Novel (E)- and (Z)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles from (E)- and (Z)-3-styrylchromones: the unexpected case of (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles

An efficient synthetic method for the preparation of (E)- and (Z)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles has been developed. The reaction of (E)- and (Z)-3-styrylchromones with hydrazine hydrate afforded the corresponding (E)- and (Z)-4-styrylpyrazoles, respectively, saved 4′-nitro-derivatives where both (E)- and (Z)-4′-nitro-3-styrylchromones afforded (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles. The reaction mechanism for these transformations was discussed and the stereochemistry of all products was assigned by NMR experiments.     

Cationic di- and mono-carbonyl complexes of manganese(I)

The complexes fac-O₃ClOMn(CO)₃(NN) (NN = 1,10-phenantroline (phen) or 2,2'bipyridine (bipy)) react with an excess of the ligands L [L = P(OR)₃ or P(OR)₂Ph, R = Me or Et] in refluxing ethanol to give cis-trans-[Mn(CO)₂-(NN)L₂]ClO₄, or the more highly substituted [Mn(CO)(NN)L₃]ClO₄ if the reaction is carried out under UV irradiation. Carbonylation at normal pressure of the latter complexes results in the formation of cis-cis-[Mn(CO)₂(NN)L₂]ClO₄, which undergo isomerization to the cis-trans isomer when heated in acetone.Treatment of fac-O₃ClOMn(CO)₃(dpe) (dpe = 1,2-bis(diphenylphosphino)-ethane] with bipy or phen in refluxing ethanol gives the corresponding cis-[Mn(CO)₂(NN)(dpe)]ClO₄ complexes, and irradiation of these with UV in the presence of an excess of P(OR)₃ (R = Ph, Et or Me) gives the monocarbonyls [Mn(CO)(NN)(dpe)L]ClO₄.     

Synthesis of 2,3,4-trideoxy-4-c-(phenylphosphinyl)-dl-glycero-pentofuranose and its 1,5-diacetate

Synthesis of 2,3,4-trideoxy-4-C-(phenylphosphinyl)-dl-glycero-pentofuranose (11) starting from 2-furanmethanol was successful. The reaction of methyl 2,3-dideoxy-(1S)-dl-pentopyranosid-4-ulose 4-(p-toluenesulfonylhydrazone) with methyl phenylphosphonite gave methyl (4RS)-2,3,4-trideoxy-4-C-[(methoxy)phenylphosphinyl]-4-C-(p-toluenesulfonylhydrazino)-(1S)-dl-pentopyranoside (7), which on treatment with sodium borohydride afforded methyl 2,3,4-trideoxy-4-C-[(methoxy)phenylphosphinyl]-(1S)-dl-glycero-pentopyranoside (9). Treatment of compound 9 with SDMA followed by hydrolysis and treatment with acetic anhydride-pyridine afforded 1,5-diacetate 12 of compound 11.     

Enantioselective synthesis of the carbocyclic moiety of (−)-carbovir

Enantioselective construction of the protected carbocycle moiety of the anti-HIV drug carbovir was achieved in 11 steps from (S)-(−)-ethyl lactate. The two key steps are a Claisen [3+3] sigmatropic rearrangement of (3S,4E)-3-(4-methoxy-phenoxymethyl)-hex-4-enoic acid dimethylamide and next, a ruthenium-catalysed ring closure metathesis leading to (1S,4S)-4-(4-methoxy-phenoxymethyl)-cyclopent-2-enol.     

Chemoenzymatic synthesis of the enantiomerically pure 1,2,3,4-tetrahydroquinoline moiety of the antithrombotic (21R)- and (21S)-argatroban

The synthetic antithrombotic argatroban is a dipeptide between the nonproteogenic (2R,4R)-4-methyl-2-piperidine carboxylic acid and l-arginine, in turn bonded to a 3-methyltetrahydroquinoline sulfonyl group; the drug is usually prepared and administered as a mixture of C-21-diastereoisomers. By means of a biocatalytic transformation enantiomerically pure (R)- and (S)-synthons, suitable for the synthesis of separate (21R)- and (21S)- argatroban, were obtained.     

Complexes of zinc,cadmium and mercury(II) with the zwitter-ionic form of NN′-ethylenebis (salicylideneimine)

The Schiff base NN′-ethylenebis(salicylideneimine), H₂ salen reacts with hydrous and anhydrous Zinc, Cadmium and Mercury(II) salts to give complexes M(H₂ salen)X₂·nH₂O (M = Zn, Cd, Hg; XCl, Br, I, NO₃; MZn, X₂SO₄; n = 0?2). Spectroscopic and other evidence indicated that; (i) halide and sulphate are coordinated to the metal ion, whereas the nitrate group is ionic in mercury nitrate compound and covalently bonded in zinc and cadmium nitrato complexes, (ii) the Schiff base is coordinated through the negatively charged phenolic oxygen atoms and not the nitrogen atoms, which carry the protons transferred from phenolic groups on coordination, (iii) therefore the coordination numbers suggested are 4-, in mercury and 4- or 6- in zinc and cadmium Schiff base complexes.     

