Optical fiber strain and temperature sensor based on an in-line Mach–Zehnder interferometer using thin-core fiber

We propose and demonstrate a fiber in-line Mach–Zehnder interferometer using thin-core fibers. This in-line interferometer is composed of a short section of thin-core fiber inserted between two single mode fibers (SMF), and demonstrated as a strain and temperature sensor in this study. A strain sensitivity of ?1.83 pm/με with a measurement range of 0?2000 με, and the temperature sensitivity of ?72.89 pm/°C with a temperature variation of 50 °C are achieved. We also discussed that the influence of strain and temperature change on the relative power ratios among the excited cladding modes in thin-core fibers.     

Twist sensor based on Sagnac single-mode optic fiber interferometer

An optical fiber twist sensor based on Sagnac single-mode optic fiber interferometer is proposed. The stress-induced birefringence of single-mode optical fiber is obtained by applying a transverse force against a short length of singlemode fiber. A high sensitivity and resolution of the twist angle measurement of 0.19 nm/° and 0.002° is achieved experimentally, respectively. The proposed sensor is more convenient and simple than that of standard polarization-maintaining fibers.     

Temperature self-compensation fiber-optic pressure sensor based on fiber Bragg grating and Fabry–Perot interference multiplexing

A high performance multiplexed fiber-optic sensor consisted of diaphragm-based extrinsic Fabry–Perot interferometer (DEFPI) and fiber Bragg grating (FBG) is proposed. The novel structure DEFPI fabricated with laser heating fusion technique possesses high sensitivity with 5.35 nm/kPa (36.89 nm/psi) and exhibits ultra-low temperature dependence with 0.015 nm/°C. But the ultra-low temperature dependence still results in small pressure measurement error of the DEFPI (0.0028 kPa/°C). The designed stainless epoxy-free packaging structure guarantees the FBG to be only sensitive to temperature. The temperature information is created to calibrate the DEFPI's pressure measurement error induced by the temperature dependence, realizing effectively temperature self-compensation of the multiplexed sensor. The sensitivity of the FBG is 10.5 pm/°C. In addition, the multiplexed sensor is also very easy to realize the pressure and the temperature high-precise high-sensitive simultaneous measurement at single point in many harsh environmental areas.     

基于薄芯光纤模态干涉技术的曲率光纤传感器

提出了一种新的基于薄芯光纤模态干涉技术的光纤曲率传感器。在单模光纤的中间部分插入薄芯光纤用于传感光路,没有插入薄芯光纤的单模光纤用于参考光路,以消除环境对曲率测量的影响。由于插入的薄芯光纤和单模光纤纤芯失配,导致包层的高次模被激发,并与纤芯模在单模光纤内形成干涉。当改变薄芯光纤的曲率时,沿纤芯和包层传播的模态和光纤长度会发生改变,使得干涉谷峰发生平移。将传感光纤的两端固定的平移台上,当调节平移台距离时,薄芯光纤的曲率发生改变,导致干涉谷峰向短波方向平移。通过观察谷峰的平移距离可以实现曲率的传感测量。实验表明,该装置具有低损耗、低成本和高灵敏度的特点。     

Simultaneous measurement of refractive index and temperature using thinned fiber based Mach–Zehnder interferometer

A novel method for simultaneous measurement of refractive index and temperature based on a small core and cladding diameters thinned fiber Mach–Zehnder interferometer (MZI) using singlemode-multimode-thinned-multimode-singlemode (SMTMS) fiber structure is proposed. Experiments indicate that the selected two interference orders have sensitivities of ?16.1936 nm/RIU and 0.0534 nm/°C, and ?23.0473 nm/RIU and 0.0575 nm/°C, respectively, among RI range from 1.3325–1.3720 and temperature range from 22 °C–82 °C. We can thus use the coefficient matrix of these two peaks to simultaneously determine the surrounding refractive index and temperature. The fabrication is easy, safe and cost effective, includes only the fusion splicing, making the device properly attractive for practical sensor applications.     

