Zirconyl-alizarin blue s complex a spectrophotometric study

Alizarin blue S in 0.5N hydrochloric acid and 10% acetone gives a coloured complex with zirconium salts, which is used for the estimation of zirconium. Measurements were made at 625 mμ and the interference of several cations and anions was studied     

Simultaneous spectrophotometric determination of thymol blue, semimethylthymol blue and methylthymol blue II. Monitoring of the syntheses of semimethylthymol blue and methylthymol blue

A new version of the direct spectrophotometric method for the simultaneous determination of Thymol Blue, Semimethylthymol Blue (SMTB) and Methylthymol Blue (MTB) was developed and used for monitoring syntheses of SMTB and MTB.     

Synthesis of a double spiro-polyindenofluorene with a stable blue emission

[reaction: see text] A novel polyindenofluorene containing a double spiro-anthracene structure with solublizing alkyl groups was synthesized. Enhanced spectral stability of the polymer was investigated by heat treatment and photoirradiation in air. The EL spectrum of the polymer showed an enhanced sensitivity to the human eye and good color purity as a blue-emitting material.     

Halogenated blue pigments of a deep sea gorgonian

Three halogenated azulenes (2-4), one of the chiral, have been isolated from a deep sea gorgonian which was collected by minisubmersible at ?350 m.     

Maya blue: a computational and spectroscopic study

Maya Blue pigment, used in pre-Colombian America by the ancient Mayas, is a complex between the clay palygorskite and the indigo dye. The pigment can be manufactured by mixing palygorskite and indigo and heating to T > 120 degrees C. The most quoted hypothesis states that the dye molecules enter the microchannels which permeate the clay structure, thus creating a stable complex. Maya Blue shows a remarkable chemical stability, presumably caused by interactions formed between indigo and clay surfaces. This work aims at studying the nature of these interactions by means of computational and spectroscopic techniques. The encapsulation of indigo inside the clay framework was tested by means of molecular modeling techniques. The calculation of the reaction energies confirmed that the formation of the clay-organic complex can occur only if palygorskite is heated at temperatures well above the water desorption step, when the release of water is entropically favored. H-bonds between the clay framework and the indigo were detected by means of spectroscopic methods. FTIR spectroscopy on outgassed palygorskite and freshly synthesized Maya Blue samples showed that the presence of indigo modifies the spectroscopic features of both structural and zeolitic water, although no clear bands of the dye groups could be observed, presumably due to its very low concentration. The positions and intensities of delta(H2O) and nu(H2O) modes showed that part of the structural water molecules interact via a hydrogen bond with the C=O or N-H groups of indigo. Micro-Raman spectra clearly evidenced the presence of indigo both in original and in freshly synthesized Maya Blue. The nu(C=O) symmetric mode of Maya Blue red-shifts with respect to pure indigo, as the result of the formation of H-bonds with the nearest clay structural water. Ab initio quantum methods were applied on the indigo molecule, both isolated and linked through H-bonds with water, to calculate the magnitude of the expected vibrational shifts. Calculated and experimental vibrational shifts appeared to be in good agreement. The presence of a peak at 17.8 ppm and the shift of the N-H signal in the 1H MAS NMR spectrum of Maya Blue provide evidence of hydrogen bond interactions between indigo and palygorskite in agreement with IR and ab initio methods.     

Methyl calcein blue and other analogues of calcein blue

4-Methylumbelliferone-8-methylenesarcosine (Methyl Calcein Blue) and four related metallofluorochromic indicators derived from umbelliferone, 4-methylumbelliferone, and 4-methylesculetin by condensation with formaldehyde and iminodiacetic acid or glycine have been synthesized, the structures established, the absorbance and fluorescence measured as functions of pH, and the reactions with copper(II) and calcium studied with attention to the effects on fluorescence. All of the compounds display a maximum fluorescence at ph about 9. The fluorescence of each is quenched by copper(II). The calcium derivatives of the compounds derived from the umbelliferones and iminodiacetic acid fluoresce at high ph but those from the umbelliferones and glycine or sarcosine do not. At high pH, 4-methylesculetin and the amino-acids derived from it do not fluoresce either alone or in the prescence of calcium.     

Colorimetric assay for lysozyme using Micrococcus luteus labeled with a blue dye, Remazol brilliant blue R, as a substrate.

Micrococcus luteus (M. lysodeikticus) labeled with Remazol brilliant blue R (blue ML) was prepared as a novel substrate for the colorimetric assay of lysozyme. The treatment of the labeled substrate with lysozyme resulted in the release of soluble blue products which can be easily measured spectrophotometrically at 600 nm. The blue color was most efficiently released at pH 7 and ionic strength of 0.2 on incubation with hen lysozyme at 40 degrees C. A new colorimetric method for the assay of lysozyme using this substrate was developed. The assay system gave a linear dose-response curve, and as little as 0.1 microgram of human lysozyme (1 microgram/ml, 100 microliters) can be detected. The present method is more convenient and reproducible than the conventional lysozyme assay with bacterial cells. Application of the system to the determination of lysozyme in human serum is described.     