(R)- and (S)-N-(Benzyloxycarbonyl)-3,4-epoxybutylamine. New 4-amino-2-hydroxybutyl synthons for the synthesis of hypusine reagents and (R)-6- and (S)-7-hydroxyspermidine

The synthesis and application of the chiral reagents (R)- and (S)-N-(benzyloxycarbonyl)-3,4-epoxybutylamine is described for the first time. These 4-amino-2-hydroxybutyl synthons are successfully employed in the assembly of two hydroxylated triamines, (R)-6- and (S)-7-hydroxyspermidine, and a previously described hypusine reagent, (2S,9R)-11-[(benzyloxycarbonyl)amino]-7-(benzyloxycarbonyl)-2-[(9-fluorenylmethoxycarbonyl)amino]-9-(tetrahydropyran-2-yloxy)-7-azaundecanoic acid, useful for solution- and solid-phase peptide synthesis.     

Synthesis of conjugated (1E,3E)- and (1Z,3Z)-1,4-di(n-pyridyl) (or n-quinolyl)-1,3-butadienes from n-(2′-chloroethenyl)pyridine (or quinoline)

The homocoupling reaction between the conjugated n-(2-chloroethenyl)pyridine; n, 2-, 3- and 4- (or quinoline; n, 2- and 4-) mediated by zero-valent nickel complexes at room temperature affords to the corresponding 1,4-diaryl-1,3-butadiene, always as the 1E,3E stereoisomer. The yield in 1,4-diaryl-1,3-butadiene increases with the nickel catalyst and hence, the active zero-valent nickel catalyst is not regenerated during the homocoupling reaction.The stereospecific synthesis of (1Z,3Z)-1,4-di(4′-pyridyl)-1,3-butadiene stereoisomer was efficiently carried out by partial hydrogenation of the appropriate 1,4-di(4′-pyridyl)-1,3-butadiyne.     

The application of (Z)-3-aryl-3-haloenoic acids to the synthesis of (Z)-5-benzylidene-4-arylpyrrol-2(5H)-ones

Studies directed at the synthesis of (Z)-5-benzylidene-4-arylpyrrol-2(5H)-ones from (Z)-3-aryl-3-haloenoic acids are described. The successful strategy relies on the preparation of (Z)-3-aryl-3-haloenoic acids from acetophenones through the corresponding (Z)-3-aryl-3-haloenals and the conversion of the (Z)-3-aryl-3-haloenoic acids to (Z)-5-benzylidene-4-aryl-5H-furan-2-ones. The furanones were subsequently treated with primary amines and dehydrated to the corresponding (Z)-5-benzylidene-4-arylpyrrol-2(5H)-ones.     

On the structure of Zn(II) and Cu(II) cyanin complexes in aqueous solution

B3LYP/6-31++G(d,p) optimizations on models for the metal cyanin, Cy, complexes [MCy(H₂O) _n ]⁺, (M = Zn(II), Cu(II); n = 2, 3, 4) in aqueous solution indicate that 4 is the most favoured coordination number in both cases. SP -4 and T -4 geometries are nearly isoenergetic for the former, while SP -4 is the only one obtained for the latter. Anionic cyanin displays higher affinity for Cu(II) than for Zn(II) or Mg(II). The electron density reorganization of cyanin model accompanying the complexation process was analyzed by means of the quantum theory of atoms in molecules. This analysis reveals that: (1) the O4′–M bond is stronger than O3′–M; (2) anionic cyanin displays a dual character between 4′-keto-quinoidal and 3′,4′-dienolate resonance forms; (3) Cu(II) takes more electron density than Zn(II) from Cy^? and water ligands; (4) when the coordination number increases, each ligand (Cy^? or water) transfers less electron density; (5) complex formation modifies the electron density in all the atoms of the ligands, but the largest modifications are displayed within the AC bicycle of Cy^?; and (6) a third part of density lost by the Cy^? ligand is removed from hydrogens.     