Hydrostatic pressure effects on the fluorescence of tyrosine solution with different concentrations of copper ion

The effects of hydrostatic pressure on the fluorescence of tyrosine (Tyr) solution with different concentrations of copper ion (Cu²⁺) were investigated. The fluorescent intensity of pure Tyr aqueous solution enhanced with the increase of hydrostatic pressure, the fluorescent intensity increased by 8.8% when the pressure was up to 60 MPa. The fluorescence of Tyr aqueous solution was quenched obviously due to complex formation with Cu²⁺ and the quenching became stronger when the concentration of Cu²⁺ was higher. When the concentration ratio of Cu²⁺ and Tyr ([Cu²⁺]/[Tyr]) increased from 0 to 40, the fluorescent intensity decreased to 19.0% at 0.1 MPa and 24.2% at 60 MPa. It was also found that the effects of pressure on the fluorescent intensity of Tyr aqueous solution were different at various [Cu²⁺]/[Tyr]. The fluorescent intensity increased by 14.4% and 38.4% for 1 and 40 ratio respectively when the pressure was changed from 0.1 MPa to 60 MPa.     

Resolution and sensitivity enhancements in strong grating based fiber Fabry–Perot interferometric sensor system utilizing multiple reflection beams

We investigate an asymmetric intensive fiber Bragg grating (FBG) defined Fabry–Perot (F–P) sensor system decoded by a multiple-path-matched Michelson interferometer. The interrogation of higher order reflection beams cannot only solve the problem of the degraded resolution induced by the spectral mismatch of the FBGs, but also amplify the effect of the fiber strain on the phase of the light. We demonstrate multiple reflection beams in the F–P cavity based on the concept of the FBG effective length for constructing respective interrogation interferometers, and present a cost function with optimized system parameters to improve noise properties. The performances of interrogating the second, third and fourth order reflection beams are compared in a strain sensing experiment arrangement. Under the condition of the same optical path length mismatch, the interrogation of the fourth order reflection beam can achieve 9.8 dB sensitivity enhancement and 3 dB resolution promotion compared with the result using the second order reflection beam.     

Distributed fiber sensing system with wide frequency response and accurate location

A distributed fiber sensing system merging Mach–Zehnder interferometer and phase-sensitive optical time domain reflectometer (Φ-OTDR) is demonstrated for vibration measurement, which requires wide frequency response and accurate location. Two narrow line-width lasers with delicately different wavelengths are used to constitute the interferometer and reflectometer respectively. A narrow band Fiber Bragg Grating is responsible for separating the two wavelengths. In addition, heterodyne detection is applied to maintain the signal to noise rate of the locating signal. Experiment results show that the novel system has a wide frequency from 1 Hz to 50 MHz, limited by the sample frequency of data acquisition card, and a spatial resolution of 20 m, according to 200 ns pulse width, along 2.5 km fiber link.     

Fiber curvature sensor based on spherical-shape structures and long-period grating

A novel curvature sensor based on optical fiber Mach–Zehnder interferometer (MZI) is demonstrated. It consists of two spherical-shape structures and a long-period grating (LPG) in between. The experimental results show that the shift of the dip wavelength is almost linearly proportional to the change of curvature, and the curvature sensitivity are −22.144 nm/m⁻¹ in the measurement range of 5.33–6.93 m⁻¹, −28.225 nm/m⁻¹ in the range of 6.93–8.43 m⁻ and −15.68 nm/m⁻¹ in the range of 8.43–9.43 m⁻¹, respectively. And the maximum curvature error caused by temperature is only −0.003 m⁻¹/°C. The sensor exhibits the advantages of all-fiber structure, high mechanical strength, high curvature sensitivity and large measurement scales.     

基于薄芯光纤模态干涉技术的折射率 传感特性实验研究

报道了一种具有微结构缺陷的折射率传感器,并对其折射率特性进行了实验研究.将一部分薄芯光纤熔接于标准单模光纤中,由于插入的薄芯光纤和单模光纤纤芯失配,导致包层的高次模被激发并与纤芯模在单模光纤内形成干涉仪.通过减小薄芯光纤的包层直径,以增强包层中的传输模在环境中的倏逝场,从而提高对环境折射率测量的灵敏度.实验表明,该折射率传感器具有损耗低、成本低、灵敏度高和线性度好等特点.     