A photometric detector based on a blue light-emitting diode

The suitability of blue light-emitting diodes as radiation sources in molecular absorption spectroscopy was evaluated. Electronic as well as spectral considerations are discussed. A transducer based on a blue light-emitting diode and a photodiode is described which yields direct absorbance readings by passing the photocurrent to an integrated circuit logarithmic converter. The performance of this device was tested for commonly used spectrophotometric procedures for Cr, Mn, Zn, Fe and Cl and compared with conventional molecular absorption spectroscopy. Also investigated was the application of the transducer as a detector in flow-injection analysis.     

Anodic a.c. polarography of methylthymol blue

The anodic a.c. polarographic properties of methylthymol blue (MTB) were investigated in the supporting electrolyte of potassium nitrate containing buffer. The difference in the peak potentials of MTB and EDTA is a good measure of the difference in the stabilities of both chelates. The stability constant of mercury(II)-MTB complex was successfully determined on the basis of that reported for the mercury(II)-EDTA complex.     

Lifetime prediction of a blue PE100 water pipe

The traditional method to assess the lifetime of plastic pipes is based on hydrostatic pressure testing. A complementary approach has been conducted to monitor the depletion of antioxidants and initiation of thermo-oxidative degradation on a PE100 blue water pipe that had been exposed to hydrostatic pressure in water at low test temperatures (maximum 80 °C).Depletion of antioxidants was monitored using OIT testing and initiation of thermo-oxidative degradation was assessed by iodometric detection of hydroperoxides. An empirical model based on the Arrhenius fit of the data was developed to extrapolate the lifetime of the PE100 pipe material at various service temperatures (10-25 °C). Associated activation energies, E_a, were determined and appeared to be in line with the values obtained from experiments carried out at low test temperatures. The combination of pressure testing and chemical analyses proved to be a very powerful tool to extrapolate the lifetime of plastic pipes.     

Variamine blue as a gravimetric reagent Determination of tungsten

Tungsten can be precipitated by a solution of Variamine Blue at pH 5. The precipitate is ignited to constant weight at a temperature above 600 degrees and weighed as tungsten trioxide. The method can be used for the determination of tungsten in alloy steels.     

Pulse radiolysis of methylene blue and toluidine blue in PVA

Pulse radiolysis experiments were carried out with aqueous solutions of thionine dye methylene blue (MB) and toluidine blue in the presence of polyvinyl alcohol. The transient spectra obtained show maxima at 400 and 880 nm and are assigned to the respective semiquinone radical anions. The semiquinone radical decayed by a second order process. Furthermore, MB in PVA films were bleached by γ-radiolysis and the change in absorption was found to be linear with the dose.     

Hybrids and biohybrids as green materials for a blue planet

There is an urgency to identify novel technological answers to the decreasing availability of important resources together with increasing accumulation of pollution. Among the many ways materials science can contribute to these issues, the enhanced use of renewable resources, the optimal production of alternative energies and the improved monitoring/cleaning of contaminated environments can be identified as area where the sol–gel technology has, and will have, a major role to play. In this short review, we more specifically illustrate recent developments in biohybrid chemistry applied to bioplastics, biofuel cells, biosensors and bioremediation.     

Celestine blue as a new indicator in electrochemical DNA biosensors

Celestine blue(CB)was introduced as a new electroactive indicator in DNA biosensors.The interaction of CB with DNA was investigated by electrochemical and spectroscopic methods.The effect of buffer kind and p H on the electrochemical behavior of CB was studied.The peak currents of CB were linearly related to DNA concentration in the range of 5.0×10~(-9) to 1.0×10~(-7)mol/L.The detection limit of this approach was 4.76×10~(-10) mol/L.Based on spectrometry data a hypochromic effect was observed in UV-Vis spectra of CB with increasing DNA concentration.The results illustrate the possible interaction mode between CB and DNA is electrostatic binding.     

Nanocomposite of a chromium Prussian blue with TiO2. Redox reactions and the synthesis of Prussian blue molecule-based magnets