Synthesis, characterization, crystal structure and antimicrobial activities of new transN,N-substituted macrocyclic dioxocyclam and their copper(II) and nickel(II) complexes

New trans-disubstituted macrocyclic ligands, 1,8-[N,N-bis(3-formyl-12-hydroxy-5-methyl)benzyl]-5,12-dioxo-1,4,8,11-tetraazacyclotetradecane (L¹), 1,8-[N,N-bis(3-formyl-12-hydroxy-5-bromo)benzyl]-5,12-dioxo-1,4,8,11-tetraazacyclotetradecane (L²), N,N-bis[1,8-dibenzoyl]-5,12-dioxo-1,4,8,11-tetraazacyclotetradecane (L³), N,N-bis[1,8-(2-nitrobenzoyl)]-5,12-dioxo-1,4,8,11-tetraazacyclotetradecane (L⁴), and N,N-bis[1,8-(4-nitrobenzoyl)]-5,12-dioxo-1,4,8,11-tetraazacyclotetradecane (L⁵) were synthesized. The ligands were characterized by elemental analysis, FT IR, ¹H NMR and mass spectrometry studies. The crystal structure of L¹ is also reported. The copper(II) and nickel(II) complexes of these ligands were prepared and characterized by elemental analysis, FT IR, UV-Vis and mass spectral studies. The cyclic voltammogram of the complexes of ligand L^1-3 show one-electron quasi-reversible reduction wave in the region −0.65 to −1.13 V, whereas that of L⁴ and L⁵ show two quasi-reversible reduction peaks. Nickel(II) complexes show one electron quasi-reversible oxidation wave at a positive potential in the range +0.95 to +1.06 V. The ESR spectra of the mononuclear copper(II) complexes show four lines, characteristic of square-planar geometry with nuclear hyperfine spin 3/2. All copper(II) complexes show a normal room temperature magnetic moment value μ_eff 1.70-1.73 BM which is close to the spin only value of 1.73 BM. Kinetic studies on the oxidation of pyrocatechol to o-quinone using the copper(II) complexes as catalysts and hydrolysis of 4-nitrophenylphosphate using the copper(II) and nickel(II) complexes as catalysts were carried out. The ligands and their complexes were also screened for antimicrobial activity against Gram-positive, Gram-negative bacteria and human pathogenic fungi.     

Stereochemical aspects of the chemistry of 2-[trialkyl(aryl)silyloxy]alkyl-4-alkoxyalk-2-enylstannanes

2-tert-Butyldimethylsilyloxymethyl-4-(methoxymethoxy)pent-2-enyl(tributyl)stannane, prepared predominantly as the (Z)-isomer, is transmetallated by tin(IV) chloride to generate an allyltin trichloride which reacts with aldehydes with excellent stereocontrol in favour of (E)-1,5-syn-3-tert-butyldimethylsilyloxymethyl-5-(methoxymethoxy)alk-3-en-1-ols. These were taken through to 3-[(E)-2-(methoxymethoxy)-propylidenyl]-5-alkyl(aryl)tetrahydrofurans and used to prepare more complex 4-(methoxymethoxy)-pent-2-enylstannanes.     

New,simple, and efficient method for the synthesis of N-substituted 4-trifluoromethyl-5-(alkan-1-ol)-pyridin-2(1H)-imines

A new, simple, and efficient method for the synthesis a novel series of 1-substituted 4-(trifluoromethyl)-5-(alkan-1-ol)-pyridin-2(1H)-imines from the reaction of 3-(5,6-dihydro-4H-pyran-3-yl)-4,4,4-trifluorobut-2-enenitrile and 3-(4,5-dihydrofuran-3-yl)-4,4,4-trifluorobut-2-enenitrile with primary amines – is described. The products were obtained in 29–82% yield.     

A new approach to the synthesis of ethyl (4E)-alkenoates

A new approach to the preparation of ethyl (4E)-alkenoates was developed on the basis of Fe-catalyzed cross-coupling of ethyl (4E)-5-chloropent-4-enoate with the Grignard reagents. The starting ethyl (4E)-5-chloropent-4-enoate was obtained by alkylation of malonic ester of (E)-1,3-dichloropropene followed by decarbethoxylation.     

Investigations of chromium(III), manganese(III), tin(II) and lead(II) dithiocarbamate complexes

Piperidine-, morpholine-4-, N-methylpiperazine-4- and thiornorpholine-4-carbodithioate complexes of chromium(III), manganese(III), tin(II) and lead(II) are prepared and characterized by chemical analyses, spectroscopic methods (I.R. and electronic spectra), magnetic susceptibilities, conductivity measurements and mass spectra. The complexes are of the type M(R₂dtc)n, where n is the oxidation number of the metal ion. Where possible a tentative stereochemistry of the complexes is discussed on the basis of the results obtained. In all the complexes the dithiocarbamate ligands show bidentate behaviour.     

