Synthesis of (<Emphasis Type="Italic">E</Emphasis>)- and (<Emphasis Type="Italic">Z</Emphasis>)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles

Abstract  An efficient synthesis method for the preparation of a series of new (Z)- and (E)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles was developed. The reaction of (Z)- and (E)-3-styrylchromones with hydrazine hydrate afforded the corresponding (Z)- and (E)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles, except for nitro derivatives, where both (Z)- and (E)-4′-nitro-3-styrylchromones afforded (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles. The reaction mechanism for these transformations is discussed and the stereochemistries of all products were established by NMR experiments. Graphical abstract        

Synthesis of (E)- and (Z)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles

Abstract  

An efficient synthesis method for the preparation of a series of new (Z)- and (E)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles was developed. The reaction of (Z)- and (E)-3-styrylchromones with hydrazine hydrate afforded the corresponding (Z)- and (E)-3(5)-(2-hydroxyphenyl)-4-styrylpyrazoles, except for nitro derivatives, where both (Z)- and (E)-4′-nitro-3-styrylchromones afforded (E)-3(5)-(2-hydroxyphenyl)-4-(4-nitrostyryl)pyrazoles. The reaction mechanism for these transformations is discussed and the stereochemistries of all products were established by NMR experiments.     

Stereospecific preparation of symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes from 1-bromo-1-fluoroalkenes

A straightforward method to prepare symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes is described. High E/Z ratio 1-bromo-1-fluoroalkenes, prepared by isomerization from the E/Z ≈ 1:1 isomeric mixtures, reacted with Bu₃SnSnBu₃ and Pd(PPh₃)₄ to afford (1Z, 3Z)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes in good yield. (Z)-1-Bromo-1-fluoroalkenes, which were prepared by kinetic reduction from 1-bromo-1-fluoroalkenes (E/Z ≈ 1:1), can undergo similar reaction with Bu₃SnSnBu₃ and Pd(PPh₃)₄/CuI to prepare (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes.     

Synthesis of conjugated (1E,3E)- and (1Z,3Z)-1,4-di(n-pyridyl) (or n-quinolyl)-1,3-butadienes from n-(2′-chloroethenyl)pyridine (or quinoline)

The homocoupling reaction between the conjugated n-(2-chloroethenyl)pyridine; n, 2-, 3- and 4- (or quinoline; n, 2- and 4-) mediated by zero-valent nickel complexes at room temperature affords to the corresponding 1,4-diaryl-1,3-butadiene, always as the 1E,3E stereoisomer. The yield in 1,4-diaryl-1,3-butadiene increases with the nickel catalyst and hence, the active zero-valent nickel catalyst is not regenerated during the homocoupling reaction.The stereospecific synthesis of (1Z,3Z)-1,4-di(4′-pyridyl)-1,3-butadiene stereoisomer was efficiently carried out by partial hydrogenation of the appropriate 1,4-di(4′-pyridyl)-1,3-butadiyne.     

The stereoselective synthesis of (E)-octafluoro-1,3,5-hexatriene and (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene

(E)-(1,2-Difluoro-1,2-ethenediyl)bis[tributylstannane], 3, readily undergoes a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction with iodotrifluoroethene to yield (E)-octafluoro-1,3,5-hexatriene, 4, in high isomeric purity. (1Z,3E,5Z)-(1,2,3,4,5,6-Hexafluoro-1,3,5-hexenetriyl)bis[tributylstannane], 7, was sequentially prepared from (1Z,3E,5Z)-(1,2,3,4,5,6-hexafluoro-1,3,5-hexenetriyl)bis[triethylsilane], 5, which was prepared via a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction of 3 with (E)-1,2-difluoro-1-iodo-2-triethylsilylethene, 6. Pd(PPh₃)₄/CuI cross-coupling of 7 with iodotrifluoroethene gave (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene, 8.     