Fabry–Pérot cavities based on chemical etching for high temperature and strain measurement

In this paper, two hybrid multimode/single mode fiber Fabry–Pérot (FP) cavities were compared. The cavities fabricated by chemical etching are presented as high temperature and strain sensors. In order to produce this FP cavity a single mode fiber was spliced to a graded index multimode fiber with 62.5 μm core diameter. The Fabry–Pérot cavities were tested as a high temperature sensor in the range between room temperature and 700 °C and as strain sensors. A reversible shift of the interferometric peaks with temperature allowed to estimate a sensitivity of 0.75 ± 0.03 pm/°C and 0.98 ± 0.04 pm/°C for the sensor A and B respectively. For strain measurement sensor A demonstrated a sensitivity of 1.85 ± 0.07 pm/μ? and sensor B showed a sensitivity of 3.14 ± 0.05 pm/μ?. The sensors demonstrated the feasibility of low cost fiber optic sensors for high temperature and strain.     

All-fiber intermodal Mach–Zehnder interferometer based on a long-period fiber grating combined with a fiber bitaper

We report a novel all-fiber narrow-bandwidth intermodal Mach–Zehnder interferometer (MZI) based on a long-period fiber grating (LPFG) combined with a fiber bitaper, and the MZI has no special limit for the resonant wavelength of the LPFG. Its responses to temperature and axial strain are studied theoretically and experimentally. Experimental results indicate that the temperature sensitivity is 0.0585 nm/°C within the temperature range from 30 °C to 90 °C and the axial strain sensitivity of 0.00013 nm/με can be neglected. Furthermore, as only the common single-mode fiber (SMF) is required during the fabrication process, the proposed device is cost effective and has good practicability in the optical sensing systems.     

Pressure and temperature characterization of two interferometric configurations based on suspended-core fibers

In this work, two all-fiber interferometric configurations based on suspended core fibers (SCF) are investigated. A Fabry–Pérot cavity (FPC) made of SCF spliced in-between segments of single-mode and hollow-core fiber is proposed. The interferometric signals are generated by the refractive-index mismatches between the two fibers in the splice region and at the end of the suspended-core fiber. An alternative sensing head configuration formed by the insertion of a length of SCF as a birefringence element in a Sagnac loop interferometer is also demonstrated. In this structure, the interferometric signals are generated by interfering two counter propagating beams with different polarization states which propagate through a length of SCF as a birefringence element. The sensitivity to pressure and temperature was determined for both configurations. The results show that the pressure sensitivities are ? 4.68 × 10^? 5 nm/psi and 0.032 nm/psi for FPC and Sagnac loop interferometers, respectively. The temperature sensitivity of both structures has been obtained and the results have been discussed.     

High-pressure dielectric studies of a novel hydrogen-bonded ferroelectric (NH4)2H2P2O6

The hydrostatic pressure effect on the dielectric properties of (NH₄)₂H₂P₂O₆ ferroelectric crystal was studied for pressures from 0.1 MPa to 360 MPa and for temperatures from 100 to 190 K. The pressure–temperature phase diagram obtained is linear with increasing pressure. The paraelectric–ferroelectric phase transition temperature decreases with increasing pressure with the pressure coefficient dT_c/dp=?5.16×10^?2 K MPa^?1. Additionally, the pressure dependences of Curie–Weiss constants for the crystal in paraelectric (C₊) and ferroelectric (C_?) phases are evaluated and discussed. The possible mechanism of paraelectric–ferroelectric phase transition is also discussed.     

Simple air-gap fiber Fabry–Perot interferometers based on a fiber endface with Sn-microsphere overlay

This study presents a simple, cost-effective and sensitive air-gap fiber Fabry–Perot interferometer (AG-PPFI) which is based on a metal Tin (Sn)-overlaying fiber technique. An extremely small drop of metallic Sn was heated and then melted to shrink into a microsphere owing to the cohesion of the material. When a fiber was inserted into the melting Sn microsphere, an air gap was naturally formed between the fiber endface and the metal Sn during the cooling process. By carefully controlling the reaction time, various air-gaps can be formed as the Fabry–Perot interferometric cavities for the proposed AG-PPFIs. Measurements reveal that a smaller length of air-gap and heavier mass of Sn-microsphere are associated with higher sensitivity of temperature, but the former is dominated. A best temperature sensitivity of wavelength shift with +4.3 nm/°C is achieved when the air-gap is about 5 μm with mass of Sn-microsphere of about 10 μg. The variation of the wavelength shift is equivalent to sensitivity for a change in the cavity length of +14.83 nm/°C.     