Synthesis of lithium,sodium, cesium,and calcium salts of (E)-4- or (E,S)-3-methyl-2-(5-arylisoxazol-3-yl)-methyleneaminobutanoic, (E,S)-4-methyl-2- or (E,2S,3S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic,and (E)-6-(5-arylisoxazol-3-yl)methyleneaminohexanoic acids

Preparative method for the synthesis of lithium, sodium, cesium, and calcium salts of (E)-4-(5-arylisoxazol-3-yl)methyleneaminobutanoic, (E)-6-(5-arylisoxazol-3-yl)methyleneaminohexanoic, (E,S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminobutanoic, (E,S)-4-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic and (E,2S,3S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic acids was developed by reacting 5-phenyl(4-tolyl)isoxazole-3-carbaldehydes with amino acids like 4-aminobutyric and 6-aminocaproic acids, L-valine, L-leucine or L-isoleucine in the presence of lithium hydride, sodium methoxide, cesium carbonate or calcium hydride in boiling methanol.     

Efficient synthesis of new 1-alkyl(aryl)-5-(3,3,3-trihalo-2-oxopropylidene)-1H-pyrrol-2(5H)-ones

The synthesis of 1-alkyl(aryl)-5-(3,3,3-trihalo-2-oxopropylidene)-1H-pyrrol-2(5H)-ones 5, 6a-d from 1-alkyl(aryl)-4-bromo-5-(3,3,3-trihalo-2-oxopropylidene)-1H-pyrrolidin-2-ones 3, 4a-d is reported. The 1-alkyl(aryl)-4-bromo-5-(3,3,3-trihalo-2-oxopropylidene)-1H-pyrrolidin-2-ones 3, 4a-d were obtained from regiospecific bromination of 1-alkyl(aryl)-5-(3,3,3-trihalo-2-oxopropylidene)-1H-pyrrolidin-2-ones 1, 2a-d with molecular bromine. The NMR and X-ray diffraction data showed that 1-alkyl(aryl)-5-(3,3,3-trihalo-2-oxopropylidene)-1H-pyrrolidin-2-ones were brominated at 4-position in the pyrrolidin-2-one ring.     

Chemical behavior of ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands in the presence of palladium(II) chloride

The synthesis, structural characterization, and coordination behavior of ditopic ortho-hydroquinone-based bis(pyrazol-1-yl)methane ligands (ortho-(OH)₂C₆H₃-4-CHpz₂, ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂, and ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂) with pyrazole, 3-phenylpyrazole, and 3-tert-butylpyrazole as donors are described. The reaction of a soluble PdCl₂-source with ortho-(OH)₂C₆H₃-4-CHpz₂ in acetonitrile yielded the related square-planar N,N-coordinated Pd(II) dichloride complex, whereas treatment of ortho-(OH)₂C₆H₃-4-CH(3-Phpz)₂ or ortho-(OH)₂C₆H₃-4-CH(3-tBupz)₂ with PdCl₂ in acetonitrile resulted in degradation of these ligands. The Pd(II) complexes trans-(3-PhpzH)₂PdCl₂ and trans-(3-tBupzH)₂PdCl₂ were isolated and fully characterized including X-ray diffraction analyses.     

Transformations of (1E,3E)-1-(benzoylamino)-4-(dimethylamino)buta-1,3-diene-1,2,3-tricarboxylates into pyridine and pyrrole derivatives

New, highly functionalised (1E,3E)-1-(benzoylamino)-4-(dimethylamino)buta-1,3-diene-1,2,3-tricarboxylates proved to be useful and versatile reagents in the formation of highly substituted pyridine, N-aminopyridine, pyrrole and pyrido[3,4-c]pyridazine derivatives. The formation of the particular type heterocyclic system is dependent on the starting (1E,3E)-1-(benzoylamino)-4-(dimethylamino)buta-1,3-diene-1,2,3-tricarboxylate. By an appropriate choice of different ester groups it is possible to drive the reactions towards the formation of either pyridine or pyrrole derivatives.     

Unusual result of the reaction of 4-(1-methyl-1H-imidazol-2-yl)methylene-substituted 2-alkylthioimidazol-5(4H)-one with copper(ii) chloride

A reaction of potassium ({(4Z)-4-[(1-methyl-1H-imidazol-2-yl)methylene]-5-oxo-1-phenyl-4,5-dihydro-1H-imidazol-2-yl}thio)acetate with copper(II) chloride in methanol leads to bis(5-anilino-7-methoxycarbonyl-1-methyl-1H-imidazo[1,2-c]pyrimidin-4-ium) tetrachloro-cuprate(II), whose structure was confirmed by the X-ray diffraction studies.