Regioselective synthesis of 5-alkylidene and 5-(iodoalkylidene)-pyrrol-2(5H)-ones by halolactamisation of (2Z,4E)-dienamides and (Z)-alk-2-en-4-ynamides

Stereo- and regioselective synthesis of 5-alkylidene (arylidene) and 5-(iodoalkylidene)-pyrrol-2(5H)-ones was achieved from (2Z,4E)-dienamides and (Z)-alk-2-en-4-ynamides by halocyclisation reaction. Selectivity was found to be highly dependent on the nature of the substituents and on the temperature.     

(E)-3-Halo-2-styryl-4H-chromen-4-ones: synthesis and transformation to novel pyrazoles

New methods for the synthesis of (E)-3-halo-2-styryl-4H-chromen-4-ones were established. The reaction of these compounds with hydrazine hydrate afforded new and unexpected 3(5)-aryl-5(3)-[2-(2-hydroxyphenyl)-2-hydrazonoethyl]-1H-pyrazoles, which upon acid hydrolysis gave 3(5)-aryl-5(3)-[2-(2-hydroxyphenyl)-2-oxoethyl]-1H-pyrazoles. The reaction mechanisms for these transformations, involving 1,6- followed by 1,4-conjugate additions, are discussed and the structures of all new compounds were established by NMR studies.     

Stereospecific preparation of (1E,3E,5E)-3.4-difluoro-1,6-diphenylhexatriene and (2E,4E,6E)-diethyl-4,5-difluoroocta-2,4,6-trienedioate

Palladium(0) catalyzed coupling of β-bromostyrene (E/Z = 89/11) with (E)-(1,2-difluoro-1,2-ethenediyl)bis[tributylstannane], 1, in DMF at room temperature stereospecifically gave only (1E,3E,5E)-3,4-difluoro-1,6-diphenylhexatriene. Similarly, palladium(0) catalyzed coupling of (E)-ethyl 3-bromoacrylate as the vinyl halide precursor stereospecifically gave (2E,4E,6E)-diethyl-4,5-difluoroocta-2,4,6-trienedioate. This work demonstrates that a non-fluorine-containing vinyl bromide will selectively undergo coupling with 1 and enable the stereospecific preparation of a mixed polyene system. The (E)-ethyl 3-bromoacrylate coupling with 1 illustrates that mixed functionalized hexatriene systems can be easily accessed via this methodology. The X-ray structure of (2E,4E,6E)-diethyl-4,5-difluoroocta-2,4,6-trienedioate confirmed its structure.     

Different recognitions of (E)- and (Z)-1,1′-binaphthyl ketoximes using lipase-catalyzed reactions

Lipase-catalyzed hydrolysis of (E)-2-[α-(acetoxyimino)benzyl]-1,1′-binaphthyl [(±)-1a] and (Z)-2-[α-(acetoxyimino)benzyl]-1,1′-binaphthyl [(±)-1b] yielded optically active (E)-2-[α-(hydroxyimino)benzyl]-1,1′-binaphthyl [(S)-2a] and (Z)-2-[α-(hydroxyimino)benzyl]-1,1′-binaphthyl [(R)-2b], respectively, with high enantiomeric excess. Selectivity for the opposite enantiomer of the axial binaphthyl skeleton was shown by (Z)-isomer 1b against (E)-isomer 1a.     

Stereospecific preparation of (2E, 4Z)-monofluorodienyl esters by the Heck reaction of high E/Z ratio 1-bromo-1-fluorostyrenes

High E/Z ratio (E/Z>75:25) 1-bromo-1-fluorostyrenes, which were prepared by isomerization of 1-bromo-1-fluorostyrenes (E/Z≈1:1), underwent the Heck reaction with methyl acrylate, and (2E, 4Z)-methyl 5-aryl-4-fluoropenta-2,4-dienoates were successfully isolated. Heck reactions of (Z)-1-bromo-1-fluorostyrenes also occur. However, the products are difficult to separate in a pure form, since they have an obvious tendency to isomerize on a silica gel column.     

