在3%HAc介质中,在2.0～17.5mg·L-1范围内薄膜对AA浓度的变化产生灵敏的光学响应,且在480～750nm波长范围内随着波长的增加响应的灵敏度增加.     

微波辅助合成Ru(Ⅱ)配合物及其自组装多层膜

运用微波辅助合成技术制备得到对称性钌(Ⅱ)配合物,对该配合物进行了¹H NMR,ESI-MS和TG分析。该钌配合物两端对称的磷酸基团可通过共价键作用组装到纳米铟锡金属氧化物导电玻璃(Indium Tin Oxides,ITO)表面,使ITO表面呈现亲水性。利用锆离子作为桥梁成功组装了钌多层膜,并对该多层膜进行了循环伏安法(Cyclic Voltammetry,CV)及紫外-可见吸收光谱法(Ultraviolet-visible absorption spectrometry,UV-Vis)等光电化学分析,实验结果表明层层自组装过程中膜沉积均匀,在0.53V出现可逆的氧化还原峰,在300~600nm的紫外可见区域出现强且宽的吸收峰,表明该钌配合物具有优良的光电性能。     

pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

膜修饰液/液界面上亚叶酸离子的转移

采用复合介孔膜修饰水/1,6-二氯己烷(W/DCH)界面得到阵列介观W/DCH界面,利用循环伏安法、差分脉冲伏安法以及计时电量法考察了亚叶酸离子在该阵列介观W/DCH界面上的转移过程.结果表明,亚叶酸离子在膜修饰W/DCH界面上转移的电化学响应与复合介孔膜内表面活性剂十六烷基三甲基溴化铵密切相关.循环伏安结果表明,亚叶酸离子由膜内水相向油相转移的峰电流与扫描速率的平方根呈线性关系,根据Randles-Sevik方程,计算得到亚叶酸离子在复合介孔膜内水相中的扩散系数为2.036×10~(-8)cm~2/s.利用计时电量法测得亚叶酸离子在该界面上转移反应的标准速率常数为2.72×10~(-3)cm/s.     

Fabrication and photoelectric properties of self-assembled bilayer lipid membranes on conducting glass

Supported bilayer lipid membranes (s-BLMs with and without the doping of fullerene C60) self-assembled on indium-tin oxide (ITO) glass were fabricated and characterized by cyclic voltammetry and electrochemical impedance spectroscopy using a three-electrode system. The photoelectric properties of the ITO supported planar lipid bilayers were studied. Light intensity of irradiation, bias voltage, and concentration of donors have been found to be limiting factors of the transmembrane photocurrent. The facilitation effect of C60 doping in s-BLMs on the photoinduced electron transfer across s-BLM is discussed. This novel self-assembled ITO/s-BLM system may provide a simple and mechanically stable model for the study of the photoelectric and photodynamic properties of biomembranes.     

Nanostructured platinum-lipid bilayer composite as biosensor

The present work describes the preparation of supported bilayer lipid membrane (s-BLM) doped with metal nanoparticles for the design of biosensors. Platinum (Pt) nanoparticles were deposited through s-BLM to build a hybrid device of nanoscale electrode array by potential cycling in 1 mM K(2)PtCl(6) solution containing 0.1 M KCl. The properties of Pt nanoparticle-doped s-BLM composite were then characterized by cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and atomic force microscopy (AFM). Our results showed that Pt nanoparticles grew in voids of the s-BLMs, through which the underlying glassy carbon (GC) electrode was connected, with maximum length extended out of the lipid membrane around 40 nm. Doping of Pt nanoparticles through s-BLM increased the membrane capacitance and decreased the membrane resistance of s-BLM. Pt nanoparticles array in s-BLM electrocatalyzed the reduction of oxygen (O(2)) in phosphate buffer solution (PBS). Practical application of Pt nanoparticle-doped s-BLM for the construction of glucose biosensor was also demonstrated in terms of its dose-response curve, stability and reproducibility. Thus, lipid membrane doped with Pt nanoparticles is a novel electrode system at nanoscale that can penetrate through the insulating membrane to probe molecular recognition and catalytic events at the lipid membrane-solution interface.     

联萘酚与固体支撑双层类脂膜相互作用

采用循环伏安法、交流阻抗法研究了联萘酚(BINOL)与固体支撑双层类脂膜(s-BLM)之间的相互作用.结果表明,联萘酚通过氢键、疏水作用与s-BLM发生相互作用.随着相互作用时间的延长,联萘酚/s-BLM体系中的氧化峰电流先增大后减小,表明联萘酚逐渐破坏s-BLM的整体性,诱导膜内部形成微孔通道.联萘酚的浓度越大,联萘酚分子通过s-BLM的渗透时间越短.此外,随着卵磷脂浓度和胆固醇含量的增加,s-BLM的膜电阻变大,联萘酚渗透通过s-BLM速率减小,导致其对s-BLM的渗透性能减弱.     

脱氧胆酸钠与支撑磷脂双层膜作用的电化学研究

以支撑磷脂双层膜(supported bilayer lipid membrane, s-BLM)作为生物膜模型, 采用循环伏安法和交流阻抗技术研究了脱氧胆酸钠(sodium deoxycholate, NaDC)与s-BLM的相互作用. 结果表明, NaDC能降低磷脂分子的有序性, 诱发s-BLM上形成孔洞或缺陷, 并且它们之间的这种相互作用对作用时间、NaDC溶液的浓度和pH值以及胆固醇的存在与否具有依赖性, 并且作用后的s-BLM在0.1 mol/L的KCl溶液中能够自我修复, 这表明NaDC与s-BLM的相互作用是可逆的.     