The reaction of [NEt₄]₃[Cr(CN)₆] with titanium(III) p-toluenesulfonate at a pH of 2 affords a gray solid whose metal content and spectroscopic and magnetic properties are fully consistent with it being a Prussian blue material of stoichiometry “Ti^III[Cr^III(CN)₆] · H₂O”. The carbon, nitrogen, and hydrogen content, however, are not consistent with this stoichiometry, and further investigation showed that the gray material has a powder X-ray diffraction profile, infrared spectrum, and magnetic properties very similar to those of the “all-chromium” Prussian blue Cr^II[Cr^III(CN)₆]_0.67 · 6H₂O. All data, including the C, H, and N weight percentages, are consistent with the conclusion that the material isolated is a nanocomposite of Cr^II[Cr^III(CN)₆]_0.67 · xH₂O and TiO₂ in the ratio of 1–1.6. These results suggest that Ti^III reduces some of the [Cr^III(CN)₆]³⁻ ions to generate Ti^IV and Cr^II; the former hydrolyzes to amorphous TiO₂ · 2H₂O, the latter loses its bound CN ligands and reacts with unreacted [Cr^III(CN)₆]³⁻ ions to generate the crystalline all-chromium PB species. The electrochemical potentials suggest that the [Cr^III(CN)₆]³⁻ ion should not be reduced by Ti^III; evidently, this unfavorable reaction is driven by the insolubility of the reaction products. The results constitute a cautionary tale in two respects: first, that the characterization of Prussian blue materials must be conducted with care and, second, that the insolubility of Prussian blue analogues can sometimes drive reactions that in solution are thermodynamically unfavorable.     

Plasma proteomics for biomarker discovery: a study in blue

The performance of Cibacron Blue dye (HiTrapBlue or Affigel Blue) in depleting albumin from plasma, as a pre-treatment for biomarker searching in the low-abundance proteome, is here assessed. It is shown that (i) co-depletion of non-albumin species is an ever-present hazard; (ii) the only proper eluant able to release quantitatively the proteins bound to the dye is boiling 4% SDS-25 mM DTT, an ion shock (2 M NaCl) being quite ineffective in releasing the low-abundance species tightly bound to the dye moiety; (iii) the mechanism of dye-protein interaction, after an initial ion-ion docking, is a robust hydrophobic interaction, which progressively augments at lower and lower pH values; (iv) at pH 2.2 in the presence of 0.1% TFA, the blue resin behaves, for all practical purposes, just as a reverse-phase chromatography column, since all residual proteins present in plasma are completely harvested. However Cibacron Blue technology should not necessarily be discarded: As long as also the plasma fraction adsorbed is properly released and analyzed, together with the flow through, one should be able to perform a viable analysis of the low-abundance proteome.     

Preparation of a genipin blue from egg protein and genipin

Genipin blue is a pigment prepared from the reaction of genipin with amino acid. We describe herein a new method used to prepare genipin blue, water-soluble blue pigments, through the reaction of hen egg protein with genipin. The effects of reaction time, reaction temperature, the pH value of the solution and the mass ratio of the reactants on the preparation are studied. One part of genipin reacted with eight parts of hen egg protein (w/w) in water (pH value of reaction system 7.5) at 60°C for 96?h and gave blue pigments with the maximum colour value of 146.2. The blue pigments showed identical absorption activity in UV spectroscopy (λ(max?)=?584?nm) to that of gardenia blue pigments, which were prepared from the reaction of genipin with amino acid.     

Protein determination using methylene blue in a synchronous fluorescence technique

A new method for detecting protein by synchronous fluorescence enhancement was developed, based on the combination of near infrared (NIR) fluorescence and the dedimerization phenomenon of methylene blue (MB). Under analytical conditions, there are linear relationships between the enhancing extent of synchronous fluorescence of MB-sodium dodecyl benzene sulfonate (SDBS)-protein at 667 nm and the concentration of protein in the range of 8.0 × 10⁻⁸-4.0 × 10⁻⁵ g mL⁻¹ for bovine serum albumin (BSA), 1.0 × 10⁻⁷-3.5 × 10⁻⁵ g mL⁻¹ for egg albumin (EA). The detection limits (S/N = 3) of BSA and EA are 8.9 ng mL⁻¹ and 10.0 ng mL⁻¹, respectively. The fluorescence enhancement mechanism is discussed in detail. Results from multiple techniques indicate that the fluorescence enhancement of the system originates from the hydrophobic microenvironment provided by BSA and SDBS, and the formation of an MB-SDBS-BSA complex, as well as the deaggregation of some MB dimer.     

Conversion of red fluorescent protein into a bright blue probe

We used a red chromophore formation pathway, in which the anionic red chromophore is formed from the neutral blue intermediate, to suggest a rational design strategy to develop blue fluorescent proteins with a tyrosine-based chromophore. The strategy was applied to red fluorescent proteins of the different genetic backgrounds, such as TagRFP, mCherry, HcRed1, M355NA, and mKeima, which all were converted into blue probes. Further improvement of the blue variant of TagRFP by random mutagenesis resulted in an enhanced monomeric protein, mTagBFP, characterized by the substantially higher brightness, the faster chromophore maturation, and the higher pH stability than blue fluorescent proteins with a histidine in the chromophore. The detailed biochemical and photochemical analysis indicates that mTagBFP is the true monomeric protein tag for multicolor and lifetime imaging, as well as the outstanding donor for green fluorescent proteins in F?rster resonance energy transfer applications.