An improved synthesis of (2E,4Z)-6-(benzyloxy)-4-bromohexa-2,4-dien-1-ol

An improved synthesis of (2E,4Z)-6-(benzyloxy)-4-bromohexa-2,4-dien-1-ol has been devised. This new route increases the throughput and yield of the diene product by circumventing a low yielding preparation of boronic acid intermediate as well as removing the need to use multi-gram quantities of highly toxic thallium salts. In the process of developing this new route, a higher yielding preparation of (E)-3-hydroxyprop-1-enylboronic acid was also achieved.     

Stereoselective synthesis of 2-iodo-1-perfluoroalkyl-2(Z)-alkenes and E or Z-4-perfluoroalkylmethyl-4-en-2-ynol via Na2S2O4-promoted radical addition reaction of perfluoroalkyl iodides with allenes and the palladium-catalyzed kinetic resolution with Sonogashira coupling reaction

A Na₂S₂O₄-promoted radical addition reaction of perfluoroalkyl iodides with allenes has been studied in which a Z/E mixture of 2-iodo-1-perfluoroalkyl-2-alkenes 3 were afforded in 52-69% yields. A kinetic resolution using Sonogashira coupling reaction in MeCN using Et₂NH as the base was developed to synthesize the 2-iodo-1-perfluoroalkyl-2(Z)-alkenes (Z-3) and E-4-perfluoroalkylmethylalk-4-en-2-ynols (E-5) stereoselectively. A complete Sonogashira coupling procedure in Et₂NH at 40 °C was also developed affording a mixture of E and Z-4-perfluoroalkylmethyl-4-en-2-ynols (E-5 and Z-5), which may be easily separated by chromatography on silica gel.     

Practical synthesis of (E)- and (Z)-2-silyl-3-penten-1-ols with high enantiopurity

Practical methods for the synthesis of the optically active (E)- and (Z)-2-silyl-3-pentene-1-ols are described. The optically pure (E)-allylsilane was synthesized from commercially available (R)-3-butyn-2-ol in five steps involving hydrozirconation followed by alkylation of the resulting alkenylmetal with BnOCH₂Cl. On the other hand, both enantiomers of the corresponding (Z)-allylsilane were prepared from commercially available dimethylphenylvinylsilane through epoxidation, the regioselective epoxide-opening reaction with 1-propynylmagnesium bromide, and the subsequent optical resolution using a lipase.     

Synthesis of 4-(2-hydroxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-aryl-4,5-dihydro-1H-pyrrole-3-carboxylates, a new triazafulvalene system

(2E,3Z)-2-(1-Methyl-2,5-dioxoimidazolidin-4-ylidene)-3-[(arylamino- or heteroarylamino)methylene]succinate 5 obtained by [2+2] cycloaddition of (5Z)-5-[(dimethylamino)methylene]-3-methylimidazolidine-2,4-dione (1) and dimethyl acetylenedicarboxylate (2) followed by substitution of the dimethylamino group with aromatic or heteroaromatic amines, afforded by heating in ethanol in the presence of potassium hydroxide, potassium salts 6. Acidification of 6 with hydrochloric acid afforded mixtures of (E)- and (Z)-isomers of methyl 4-(2-hydroxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-phenyl-4,5-dihydro-1H-pyrrole-3-carboxylates. On the other hand, alkylation of compounds 6 with methyl iodide or benzyl bromide produced the corresponding methyl (E)-4-(2-methoxy- or 2-benzyloxy-1-methyl-5-oxo-1H-imidazol-4(5H)-ylidene)-5-oxo-1-phenyl-4,5-dihydro-1H-pyrrole-3-carboxylates 9, derivatives of a new triazafulvalene system.     