A linearly-polarized tunable Yb-doped fiber laser using a polarization dependent fiber loop mirror

A Ytterbium-doped linearly-polarized fiber laser is constructed with a polarization maintaining fiber Sagnac loop mirror. The fiber loop mirror made of polarization maintaining fiber coupler has a polarization dependent reflectivity, which provides the necessary polarization discrimination between the slow and fast axes. With a fiber Bragg grating written in normal polarization maintaining fiber as an output coupler, laser output of up to 5.6 W at 1070 nm is generated with a polarization extinction ratio of > 20 dB and an overall efficiency of 55%. The broadband polarization dependent reflection of the fiber loop mirror offers advantages of easy spectral tuning and simple linearly-polarized laser generation.     

An all-fiber high resolution fiber grating concentration sensor

An all-fiber high resolution optical fiber grating concentration sensor has been studied theoretically and experimentally. A long period grating is used as the sensor head and a wavelength matched fiber Bragg grating is used as an interrogator to convert wavelength into intensity encoded information for interrogation. A concentration resolution of 0.104 g/L for NaCl solution is realized in experiment. The all-fiber sensor system, with the sensor head and the interrogator being all optical fiber components, is suitable for far-distance monitoring. The sensor system is with multifunction and can be used for temperature monitoring. A temperature resolution of 0.013 °C has realized in experiment.     

Photonic crystal fiber sensor based on hybrid mechanisms: Plasmonic and directional resonance coupling

We propose a special refractive index sensor design based on a photonic crystal fiber. Two analyte channels are introduced, with one analyte channel coated with gold layer and the other one without gold layer. A hybrid resonance method is used in the sensor to achieve a large dynamic index range, where surface plasmon resonance occurs when the analyte index is lower than that of the fiber material, while the core mode couples with the resonant mode of the adjacent analyte-filled cylinder when the analyte index is larger than the fiber material. When considering fluorinated polymer fibers, a broad index range of analyte refractive index from 1.25 to 1.45 with high sensitivity can be achieved. The maximal sensitivities reach 1.4 × 10⁴ nm/RIU and 2.7 × 10⁴ nm/RIU respectively when refractive index is in the range of 1.25 to 1.383 and 1.383 to 1.45. The sensor characteristics, make this simple sensor very interesting for detecting a wide range of fluid's refractive index or chemical agent concentration.     

Microfiber Mach-Zehnder interferometer embedded in low index polymer

Microfiber Mach Zehnder Interferometer (MMZI) is demonstrated by micromanipulating an optical microfiber drawn from a single mode fiber (SMF) using a flame brushing technique. The MMZI shows good interference fringes with an extinction ratio of 13 dB and a free spectral range (FSR) of 0.52 nm at 1530 nm. The MMZI is then embedded in a polymer with the refractive index of 1.36 to increase the stability and robustnes of the device. It is found that the transmission spectrum of the packaged MMZI is changed by the polymer, which increases the FSR to 0.83 nm. The degradation in transmission loss and extinction ratio are attributed to the disturbance at the coupling area during the packaging. Compared with waveguide based mach zehnder interferometer, the proposed MMZI is favoured due to easy fabrication, compact size, and easy integration with the fiber system.     

Microstructure of multilayer interface in an Al matrix composite reinforced by TiNi fiber

A multilayer interface was formed in the Al matrix composite which was reinforced by 30% volume fraction of TiNi fiber. The composite was fabricated by pressure infiltration process and the interface between the TiNi fiber and Al matrix was investigated by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). When the TiNi fiber was pre-oxidized in the air at 773 K for 1 h, three layers have been found and characterized in the interface: TiNi–B₂ layer near the TiNi fiber, Ti–Al compound layer with Ti and granular TiO₂ near the Al matrix, and Ti–Ni compound layer between TiNi–B₂ and Ti–Al compound layers. The effect of the multilayer interface on the mechanical properties of the composite was also discussed. The result showed that the uniaxial tensile strength of the composite at room temperature was 318 MPa, which was very close to the theoretical calculation value of 326 MPa. Moreover, the composite with good ductility exhibited a typical ductile-fracture pattern.