胆酸钠与支撑磷脂双层膜作用的电化学研究

采用电化学方法研究胆酸钠(NaC)与s-BLM的相互作用, 并结合实验结果对NaC与s-BLM的作用机理进行了讨论.     

ITO上电沉积Pd的成核机理及电催化性质

采用循环伏安技术和计时电流技术, 研究了ITO上电沉积Pd的过程, 发现Pd在ITO表面的电沉积是过电位成核且为不可逆的扩散控制过程; 根据Cottrell方程计算得到[PdCl₄]^2-的扩散系数为2.19×10^-5 cm²/s; 根据Scharifker的理论模型, 归一化处理电流-时间曲线, 与理论成核曲线对照, 判断Pd 的成核机理. 通过场发射扫描电子显微镜(FESEM)对Pd 的形貌进行分析, 讨论了沉积电位和沉积时间对Pd纳米粒子形貌的影响. 用X射线粉末衍射(XRD)对Pd纳米粒子进行结构分析, 并在0.5 mol/L H₂SO₄溶液中研究了其电化学性质及在碱性条件下乙醇分子的电催化性质.     

Electrostriction of biotin-streptavidin-modified bilayer lipid membranes on a metal support

Using the electrostriction method we have studied the elasticity modulus perpendicular to the membrane plane, E⊥, electrical capacitance, C, coefficient of dynamic viscosity, η, and membrane potential difference δф_m of supported bilayer lipid membranes (s-BLM) modified by biotin-streptavidin, as a function of d.c. voltage applied to the membrane. Binding of streptavidin to biotin-modified s-BLM resulted in a slight decrease of membrane capacitance, increase of E_⊥ and increase of η, while δф_m did not change. The val of E_⊥ of unmodified membranes was found to change considerably with increasing d.c. voltage and the rate of voltage change. Modification of s-BLM by streptavidin leads to reduced changes of E_⊥ with the rate of d.c. voltage change, and it made s-BLM extremely stable even at an external d.c. voltage of 2 V. Our results indicate that streptavidin considerably stabilized s-BLM by means of the formation of a complex with biotin-modified phospholipids.     

羟自由基对支撑磷脂双层膜的破坏及水溶性抗氧化剂保护作用的电化学研究

以支撑磷脂双层膜(supported bilayer lipid membrane, s-BLM)作为生物膜模型, 利用Fenton体系产生羟自由基(hydroxyl free radical, •OH), 采用循环伏安法研究了s-BLM与•OH之间的相互作用. 结果表明: •OH通过与磷脂发生化学反应, 诱发s-BLM上形成孔洞或缺陷, 这种作用对时间、FeSO₄和H₂O₂的浓度具有依赖性, 且不可恢复. 具有还原性基团的抗氧化剂维生素C, 还原型谷胱甘肽和L-半胱氨酸, 通过与•OH发生氧化还原反应, 可抑制•OH与s-BLM的相互作用, 降低•OH对s-BLM结构的破坏程度.     

Photoelectric measurements of s-BLM/nucleoli: a new technique for studying apoptosis

A new method based on photoelectric measurement for analyzing apoptosis of cell-free MCF-7 nucleoli is reported. Supported bilayer lipid membrane (s-BLM) was used to enclose nucleoli in biological environment. The s-BLM was self-assembled on the wall of a super-thin cell. During the apoptosis induced by Taxol, the photoelectric current of the self-assembled s-BLM/nucleoli was found decreasing with time, suggesting the degradation of nucleus DNA. Electron transfer along the DNA double helix and along nuclear skeleton is assumed in the interpretation. This novel photoelectric analytical method may provide a rapid and sensitive technique to evaluate apoptosis.     

Disposable Amperometric A-fetoprotein Immunosensor Based on the Biocompatible Silk Protein Membranes-Modified Indium Tin Oxide Electrodes

A simple and disposable electrochemical immunosensor for detection of 68 kDa alpha-fetoprotein (AFP) was fabricated based on films of silk fibroin protein membrane (SFPM)/Prussian blue (PB)/deposition of gold nanoparticles (DpAu). First, DpAu and PB were electrochemically deposited successively on the surface of indium tin oxide (ITO) electrode. Then, SFPM with excellent biocompatibility was modified on the surface of PB/DpAu/ITO. The SFPM could form a stable matrix on the electrode surface for the deposition of immunoactive agents. More importantly, the SFPM could prevent the possible leakage of electron mediator and enhance the stability of immunosensor. Scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to characterize the assembly process of the modified electrode. The linear range of the proposed immunosensor extended from 1.0 to 200.0 ng/mL for detection of AFP with a detection limit of 0.6 ng/mL. Moreover, the CV test demonstrated the immunosensor exhibited acceptable reproducibility and stability. This composite membrane could be applied for the detection of different biomarkers, diagnosis, and monitoring of carcinoma.

[Supplementary materials are available for this article. Go to the publisher's online edition of Analytical Letters for the following free supplemental resources: additional figures.]