Synthesis and optical properties of a poly(2′,5′-dioctyloxy-4,4′,4″- terphenylenevinylene) with high content of (Z) vinylene units

Poly(2′,5′-dioctyloxy-4,4′,4″-terphenylenevinylene) with (E) configuration of the vinylene double bonds was prepared by Suzuki-Miyaura polymerization of (E)-4,4′-dibromostilbene and 2,5-dioctyloxy-1,4-benzenediboronic acid. Attempts to extend this simple procedure to the synthesis of the polymer with (Z) configuration, starting from (Z)-4,4′-dibromostilbene, were unsuccessful. However, the use of (Z)-4,4′-diiodostilbene and a careful choice of Pd catalyst and experimental conditions, lead to a material with a >95/<5 (Z)/(E) ratio of vinylene units. The investigation of optical properties of both the (E) and (Z) polymers evidenced that (Z) linkages act as defects which reduce the effective conjugation length in the polymer backbone.     

Regioselective biocatalytic hydrolysis of (E,Z)-2-methyl-2-butenenitrile for production of (E)-2-methyl-2-butenoic acid

Acidovorax facilis 72W nitrilase catalyzed the regioselective hydrolysis of (E,Z)-2-methyl-2-butenenitrile, producing only (E)-2-methyl-2-butenoic acid with no detectable conversion of (Z)-2-methyl-2-butenenitrile. (E)-2-Methyl-2-butenoic acid, produced in aqueous solution as the ammonium salt, was readily separated from (Z)-2-methyl-2-butenenitrile, and isolated in high yield and purity. The combination of nitrile hydratase and amidase activities of several Comamonas testosteroni strains were also highly regioselective for the production of (E)-2-methyl-2-butenoic acid from (E,Z)-2-methyl-2-butenenitrile.     

Cycloaddition reactions of ethyl (E)- and (Z)-3-fluoropropenoate

Ethyl (Z)-3-fluoropropenoate (Z-5) has been prepared in a pure state in 68% yield by a Wittig procedure developed by Burton. Ethyl (E)-3-fluoropropenoate (E-6) was prepared in 38% yield following the synthetic method of Purrington. The Z isomer gives cycloaddition with 1,3-diphenylisobenzofuran and cyclopentadiene to give a product with completely endo configurations. The E isomer also gives cycloadducts with same dienes to give mixtures of endo and exo products.     

Photochemical synthesis of isomeric (E/Z)-3-alkylidene-3H-isobenzofuranones

The synthesis of isomeric (E/Z)-3-alkylidene-3H-isobenzofuranones by photoisomerization of 2-aroyl-2-methyl/benzylindan-1,3-diones in high yields is described.     

N-Nitrosation of (E)-2-(benzylidene-amino)ethanols

Reaction of (E)-2-(benzylidene-amino)ethanol 2 with nitric oxide afforded an (E)-rotamer dominant mixture of (E)- and (Z)-N-nitroso-2-aryl-1,3-oxazolidine 3 at room temperature in good overall yields.     

Novel diastereoselective synthesis of (E)- and (Z)-allylsilanes via organoboranes

A simple, novel diastereoselective synthesis of both (E)- and (Z)-allylsilanes via organoboranes is developed. (E)-1-Alkenylboronate esters easily prepared from the corresponding terminal alkynes via hydroboration with dibromoborane-methyl sulfide complex followed by treatment with 1,3-propane diol readily react with trimethylsilylmethyllithium at −78 °C in methanol followed by reaction with iodine in methanol to produce the corresponding (Z)-allylsilanes in high yields (72-80%) and in high stereochemical purities (98% as evidenced by CMR spectral data). Similarly, the (Z)-1-alkenylboronate esters react with trimethylsilylmethyllithium at −78 °C in methanol followed by treatment with iodine in methanol to produce the corresponding (E)-allylsilanes in moderate yields (57-65%) in high stereochemical purities (>98% as revealed by CMR spectral data).